Why is Dreamweaver STILL working so slowly?

I think I've tried the tricks listed elsewhere, but my Dreamweaver 2014.1, running on an iMac running 10.10.1, is still spinning after every action and taking minutes to complete a simple task.

Does this occur with all sites and files or just certain ones?
If it's to limited to certain files, ensure your code is valid and free of errors.
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Also look for and change any null protocol links to Typekit or other 3rd party servers from //: to http:// or https:// links. This will greatly improve DW performance.
Nancy O.

Similar Messages

I upgraded for Firefox 4 and now my simplePass identity protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE.

I upgraded for Firefox 4 and now my HP SimplePass Identity Protection (biometric scanner) on my laptop will not work. WHY? It still works with IE but I don't use IE. It worked with the previous Firefox version but now when I use the internet, it doesn't even acknowledge I have the scanner. When I run my finger over it, it opens the settings panel but does not allow use of the already saved information or allow new information to be entered. I need this corrected. Any suggestions?

I asked this same question, and just received a response:
"Thank you for contacting DigitalPersona. There will be no update releases
for DigitalPersona Personal in the future. There will be no updates for
Firefox 4 nor Internet Explorer 9. IF they work they work, if they do
not work with DPPersonal, then you will have to decide to either keep
DPPersonal and forgo Firefox 4 or IE 9, or vice versa. DigitalPersona
is leaving the consumer market and is focusing on business applications.
In fact, DigitalPersona Personal will not longer be supported after
Mid-April of this year.
We apologize for any inconvenience this might cause. Sincerely, Tech Team "
In other words, there will be NO update.

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger is not supported with device screen every minute or two. I powered it off for the night. I havent experienced problems since. Why does it still work?

I dropped my iphone 3gs in water and grabbed it immediately out. It gave me a charger not supported sign every minute or two. I decided to turn it off for the night and the next morning it worked fine and only the bottom sensor was triggered. Why does it still work and how long will it last?

Water in itself will not kill electronic components if you let it dry out. Your first reaction to turn it off was a good one but you could have waited even longer.
It also depends what's on your water that will stay after the water itself had dried; like salt. Anything that iseither acid or conductor left on the circuit board will reduce the life of the board. Given said this, no one could state how long your iPhone will work since no one will know for sure where the water had time to infiltrate before you removed your device and no one what's may left there.
Consider yourself lucky. I don't understand however what you mean by a sensor triggered.

Why my macboock pro works so slowly?

The last months my macbook works slowly, I've made a EtreCheck but I don't understand de problem. Can you help me?
EtreCheck version: 1.9.11 (43) - report generated 15 de junio de 2014 11:03:38 GMT+2
Hardware Information:
 MacBook Pro - model: MacBookPro5,5
 1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
 4 GB RAM
Video Information:
 NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
 OS X 10.9.3 (13D65) - Uptime: 2 days 3:21:24
Disk Information:
 ST9250315ASG disk0 : (250,06 GB)
 EFI (disk0s1) <not mounted>: 209,7 MB
 Macintosh HD (disk0s2) / [Startup]: 249,2 GB (58,25 GB free)
 Recovery HD (disk0s3) <not mounted>: 650 MB
 MATSHITADVD-R UJ-868
USB Information:
 Apple Inc. Built-in iSight
 Apple Internal Memory Card Reader
 Apple Inc. Apple Internal Keyboard / Trackpad
 Apple Computer, Inc. IR Receiver
 Apple Inc. BRCM2046 Hub
 Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
 Mac App Store and identified developers
Kernel Extensions:
 [kext loaded] at.obdev.nke.LittleSnitch (4052 - SDK 10.8) Support
 [not loaded] com.markspace.driver.RemoteNDIS (430) Support
 [not loaded] com.roxio.TDIXController (1.7) Support
Startup Items:
 MissingSyncListener: Path: /Library/StartupItems/MissingSyncListener
Launch Daemons:
 [running] at.obdev.littlesnitchd.plist Support
 [loaded] com.adobe.fpsaud.plist Support
 [running] com.intego.commonservices.daemon.plist Support
 [loaded] com.intego.commonservices.icalserver.plist Support
 [loaded] com.intego.commonservices.metrics.kschecker.plist Support
 [running] com.intego.netupdate.daemon.plist Support
 [running] com.intego.task.manager.daemon.plist Support
 [failed] com.intego.VirusBarrier.daemon.plist Support
 [failed] com.intego.VirusBarrier.logger.daemon.plist Support
 [failed] com.intego.VirusBarrier.scanner.daemon.plist Support
 [running] com.intego.VirusBarrierX6.daemon.plist Support
 [running] com.intego.VirusBarrierX6.scanner.daemon.plist Support
 [loaded] com.microsoft.office.licensing.helper.plist Support
Launch Agents:
 [running] at.obdev.LittleSnitchUIAgent.plist Support
 [not loaded] com.intego.commonservices.statusitem.plist Support
 [running] com.intego.netupdate.agent.plist Support
 [loaded] com.intego.task.manager.notifier.plist Support
 [loaded] com.intego.VirusBarrierX6.alert.plist Support
 [not loaded] com.intego.VirusBarrierX6.statusitem.plist Support
User Launch Agents:
 [loaded] com.adobe.ARM.[...].plist Support
 [loaded] com.adobe.ARM.[...].plist Support
 [loaded] com.google.keystone.agent.plist Support
 [failed] com.veoh.webplayer.startup.plist Support
 [failed] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
 GrowlHelperApp
 GrowlHelperApp
 iTunesHelper
 Caffeine
 EvernoteHelper
 iTunes
 Jumpcut
 TomTomHOMERunner
 TomTomHOMERunner
 GetBackupAgent
Internet Plug-ins:
 JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
 FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
 Default Browser: Version: 537 - SDK 10.9
 Flash Player: Version: 13.0.0.214 - SDK 10.6 Outdated! Update
 AdobePDFViewer: Version: 9.5.5 Support
 DivXBrowserPlugin: Version: 2.0 Support
 QuickTime Plugin: Version: 7.7.3
 OfficeLiveBrowserPlugin: Version: 12.2.0 Support
 SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
 iPhotoPhotocast: Version: 7.0
Safari Extensions:
 Slick Savings: Version: 2.0
 Searchme: Version: 1.3
 Amazon Shopping Assistant: Version: 1.1
 JavaScript Blacklist: Version: 1.0.1
 BackTrack: Version: 1.3.1
 LastPass: Version: 3.1.31
 Ebay Shopping Assistant: Version: 1.1
 Slick Savings: Version: 1.0
Audio Plug-ins:
 BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
 AirPlay: Version: 2.0 - SDK 10.9
 AppleAVBAudio: Version: 203.2 - SDK 10.9
 iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
 Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User iTunes Plug-ins:
 TuneUp Visualizer: Version: 2.2.0 Support
User Internet Plug-ins:
 fbplugin_1_0_3: Version: (null) Support
3rd Party Preference Panes:
 DivX Support
 Flash Player Support
 Growl Support
 MacFUSE Support
 NetUpdate Support
Time Machine:
 Skip System Files: NO
 Auto backup: NO - Auto backup turned off
 Volumes being backed up:
 Macintosh HD: Disk size: 232.09 GB Disk used: 177.84 GB
 Destinations:
 Copias de seguridad de Time Machine [Local] (Last used)
 Total size: 465.44 GB
 Total number of backups: 28
 Oldest backup: 2011-07-12 14:58:20 +0000
 Last backup: 2014-04-27 17:40:46 +0000
 Size of backup disk: Too small
 Backup size 465.44 GB < (Disk used 177.84 GB X 3)
 Time Machine details may not be accurate.
 All volumes being backed up may not be listed.
Top Processes by CPU:
 5% iTunes
 2% WindowServer
 2% hidd
 2% Safari
 1% sysmond
Top Processes by Memory:
 135 MB Safari
 132 MB com.apple.WebKit.WebContent
 131 MB iTunes
 78 MB com.apple.IconServicesAgent
 74 MB Mail
Virtual Memory Information:
 203 MB Free RAM
 1.46 GB Active RAM
 1.23 GB Inactive RAM
 478 MB Wired RAM
 1.30 GB Page-ins
 321 MB Page-outs

MacKeeper is a known troublemaker, and is also the subject of two separate class-action lawsuits alleging fraud. Uninstall it immediately!
Intego VirusBarrier can have a significant negative impact on system performance. I don't generally recommend it, and would recommend uninstalling it.
Also, having two different apps with active anti-virus components installed is never a good idea, and note that this hasn't prevented you from being infected with the Spigot adware. You probably got infected with this by downloading software from somewhere like Download.com. (See Boycott CNET’s Download.com.)
For help removing Spigot, see my Adware Removal Guide.
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

MacBook Air has a dark screen and works very slowly - what is happening?

I have a MacBook Air since July '10, and until a few weeks ago, it seemed to be working fine.
A couple of weeks ago I wanted to update iTunes and GarageBand, but since I couldn't find my charger and I really needed to update my iTunes, I just let it update without a charger. It seemed to be fine and I think I either switched it of or left it on sleep mode overnight (I don't quite remember). The next day, I opened it normally and it worked very slowly, it kept freezing and that little colorful rotating ball appeared every time I tried to turn on a simple program, like Chrome or something. I restarted it numerous times (it froze so much that I couldn't even force end the programs) and left it turned off overnight, but nothing helped. A few days after that I backed my MacBook up using Time Machine and deleted stuff I don't need (I previously used over 80 GB out of the 100 GB originally available). I went down to about 30 GB of space taken up, and after that my Mac started to work fine, except for the occasional freezes. It still wasn't as fast as it was before (I couldn't open a few tabs at the same time in Chrome, or two programs at the same time, without it continually freezing), but it worked fine so I just assumed it was because of all the space taken up. The occasional freezes still annoyed me, though (plus I couldn't put pictures on it because I was scared that the freezes would occur again), so I thought I could reinstall Snow Leopard. It seemed to work fine, so I just left it there as it installed. A while after that, the backlighting switched off, as it usually does after a while. What worried me, though, is that even when I pressed F2 or moved the mouse or pressed something on the keyboard, the screen would not become light again. The light was extremely dim and I could barely make out what it said on the screen, but it was bright enough that I read a message saying that Snow Leopard failed to install, and asking whether I'd like to try again. I restarted the laptop and the screen was not only very dark (the white screen that normally appears was now dark grey), but it also took a really long time to turn on. A few minutes passed before the Apple logo appeared, and it took about 5 minutes (in comparison to the usual few seconds that it takes me to switch it on) to fully load. Naturally, it still worked extremely slowly and kept freezing when it turned on, in addition to the fact that the screen was dim.
Could someone please help me? I am completely not a Mac expert so I have no idea what the issue might be.

Usually signals memory problem.

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

My free apps purchased using my cousin's apple id won't open anymore on my iphone but apps donwloaded using my own apple id still works. Why is it like that and how can I make apps purchased using my cousin's apple id work on my iphone? Help!

Welcome to the Apple Community.
Delete the apps purchased by your cousin and purchase your own.

My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

My imessage has just stopped working with one of my contacts, on both of our phones imessage still works with other contacts. Why can we imessage others but not each other?

Yes... to no avail

Why do attachments still not work in outlook on ipad 4

why is this still aproblem

i go into safari, open up hotmail acoount and now its outlook the attachments don't work. I can send mail in with attachments (pictures) I can view them on my ipad, but when trying to forward the message with the attachment nothing is there. In a new message the paperclip does not work and I can't cut and paste attachments between in and out mails, or I don't know how to. Been into this forum and lot of people have the same problem, just hoped apple would have it fixed by now.

Shutter sound of my iphone4s camera still working even in silent mode. Why is it happen?

Even when i turn my iphone to silent mode, the shutter sound of the camera still working. Why is it happen?

Plug it into power, and hold down the home and the sleep/wake button for 30 seconds.
If this doesn't work chances are something is wrong with your iPhone, I'd suggest taking it to an Apple Retail store. www.apple.com/retail (You can change your country at the bottom of the page if need be, that's for the US)
Also, if you look in the headphone jack... or look into the bottom where the dock connector plugs in... and you see a red circle... You've set off the Liquid Contact Indicators in your iPhone by getting liquid in your unit. That would definately be a reason for your iPhone to not be working.

Why does Siri still not work in Australia???

It has almost been 6 month since apple released the 4s. I purchased it because I had never owned an apple product. Siri looked amazing in what it could do that's why I got it. To find out it wasn't working to its full extent in australia was very very diss appointing. As it has been so long since its release I really want to know why this is still not resolved??

This is the iPhone 4S page on the Apple Australia website, Siri is plainly marked as BETA, which mans still in development. Perhaps you lot should stop playing with the Joeys and pay more attention.

Why doesn't the "zoom in/out" via pinching the trackpad on my mac not work anymore with firefox? It worked before and still works with Safari.

why doesn't the "zoom in/out" feature by pinching the trackpad on my mac work anymore with firefox? It worked about a month ago, and still works on Safari.

Some gestures have been removed in Firefox 4 and later.
You can restore the zoom feature by changing the values of the related prefs on the about:config page.
browser.gesture.pinch.in -> cmd_fullZoomReduce
browser.gesture.pinch.in.shift -> cmd_fullZoomReset
browser.gesture.pinch.out -> cmd_fullZoomEnlarge
browser.gesture.pinch.out.shift -> cmd_fullZoomReset
browser.gesture.pinch.latched -> false
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Why the firefoks 3.6.3. work too slowly in windows 7 64 bit , and very slowly open the page.

Why firefoks work too slowly in windows 7 64 bit and anytime he very slowly open a page . ( not meter what page is about ).
== This happened ==
Not sure how often
== J install windows 7 64 bit

Open this document http://kb2.adobe.com/cps/191/tn_19166.html
download the uninstaller mentioned in section 1 (save to disk);
download the executable installer from section 5 (save to disk);
run the downloaded uninstaller;
reboot Windows;
run the downloaded installer.
Does the test page now show the correct version?

Why are you still selling iphone 4 when it dont work in your hand tryed a rubber sleeve and still no signal in my hand.

why are you still selling iphone 4 when it dont work in your hand tryed a rubber sleeve and still no signal in my hand.i think they should all be called back or given the iphone 5 free in its place.

http://www.heise.de/mac-and-i/kolumnen/artikel/Die-geheimnisvolle-iPhone-Energie -1226682.html?view=zoom;zoom=1
Step 1: take an empty glass, put the iphone into the glass as shown in the picture.
Step 2: stare in disbelief about this BS really helping

I have a new iPod and soon as I turned it on, it wanted me to upgrade it to the new IOS 6.0.1. Ever since then, my imessages won't work. I've reset it and everything and it still doesn't. So why won't it work?

I have a new iPod and soon as I turned it on, it wanted me to upgrade it to the new IOS 6.0.1. Ever since then, my imessages won't work. I've reset it and everything and it still doesn't. So why won't it work?

Without knowing what happens when you try:
iOS: Troubleshooting FaceTime and iMessage activation
iOS: Troubleshooting Messages

Why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

why can't I print from my 4s to my HP envy. I used to work and it still works from my air book?

Morning thomas b olsen
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
http://support.apple.com/kb/ht4356
How to print in iOS
You can print from the Apple applications, such as Mail, Safari, Photos, Camera, Maps, Pages, Numbers, Keynote, Filemaker Go, and so on. Apps available from the App Store may also offer this feature.
To print, follow these steps:
Tap the action icon .
Tap the Print button.
Select the appropriate settings, and then tap Print.
Important: If you are printing for the first time, or if the previously selected printer is not available, you will need to select a printer before step 3.
Note: AirPrint displays only the essential printer options that apply to the document or image being printed. Details such as media type, page size, and orientation are automatically determined at print time.
Hope this helps,
Mario

Why is Dreamweaver STILL working so slowly?

Similar Messages

Maybe you are looking for