Why is every broadcast old and new of The Simpsons considered New in the Guide?

The Simpsons are on about 3 times a day almost every day. Every occurance, reruns and new episodes, are listed as new or "First-Run" in the guide.
Therefore when you set to record The Simpsons 'First-Run Only" it records every episode including repeats. This is annoying for many reasons, but here are just a few:
1) It causes lots of conflicts due to the tremendous amount of reruns and variety of times the Simpsons have daily
2) Fills up my dvr, but if i limit the number of episodes .... see reason 3
3) The one new episode of the week can get auto deleted due to episode limits if you have it set to the default episode within in 2 days.
Someone is dropping the ball in the guide dept. Seems like an easy fix.

This might be a good suggestion for the Verizon Idea Exchange.
But while waiting for a fix, set it up to "record series with options." In addition to First Run, specify the selected channel, and the selected time. That will eliminate the duplications.

Similar Messages

Please help me to merge two places.sqlite to get my old and New history at the same time, every time i rename my two places.sqlite to see my old and new history

every time i rename my new places.sqlite to see my old history and come back rename old places.sqlite to see my new history, i tired and i found No Way to merge two places.sqlite :( but it's must be found this way for The PPL to see their old and new history :(
Thank You all in Advance

You can't merge history otherwise then using Sync to store the history and bookmarks of one places.sqlite on the Sync server and then disconnect.<br />
Copy the second places.sqlite file to your Firefox profile folder with Firefox closed.
Then setup Sync once again using that account and merge the content on the Sync server with your computer.
* Merge this device's data with my Sync data

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

My computer is extremely slow, with the rainbow wheel appearing with every click. It is one year old, and has all the most recent updates. Why is it so painfully slow?

That sounds horrible. There are a number of reasons it could occur.
The first thing to do is ensure you have adequate backups, because what you describe can be a symptom of impending disk failure.
To help determine the possible causes of this behaviour read the following. None of what follows is intended to fix anything, but it will provide the additional information required to advance troubleshooting. There are four separate parts to it; read everything first.
Boot OS X Recovery by holding ⌘ and r (two fingers) while you start your Mac. At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
When it finishes restart your Mac and test again for operation. If it's still not behaving as you expect it should, please post the results of EtreCheck in accordance with the following instructions:
Apple Support Communities contributor etresoft wrote a very useful app to quickly gather certain system information that may help point to a cause of this problem. Read about it here. It contains a link to download EtreCheck. Don't download it from anywhere else (such as may be found by following the results of an Internet search).
Click Open - etresoft contributes to this forum frequently and can be considered a trustworthy developer.
It will take a moment to run as it collects its data.
Copy and paste its output in a reply.
Do not be concerned about anything that says "Problem" or “failed” or anything else that may appear in red.
EtreCheck was designed to remove any personal information (such as your computer's name and serial numbers) but if you see anything that looks like an email address or any other personal information that should not be divulged to others, please delete or obscure that information when you post the reply.
When you are finished with EtreCheck, quit the program. It occupies very little space, and you can keep it or drag it to the Trash as you wish.
After completing the above please determine if the problems also occur in "Safe Mode":
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
You must disable FileVault before you can start your Mac in Safe Mode.
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all.
Merely starting your Mac in Safe Mode is not intended to resolve the problem, it's to observe its performance without certain additional components.
To end Safe Mode restart your Mac normally. Shutdown will take longer as well.
System performance problems for reasons that cannot be isolated to any other cause justify an SMC reset. Be sure to read the procedure carefully and follow all the steps exactly as written, even if they seem inapplicable or trivial.

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

Regarding passport registration issues, I need to have a letter from you including both the old and new imei numbers. Could you please send me an email mentioning that I have changed the phones with the given imei numbers?

You're not addressing Apple here. This is a user-to-user technical support forum. If you want to contact Apple, use the Contact Us link at the bottom right of every page for information on how to do so.
Best of luck.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook have all of their old and new emails. My old emails have vanished from Apple Mail.

How can I find my email in Apple Mail from before my company switched hosting providers? People with Outlook in my company have all of their old and new emails. My old emails have vanished from my Apple Mailbox on my macbook and other Apple devices. I do not have my mail backed up in time machine recently nor did I export my emailbox recently. Any ideas?

Try looking in your User folder.
Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I have to use it again after every update. I have also been informed that if you drag the user library to Finder it will remain visible.

Combing lines in all of my footage old and new???

I am having combing lines problem with all of my footage. It doesnt matter if it is DV,HD, or uncompressed footage. On all of my projects old and new. Could this be a quicktime thing? It has affected all of my footage. I just noticed this the last time I worked with it all was fine???
FCP 6.0.4

Never judge the quality of your footage on the computer monitor nor in the CANVAS or VIEWER. They lower the quality to allow for smooth playback.
I SHOUT in this stock answer...pardon that.
#2 Blurry Playback
Shane's Stock Answer #2: Blurry playback
ONLY JUDGE THE QUALITY OF YOUR MATERIAL ON AN EXTERNAL BROADCAST MONITOR, OR AT LEAST A TV.
The Canvas shows you what happens after the codec you are working with has been applied. The Viewer shows you the material in its native format. Once you drop the footage from the Viewer into the timeline, it inherits the attributes of the sequence. If it is a DV sequence, the footage will render out as DV.
1. Disable overlays on the Canvas.
2. Make sure you've rendered everything (no green bars at the top of the timeline).
Video playback requires large amounts of data and many computations. In order to maintain frame rate and be viewable at a normal size, only about one-fourth of the DV data is used in displaying the movie to the screen. However, the DV footage is still at full quality, and is best viewed thru a TV or broadcast monitor routed thru your camera or deck.
Shane

Difference old and new transfer

I will find out the fifference between old and new transfer process.
On one hand I know the old works with update rules an inforsource and transfer rules. the new one has an transformation and a dtp.
also I know that there are update rules for direct writing and update rules for flexible writing.
direct is for hierarchies also and flexible is to change data before the target.
So my question:
I wrote that I need Update Rules when I want to write from master data while loading data into a charakter. I wonder is the name flexible update rule here used in the same way as transformation rule? or do i really have to use the old transfer 3.x?
At least the question: What is the real difference between direct or flexible update rules and a transformation?
Why can'T I load a history with a transformation and with flexible update rules? Why do I have to use direct update rules?
I would be very happy if you tell me that update rules and declaring rules in transformation means the same... but i think it is not like that..

In BI 7.0 we have DTP to load data. In transformation we have start routine, end routine and transfer routine.
You can go through these links:
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=32737032
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417800)ID0190221850DB00612828832805035416End?blog=/pub/wlg/6772

T.code FF7A: how to see old and NEW open items?

Hi All,
I've filled the "Cash Managemeng Group" in the master data of a Customer.
The report Cash Manag.& Forecast doesn't update its old open line Items.
Only the documents successive to the insertion of the "Cash Managemeng Group" in the master data are updated in the report.
Could anyone tell how to obtain all the items (old and new) in the report?
Thanks
Gandalf

There are a couple options depending on the additional details of your situation....
Within t-code FDFD, there is a button labeled Data Setup. This button is intended for use when cash management (CM) is activated for an existing company code and CM needs to be updated with transactions created prior to the activation. It deletes all data in cash management for the Co.Cd. and then builds the CM data for all GL, customer and vendor accounts. There are also options to update CM for other areas (Sales, Procurement, Treasury, etc.)
Also within t-code FDFD, there is a button labeled Correct Data. This button can be used instead of the Data Setup button, if the CM data for a particular area needs to be corrected. This function has the following options: All GL accounts, All GL accounts with open items, All GL accounts w/o open items (non-open item managed accounts), All Customers/Vendors, All Customers, All Vendors.
It's best to run these functions when transactions are not being created on the system.
Regards,
Shannon

I accidently created a new apple account on my new phone, How do I merge my old and new accounts

I had an old account but had lost access to the email. In frustration I created a new account to use with iTunes on windows. Now history repeats itself and I've a new iPhone 4 that I want to load with data from both old and new accounts. Do I need to just go to the Genius bar next time I'm in town or is there some way to log into each account, back up the data and merge to the new account?

Actually not trying to merge the accounts, but back up the DATA i have stored in those accounts. Once I've pulled the many songs I purchased under the old account I'll burn them to something and delete the old account... and I think I've just answered my own question.
i.e. Don't try to merge anything, just salvage music and other data (contacts, notes)

How to fetch old and new value from of a field(non-key) from LOGDATA

Hello SDNers,
i m fecthing LOgdata from dbtlog table[in our case the log is not getting Updated in CDHDR and CDPOS table]
i m using the same logic as it is used in RSVTPROT
but the problem is
" IT is fetching OLD and NEW VALUE after Update from same field LOGDATA of dbtlog table BUT when i used same logic it is FEtching only OLD VALUEs,
CAN U GUYS PLS TELL ME HOW TO FECTH OLD VALUE and NEW VALUE of a PArticular field(non-key field, fecthing key field is not an issue) From LOGDATA field of DBTLOG.
thx a lot in advance
Regards
Kuldeep

Hi,
May be this link is useful to you.
a®

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

HT5548 I upgraded one of my programs and now the old and new both appear on launch pad, and I can't delete the old one. Is there a way I can do that?

I upgraded one of my programs and now the icons for both old and new appear on the launch pad. I don't need or want the old version to display, as it's been imported into the new one. I can't seem to figure out how to edit it off the launch pad.

Hi there,
More then likely, the old version was installed independently from the App Store. The article below goes over the process for removing these application.
OS X Lion: Install, update, and uninstall apps
http://support.apple.com/kb/ph4524
To uninstall other apps, drag the app to the Trash (the Trash is located at the end of the Dock), and then choose Finder > Empty Trash.If you change your mind, before emptying the Trash, select the app in the Trash, and then choose File > Put Back.Warning: When you empty the Trash, the app is permanently removed from your computer. If you have any files that you created with the app, you may not be able to open them.
Hope that helps,
Griff W.

My airmac no longer finds cameras. Will find iphone, but no longer photos either. My Canon Power Shots, old and new, are as good as rocks.

Recently my MacBook Air does not list devices that are cameras. It used to, but does not now. I have recently a) used MacKeeper, b) deleted movies, photos (thousands of those spawning ones) for space, c) installed ios 7 on my iphone, d) bought a Canon Power Shot SX 170is.
Image Capture, Image Browser EX, iphoto--nothing gets photos...nothing sees photos residing on my Canon PowerShots (old and new) or my iphone. Macbook Air can not find cameras.
Help. All cameras are rocks now.

MacKeeper is considered Malwear and has destroyed many iPhoto libraries - read the user tip on it - https://discussions.apple.com/community/ilife/iphoto?view=documents - my best guess is that your problem was caused by MacKeeper - I suggest you remove it according to the instructions in that user tip
to test depress the option key and launch iphoto - create a new library and see if it works correctly with your cameras - post back with the results
LN

My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>

No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061

How to get the old and new statuses of CAD indicator (DRAW-CADKZ) while changing the status of document (DRAW-DOKST)?

I want to delete the originals of document while changing the status of document based on CAD indicator status. For this I have implemented BADI DOCUMENT_STATUS01 and the method AFTER_CHANGE_STATUS. From this, the BADI is triggering whenever I am changing the document status and I can able to delete the originals. But here my requirement is to check the CAD indicator status to delete those originals. I.e. whenever the document status will change first time the CAD indicator status will also change. Based on that old and new status of CAD indicator I have to do delete operation.
If anybody has an idea about SAP documents please help me
Thank you,
Regards,
Ramesh

First the document is exists in SAP in FR status. But when the CAD system will connect to SAP then the status is changing from ‘FR’ to ‘IN’ after that the CAD Indicator is populating from Blank to ‘X’.
I want to know in which place the CAD indicator value is changing (any user exits available or any BADI s available when changing the CAD indicator) when connected to CAD system.

Why is every broadcast old and new of The Simpsons considered New in the Guide?

Similar Messages

Maybe you are looking for