Why is FF sucking up so much CPU time & Why can I not preform a search on FAQ's?

Why is FF sucking up so much CPU time &
Why can I not preform a search on FAQ's?
FF is sucking up way too much CPU time from 30 to 98% for great/long periods of time on a Sony Vaio laptop platform running P4 CPU w/XP prof w/SP3 & 2Gb RAM.
Why can I not preform a search on FAQ's so that might not have repeat a question that might have been asked previously?
Searching 24xx pages is not my idea of how to spend precious time to find an answer that I am looking for.

Safe mode or turning off the plugins does not work with this bug. If they are still installed firefox will open plugincontainer, the plugins need to be uninstalled or disabled at OS level.
"''clearing Cookies will start an instance of plugin-container for almost all of the plugins installed on the system, regardless of enable/disable state for each one.''"

Similar Messages

Apple mobile device service uses too much cpu time

Apple mobile device service uses too much cpu time, from 88% to 99% of the CPU time.

The best way to fix this is to completely remove all aspects of iTunes then reinstall. Step by step directions are on this article. Good luck
http://support.apple.com/kb/HT1925?viewlocale=en_US

How to estimate how much CPU time is parse related DB 9i wide .

Hi,
I'm trying to estimate how much CPU time is parse related and next compare that value after i.e. cursor_cache setting. So far I've found :
parse time cpu
parse time elapsed
in v$sysstat .
Are there good indicators for my needs ?
Basically when I get CPU time from statspack and parsetime_cpu (somehow) i can derive percentage usage.
btw how is 'CPU time' in statspack calculated ?
I'm running AIX DB 9.2.0.8 EE , can take historical data from statspack .
Regards.
Greg

Hi,
I'm trying to estimate how much CPU time is parse related and next compare that value after i.e. cursor_cache setting. So far I've found :
parse time cpu
parse time elapsed
in v$sysstat .
Are there good indicators for my needs ?
Basically when I get CPU time from statspack and parsetime_cpu (somehow) i can derive percentage usage.
btw how is 'CPU time' in statspack calculated ?
I'm running AIX DB 9.2.0.8 EE , can take historical data from statspack .
Regards.
Greg

Ns-slapd process taking too much cpu time

Dear All,
I am currently using directory server 6.2 and it comes out that the ns-slapd process is taking almost 95% of cpu time. This goes for 2 to 3 hours then it comes back to normal. This is happening every alternate day. I have monitored the log but could not find any suspected activity which may be causing this.
Is this something vulnerable in 6.2?
Any tunings that i should undergo?
Regards,
Scotty

Dear Ludovic,
i am finding alot of the below unindexed searches:
[30/Oct/2007:16:30:27 +0400] - WARNING<20805> - Backend Database - conn=-1 op=0 msgId=-1 - search is not indexed base='cn=changelog' filter='(&(nsroledn=un=xxcccvvvcb823f7,ou=gdf016926,ou=people,ou=2005,ou=r444,ou=mail,o=kas.ac,o=pblebs,o=pab)(|(objectclass=*)(objectclass=ldapsubentry)))' scope='sub'
and prstat is showing
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/LWPID
13433 root 4357M 2727M run 32 0 1:44:10 3.6% ns-slapd/101
13433 root 4357M 2727M run 32 0 2:40:40 3.6% ns-slapd/84
13433 root 4357M 2727M run 33 0 0:55:00 3.5% ns-slapd/97
13433 root 4357M 2727M run 33 0 1:35:56 3.4% ns-slapd/57
13433 root 4357M 2727M run 33 0 0:24:45 3.4% ns-slapd/94
13433 root 4357M 2727M run 43 0 2:06:04 3.1% ns-slapd/86
and even more
Would it be of the unindexed searches?
Thanks,
Scorry

CORBA - tnameserv uses too much CPU time

The tnameserv we are using from JDK 1.3 uses a lot of CPU time.
Anyone has advice on it?>
Thanks in advance.

I think if you want commercial performance you need to purchase a commercial product like Visibroker.

What is "other" listed on my iPhone 4S and why is it sucking up so much storage space? How can I get rid of it?

How can I get rid of the huge "other" listed on my storage of my iPhone? It's taking up huge gigs. This phone is not even 60 days old!

This worked for me with iPhone 5:
Backup iPhone in iTunes
in iPhone>Settings>General>Reset>Erase all content and Settings
in iTunes> Restore iPhone with previous Backup (point 1)
There is no need to reset the iPhone with iTunes and no need to manually resync apps and content.
You will have your "new" iPhone with all your apps, settings and media just like before
with only a mere 500 mb (0,5gb) of "other" memory.

Why does Calendar take up so much space and why can't I add events or sync?

Since I updated to ios7, my calendar hasn't worked at all. It used to sync with my Google calendar. Now I can't see any events in my calendar. The + sign to add an event is always greyed out so I can't add events. And something I've just noticed is that Calendar takes up 473 MB of space on my phone, making it one of the biggest users of space. (This might be related. If I search for an event in my calendar, it shows a long long long list of events that all say "New Event" that are scheduled to last all day. I can't delete these. It says they are assigned to "Untitled Calendar."
I've tried all sorts of combinations of turning on and off syncing calendars with Google and with iCloud. I can't detect any change. (My Mavericks calendar works just fine and syncs with Google.)

Hello chinchillababiz,
After reviewing your post, I have located an article that can help with iOS storage. It contains helpful advice and information that may assist you in managing your data:
See how much storage you've used on your iPhone, iPad, and iPod touch
If your device is near its capacity or you get an alert that your storage is full, you can remove some of your less used content to make room for more.
View storage usage on your iOS device
Tap Settings > General > Usage > Manage Storage to see the amount of space each app and its content takes on your device.
Tap an app for more detailed information about its usage.
Depending on the app, you might be able to delete some of the app's content, or delete the app and all of its content.
View storage usage for your iOS device in iTunes
When you connect your device and select it in iTunes, you'll see your usage by content type:
Audio: Songs, audio podcasts, audiobooks, voice memos, and ringtones
Video: Movies, music videos, and TV shows
Photos: Camera Roll contents, Photo Stream, and Photo Library
Apps: Installed apps
Books: iBooks books and PDF files
Documents & Data: App content such as contacts, calendars, messages, emails, and their attachments, Safari Offline Reading List, and files that you've created in your apps
Other: Settings, Siri voices, and other system data
Hover your mouse over the content type for more information about usage.
iTunes displays how much space the selected songs, videos, audiobooks, and apps use in the status bar on the bottom of the screen. You can also see this information by selecting an item and then choosing File > Get Info. The size is available in the Summary tab.
You can transfer or sync content to your computer from your device. If you want to remove certain types of content from your device, learn how to manually manage content using iTunes.
Learn more
Learn more about storage capacity on OS X and iOS.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

100% cpu time on application but not vi

I am trying to build an application but I am running into a problem i have not seen before. I have a vi that uses 3 while loops simultaneously. It works fine when i run it on my developing machine as a vi, but as soon as i make it an application my cpu usage goes to 100%. It still functions, but obviously the pc is doing to much work. Any ideas on why this is happening? Labview 7.0

If possible, place your VIs here, and our enthusiasts here will be able to help you
Cheers!
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com

Why when I connect my macbook air to time machine can't I use wifi any longer?

Whenever I want to send files from my computer to the time machine, I can't use any internet features...
If I look to which network my computer is logged on to, it says, Lara's Time Machine, which is not my wifi internet network.
Thanks in advance!
Lara

It sounds like you have two different Wi-Fi networks, one created by a Time Capsule and the other by your router, and the Time Capsule is not connected to the Internet. You should either use the TC as your router, or else connect it to the router with an Ethernet cable (if possible) and set it up to extend a wireless network in AirPort Utility. Details are in the built-in help of that application.

New x301 - Taskmgr.exe uses "constant" amount of CPU. My t60 does not why?

When I click on "Start Task Manager" I notice that even with ALL programs closed, the only process to use CPU between 2% and 10% is the Task manager (taskmgr.exe).
I also have a t60 (xp pro sp3) and noticed that task manager users 0% CPU. I know its not absolute zero but not enough to count as 1% and does not kept using up CPU.
This is my first 64 bit system. It's 1.4 dual core with 4gb ram and 128gb solid state drive.
Why is taskmgr.exe using up so much CPU %? How can this be fixed?
Anyone else with an x301 or 64bit lenovo with this similar behavior?
Thanks

anyone?

How to find lock and more information why the conc prg taking to much time

Oracle Apps R12- Orader Management
Hi All
I am new to Oracle Apps,We i run my concurrent Program
its take too much time to complete.How to find that there is any lock occur in table while the concurrent program is running, any other way to find why the concurrent program takes too much of time to execute and how can we speed up the process.
Yesterday day we makes some change to speed up the process with our DBA to speed up the concurrent program
The first concurrent program takes 2.30 hours and after these changes its take 1.45 hours.Please suggest it is correct
Logged with System Administrator Responsibility.
Manager – Define – Standard Manager.
Set the PROCESSES value as 15 (changed from 10).
Set the SLEEP SECONDS value as 10 (Changed from 30).
Manager – Define – Standard Manager2.
Set the PROCESSES value as 15 (changed from 10).
Set the SLEEP SECONDS value as 10 (Changed from 60).
Any suggestion on how find why it takes too much of time.
Any help is highly appricatable
Thanks & Regards
Srikkanth.M

Hi;
Please check below notes:
FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]
FAQ - How to Use Debug Tools and Scripts for the APS Suite [ID 245974.1]
Turning Debug Mode On [ID 148140.1]
How to Obtain Debug Log in R12 [ID 787727.1]
How to enable and retrieve debug log messages [ID 433199.1]
Running a Trace on a Form [ID 148143.1]
Running a Trace on a Process [ID 148145.1]
Regard
Helios

MacPro is overheating, installing Lion. BN indexer process seems to be cosuming around 100% CPU. What can I do?

MacPro overheating after installing Lion. BN indexer and-or helpd processes seem to be taking around 100% CPU. Suspending those processes seem to solve the problem, but does not seem to be an adequate solution.

Helpd updates all of the Application help files on your Mac.
However, I hate having helpd launching repeatedly and seemingly randomly, taking up 1 gig of RAM, and using so much CPU time that the fans go loudly full blast on my MacBook Pro. I prefer having my MacBook Pro be quiet.
Upon investigation, I found that helpd is controlled by a System LaunchAgent plist which is run on startup:
/System/LaunchAgents/com.apple.helpd.plist
When examining the contents of this plist using XCode, what you find is that:
1. helpd is run when it is loaded by the system at startup or login
2. helpd is run on every Sunday at 2:30 AM
3. the launch agent watches the following folders and runs helpd whenever the folders change:
    /Applications/
    /Applications/Utilities/
The biggest problem is the watch folders. They change whenever you open them (i.e. their modified date changes when opened). They change when you install a new application. Many applications change their Application folder content when run. etc. etc.
The easiest solution is to use Xcode, Lingon2 in expert mode (not Lingon3) or another plist editor to modify the com.apple.helpd.plist to change the watch folders.
I changed /Applications/ to /Applications/Utilities/ and left the second watch folder /Applications/Utilities/
Since I seldom open /Applications/Utilities/ this causes helpd to launch far less often.
You can also just simpliy eliminate the watch folders. This keeps helpd running on Sundays at 2:30 AM or on startup or login.
When users get rid of many older applications, they see helpd launch less often since these older applications may be the ones modifying the /Applications/ folder.
If you have only newer applications or few applications, you don't run into the helpd problem as often or at all. This is why few people complain about helpd. Only the users who have numerous applications (particularly older ones or ones not bought from the App Store) run into this problem.
Here are the contents of the com.apple.helpd.plist:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
          <key>EnableTransactions</key>
          <true/>
          <key>EnvironmentVariables</key>
          <dict>
                    <key>NSRunningFromLaunchd</key>
                    <string>1</string>
          </dict>
          <key>Label</key>
          <string>com.apple.helpd</string>
          <key>LimitLoadToSessionType</key>
          <array>
                    <string>Aqua</string>
                    <string>LoginWindow</string>
          </array>
          <key>MachServices</key>
          <dict>
                    <key>com.apple.helpd</key>
                    <true/>
          </dict>
          <key>OnDemand</key>
          <true/>
          <key>Program</key>
          <string>/System/Library/PrivateFrameworks/HelpData.framework/Versions/A/Resourc es/helpd</string>
          <key>RunAtLoad</key>
          <true/>
          <key>StartCalendarInterval</key>
          <dict>
                    <key>Hour</key>
                    <integer>2</integer>
                    <key>Minute</key>
                    <integer>30</integer>
                    <key>Weekday</key>
                    <integer>7</integer>
          </dict>
          <key>WatchPaths</key>
          <array>
                    <string>/Applications/</string>
                    <string>/Applications/Utilities/</string>
          </array>
</dict>
</plist>

CPU time of BPM or message mapping?

Hi all,
is there a way to find out how much CPU time is spent by a certain BPM instance (or message mapping instance)?
It would be sufficient to get that value per BPM type / message mapping type.
So far, I've found the following sources, which all won't work, unfortunately:
- table SWWWIHEAD: No CPU time information (as far as I see)
- transaction STAD: I don't see a way to connect an entry to the resp. BPM. There is a Transaction-ID, but I can't find it in the BPM...
- transaction ST03N: Only aggregated values for user WF_BATCH, not detailed statistics
- several places, which only show clock time, but not CPU time
Thanks in advance!
Kind regards,
Dennis

Hi Michal,
Thanks a lot for your info.
Too bad that there is no other possibility yet.
I'm not completely sure whether the result is worth the effort, though, as there will probably be a lot of different BPM types on this system, so benchmarking each is quite some work (and requires an otherwise idle test system during this time).
In addition, it could be difficult to generate test data that will most likely represent the expected data during production use. Especially for BPMs with many conditional tasks (branches, loops, ...), this can be a mess...
But I will propose it anyway. If it gets accepted, I'll post the gained experience with this approach here. Maybe it works better than my pessimistic expection.
Hopefully, SAP will integrate this functionality somewhen. I guess I set up some customer feedback.
Kind regards,
Dennis

HT4623 Why after updating secret passages & four pics one word can I not gain access to play them

Why after updating secret passages &four pics one word can I not play the games they just keep switching themselves off makes u scared to update anything else

I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

Why does coreaudiod consume so much cpu?

I looked into activity monitor and found coreaudiod consuming 30-40% cpu cycles on my iBook. I have no songs, videos or alert sounds playing.
Can any one tell me what is happening? Why is coreaudiod bugging my cpu? How can i prevent it?
iMac G4 FP 17, iBook G4 14, iPod G3 Mac OS X (10.4.3) PC on XP, 2k & Linux

Edit: i tried to quit it then the trash empty sound came out
[i empty my trash like 30mins ago] - a coreaudiod hang?

Why is FF sucking up so much CPU time & Why can I not preform a search on FAQ's?

Similar Messages

Maybe you are looking for