Why is Formatting Being Stripped?
About a month ago I discovered an issue in Safari 7.1 that I have not been able to resolve. Whenever I visit www.Wordpress.org, Safari strips all the formatting code and leaves the raw html. (See attached photo).
It renders fine when I open in Firefox or Google. It is only on Safari, and only with this website (Wordpress.org).
Has anyone else encountered this issue, or have any suggestions?
Thanks.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.
Similar Messages
-
Why are 2 different date formats being used in thunderbird?
Hello
in the attachment you will see that the listing of emails (on the left) is shown using UK date format DD/MM/YY (that's what I want), however, the message content panel shows the date in the US format MM/DD/YY (I definitely do not want this).
Why are 2 different formats being applied in Thunderbird, and how can I get both to be UK DD/MM/YY please.
Many thanks
Lord ElpusI should have said :
this is Thunderbird 31.6.0 on Ubuntu 14.04 LTS
Image resent due to previous failure. -
So I upgraded to Excel 2008 only to discover that it is stripping all the hyperlinks out of any of my work spreadsheets that I open.
So, I went over to Numbers and opened the same spreadsheet. The first two columns of this spreadsheet are lists of numbers, all hyperlinked to a web page. Well, in Numbers the first cell's hyperlink is still there, but all the rest have been stripped!
There's nothing complicated about this spreadsheet, its simply 7 columns of info, the first two columns being numbers that have hyperlinks to web pages. Thats it, wasn't created with any macro's or anything. My IS guy created them in perl using Spreadsheet::WriteExcel, using the write_url() function, and everything looks fine in his copy of excel 2k8 or my copy of Excel 2004.
I really don't want to have to keep using Excel 2004 if I don't have to. Since MS was stupid enough to break their own software and these spreadsheets seem to TRY to open correctly in Numbers, does anyone have any idea why the hyperlinks are being stripped out so I can at least use this?Hello
In a not so old thread (02/13) I passed a list of Numbers error messages related to exchanges with XL.
http://discussions.apple.com/thread.jspa?messageID=6587857
You may copy them in a doc for future ref
Some of these messages are related to hyperlinks.
Here they are.
+Couldn’t export hyperlinks outside table cells+
+Hyperlinks in cells that don’t contain text weren’t imported.+
+Hyperlinks on shapes aren’t supported and were removed.+
+Hyperlinks within workbooks and hyperlinks to other files aren’t supported and were removed.+
Maybe they explain what you get.
Yvan KOENIG (from FRANCE mercredi 19 mars 2008 18:14:31) -
Why am I being asked for my credit card details to upgrade a Free app??
Why am I being asked for my credit card details to upgrade a Free app??
Howdy GaryFC,
Thanks for using the Apple Support Communities.
If you have a payment source associated with your Apple ID, it needs to be a vaild form of payment. To troubleshoot issues with your payment type being declined, please follow the steps below.
In most cases, this issue is caused by a formatting error in the billing address that you have provided. You can correct the issue by verifying that the information you have provided is correct, or by changing the format of your address to match the format that your credit card company has on file.
You can verify and/or modify your billing address by following these instructions:
Open iTunes. If you are signed in to iTunes, skip to step 4.
Note: Verify that you are signed in to the correct iTunes account. If you are unsure which account you're signed into, choose Store > Sign Out and proceed to step 2.
Choose Store > Sign In.
Enter your account name and password, then click the Sign In button.
Choose Store > View My Account.
Click the Edit Payment Information button.
In the Payment Method section, choose None.
Click the Done button at the bottom of the page.
Click the Edit Payment Information button again.
Enter your billing address exactly as it appears on your credit card statement.
Select your credit card type in the Payment Method section.
Enter your credit card information, your card's security code, and the expiration date.
Click the Done button at the bottom of the page.
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorizations have the correct information on file.
iTunes Store: My credit card's security code or zip code does not match my bank's records - Apple Support
Take care,
Alex H. -
Why am i being charged dollars when i did not buy anything!
why am i being charged ($1.05 on several occations ) when i did not buy anything, just downloaded free apps and sometimes i have updated few of those free apps.
all i see is charges our of no where! it doesn't happen every time i do a free download (games. etc,,).. and am sure what i download is from 'top free
i have a susption that it happens when i update some of my free apps, because some times the charges are more than $1.05,, but rather 3,4,5,6,7!!!
please explain, i can't figure out whats happening !why am i being charged ($1.05 on several occations ) when i did not buy anything, just downloaded free apps and sometimes i have updated few of those free apps.
Apple "veriifes" your Apple ID account information everytime you download media whether free or paid thus the authorization hold. Your account will be credited the amount of the holds usually within 24 to 48 hours.
Read here > iTunes Store & Mac App Store: About credit-card authorization holds -
Why am I being charged for data when connected to wifi AND not using my phone?!
WHY am I being charged for data that I'm not using? At times when I'm asleep AND my phone is connected to wifi?! This happens at really specific, alternating times like 9:54 pm every day, or 12:01 am, 6:01 am and then 12:01pm and 6:01pm. When I called I was told "maybe your wifi at home is disconnecting" or "maybe your phone is connecting to atnt or sprint". It's not possible that my phone is disconnecting from wifi every six hours on the dot and, at that exact time, I'm always using data. I find it hard to believe that I live in a HUGE city and my phone magically connects to other networks and I NEVER notice this. Verizon is full of LIARS (and maybe’s) and I'm not convinced that these data charges are a coincidence. I was told to turn off my cellular data to see if the problem resolves itself. Why should I alter my daily life when Verizon is clearly the one with the issue? I hope there's a class action lawsuit because Verizon is trying to get over on everyone! I need answers!
Hello NotHappy101,
I think it's quite odd that your data usage is at very specific times. We can certainly take a closer look. Please reply to my Direct Message, so we can get some additional details.
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
Why am I being told my email address has changed and need to change it for my apple id to work?
Not just iTunes store, but every day or so, when I'm trying to check for updated apps in iTunes, or download something on iPhone or update OS X software via App Store, I'm told that my email address has changed and I need to update it before I can download tunes from iTunes.
I then get redirected to a page where my apple id is shown (my email address), the address field is blank and a couple of password fields with ****** in them.
I put my email address (apple id) back in and all is well.
Why is it being reset all the time?
I don't have another apple id with the same address, but I do have a lot of devices using my one apple id:
A Mac (Lion latest)
iPhone 4S (iOS5 latest)
iPad 1 (iOS5 latest)
iTunes on XP (latest iTunes)
iPhone 3G (iPhone OS 3 - yea, really ancient)
Apple TV 1 (latest)
Wondering if one of these could be causing a reset.this can happen when the billing address in your appleid info is not EXACTLY the same as your bank details, depending of the bank (see if you right "st" instead "street" maybe)
check out this article:
support.apple.com/kb/TS1646 -
Why am i being charged twice for 11.04 and 11.46 when I did not purchase those songs, I used an itunes card 25$ and I still have 0.04 cents left?
I couldnt redeem w/o an apple ID so when i did it asked for a credit card. And I want to discontinue and remove my account from itunes but it wont let me, there is no account discontinue or removal of accountBecause too much time has passed I can't edit this into the prior comment, but here is the info regarding reverting to iTunes 11.0.2 (assuming you do have a time machine backup) from https://discussions.apple.com/message/22057703#22057703
W. Raider wrote:
Repairing permissions doesn't fix it.
I reverted to the previous version, 11.0.2.
1. Quit the new crash-prone iTunes.
2. Delete the app.
3. Restore v. 11.0.2 with Time Machine.
4. In your iTunes folder look for a folder called "Previous iTunes Libraries", find the latest one.
5. In the iTunes folder itself you'll see "iTunes Library.itl", delete it (or compress it and save a copy for later just in case.
6. Copy the newest .itl file in Previous iTunes Libraries to the iTunes folder and rename it "iTunes Library.itl".
7. Launch the older version of iTunes.
My crashing has seemed to have ceased with a revert to an older version. I noticed today that the newer crashing iTunes had been launched for hours but not playing anything, when I played internet radio it crashed within 5mins, fed up I reverted to an older version.
Btw, a simpler way to do this is to revert to older iTunes app, then hold Option when it launches and choose an older library. -
Hi, If I do not have to pay for free installation, why am I being asked for billing details?
AaroniCloud backs up your iOS device (not your Mac) automatically. You can remove the backup:
http://help.apple.com/icloud/#/mm122d3ef202
and it will not back up again. This will not affect a backup made using iTunes. The notice you see refers to calendars, contacts, iWork documents and so on, which live on the server and are read from there by your Mac, and so will obviously disappear if you turn iCloud off altogether (which you don't need to do) or turn off Documents (which you don't need to do either). -
Why Reports format behaves different in Excel and browser(if desformat=html or pdf)?
1-Why Reports format behaves different in Excel and browser(if desformat=html or pdf)?
2-I made three queries Q1,Q2 & Q3 and linked them with proper field links but suppose Q3 returns no records for some Q1&Q2 records & when the report runs for delimited options it reflects only those records as output for which all the queries return records(if Q3 returns no record then the related records from queries Q1,Q2 don't reflect) while the output in desformat=html or pdf is ok..
can you please resolve my problems
( I have installed patch 5a in my report server machine)
Thanks & Regds.
Suneel
nullWhat do you mean by "different"? (In our
experience, Oracle html output has too many
columns, which are not visible in the
browser but are obvious in Excel.)
We build our own html programmatically, so
that Excel matches the browser more closely.
-- Allan Plumb -
I have an application that allows folks to enter version numbers and they should be able to enter 1.10 but that 0 is getting stripped. This is a custom tabular application and I am using collections. The database column is a VARCHAR2. How do I prevent those trailing 0's from being stripped? Below is the code to create the collection, the populate it.
declare
la_cks wwv_flow_global.vc_arr2;
begin
if htmldb_application.g_fcs.count > 0 then
la_cks := htmldb_application.g_fcs;
else
la_cks := htmldb_application.g_f07;
end if;
htmldb_collection.create_or_truncate_collection('UPDATE_DTL');
htmldb_collection.create_or_truncate_collection('INSERT_DTL');
for i in 1..htmldb_application.g_f01.count
loop
if htmldb_application.g_f01(i) is not null then
htmldb_collection.add_member(
p_collection_name => 'UPDATE_DTL'
,p_c001 => htmldb_application.g_f01(i)
,p_c002 => htmldb_application.g_f02(i)
,p_c003 => htmldb_application.g_f03(i)
,p_c004 => htmldb_application.g_f04(i)
,p_c005 => htmldb_application.g_f05(i)
,p_c006 => htmldb_application.g_f06(i)
,p_c007 => la_cks(i));
else
htmldb_collection.add_member(
p_collection_name => 'INSERT_DTL'
,p_c001 => htmldb_application.g_f01(i)
,p_c002 => htmldb_application.g_f02(i)
,p_c003 => htmldb_application.g_f03(i)
,p_c004 => htmldb_application.g_f04(i)
,p_c005 => htmldb_application.g_f05(i)
,p_c006 => htmldb_application.g_f06(i)
,p_c007 => la_cks(i));
end if;
end loop;
end;_______________________________________________________________________________________________
DECLARE
l_cks wwv_flow_global.vc_arr2;
j PLS_INTEGER := 1;
vrow BINARY_INTEGER;
BEGIN
-- Get original MD5 checksum
SELECT wwv_flow_item.md5 (sak_co_impl_plan_dtl
, sak_co_impl_plan_hdr
, cde_co_impl_type
, nam_path
, nam_file
, num_version
) cks
BULK COLLECT INTO l_cks
FROM t_co_impl_plan_dtl
WHERE sak_co_impl_plan_hdr = :p30_sak_co_impl_plan_hdr;
IF HTMLDB_APPLICATION.g_fcs.COUNT > 0
THEN
-- Compare the original checksun, l_cks,
-- with submitted checksun, htmldb_application.g_fcs
-- If they are different, raise an error
FOR i IN 1 .. l_cks.COUNT
LOOP
IF HTMLDB_APPLICATION.g_fcs (i) != l_cks (i)
THEN
ROLLBACK;
raise_application_error
(-20001
, 'Current version of data in database hs changed '
|| 'since user initiated update process.'
RETURN;
END IF;
END LOOP;
ELSE
-- Compare the original checksun, l_cks,
-- with submitted checksun, htmldb_application.g_fcs
-- If they are different, raise an error
FOR i IN 1 .. l_cks.COUNT
LOOP
IF HTMLDB_APPLICATION.g_f07 (i) != l_cks (i)
THEN
ROLLBACK;
raise_application_error
(-20001
, 'Current version of data in database hs changed '
|| 'since user initiated update process.'
RETURN;
END IF;
END LOOP;
END IF;
-- update t_co_impl_plan_dtl
FOR i IN 1 .. HTMLDB_APPLICATION.g_f01.COUNT
LOOP
IF HTMLDB_APPLICATION.g_f01 (i) IS NOT NULL
THEN
UPDATE t_co_impl_plan_dtl
SET cde_co_impl_type =
REPLACE (HTMLDB_APPLICATION.g_f03 (i), '%' || 'null%'
, NULL)
, nam_path = HTMLDB_APPLICATION.g_f04 (i)
, nam_file = HTMLDB_APPLICATION.g_f05 (i)
, num_version = HTMLDB_APPLICATION.g_f06 (i)
WHERE sak_co_impl_plan_dtl = HTMLDB_APPLICATION.g_f01 (i);
ELSE
IF (HTMLDB_APPLICATION.g_f02 (i) IS NOT NULL) AND (REPLACE (HTMLDB_APPLICATION.g_f03 (i), '%' || 'null%', NULL) IS NOT NULL)
THEN
INSERT INTO t_co_impl_plan_dtl
(sak_co_impl_plan_dtl
, sak_co_impl_plan_hdr
, cde_co_impl_type
, nam_path
, nam_file
, num_version
VALUES (seq_co_impl_plan_dtl.NEXTVAL
, HTMLDB_APPLICATION.g_f02 (i)
, REPLACE (HTMLDB_APPLICATION.g_f03 (i)
, '%' || 'null%'
, NULL
, HTMLDB_APPLICATION.g_f04 (i)
, HTMLDB_APPLICATION.g_f05 (i)
, HTMLDB_APPLICATION.g_f06 (i)
END IF;
END IF;
END LOOP;
FOR i IN 1 .. apex_application.g_f30.COUNT
LOOP
vrow := apex_application.g_f30 (i);
DELETE t_co_impl_plan_dtl
WHERE sak_co_impl_plan_dtl = HTMLDB_APPLICATION.g_f01 (vrow);
END LOOP;
END;Edited by: kims on Aug 24, 2010 7:52 AMPlease edit your post so that the code extract is wrapped in *\...\* tags as described in the FAQ. That will make it easier to read and hopefully stop the subscripts being converted into icons...
Note that you should always provide the information requested in the forum sticky threads:
- APEX version?
- DB version and edition?
- Web server architecture (EPG, OHS or APEX listener)?
- Browser(s) used? -
Why is Itunes being charged to my phone for integration?
why is Itunes being charged to my phone for integration?
No idea what this question means.
What are you asking? -
How can I check to see if 802.1Q VLAN tagging information is being stripped from the RTP stream by the workstation's NIC?
Some network cards strip the dot1q headers, so your packet capture won't have this data. If you're not seeing dot1q headers please check the following link from wireshark:
http://wiki.wireshark.org/CaptureSetup/VLAN#head-81781716144f2855ab0aff2f8b752e95f2562efb
Apply the previous settings to the machine you're capturing with. -
If a app is free why am I being directed to my bank details where it's saying payment method was declined
Unless you set up your itunes ID/account when it was created to not use a credit card, then you must provide one. If payment is declined it may be due to an invalid card or expired date. You'lll need to update your payment method.
To manage the Apple ID:
https://appleid.apple.com -
Why am I being asked to sign in all the time?
Why am I being asked to sign in with my Adobe ID and password, having done so I then get a screen saying you have 20 days left of the trail version. I am fully paid up and subscriptions are taken every month?
Chat Now button near the bottom for Activation and Deactivation may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Maybe you are looking for
-
Why can't I run my Java program with just the JRE, the JDK is required?
I've recently written 3 programs in Java using the Netbeans IDE with JDK 1.6 as the default Java platform. The compile-time libraries include the Swing Application Framework. I use BuildDesk from ProductiveMe to package the each program into a Window
-
Capturing characters from string
Hey guys, I need a little bit of help. Thanks in advance! I have a user text input and I'm trying to save only the numbers in that string into a variable. For example: User enters "J123JS" var userNum=123 How can I do so? Also, I'd like to check if a
-
How can I find the "process code" in a Service Notification
Hi folks, In the Transaction IW52 I am trying to enter the values for "Fault code" and "sub-header". Now I need to know how to find out which "process code" is my notification is assigned to. This entry is needed in the tab object data in the section
-
Added gmail account to my iPad but I now have 5000 emails. How do I fix this.
Added gmail account to my iPad but I now have 5000 emails. How do I fix this?
-
Can you talk and surf the internet with the Thunderbolt at the same time?
and what would be my advantages to waiting for the droid bionic ( I have never owned a smartphone)