Why is garageband lagging with audiobus and crashing everytime?

Fricken ****, this is not the first time garageband crashed. I am using the iOS 7.something, the latest, and using the new iPad. Every time after I connect to audiobus and record with iMini or launch key or any other stuff, I will have to re-run garageband and close all those apps used to record, including audiobus. After getting back in, after I change chords or start editing the MIDI, the entire app jams and crashes. When I get back in, I lost everything, all the recording were into half or just a blank purple line. For those instruments, all the MIDI disappear and left a bright green bar there. Fix this in the next update and please add cut off and resonance filters to garageband -.-

rsherid wrote:
Is there anything I can do
http://www.bulletsandbones.com/GB/GBFAQ.html#optimize
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

Why Photoshop stopped working with Lightroom and how to fix it?

Why Photoshop stopped working with Lightroom and how to fix it?

As I am editing photos in lightroom and just right click on the photo to select to edit in photoshop the opting shows up in gray out but it isn't available for selection anylonger. It was working just fine a few days ago.
Thank you for your reply!!!

N650-1GD5/OCV1 freeze with artifacts and crash

Good morning everyone
First of all, I will start to present the configuration of my computer
PSU: Sirtec High Power 500W Bronze, PFC Active
MB: MSI 970A-G43 (bought 2 weeks ago)
CPU: AMD Athlon II X2 240 (2.8 GHz) - Running stock with AMD Cooler since i bought it, around 35-43 C operating
temperature
RAM: KingMax 4GB DDR3 1333 MHz (1 x 4GB Module)
VGA: N650-1GD5/OCV1 (MSI GeForce GTX 650, running with stock cooler and stock frequency, i have never oc on it)
HDD1: WD 640GB Caviar Black Edition, SATA2 32MB Cache
HDD2: WD 500 GB Caviar Blue, SATA2, 16MB Cache
DVD Writer 1: LG GH22NS50
DVD Writer 2: Optiarc AD-7280S
Card Reader 3.5"
I'm an very very casual gamer, i play games once or twice a week; in the last period i didn't played games for one month; i've used my pc for mail, office, watching movies, messenger, facebook, web browsing, hdd data recovery, programming php. Before upgrading to 970A-G43, i had the same configuration - except MB and RAM (i used for 4 years K9A2GM V3 with 4GB (2x2GB) DDR2 800 KingMax and the actually N650-1GD5/OCV1; played games with no problems).
After the upgrade, i installed OS Windows XP SP3 with clean install, AHCI Mode, latest drivers - no problems 'till there. I have installed latest version of DirectX 9.0c and some games: Deus Ex: Human Revolution, Euro Truck Simulator 2, Sonic and All-Stars Racing Transformed. All with same problem: pc freezes with artifacts and then freeze - sometimes after 3-4 minutes of playing, othertimes after 10-15 minutes.
I've checked the RAM with MemTest86 for one night, no errors. I've checked the CPU and GPU Temperature, all stable (CPU around 40, GPU around 70 under full load). I've stressed up the system with Prime95 and Furmark latest version running at the same time - all stable (Tested for 30 minutes, CPU around 43 C, GPU around 85 C - no freeze, no crash).I installed 3D Mark 06, i ran it and it freezes in-time of first test or after it.
VGA driver was 320.49 WHQL initially, downloaded from nvidia website. I uninstalled it, cleaned my OS with Driver Sweeper, installed latest version from MSI Website (MSI Graphics Driver 306.81 ). Both drivers, same problems.
I'm pretty sure that there is no problem with PSU or MB's VRM (VRM supports 125W TDP, CPU is running 65W. My old boad K9A2GM V3 has only 65W and there were no problem). If there were problems, the system would crash in prime 95 and furmark running at the same time, i think.
I didn't tested yet my VGA on other PC, neither another VGA in my PC.
Any suggestion would be appreciated.
P.S.: In BIOS, all is set on AUTO - except DDR Speed - Manually set to 1333 MHZ with auto timings.
C1E Enabled, Cool and Quiet Activated, EUP 2013 Enabled.
I have flashed MB to latest BIOS, v10.3; same problem
Any suggestion is appreciated.
Thanks in advance,
Best regards!
Daniel Ciuperca
Constanta City, ROMANIA.

VGA Card is dead. Probably at least one memory chip died or has errors on it. Testet on another PC and results are same, in 3D Mark and Crysis 3 too.
I sent the card to warranty services.
Problem is solved.
Thanks a lot to all of you who read my post.
Best regards,
Daniel Ciuperca
Constanta, ROMANIA

[FIXED] Compiz runs only with emerald and crashes with metacity

Hey,
I currently try to use a metacity theme and have compiz enabled but apparently that's something compiz doesn't really like.
One think i noticed in fusion-icon is that the entire metacity option under: "Select Window Devorator" is just not there.. (or was that always the case?)
Oke, things i have done so far:
- Search this forum (obviously) nothing found with a solution
- Searched the wiki (same results)
- in gconf-editor /desktop/gnome/session/required_components/windowmanager set to compiz (like said in the Compiz wiki page on archlinux.org
- disabled metacity as compositing manager (tried with enabled as well but the same results)
- right now i have the compiz bash script from ubuntu (tweaked a little) and that starts up compiz just fine but not with metacity
And incase you want the script:
#!/bin/sh
# Compiz Manager wrapper script
# Copyright (c) 2007 Kristian Lyngstøl <[email protected]>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
# Contributions by: Treviño (3v1n0) <[email protected]>, Ubuntu Packages
# Much of this code is based on Beryl code, also licensed under the GPL.
# This script will detect what options we need to pass to compiz to get it
# started, and start a default plugin and possibly window decorator.
COMPIZ_BIN_PATH="/usr/bin/" # For window decorators and compiz
PLUGIN_PATH="/usr/lib/compiz/"
GLXINFO="/usr/bin/glxinfo"
KWIN="/usr/bin/kwin"
METACITY="/usr/bin/metacity"
XFWM="/usr/bin/xfwm"
COMPIZ_NAME="compiz" # Final name for compiz (compiz.real)
# For Xgl LD_PRELOAD
LIBGL_NVIDIA="/usr/lib/nvidia/libGL.so.1.2.xlibmesa"
LIBGL_FGLRX="/usr/lib/fglrx/libGL.so.1.2.xlibmesa"
# Minimum amount of memory (in kilo bytes) that nVidia cards need
# to be allowed to start
# Set to 262144 to require 256MB
NVIDIA_MEMORY="65536" # 64MB
NVIDIA_SETTINGS="nvidia-settings" # Assume it's in the path by default
# For detecting what driver is in use, the + is for one or more /'s
XORG_DRIVER_PATH="/usr/lib/xorg/modules/drivers/+"
FALLBACKWM="xterm"
if [ x"$KDE_FULL_SESSION" = x"true" ]; then
FALLBACKWM="${KWIN}";
elif [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ]; then
FALLBACKWM="${METACITY}"
elif xprop -root _DT_SAVE_MODE | grep ' = \"xfce4\"$' >/dev/null 2>&1; then
FALLBACKWM="${XFWM}"
fi
FALLBACKWM_OPTIONS="--replace $@"
# Driver whitelist
WHITELIST="nvidia intel ati radeon i810 fglrx"
# blacklist based on the pci ids
# See http://wiki.compiz-fusion.org/Hardware/Blacklist for details
#T=" 1002:5954 1002:5854 1002:5955" # ati rs480
#T="$T 1002:4153" # ATI Rv350
#T="$T 8086:2982 8086:2992 8086:29a2 8086:2a02 8086:2a12" # intel 965
T="$T 8086:2a02 " # Intel GM965
T="$T 8086:3577 8086:2562 " # Intel 830MG, 845G (LP: #259385)
BLACKLIST_PCIIDS="$T"
unset T
COMPIZ_OPTIONS="--ignore-desktop-hints --replace"
COMPIZ_PLUGINS="core"
ENV=""
# Use emerald by default if it exist
USE_EMERALD="yes"
# No indirect by default
INDIRECT="no"
# Default X.org log if xset q doesn't reveal it
XORG_DEFAULT_LOG="/var/log/Xorg.0.log"
# Set to yes to enable verbose
VERBOSE="yes"
# Echos the arguments if verbose
verbose()
if [ "x$VERBOSE" = "xyes" ]; then
printf "$*"
fi
# abort script and run fallback windowmanager
abort_with_fallback_wm()
if [ "x$SKIP_CHECKS" = "xyes" ]; then
verbose "SKIP_CHECKS is yes, so continuing despite problems.\n"
return 0;
fi
if [ "x$CM_DRY" = "xyes" ]; then
verbose "Dry run failed: Problems detected with 3D support.'n"
exit 1;
fi
verbose "aborting and using fallback: $FALLBACKWM \n"
if [ -x $FALLBACKWM ]; then
exec $FALLBACKWM $FALLBACKWM_OPTIONS
else
printf "no $FALLBACKWM found, exiting\n"
exit 1
fi
# Check if we run with the Software Rasterizer, this happens e.g.
# when a second screen session is opened via f-u-a on intel
check_software_rasterizer()
verbose "Checking for Software Rasterizer: "
if glxinfo 2> /dev/null | egrep -q '^OpenGL renderer string: Software Rasterizer' ; then
verbose "present. \n";
return 0;
else
verbose "Not present. \n"
return 1;
fi
# Check for non power of two texture support
check_npot_texture()
verbose "Checking for non power of two support: "
if glxinfo 2> /dev/null | egrep -q '(GL_ARB_texture_non_power_of_two|GL_NV_texture_rectangle|GL_EXT_texture_rectangle|GL_ARB_texture_rectangle)' ; then
verbose "present. \n";
return 0;
else
verbose "Not present. \n"
return 1;
fi
# Check for presence of FBConfig
check_fbconfig()
verbose "Checking for FBConfig: "
if [ "$INDIRECT" = "yes" ]; then
$GLXINFO -i | grep -q GLX.*fbconfig
FB=$?
else
$GLXINFO | grep -q GLX.*fbconfig
FB=$?
fi
if [ $FB = "0" ]; then
unset FB
verbose "present. \n"
return 0;
else
unset FB
verbose "not present. \n"
return 1;
fi
# Check for TFP
check_tfp()
verbose "Checking for texture_from_pixmap: "
if [ $($GLXINFO 2>/dev/null | grep -c GLX_EXT_texture_from_pixmap) -gt 2 ] ; then
verbose "present. \n"
return 0;
else
verbose "not present. \n"
if [ "$INDIRECT" = "yes" ]; then
unset LIBGL_ALWAYS_INDIRECT
INDIRECT="no"
return 1;
else
verbose "Trying again with indirect rendering:\n";
INDIRECT="yes"
export LIBGL_ALWAYS_INDIRECT=1
check_tfp;
return $?
fi
fi
# Check wether the composite extension is present
check_composite()
verbose "Checking for Composite extension: "
if xdpyinfo -queryExtensions | grep -q Composite ; then
verbose "present. \n";
return 0;
else
verbose "not present. \n";
return 1;
fi
# Detects if Xgl is running
check_xgl()
verbose "Checking for Xgl: "
if xvinfo | grep -q Xgl ; then
verbose "present. \n"
return 0;
else
verbose "not present. \n"
return 1;
fi
# Check if the nVidia card has enough video ram to make sense
check_nvidia_memory()
if [ ! -x "$NVIDIA_SETTINGS" ]; then
return 0
fi
MEM=$(${NVIDIA_SETTINGS} -q VideoRam | egrep Attribute\ \'VideoRam\'\ .*: | cut -d: -f3 | sed 's/[^0-9]//g')
if [ $MEM -lt $NVIDIA_MEMORY ]; then
verbose "Less than ${NVIDIA_MEMORY}kb of memory and nVidia";
return 1;
fi
return 0;
# Check for existence if NV-GLX
check_nvidia()
if [ ! -z $NVIDIA_INTERNAL_TEST ]; then
return $NVIDIA_INTERNAL_TEST;
fi
verbose "Checking for nVidia: "
if xdpyinfo | grep -q NV-GLX ; then
verbose "present. \n"
NVIDIA_INTERNAL_TEST=0
return 0;
else
verbose "not present. \n"
NVIDIA_INTERNAL_TEST=1
return 1;
fi
# Check if the max texture size is large enough compared to the resolution
check_texture_size()
# Check how many screens we've got and iterate over them
N=$(xdpyinfo | grep -i "number of screens" | sed 's/.*[^0-9]//g')
for i in $(seq 1 $N); do
verbose "Checking screen $i"
TEXTURE_LIMIT=$(glxinfo -l | grep GL_MAX_TEXTURE_SIZE | sed -n "$i s/^.*=[^0-9]//g p")
RESOLUTION=$(xdpyinfo | grep -i dimensions: | sed -n -e "$i s/^ *dimensions: *$[0-9]*x[0-9]*$ pixels.*/\1/ p")
VRES=$(echo $RESOLUTION | sed 's/.*x//')
HRES=$(echo $RESOLUTION | sed 's/x.*//')
verbose "Comparing resolution ($RESOLUTION) to maximum 3D texture size ($TEXTURE_LIMIT): ";
if [ $VRES -gt $TEXTURE_LIMIT ] || [ $HRES -gt $TEXTURE_LIMIT ]; then
verbose "Failed.\n"
return 1;
fi
verbose "Passed.\n"
done
return 0
# check driver whitelist
running_under_whitelisted_driver()
LOG=$(xset q|grep "Log file"|awk '{print $3}')
if [ "$LOG" = "" ]; then
verbose "xset q doesn't reveal the location of the log file. Using fallback $XORG_DEFAULT_LOG \n"
LOG=$XORG_DEFAULT_LOG;
fi
if [ -z "$LOG" ];then
verbose "AIEEEEH, no Log file found \n"
verbose "$(xset q) \n"
return 0
fi
for DRV in ${WHITELIST}; do
if egrep -q "Loading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG &&
! egrep -q "Unloading ${XORG_DRIVER_PATH}${DRV}_drv\.so" $LOG;
then
return 0
fi
done
verbose "No whitelisted driver found\n"
return 1
# check pciid blacklist
have_blacklisted_pciid()
OUTPUT=$(lspci -n)
for ID in ${BLACKLIST_PCIIDS}; do
if echo "$OUTPUT" | egrep -q "$ID"; then
verbose "Blacklisted PCIID '$ID' found \n"
return 0
fi
done
OUTPUT=$(lspci -vn | grep -i VGA)
verbose "Detected PCI ID for VGA: $OUTPUT\n"
return 1
build_env()
if check_nvidia; then
ENV="__GL_YIELD=NOTHING "
fi
if [ "$INDIRECT" = "yes" ]; then
ENV="$ENV LIBGL_ALWAYS_INDIRECT=1 "
fi
if check_xgl; then
if [ -f ${LIBGL_NVIDIA} ]; then
ENV="$ENV LD_PRELOAD=${LIBGL_NVIDIA}"
verbose "Enabling Xgl with nVidia drivers...\n"
fi
if [ -f ${LIBGL_FGLRX} ]; then
ENV="$ENV LD_PRELOAD=${LIBGL_FGLRX}"
verbose "Enabling Xgl with fglrx ATi drivers...\n"
fi
fi
ENV="$ENV FROM_WRAPPER=yes"
if [ -n "$ENV" ]; then
export $ENV
fi
build_args()
if [ "x$INDIRECT" = "xyes" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --indirect-rendering "
fi
if [ ! -z "$DESKTOP_AUTOSTART_ID" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --sm-client-id $DESKTOP_AUTOSTART_ID"
fi
if check_nvidia; then
if [ "x$INDIRECT" != "xyes" ]; then
COMPIZ_OPTIONS="$COMPIZ_OPTIONS --loose-binding"
fi
fi
# Execution begins here.
# Read configuration from XDG paths
if [ -z "$XDG_CONFIG_DIRS" ]; then
test -f /etc/xdg/compiz/compiz-manager && . /etc/xdg/compiz/compiz-manager
for f in /etc/xdg/compiz/compiz-manager.d/*; do
test -e $f && . $f
done
else
OLD_IFS=$IFS
IFS=:
for CONFIG_DIR in $XDG_CONFIG_DIRS
do
test -f $CONFIG_DIR/compiz/compiz-manager && . $CONFIG_DIR/compiz/compiz-manager
for f in $CONFIG_DIRS/compiz/compiz-manager.d/*; do
test -e $f && . $f
done
done
IFS=$OLD_IFS
unset OLD_IFS
fi
if [ -z "$XDG_CONFIG_HOME" ]; then
test -f $HOME/.config/compiz/compiz-manager && . $HOME/.config/compiz/compiz-manager
else
test -f $XDG_CONFIG_HOME/compiz/compiz-manager && . $XDG_CONFIG_HOME/compiz/compiz-manager
fi
# Don't use compiz when running the failsafe session
if [ "x$GNOME_DESKTOP_SESSION_ID" = "xFailsafe" ]; then
abort_with_fallback_wm
fi
if [ "x$LIBGL_ALWAYS_INDIRECT" = "x1" ]; then
INDIRECT="yes";
fi
# if we run under Xgl, we can skip some tests here
if ! check_xgl; then
# if vesa or vga are in use, do not even try glxinfo (LP#119341)
if ! running_under_whitelisted_driver || have_blacklisted_pciid; then
abort_with_fallback_wm
fi
# check if we have the required bits to run compiz and if not,
# fallback
if ! check_tfp || ! check_npot_texture || ! check_composite || ! check_texture_size; then
abort_with_fallback_wm
fi
# check if we run with software rasterizer and if so, bail out
if check_software_rasterizer; then
verbose "Software rasterizer detected, aborting"
abort_with_fallback_wm
fi
if check_nvidia && ! check_nvidia_memory; then
abort_with_fallback_wm
fi
if ! check_fbconfig; then
abort_with_fallback_wm
fi
fi
# load the ccp plugin if present and fallback to plain gconf if not
if [ -f ${PLUGIN_PATH}libccp.so ]; then
COMPIZ_PLUGINS="$COMPIZ_PLUGINS ccp"
elif [ -f ${PLUGIN_PATH}libgconf.so ]; then
COMPIZ_PLUGINS="$COMPIZ_PLUGINS glib gconf"
fi
# enable gnomecompat if we run under gnome
if [ x"$GNOME_DESKTOP_SESSION_ID" != x"" ] && [ ! -e ~/.compiz-gnomecompat ]; then
verbose "running under gnome seesion, checking for gnomecompat\n"
if ! gconftool -g /apps/compiz/general/allscreens/options/active_plugins|grep -q gnomecompat; then
verbose "adding missing gnomecompat\n"
V=$(gconftool -g /apps/compiz/general/allscreens/options/active_plugins|sed s/mousepoll,/mousepoll,gnomecompat,/)
if ! echo $V|grep -q gnomecompat; then
verbose "can not add gnomecompat, reseting\n"
gconftool --unset /apps/compiz/general/allscreens/options/active_plugins
else
gconftool -s /apps/compiz/general/allscreens/options/active_plugins --type list --list-type=string $V
fi
touch ~/.compiz-gnomecompat
fi
fi
# get environment
build_env
build_args
if [ "x$CM_DRY" = "xyes" ]; then
verbose "Dry run finished: everything should work with regards to Compiz and 3D.\n"
verbose "Execute: ${COMPIZ_BIN_PATH}${COMPIZ_NAME} $COMPIZ_OPTIONS "$@" $COMPIZ_PLUGINS \n"
exit 0;
fi
${COMPIZ_BIN_PATH}${COMPIZ_NAME} $COMPIZ_OPTIONS "$@" $COMPIZ_PLUGINS || exec $FALLBACKWM $FALLBACKWM_OPTIONS
That's it so far.
So again what i try to do is running compiz with metacity decorations.
I hope someone can help me here,
Mark.
Last edited by markg85 (2009-06-28 00:26:04)

whoops wrote:
Wait, what, I thought metacity isn't as window decorator, it is a window manager, right? I don't really get what you're trying to do... maybe install compiz-decorator-gtk and use it instead of emerald?
edit: aaah, yes, I think you're missing compiz-decorator-gtk, try that, look at fusion icon "window decorator" option again.
Strange.. i was under the impression that pacman -S compiz-fusion would install GTK and QT decorators... guess not.
This issue is fixed now. Running metacity decorations now WITH compiz.

My project gets an error message and crashes everytime I go to render or preview on AE

I have recently starting using AE on my computer, every now and then its struggled to work but I haven't had any major issues until now.
When I try to render or preview my project I've had an error message pop up saying:
"After Effects error: crash occurred while invoking effect plug-in "Shatter".
then followed by a second message
"After Effects error: Crash in progress. Last logged message was <6492> <getdepthpinflags> <5> 32:32 bit
and finally
"After Effects can't continue: sorry, After Effects has crashed. See http://www.adobe.com/support/products/aftereffects.html for known issues. If you still can't resolve this issue, please contact Adobe Technical Support (2).
it then asks me to save and crashes.
I think it may be to do with my computer specs as it does struggle at times in other areas on AE
can someone tell me if i need to buy something like a new graphics card or something?
I don't have any knowledge when it comes to computer specs so heres a link to all the specifications for my computer: HP Support document - HP Support Center
please help me! need to have this project finished so if I need to buy something new for the computer i need to buy it straight away
thanks

How much ram do you have installed? Which OS? Your link to specs provides no details for your system.
What version of AE are you using down to the last decimal point?
We need to know something about your project. The kind of footage used, the size of the comp you are trying to render, the render settings are all critical information.

Screen lags with catalyst and kernel linux-3.10.6-2

so I have been using arch for about a month now and it has been working fine. But since I installed linux-3.10.7-1 my screen started lagging.
when moving windows around the screen lags and when scrolling down in thunar it lags very much.
And I can't configure my monitors anymore in catalyst control center. same thing with the latest kernel: linux-3.10.9-1
so I downgraded to linux-3.10.6-2 for now and everything works fine.
catalyst version is catalyst 13.4-15, catalyst-utils 13.4-3
xorg version is xorg-server 1.13.4-1
I'm using openbox btw version = openbox 3.5.2-1
GPU = AMD Radeon HD 7850
Any idea what might cause this ?

Radioactiveman wrote:
Is the fglrx module loaded at all?
And what's the output of 'fglrxinfo'?
Most likely the fglrx module is incompatible with the recent kernel version.
A simple solution for this problem is using catalyst-hook.
THIS. You should do this because the kernel module in the catalyst package itself is compiled against the kernel Vi0L0 has on his/her system and there is no way to compile one for later kernels without installing the package Radioactiveman suggested.

GarageBand interface with Pianodisc and Firebox

I have a Piano equipped with Pianodisc hardware that should, in theory, output midi to garage band. I'm using a firebox as an interface. I have tried every connection imaginable, but can't seem to get garageband to recognize the midi output through the firebox. Does anyone have a similar set up and can lend some assistance? Thanks.

As you're using a midi interface, it is this device that GB should detect, not your piano. So - does GB say "1 midi device found" in the Preferences?

Why Does Logoc Pro (With Video Loaded) Crash When Changing Screensets?

Hi,
I have an annoying problem which has only started happening since I've been working in Logic Pro with a movie loaded.
The movie (.mov) is 2min 59 sec long and 3.2MB.
There are about 12 audio tracks with my voice commentary on them and I'm working on a music track to go behind video & voice.
My Mac OSX !0.5.7 has 7GB of RAM.
The crashes happen regularly but only when I change screen sets.
Thankfully the program saves my file every time but it is still annoying because I have to load up again.
I've also turned off automatic backups and a virus barrier but it does not help.
Has anybody had this problem?
any assistance is much appreciated.
thanks,
GB
PS: Since this movie project is my first, how do I save the movie with my voice commentary and music when I'm finished? Is it just a normal bounce?

Yes this is a known problem - with Quicktime. Downgrading to QT 7.4.5 works for some.
http://discussions.apple.com/click.jspa?searchID=-1&messageID=9755619

Does YouTube always lag with iPhones and iPads?

Once again I have a noob question. On my Android devices I have no lagging issues but on both my iPad2 and iPhone 4s (using the preloaded app)I can't get YouTube to play for more than a couple of seconds without lagging and freezing. Netflix works great on both apple devices . This does not matter if I am on wifi or 3G and I have checked for an app update. Does this happen to others?

Yes it does happen to others. It happens to me from time to time. It depends on - among other things - the speed of your Internet connection. I have the original iPad and the new iPad as well. I have no experience with Android devices so I can't comment on that or make any comparison.
If you wait until the video fully loads, or at least wait until it loads far enough in advance before you start to play it, it should play OK.

Why we give names with Z and Y alphabets

hi,
1. I have a doubt, while doing pricing procedure why we give the procedure names starting with series "Z" and "Y".
2. what is Item relevance for delivery? (in item catagories).

Hi Shaik,
Not only for Pricing Procedure, for any userdefined Transactions or any procedures we want to create we have to use the Alphabets Z or Y in the starting.
It has advantages like..
1. To identify that its user defined one, not part of the Standard SAP
2. The Major advantage is when the system is going to upgrade (eg. 4.6c to 4.7, or 4.7 to 6.0) while any upgradations takes place then the system only consider the standard code and the procedures or transactions which starts with Z or Y. So, we must mention Z or Y for our own defined procedure in SAP.
In Practicing time we can give any thing but if we are working on client systems then we must follow this rule.
Hope this give you some idea
REWARD IF HELPFUL
Regards,
Praveen

External monitor lag with W530 and K2000M

Hi all. I have a W530 connected to my NEC PA241W by DisplayPort. Whenever I use 'extend' mode, I get mouse lag on second screen. It only happens when there's a window on screen, eg a browser window, PDF, Word document. When there's nothing there, no lag. It also only happens in 'extend' mode, and only on the external display. There's no lag on the laptop display, and no lag when I'm running the external display alone.
I'm using a K2000M with the nVidia 310.34 drivers. I'm currently on Windows 8 but this was also happening on Windows 7 with older nVidia drivers. I'm in Optimus mode. I haven't changed any rendering settings, so I assume all the relevant windows are being rendered by the integrated GPU.
Any help would be greatly appreciated!
EDIT: I've just tried this on another display connected by DisplayPort as well and have the same problem, so it's not the monitor.
EDIT #2: I've just performed a full reset of the laptop from within Windows 8 (basically reformat and reinstall) with stock video drivers and the issue is still there. However, if I boot into discrete graphics mode, everything works fine. Maybe this suggests the issue is with the Intel graphics or Optimus?

Syllogistic wrote:
Sorry, yes, by 'stock video drivers' in my second edit I meant the Lenovo driver package. I did a complete reinstall of Win 8 installing the latest Lenovo video driver package and the lag was there immediately. The only other things I had installed were the other Lenovo drivers at that stage.
I've since upgraded the NVidia driver to 310.34 (doing a clean install over the old NVidia driver) and the lag is still there.
Ok thanks. If you are using Lenovo drivers then it is obviously for them to resolve. I took the Windows 7 route with the T430s I just ordered to avoid the early adopter pain.

Firefox lags with youtube and .gif images

Everytime I try to watch a video on YouTube or even on other sites FireFox lags aprox every 10 seconds. Is annoying. The same thing happens with .gif images.
How can I fix this?
== This happened ==
Every time Firefox opened
== Always

This can be a problem with session restore.
Firefox stores session data every 10 seconds to make it possible to restore a crashed session.
If you have (security) software that interferes with that or have many tabs open then that cause cause a delay.
Some have reported that increasing the session store saving interval worked for them.
See:
http://kb.mozillazine.org/browser.sessionstore.interval
http://kb.mozillazine.org/Session_Restore

Having issues making GarageBand work with iPad and line 6 midi mobilizer. Any suggestions?

I am having issues making the line 6 midi mobilizer for keyboard work with GarageBand for ipad2.

Check out the iRig Midi iRig MIDI

Why is my ipod classic freezing and crashing/deleting my itunes??

When I connect my ipod Classic to my laptop the screen on the ipod says that is connected (Eject before disconnecting etc) however my itunes isn't showing my ipod as being connected and therefore I can't sync.
As a bonus, my itunes freezes as soon as my ipod is connected to the laptop and I can't disconnect my ipod or close itunes. The first time this happened I had to shut my computer down to be able to disconnect and when I restarted it I was faced with a major system error! My computer told me that this was likely connected to a portible media device's installation software and Windows was thankfully able to run a self-diagnostic, solve the problem and restart after 2hours.
When i got restarted, itunes was gone from my system completely!!! I reistalled the software from itunes website and thankfully my music library was still there I thought I was in the clear but when I connected my ipod once again I encountered the same problems all over again.
This has only happened since I updated itunes software 2 weeks ago after an alert from itunes. I get these regularly and I always update and have never had any problems until now. I am not even sure which version I updated to as I just clicked install without paying much attention to the version number.
Can anyone offer help or advice? I'm going on holiday this weekend and the thought of a 12 hour flight with no music is horrible.
Thanks in advance.

Disconnect you iPod from the PC
Put your iPod into DiskMode, (refer to this Apple Support Article)
http://support.apple.com/kb/HT1363?viewlocale=en_US
Connect the iPod to PC, but close iTunes when it opens up, you need to do the iPod hardisk filesystem repair.
in my Computer or WinExplorer, right click the iPod->Properties->Tools
Click on Error Check
Tick on both Autofix filesystem and Scan for bad sector.
Click OK.
After finish the error check, disconnect and connect back the iPod (give a delay of 1 minute)
If iTunes launch, select the iPod and Restore.
The above should work if you don't have too many plugins installed that conflicts with iTunes, such as Antivirus, emails and skins that make the Vista to look like Windows 7 or Mac OS X.
Good Luck!

Why is Firefox "lagging" with certain websites ?

Why does it seem that http://www.bing.com/weather/ (and certain others) (I'd say 97-98 % of the time) cause the Firefox "not responding" message ? Granted Firefox recovers usually within about 30 seconds BUT it's getting to be really annoying because it seems that it's an ongoing problem.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Why is garageband lagging with audiobus and crashing everytime?

Similar Messages

Maybe you are looking for