Why is HDMI audio rerouted on reconnection?

I have a MacMini 2012 configured as a music server with its HDMI output connected to a HT receiver or preamp/processor.  I use a music server program (JRMC) to organize, select and output the audio.  All video and audio (8 channels, 24/96) is sent via HDMI to the processor.  However, if I choose another input on the processor (e.g., cable box or CD player) and then go back to the MacMini input, the video is fine but the audio has been reset to 2 channel and rerouted to CoreAudio or Internal Speakers. 
I can fix this by using Settings and/or Midi Audio but it is a real pain and makes the setup unusable by family members.  Is there some way to lock the audio output to HDMI with the fixed settings?
FWIW, I have tried this with other music server programs (e.g., Audirvana, Decibel) and with several processors but the results are the same.

Hello Frida,
I would recommend troubleshooting Safari with these 2 articles:
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
and
Safari 6 (OS X Mountain Lion): Reset Safari
http://support.apple.com/kb/ph11914
All the very best,
Sterling

Similar Messages

  • HP Pavilion dv9218tx Notebook PC and HDMI audio problem with Sony TV and Windows 7

    Sound does not come through with the HDMI connection and, on investigation, there is no HDMI audio driver/option.
    Noting that there seemed to be an issue with windows 7 and HDMI audio which is addressed by updating the BIOS and the connexant sound driver I have done so to no effect.
    The Sony TV is recognised as a standard monitor in the devices for graphics but not for audio
    Suggestions as to why HDMI does not appear - including as a disabled service - and what to do t get is available?

    Hello everyone,
    Thanks for posting on the HP Forums!
    I will definitely assist you with lack of sound issues. Before anything else is done, please make sure you try every step in this thread: Troublesho​oting Guide: Audio does not Work after a Certain Period of Time
    If every step does not help, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    5. What steps have been attempted from my first post on this thread, and what were the results?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Either way, let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

  • *** dv4-1413tx No HDMI Audio to TV

    Please help.
    When I plug in the HDMI cable, I only get the Video on LCD TV screen. But there is no audio sound from LCD TV speakers. The audio only output thru dv4-1413tx speakers.
    I have tried changing the Default Sound to NVida HDMI audio - but still no audio. When click Test Sound, the audio bar is bumping up and down, but no audible sound from LCD TV speakers
    In fact, I notice that once I plug it the HDMI cable, after a short while, the LCD TV will beam up the desktop screen, and when I click on the Sound icon at System tray, it also indicates that it has switched to NVida HDMI audio output. But there is no audio sound on LCD TV speakers. I need to change the Default Sound to notebook speakers, then I get audio sound, and it is output from the notebook, but the video on LCD TV.
    I have also tried all HDMI ports of the LCD TV - only Video, NO Audio
    Why? I understand that HDMI is capable of transmitting video and audio right??? 
    Please advise how I am supposed to get HDMI audio to LCD TV speakers.......tks.

    may be the connector, Give this a try, take your playbook with the hdmi adapter to the place where it was purchased ad try it on the same model. you can see if t is the adapter or tv
    Be a Shepard and not an iSheep.

  • [SOLVED] HDMI audio not functioning

    I'm having trouble getting audio working. My setup is audio through HDMI, but I actually don't have a way to test audio through any other means, so I'm not sure if HDMI has anything to do with the problem.
    My onboard video chipset is ATI Radeon HD 4250, and so I have added "radeon.audio=1" to my GRUB's boot entry, however nothing seemed to change. Where I seem to be stuck is that aplay will not pick up any sound devices:
    $ aplay -l
    aplay: device_list:252: no soundcards found...
    From http://lkubuntu.wordpress.com/2011/07/2 … eshooting/ I was able to yield the following:
    $ lspci -nn | grep '04[80][13]'
    00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
    01:05.1 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI RS880 HDMI Audio [Radeon HD 4200 Series] [1002:970f]
    From some commands in the ALSA page at the wiki:
    $ lsmod | grep '^snd' | column -t
    $
    $ ls -l /dev/snd
    ls: cannot access /dev/snd: No such file or directory
    No idea why almost all of the commands I'm seeing are returning the opposite of what they should. Any ideas?
    Last edited by skoh-fley (2012-03-10 19:05:13)

    Thanks for your replies guys! Using both of your posts' information I was able to get HDMI audio working. Here's what I did:
    # modprobe -v snd-hda-intel
    FATAL: Module snd-hda-intel not found.
    At this point I found a post that suggested reinstalling kernel26:
    # pacman -S kernel26
    warning: linux-3.2.9-1 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): linux-3.2.9-1
    Total Installed Size: 57.45 MiB
    Net Upgrade Size: 0.00 MiB
    And after that all the commands starting working:
    # modprobe -v snd-hda-intel
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/soundcore.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-timer.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-page-alloc.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-pcm.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/core/snd-hwdep.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-codec.ko.gz
    insmod /lib/modules/3.2.9-1-ARCH/kernel/sound/pci/hda/snd-hda-intel.ko.gz
    # cat /proc/asound/{cards,devices}
    0 [SB ]: HDA-Intel - HDA ATI SB
    HDA ATI SB at 0xfeb00000 irq 16
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfe710000 irq 19
    2: [ 0- 2]: digital audio capture
    3: [ 0- 1]: digital audio playback
    4: [ 0- 0]: digital audio playback
    5: [ 0- 0]: digital audio capture
    6: [ 0- 0]: hardware dependent
    7: [ 0] : control
    8: [ 1- 3]: digital audio playback
    9: [ 1- 0]: hardware dependent
    10: [ 1] : control
    33: : timer
    Using this information I just followed OrionFyre's instructions and the sound works perfectly! Thanks all!

  • [SOLVED] HDMI audio not working (worked in Ubuntu)

    hi there,
    I have very new hardware (Intel Core i5 2500, using the internal GPU) and already knew that it would probably take me a while to get everything working (especially the GPU). I first tried Ubuntu 11.04 Alpha with the xorg-edgers ppa, which already supported the new GPU, including 3D acceleration... unfortunately, it made my X server crash about every 15 minutes. Having heard about ArchLinux before I thought I should give it a try. Turned out the packages that I need for my GPU are only available in testing (xf86-video-intel 2.14, Mesa 7.10, Kernel 2.6.37), so I'm running on the testing repository right now. But I gotta say that I'm pretty impressed by ArchLinux, Compiz is working perfectly smooth and the whole system feels way faster than Ubuntu.
    Now regarding my problem, I can't get my HDMI audio to work. Usually I would have said to myself "well, ALSA doesn't support it yet, I guess I'm gonna have to wait" . But the reason I'm writing this thread anyway is that it was working fine in Ubuntu 11.04 Alpha. In Ubuntu, I could use the alsa device hdmi:CARD=PCH,DEV=2 for HDMI audio. The strange thing is, this device doesn't exist on my ArchLinux system. Here is my "aplay -L" output.
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=PCH
    HDA Intel PCH, ALC892 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=PCH,DEV=0
    HDA Intel PCH, ALC892 Digital
    IEC958 (S/PDIF) Digital Audio Output
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    In Ubuntu, I also had hdmi:CARD=PCH,DEV=1 and hdmi:CARD=PCH,DEV=2. So my question is, why are those missing on my system? Kernel and ALSA are the same version (2.6.37 / 1.0.23)!? I also already downloaded a Daily Snapshot of ALSA and did a ./configure, make, sudo make install - still no luck. And btw, DEV=0 outputs sound through my default speakers...
    cat /proc/asound/pcm
    00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
    00-01: ALC892 Digital : ALC892 Digital : playback 1
    00-03: HDMI 0 : HDMI 0 : playback 1
    00-07: HDMI 1 : HDMI 1 : playback 1
    00-08: HDMI 2 : HDMI 2 : playback 1
    cat /proc/asound/cards
    0 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xfe620000 irq 51
    any help would be appreciated..
    ...and really thanks to the whole community, my system is stable as never before and the ArchLinux Wiki is probaby the first Linux Wiki that actually helped me solve my problems.
    Last edited by 65kid (2011-01-27 18:05:09)

    Nevermind, I fixed it myself. ;)
    cat /proc/asound/pcm
    00-00: ALC892 Analog : ALC892 Analog : playback 1 : capture 1
    00-01: ALC892 Digital : ALC892 Digital : playback 1
    00-03: HDMI 0 : HDMI 0 : playback 1
    00-07: HDMI 1 : HDMI 1 : playback 1
    00-08: HDMI 2 : HDMI 2 : playback 1
    00-08 is the missing device I was talking about, aplay -L doesn't list it, but it's there. Anyway, I can use plughw:0,8 to use HDMI audio and it works fine, although I'm still confused about the difference betwenn plughw:x,x and hdmi:CARD=PCH,DEV=X...

  • Need assistance with AMD drivers (HDMI Audio Out)

    Short version:
    I have an older AMD graphics card that won't work right with the open source drivers. The proprietary driver would potentially fix my problems, but it is incompatible with my current system.
    Long version:
    I've got this lovely old AMD Graphics card, which happens to be a Radeon HD 4250 card, and despite all of the help articles in the wiki, as well as the AMD Bar & Grill thread, I still can't get the darn thing to work properly. As of right now, I'm currently using the open-source xf86-video-ati driver. While it's a nice driver that performs well for day-to-day things, I can't seem to get the more nitpicky things working properly. One such thing, is HDMI Audio support.
    Now don't go and bite my head off just yet: yes, I did read the help articles for that problem as well. I must have tried every possible fix in them, and then some. Video-out through HDMI works, at least. It's only when I try to force the audio (by adding radeon.audio=1 to GRUB) when my TV tells me it can't recognize the signal. Through all of this extensive trial-and-error, I've basically concluded that I have no other choice but to use the proprietary fglrx driver from AMD. Yay.
    Sure, sounds easy enough, right? Not really...
    Since my card is a bit older than the others, my only option is to use the 12.6 legacy version of the driver, which only supports Xorg version 1.12 and lower, as well as version 3.4 or lower of the Linux kernel. As most of us know, with Arch Linux being the bleeding-edge distro as it is, I currently run Xorg version 1.14 with Linux kernel 3.8. I've searched around for a possible way to downgrade both of these to the appropriate versions, but I've gotten more or less the same answer: downgrading is more trouble than it's worth.
    SO.... that brings me to this:
    I think I need to completely reinstall Arch Linux from the ground-up, once more. This time, however, I think I need to somehow tell it to install with older versions of both Xorg and the Linux kernel. This way, fglrx has no reason to be incompatible with my system, and I can finally quit fighting this problem and go on with my life. I'm not quite sure how to go about doing this (or if it's possible, for that matter), but that's why I'm here, and I'm definitely willing to try it in order to get this solved once and for all.
    Of course, this is just my theory of how to fix this, but if anyone thinks they can help me get the open source drivers to behave properly, please, be my guest.
    Either way, any and all help is greatly appreciated.
    Thanks!
    P.S.
    I wasn't sure what terminal outputs anyone may have needed for this, so if someone needs to see a particular output from the terminal, just ask.
    Last edited by BJSerpas (2013-04-27 22:04:24)

    Lone_Wolf wrote:Which HDMI versions do card, tv and hdmi cable provide/support ?
    I'm not quite sure what HDMI version the TV has. It's a Magnavox 32ME402V 32" HDTV, if it's relevant. Same goes for the laptop. It's a Pavilion dv6-3025dx laptop, but I have no ide what version of HDMI it's currently running. I'd suspect both of them are running something along the lines of 1.3 or 1.4, but I don't know. The cable is, well, a cable. I know it's a Sony brand cable, and the box advertised it for the PS3, though the box doesn't specify an HDMI version either.
    Lone_Wolf wrote:Are you using alsa, pulseaudio , oss for sound system ?
    As of right now, I've been sticking with alsa. I think pulseaudio is installed, but everything is set to use alsa.
    Lone_Wolf wrote:for a pure alsa system, post the output of aplay --list-devices --list-pcms
    Here you are:
    # aplay --list-devices --list-pcms
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=SB
    HDA ATI SB, STAC92xx Analog
    Default Audio Device
    front:CARD=SB,DEV=0
    HDA ATI SB, STAC92xx Analog
    Front speakers
    surround40:CARD=SB,DEV=0
    HDA ATI SB, STAC92xx Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=SB,DEV=0
    HDA ATI SB, STAC92xx Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=SB,DEV=0
    HDA ATI SB, STAC92xx Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=SB,DEV=0
    HDA ATI SB, STAC92xx Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=SB,DEV=0
    HDA ATI SB, STAC92xx Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=HDMI,DEV=0
    HDA ATI HDMI, HDMI 0
    HDMI Audio Output
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Lone_Wolf wrote:check in alsamixer the hdmi is not muted (just in case)
    No, it's not muted. When I check the HDMI device, it's set to 00 and I have no option of changing it. It's just stuck to that.
    Lone_Wolf wrote:Try aplay --device=name_of_hdmi_device /path/to/some/soundfile
    Yeah, I've tried that. It doesn't play out to the TV, but if I set the device to my laptop speakers, the sound test works (unsurprisingly).

  • Why is the audio on my video getting out of sync when it is imported into itunes?

    Hello,
    I have videos in the MP4 Format, and have imported them into itunes. However, during playback in itunes, the audio gets more and more out of sync as the video plays. By the end of the film the audio can be 5-6 seconds out!
    What's strange is that the source file, played with quicktime or Windows media player, is fine and works perfectly.
    Why is the audio stretched once it is imported?
    Thanks,
    James

    I have the same problem.
    Motherboard: Gigabyte GA-MA785GPMT-UD2H
    Chipset:
    North Bridge: AMD 785G
    South Bridge: AMD SB710
    Video: Integrated ATI Radeon HD 4200
    HDMI Audio through the HDMI port out to the TV.
    Tried on Windows 7 Pro 32bit and Windows 8.1 Pro 64bit.
    Tried with the integrated ALC889A audio device enabled and disabled (It seems that the video card drives the HDMI audio device though, because it still appears in Windows even if I disable the Audio device in BIOS).
    Latest iTunes and drivers installed.
    I have already tried all sugestions about matching Windows Audio settings to iTunes settings (bit depth, frequency rate).
    Apple, any suggestions? I'm not having a great customer experience after buying a pair of HD movies in iTunes.

  • Latest Update(s) breaks my HDMI audio output after a sleep

    Have a Mac Mini HD, since the latest spate of updates the HDMI audio stops working after a sleep.
    A reboot will allow the audio output to work again but this is exactly why I abandoned Windows! So please FIX this ASAP.
    Anyone else seeing this?

    Hi,
    Please select the right operating system (32 or 64 bit) for your machine, download and install it:
        http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4062&lc=en&cc=us&dlc=en&sw_lang=&product=5051...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • No Sound on nvidia hdmi audio driven display

    I have installed arch on my Dell Dimension XPS 410 with a NvidiaGeforce 210.
    out put from lspci
    01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 210] (rev a2)
    01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1)
    uname -ar out put
    Linux shannon 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux
    I have installed nvidia and nvidia-utils how ever I hav e yet to get the hdmi driven audio on my Dynex 32''  Lcd tv which i use as a  repalce ment from an older  dell 2005 FPW.
    My question is how do i get my hdmi fed audio working on the aformentioned  LCD tv?
    lspci | grep nvidia
    nvidia              11783197  40
    i2c_core               20165  3 nvidia,videodev,i2c_i801
    aplay -l
    card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    How do i get thiss hdmi audio device working?
    Last edited by arch_porter88 (2011-08-02 15:19:06)

    Try using this command with all the listed devices until you hear sound from one of them.
    aplay -D hw:1,9 /usr/share/sounds/alsa/Front_Center.wav
    Also, go into alsamixer, press F6 to go to the right sound card, and unmute everything by pressing M (OO means on, MM means muted). For me, I have a similar aplay -l, and for some reason, the correct device for me also hw:1,9 (no clue why there's four of them...), and things like pulse just assume it's 1,3. If you use ALSA, it should be easy to set it up in /etc/asound.conf. If you want pulse, you might have to go into /etc/pulse/default.pa and add a line like this in order for the correct card to show up, it worked for me on my GT430:
    load-module module-alsa-sink device="hw:1,9" sink_name=digital_output
    Last edited by doorknob60 (2011-08-02 18:10:28)

  • Mac mini 2011 HDMI audio issues

    What are the known issues with HDMI audio with Lion and the new Mac minis?
    I'm in the process of swapping out an older Mac mini that was connected to my home theater (Pioneer SC-05 reciever, Pioneer TV), with a new 2011 i5 Mac mini.  The old Mac required use of a minidisplay port to HDMI adapter, and a toslink adapter to get audio to receiver through an optical cable.  Previous setup was working fine, but with the new 2011 Mac mini swapped in with the direct HDMI connection to the Pioneer SC-05 receiver, I'm not getting 5.1 audio.  The video is fine and is being passed through to the TV, but the receiver is only doing dolby prologic audio, even though the movies are Dolby Digital 5.1.
    I'm using Plex .934 on the Mac.  Audio on the Mac is set to HDMI.  Plex is set to Dolby (AC3) digital capable receiver, etc.

    Hi All, I have the new 2011 macmini to replace the 2010 version. I had issues with HDMI sound as well, but it turns out the issue lies in having AND the HDMI cable in AND a toslink/headphones cable.
    In the 2010 version you could select the Sound output to go via HDMI or Analog.
    In the 2011 version (if you have plugged-in a cable in the headphones) the HDMI sound output is impossible to choose. It is only selectable when you have unplugged the headphones cable. So what is the use of the Output settings if you cannot select anything if you have more than 1 output.....
    The guy form AppleCare told me this is a firmware bug that 'should' be solved.....
    When I unplug the headphones and start a movie in Movist, I have DTS and DD. With VLC it does not work, but that has to do with the upgrade to Lion (see the VLC forum).
    I assume the firmware upgrade will come soon otherwise I will be VERY dissapointed in Apple quality this time and will certainly stop buying new Apple gadgets when they come out. As this was the reason why I switched from Microsoft to Apple......

  • Radeon HDMI audio out defaults to disabled

    A quirk that I've been noticing on my system for a while now is that playing audio via the HDMI cable on my Radeon 5450 doesn't work just after my system has booted (i.e. on the tty console, I do startx manually). Alsamixer doesn't show the output as being muted, and application that play sound (such as aplay /dev/urandom) don't throw an error, but nothing is heard from my monitor's speakers.
    Now, if I run startx and try playing audio in an xterm, it starts working. It continues to work if I quit my X session, up until I reboot my system. I've tried weston as well, because that does DRI modesetting like Xorg does, but sound refuses to work if I run that; no matter what I do, no sound can be heard from the monitor speakers until Xorg has run at least once.
    I figured it must be something that specifically Xorg does when it detects HDMI outputs as it starts up. This would seem to be supported by the fact that it's possible to mute the audio out for a HDMI output connector via an xrandr command, like so:
    xrandr --output HDMI-0 --set audio off
    (and likewise with "on" for enabling again).
    Another interesting pointer is a control shown by
    amixer controls
    when ran against the HDMI audio "card", called "HDMI/DP,pcm=3 Jack". The value of this control is "off" when ran before Xorg is started (i.e. no sound), and "on" after Xorg is run (i.e. sound working). This would suggest that the audio "jack" for this output is not detected, despite the fact that there's a HDMI monitor plugged in.
    Has anyone else encountered a similar situation with the HDMI audio out on radeon cards? And if so, how did you fix it? Is there a tool somewhere that can do what Xorg seems to do without needing to startx (i.e. NOT xrandr)?
    I realize that for most people, audio will only be played after a graphical X session was started anyway (i.e. a music player application), but Xorg won't be the main windowing system forever, and sometimes I like playing music on my console without having to startx (currently using the motherboard's onboard sound until I can fix this), so starting and quitting Xorg just to "unmute" the audio on the HDMI connector seems a long-winded workaround. Plus, it seems quite strange that the kernel can do modesetting on the HDMI display just fine but seems to need a userspace application to tell it when to enable the audio part.
    Any pointers, info or docs as to why this is a thing or how to work around it (without Xorg, please ) would be appreciated.
    (NB: I've tried looking at the Xorg source code, the result was me getting lost in there with a headache >.< )
    Cheers, D^2
    EDIT: A bit more poking around:
    - Changing the DDX (i.e. to something like xf86-video-modesetting) doesn't affect the sound starting to work after Xorg is run; it would seem this rules out anything weird poking done by xf86-video-ati, so it looks more like the sound enabling does happen at the xrandr level.
    - The adformentioned amixer control for jack detection is a read-only property, I can't set it using amixer ("Operation not permitted").
    Last edited by deltasquared (2014-12-07 10:26:17)

    I did what is said here but audio will not work.
    kernel /boot/vmlinuz26 root=/dev/disk/by-uuid/f16ef16a-2e5c-4725-97e0-9ae1f947c86f ro nomodeset radeon.audio=1
    My alsa-info is http://www.alsa-project.org/db/?f=0eb0e … 26897b908c
    Notable is the fact that when running
    $ aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    there is no error but the program finishes instantly, rather than being busy for 1.43 seconds which it usually takes to play back that sound.
    speaker-test -D plughw:0,3
    also rapidly progresses to the next tests.
    alsamixer only has one option: "S/PDIF:ON"
    One more info: I also have an on-board sound card, which uses the same module, so I disabled it in BIOS.
    I'd be glad to have my audio back.
    PS: oh. - http://www.x.org/wiki/RadeonFeature
    Last edited by qubodup (2011-11-12 17:18:00)

  • Does X-Fi MB3 work with GeForce HDMI audio device?

    If I buy http://software.store.creative.com/s...106-21569.aspx, will it work with my GTX 760's HDMI audio device which I'm connecting to my receiver?

    Funny fact: Today, after a reboot, the card worked again... Dunno why... But it does...

  • Wanting sound quality closer to HD caliber. Using gigaworks. Just bought a vid card with hdmi audio

    I just got a GTX 560 TI, and my dilemma arose after installing this card and then trying out the HDMI audio, and being amazed at the sound quality I am NOT getting by simply using my sound card. Here are some of my specs which are relevant. I have the said video card, a Sound Blaster X-Fi XtremeGamer, a Samsung 40" LCD I use as a monitor, and an Asus P5N motherboard. Also, I am using Creative Gigaworks 7.1 750s speakers. I'm running a mini-hdmi to hdmi cable from my card to TV. Basically I am hearing sound quality from my TV that is absolutely superior to anything that has come out of my speakers and am now wanting to achieve better sound quality for my speakers, but how? Should I get a Sound Blaster X-Fi Titanium Fatal1ty? New speakers is definitely not what I am looking for right now, and besides that, they are a very powerful set of 7.1's that you just can't find anymore. I know there are HDMI sound cards, but I doubt I would be able to plug my speakers into those. Is there better software I can download to go along with my sound card? I've updated PowerDVD on the off-chance that it would help (even though I knew it wouldn't). I'm really not sure how much help getting a fatal1ty sound card would be. Any suggestions on how to get my PC speakers running up to or NEAR to HD quality?

    $200 at all? So no new sound card? Or 200 for receiver only? So following setups are possible using a receiver:
    - Use SB, Receiver: so you connect from SB analog to Receiver and from their analog to Speakers, use HDMI/DVI for video seperately. IMHO Bad as it uses much analog points and would have bad sound quality. As long as you don't buy a quality SB, real good analog cables, good receiver. And so we speek over 1000$
    - Use GPU and Receiver directly via HDMI. Then Analog to Speakers and HDMI/DVI to TV. No real extra SB needed, but be aware that if you got an nvidia card it may be you need to connect the sound via SPDIF - check: [url=http://www.hardwaresecrets.com/article/600/">http://www.hardwaresecrets.com/article/600/[/url] . But as SPDIF only provides 1,5Mbit/s (6Mbit/s in rare cases) and formats like Dolby True HD/Digital Plus, DTS HD Master need 18-25 Mbit/s you won't get highest quality possible as software downsamples quality. But i think anyway these formats are not supported by GPU, thats why 3rd solution exists
    - As written above use GPU to SB via HDMI, SB to Receiver via HDMI, Receiver to Speakers via Analog. Most expensive as you need new SB and Receiver but thats the way they want high end sound being provided.
    Keep in mind that on 2nd and 3rd solution the receiver must have HDMI I/O! Also check HDMI Version! 1.3/1.4? 7.1 is not nessacary (as your speakers can do 5.1 to 7.1 upmix [url=http://support.creative.com/Products/ProductDetails.aspx?catID=4&amp;subCatID=792&amp;p rodID=9306&amp;prodName=GigaWorks%20S750&amp;subCa tName=Multi-Channel%20Systems&amp;CatName=Speaker+Systems&amp; VARSET=prodfaq:PRODFAQ_9306,VARSET=CategoryID:4">h ttp://support.creative.com/Products/ProductDetails.aspx?catID=4&amp;subCatID=792&amp;p rodID=9306&amp;prodName=GigaWorks%20S750&amp;subCa tName=Multi-Channel%20Systems&amp;CatName=Speaker+Systems&amp; VARSET=prodfaq:PRODFAQ_9306,VARSET=CategoryID:4[/url] ) but you buy a receiver normally just once and so i would recommend to get that too. If you want a good one LipSync, Deep Color, x.v.Color should be onboard too.
    So on the second part - why do you think you have to buy new cables and sub? And did i get you right - you want to directly connect the speakers with receiver? No, you have to connect to a sub. Well, if you want the receiver to do the upmix you need the seperate available 4x Stereo or RCA cables as i don't think an receiver will provide 7.1 via the supplied 4x to 3x 7.1 Audio cable.

  • A88XM Gaming + R9 270x HDMI Audio Skipping/Dropping

    I have been using HDMI audio out for a long time and I have NEVER run into this issue. I have just spent the last 6 hours trying to troubleshoot this issue and I am about to RMA this board and go with an Intel.
    I have an MSI R9 270x and used it with an Asrock A88X board and never had an issue. I "upgraded" to the MSI A88XM Gaming motherboard and now this same video card has audio skipping and dropouts over HDMI.
    I have done the following:
    1. New HDMI Cable.
    2. AMD Catalyst uninstall/reinstall/upgrade/rollback - pretty much everything you can possibly do to troubleshoot a driver issue. Went into safe mode to wipe drivers using DDU.
    3. Finally resorted to reinstalling Windows 8.1. Did NOT fix issue.
    4. Bios is up to date. Drivers are up to date. Have disabled and enabled realtek device in system properties. Nothing changes the sound issues.
    I can't for the life of me figure out why I am having audio issues. Video displays perfectly fine, not a single issue. But audio keeps dropping for a split second to my surround receiver, as if the PCM audio stream gets cut. Sometimes there's what seems to be static sounds as well.
    It's really annoying. Again, I have had this card for a couple of months and have been using HDMI for a long time, with my 7870 and my 6850 before that. I have never had this issue before. I do not wish to use Digital Optical because it doesn't do 5.1 PCM out to my soundsystem.
    Please help me, I am about to give up on this motherboard.

    Quote from: Nichrome on 27-August-14, 01:28:55
    I would argue about this. Indeed they are a bit more supportive for Intel boards, but let's be fair: Intel has released quite few NEW series, whereas AMD hasn't released anything new yet (FX4-8 were around for years, and still the same socket). That is why MSI releases more BIOSes for Intel based boards, as these are more common. Just about 9 series came out, and now X99 will come out with DDR4 for Intel. Whereas for AMD I still haven't heard anything about plans of releasing boards based on DDR4. So that doesn't surprise me why they support Intel more than AMD. AMD is way behind Intel (and that's not an opinion but the fact). And surely not just MSI is more supportive for Intel, but it depends on popularity of brand's boards, because if Asus AMD boards are more popular than Intel, then obviously they will more likely support AMD based board, rather than Intel.
    You don't get what I am saying here. I'm just gonna cherry pick this example:
    http://www.msi.com/support/mb/A88XG45_GAMING.html#down-bios
    1 Bios update since launch.
    http://www.msi.com/support/mb/Z97-GAMING-7.html#down-bios
    4 Bios update since launch.
    Two of the top high end boards for each respective platform, both released recently. In fact, Intel is more recent. You can clearly see that they are more interested in providing post launch support for Intel vs AMD.
    Go to Asus webpage, and just pick any A88X board, even the mid range ones. You can see a bunch of bios updates, same with Asrock, same with Gigabyte.
    I can't honestly believe this board has been out since early march and already post launch support is dead. As a motherboard manufacturer, you don't win customers with fancy features and cool looks. You win customers based on post lauch tech support.
    Check this thread:
    http://www.overclock.net/t/1469169/msi-a88x-g45-gaming-fm2-goodness
    People who are mid range enthusiasts ARE in fact interested in this board. But BIOS issues stagnate any interest in it, along with VRM issues.
    It's a great board, and MSI has what seems to be good AMD offerings, but they need to get their BIOSes right. Proof is right there on Newegg, pull up any AMD motherboard on Newegg and for every positive review, you have a negative review on issues with BIOSes and random things just not "working", no driver updates, etc.
    That's what I don't get. Why bother even releasing enthusiast directed AMD boards, and not bother supporting them after they have been launched?

  • [Solved] Issue setting HDMI audio to default

    Hoping I'm not overlooking something very simple here.
    I have a Radeon HD4650 in my HTPC which I'm trying to run the audio through the HDMI output. I've set the kernel parameter "radeon.audio=1" and am able to hear sound through HDMI when I specify it manually within each application (for example XBMC or VLC going to Audio->Audio Device->HD-Audio Generic, HDMI 0 HDMI Audio Output).
    From there I tried to set the HDMI audio as default by following the wiki here:
    https://wiki.archlinux.org/index.php/Al … sound_card
    And here:
    https://wiki.archlinux.org/index.php/Al … s_not_work
    I've tried several combinations within my .asoundrc and asound.conf including:
    pcm.!default {
    type plug
    slave.pcm {
    @func getenv
    vars [ ALSAPCM ]
    default "hw:0,3"
    defaults.pcm.card 0
    defaults.pcm.device 3
    defaults.ctl.card 0
    pcm.!default "plughw:0,3"
    ctl.!default "plughw:0,3"
    pcm.dmixer {
    type dmix
    ipc_key 2048
    slave {
    pcm "hw:0,3"
    period_size 512
    buffer_size 4096
    rate 48000
    format S16_LE
    bindings {
    0 0
    1 1
    pcm.!default {
    type plug
    slave.pcm dmixer
    pcm:iec958 {
    type plug
    slave.pcm dmixer
    pcm.!default {
    type plug
    slave {
    pcm "hw:0,3"
    ctl.!default {
    type hw
    card 0
    Most of these I just copied from the wiki or various forum posts I found and edited the proper device in. These appear to work, as the HDMI card shows up as default in alsamixer (I've made sure everything is unmuted here), but selecting the default channel in VLC still results in no sound, not even from the built in audio (I can change the output to the HDMI option and it works fine).
    I've also tried this which results in no sound:
    aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav
    Is there something I'm missing here?
    Here's my aplay -l:
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    A quick note here: I set this option in /etc/modprobe.d/:
    options snd_hda_intel index=-2
    This moved the HDMI card up to device 0 instead of 1. I've tried everything above as well with plughw:1,3 when that was the HDMI device.
    aplay -L:
    null
    Discard all samples (playback) or generate zero samples (capture)
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    sysdefault:CARD=Intel
    HDA Intel, ALC1200 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    iec958:CARD=Intel,DEV=0
    HDA Intel, ALC1200 Digital
    IEC958 (S/PDIF) Digital Audio Output
    lsmod | grep snd:
    snd_hda_codec_hdmi 29701 1
    snd_hda_codec_realtek 35517 1
    snd_hda_intel 35309 0
    snd_hda_codec 147474 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6332 1 snd_hda_codec
    snd_pcm 77765 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7234 2 snd_pcm,snd_hda_intel
    snd_timer 18718 1 snd_pcm
    snd 58950 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5418 1 snd
    amixer -c 0:
    Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 255 [100%] [0.00dB]
    Front Right: Playback 255 [100%] [0.00dB]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [on]
    dmesg:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.10.2-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.1 (GCC) ) #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013
    [ 0.000000] Command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ee6ffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ee70000-0x000000007eecbfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007eecc000-0x000000007fdf4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fdf5000-0x000000007fe00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007fe01000-0x000000007fe97fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fe98000-0x000000007fee7fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x000000007fee8000-0x000000007feebfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007feec000-0x000000007fef0fff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007fef1000-0x000000007fef1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007fef2000-0x000000007fefefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x000000007feff000-0x000000007fefffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007ff00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.4 present.
    [ 0.000000] DMI: /DG35EC, BIOS ECG3510M.86A.0118.2010.0113.1426 01/13/2010
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7ff00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000fe200-0x000fe20f] mapped at [ffff8800000fe200]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b22000, 0x01b22fff] PGTABLE
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7fa00000-0x7fbfffff]
    [ 0.000000] [mem 0x7fa00000-0x7fbfffff] page 2M
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7c000000-0x7ee6ffff]
    [ 0.000000] [mem 0x7c000000-0x7edfffff] page 2M
    [ 0.000000] [mem 0x7ee00000-0x7ee6ffff] page 4k
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x7eecc000-0x7f9fffff]
    [ 0.000000] [mem 0x7eecc000-0x7effffff] page 4k
    [ 0.000000] [mem 0x7f000000-0x7f9fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x7bffffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x7bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x7fc00000-0x7fdf4fff]
    [ 0.000000] [mem 0x7fc00000-0x7fdf4fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] [mem 0x7fe01000-0x7fe97fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] [mem 0x7fee8000-0x7feebfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] [mem 0x7fef1000-0x7fef1fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] [mem 0x7feff000-0x7fefffff] page 4k
    [ 0.000000] RAMDISK: [mem 0x7e79a000-0x7ee6efff]
    [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL )
    [ 0.000000] ACPI: RSDT 000000007fefd038 0004C (v01 INTEL ECG3510M 00000076 01000013)
    [ 0.000000] ACPI: FACP 000000007fefc000 00074 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: DSDT 000000007fef6000 05BEB (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: FACS 000000007fe98000 00040
    [ 0.000000] ACPI: APIC 000000007fef5000 00078 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: WDDT 000000007fef4000 00040 (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: MCFG 000000007fef3000 0003C (v01 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: ASF! 000000007fef2000 000A6 (v32 INTEL ECG3510M 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007fef0000 0020C (v01 INTEL CpuPm 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feef000 001B7 (v01 INTEL Cpu0Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feee000 001B7 (v01 INTEL Cpu1Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feed000 001B7 (v01 INTEL Cpu2Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: SSDT 000000007feec000 001B7 (v01 INTEL Cpu3Ist 00000076 MSFT 01000013)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007fefffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x7fefffff]
    [ 0.000000] NODE_DATA [mem 0x7fe93000-0x7fe97fff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007c600000-ffff88007e5fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0008efff]
    [ 0.000000] node 0: [mem 0x00100000-0x7ee6ffff]
    [ 0.000000] node 0: [mem 0x7eecc000-0x7fdf4fff]
    [ 0.000000] node 0: [mem 0x7fe01000-0x7fe97fff]
    [ 0.000000] node 0: [mem 0x7fee8000-0x7feebfff]
    [ 0.000000] node 0: [mem 0x7fef1000-0x7fef1fff]
    [ 0.000000] node 0: [mem 0x7feff000-0x7fefffff]
    [ 0.000000] On node 0 totalpages: 523716
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3982 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 8124 pages used for memmap
    [ 0.000000] DMA32 zone: 519734 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 000000007ee70000 - 000000007eecc000
    [ 0.000000] PM: Registered nosave memory: 000000007fdf5000 - 000000007fe01000
    [ 0.000000] PM: Registered nosave memory: 000000007fe98000 - 000000007fee8000
    [ 0.000000] PM: Registered nosave memory: 000000007feec000 - 000000007fef1000
    [ 0.000000] PM: Registered nosave memory: 000000007fef2000 - 000000007feff000
    [ 0.000000] e820: [mem 0x80000000-0xffefffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88007f800000 s86144 r8192 d24448 u524288
    [ 0.000000] pcpu-alloc: s86144 r8192 d24448 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 515507
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: root=/dev/system/root cryptdevice=/dev/sda2:system resume=/dev/system/swap ro radeon.audio=1 initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2042856k/2096128k available (4920k kernel code, 1264k absent, 52008k reserved, 4046k data, 1124k init)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
    [ 0.000000] NR_IRQS:4352 nr_irqs:712 16
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2188.974 MHz processor
    [ 0.006671] Calibrating delay loop (skipped), value calculated using timer frequency.. 4379.36 BogoMIPS (lpj=7296580)
    [ 0.006675] pid_max: default: 32768 minimum: 301
    [ 0.006714] Security Framework initialized
    [ 0.006729] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006937] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008033] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.008556] Mount-cache hash table entries: 256
    [ 0.008842] Initializing cgroup subsys memory
    [ 0.008862] Initializing cgroup subsys devices
    [ 0.008864] Initializing cgroup subsys freezer
    [ 0.008866] Initializing cgroup subsys net_cls
    [ 0.008868] Initializing cgroup subsys blkio
    [ 0.008905] CPU: Physical Processor ID: 0
    [ 0.008907] CPU: Processor Core ID: 0
    [ 0.008910] mce: CPU supports 6 MCE banks
    [ 0.008918] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008926] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    [ 0.009009] Freeing SMP alternatives: 20k freed
    [ 0.010372] ACPI: Core revision 20130328
    [ 0.013611] ACPI: All ACPI Tables successfully acquired
    [ 0.014894] ftrace: allocating 19564 entries in 77 pages
    [ 0.020479] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.055426] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (fam: 06, model: 0f, stepping: 0d)
    [ 0.056666] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.056666] perf_event_intel: PEBS disabled due to CPU errata
    [ 0.056666] ... version: 2
    [ 0.056666] ... bit width: 40
    [ 0.056666] ... generic registers: 2
    [ 0.056666] ... value mask: 000000ffffffffff
    [ 0.056666] ... max period: 000000007fffffff
    [ 0.056666] ... fixed-purpose events: 3
    [ 0.056666] ... event mask: 0000000700000003
    [ 0.090007] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.076769] smpboot: Booting Node 0, Processors #1
    [ 0.090021] Brought up 2 CPUs
    [ 0.090024] smpboot: Total of 2 processors activated (8759.72 BogoMIPS)
    [ 0.091305] devtmpfs: initialized
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7ee70000-0x7eecbfff] (376832 bytes)
    [ 0.091305] PM: Registering ACPI NVS region [mem 0x7fe98000-0x7fee7fff] (327680 bytes)
    [ 0.091305] RTC time: 21:34:09, date: 08/06/13
    [ 0.091305] NET: Registered protocol family 16
    [ 0.091305] ACPI: bus type PCI registered
    [ 0.091305] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.091305] PCI: not using MMCONFIG
    [ 0.091305] PCI: Using configuration type 1 for base access
    [ 0.093396] bio: create slab <bio-0> at 0
    [ 0.093411] ACPI: Added _OSI(Module Device)
    [ 0.093411] ACPI: Added _OSI(Processor Device)
    [ 0.093411] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.093411] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.094284] ACPI: EC: Look up EC in DSDT
    [ 0.097855] ACPI: Interpreter enabled
    [ 0.097864] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
    [ 0.097879] ACPI: (supports S0 S1 S3 S4 S5)
    [ 0.097881] ACPI: Using IOAPIC for interrupt routing
    [ 0.097896] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
    [ 0.098027] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
    [ 0.115962] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.116042] ACPI: No dock devices found.
    [ 0.121485] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.122691] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-7f] only partially covers this bridge
    [ 0.122777] PCI host bridge to bus 0000:00
    [ 0.122781] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.122783] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.122786] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.122788] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.122791] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000effff]
    [ 0.122793] pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfeafffff]
    [ 0.122795] pci_bus 0000:00: root bus resource [mem 0x80000000-0xefffffff]
    [ 0.122806] pci 0000:00:00.0: [8086:2980] type 00 class 0x060000
    [ 0.122920] pci 0000:00:01.0: [8086:2981] type 01 class 0x060400
    [ 0.122965] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.122994] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.123063] pci 0000:00:19.0: [8086:104b] type 00 class 0x020000
    [ 0.123081] pci 0000:00:19.0: reg 10: [mem 0x90b00000-0x90b1ffff]
    [ 0.123089] pci 0000:00:19.0: reg 14: [mem 0x90b24000-0x90b24fff]
    [ 0.123098] pci 0000:00:19.0: reg 18: [io 0x30c0-0x30df]
    [ 0.123156] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    [ 0.123180] pci 0000:00:19.0: System wakeup disabled by ACPI
    [ 0.123224] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
    [ 0.123264] pci 0000:00:1a.0: reg 20: [io 0x30a0-0x30bf]
    [ 0.123345] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.123387] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
    [ 0.123427] pci 0000:00:1a.1: reg 20: [io 0x3080-0x309f]
    [ 0.123507] pci 0000:00:1a.1: System wakeup disabled by ACPI
    [ 0.123560] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
    [ 0.123579] pci 0000:00:1a.7: reg 10: [mem 0x90b25400-0x90b257ff]
    [ 0.123661] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.123725] pci 0000:00:1a.7: System wakeup disabled by ACPI
    [ 0.123775] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
    [ 0.123790] pci 0000:00:1b.0: reg 10: [mem 0x90b20000-0x90b23fff 64bit]
    [ 0.123859] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.123926] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.123974] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
    [ 0.124043] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.124074] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.124118] pci 0000:00:1c.1: [8086:2841] type 01 class 0x060400
    [ 0.124188] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.124220] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.124264] pci 0000:00:1c.2: [8086:2843] type 01 class 0x060400
    [ 0.124333] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.124366] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.124414] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
    [ 0.124454] pci 0000:00:1d.0: reg 20: [io 0x3060-0x307f]
    [ 0.124522] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.124567] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
    [ 0.124607] pci 0000:00:1d.1: reg 20: [io 0x3040-0x305f]
    [ 0.124675] pci 0000:00:1d.1: System wakeup disabled by ACPI
    [ 0.124717] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
    [ 0.124757] pci 0000:00:1d.2: reg 20: [io 0x3020-0x303f]
    [ 0.124827] pci 0000:00:1d.2: System wakeup disabled by ACPI
    [ 0.124880] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
    [ 0.124899] pci 0000:00:1d.7: reg 10: [mem 0x90b25000-0x90b253ff]
    [ 0.124981] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.125043] pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 0.125088] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    [ 0.125156] pci 0000:00:1e.0: System wakeup disabled by ACPI
    [ 0.125205] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
    [ 0.125284] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
    [ 0.125289] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
    [ 0.125293] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
    [ 0.125376] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
    [ 0.125390] pci 0000:00:1f.2: reg 10: [io 0x3438-0x343f]
    [ 0.125399] pci 0000:00:1f.2: reg 14: [io 0x344c-0x344f]
    [ 0.125407] pci 0000:00:1f.2: reg 18: [io 0x3430-0x3437]
    [ 0.125415] pci 0000:00:1f.2: reg 1c: [io 0x3448-0x344b]
    [ 0.125423] pci 0000:00:1f.2: reg 20: [io 0x3410-0x341f]
    [ 0.125432] pci 0000:00:1f.2: reg 24: [io 0x3400-0x340f]
    [ 0.125461] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.125543] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
    [ 0.125555] pci 0000:00:1f.3: reg 10: [mem 0x90b25800-0x90b258ff]
    [ 0.125582] pci 0000:00:1f.3: reg 20: [io 0x3000-0x301f]
    [ 0.125683] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
    [ 0.125697] pci 0000:00:1f.5: reg 10: [io 0x3428-0x342f]
    [ 0.125706] pci 0000:00:1f.5: reg 14: [io 0x3444-0x3447]
    [ 0.125714] pci 0000:00:1f.5: reg 18: [io 0x3420-0x3427]
    [ 0.125722] pci 0000:00:1f.5: reg 1c: [io 0x3440-0x3443]
    [ 0.125730] pci 0000:00:1f.5: reg 20: [io 0x30f0-0x30ff]
    [ 0.125739] pci 0000:00:1f.5: reg 24: [io 0x30e0-0x30ef]
    [ 0.125768] pci 0000:00:1f.5: PME# supported from D3hot
    [ 0.125901] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
    [ 0.125917] pci 0000:01:00.0: reg 10: [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.125930] pci 0000:01:00.0: reg 18: [mem 0x90a00000-0x90a1ffff 64bit]
    [ 0.125939] pci 0000:01:00.0: reg 20: [io 0x2000-0x20ff]
    [ 0.125954] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]
    [ 0.125992] pci 0000:01:00.0: supports D1 D2
    [ 0.126044] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
    [ 0.126060] pci 0000:01:00.1: reg 10: [mem 0x90a20000-0x90a23fff 64bit]
    [ 0.126130] pci 0000:01:00.1: supports D1 D2
    [ 0.126194] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.126198] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.126201] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.126206] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.126282] pci 0000:02:00.0: [1106:3432] type 00 class 0x0c0330
    [ 0.126300] pci 0000:02:00.0: reg 10: [mem 0x90900000-0x90900fff]
    [ 0.126416] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.130024] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.130034] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.130126] pci 0000:03:00.0: [1131:7164] type 00 class 0x048000
    [ 0.130153] pci 0000:03:00.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
    [ 0.130174] pci 0000:03:00.0: reg 18: [mem 0x90400000-0x907fffff 64bit]
    [ 0.130281] pci 0000:03:00.0: supports D1 D2
    [ 0.130283] pci 0000:03:00.0: PME# supported from D0 D1 D2
    [ 0.136688] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.136698] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.136792] pci 0000:04:00.0: [197b:2368] type 00 class 0x010185
    [ 0.136823] pci 0000:04:00.0: reg 10: [io 0x1018-0x101f]
    [ 0.136837] pci 0000:04:00.0: reg 14: [io 0x1024-0x1027]
    [ 0.136851] pci 0000:04:00.0: reg 18: [io 0x1010-0x1017]
    [ 0.136866] pci 0000:04:00.0: reg 1c: [io 0x1020-0x1023]
    [ 0.136880] pci 0000:04:00.0: reg 20: [io 0x1000-0x100f]
    [ 0.136906] pci 0000:04:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
    [ 0.137025] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.137035] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.137039] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.137098] pci 0000:05:03.0: [1814:0301] type 00 class 0x028000
    [ 0.137116] pci 0000:05:03.0: reg 10: [mem 0x90800000-0x90807fff]
    [ 0.137237] pci 0000:05:05.0: [11c1:5811] type 00 class 0x0c0010
    [ 0.137254] pci 0000:05:05.0: reg 10: [mem 0x90808000-0x90808fff]
    [ 0.137329] pci 0000:05:05.0: supports D1 D2
    [ 0.137331] pci 0000:05:05.0: PME# supported from D0 D1 D2 D3hot
    [ 0.137409] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
    [ 0.137415] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.137421] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.137423] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.137426] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.137428] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
    [ 0.137431] pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfeafffff] (subtractive decode)
    [ 0.137433] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xefffffff] (subtractive decode)
    [ 0.137455] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.137457] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.137544] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137616] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137685] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
    [ 0.137753] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137820] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.137887] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.137954] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12)
    [ 0.138021] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    [ 0.138507] ACPI: Enabled 4 GPEs in block 00 to 1F
    [ 0.138515] acpi root: \_SB_.PCI0 notify handler is installed
    [ 0.138552] Found 1 acpi root devices
    [ 0.138645] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.138645] vgaarb: loaded
    [ 0.138645] vgaarb: bridge control possible 0000:01:00.0
    [ 0.138645] PCI: Using ACPI for IRQ routing
    [ 0.141702] PCI: pci_cache_line_size set to 64 bytes
    [ 0.141771] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
    [ 0.141774] e820: reserve RAM buffer [mem 0x7ee70000-0x7fffffff]
    [ 0.141776] e820: reserve RAM buffer [mem 0x7fdf5000-0x7fffffff]
    [ 0.141778] e820: reserve RAM buffer [mem 0x7fe98000-0x7fffffff]
    [ 0.141780] e820: reserve RAM buffer [mem 0x7feec000-0x7fffffff]
    [ 0.141782] e820: reserve RAM buffer [mem 0x7fef2000-0x7fffffff]
    [ 0.141784] e820: reserve RAM buffer [mem 0x7ff00000-0x7fffffff]
    [ 0.141898] NetLabel: Initializing
    [ 0.141900] NetLabel: domain hash size = 128
    [ 0.141901] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.141917] NetLabel: unlabeled traffic allowed by default
    [ 0.141945] Switching to clocksource refined-jiffies
    [ 0.148603] pnp: PnP ACPI init
    [ 0.148630] ACPI: bus type PNP registered
    [ 0.148744] system 00:00: [mem 0xf0000000-0xf7ffffff] has been reserved
    [ 0.148747] system 00:00: [mem 0xfed13000-0xfed13fff] has been reserved
    [ 0.148750] system 00:00: [mem 0xfed14000-0xfed17fff] has been reserved
    [ 0.148753] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.148756] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.148758] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.148761] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.148764] system 00:00: [mem 0xfed45000-0xfed99fff] has been reserved
    [ 0.148767] system 00:00: [mem 0x000c0000-0x000dffff] could not be reserved
    [ 0.148769] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.148774] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.148919] pnp 00:01: [dma 4]
    [ 0.148948] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.148992] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.149031] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.149063] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.149126] system 00:05: [io 0x0500-0x053f] has been reserved
    [ 0.149129] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 0.149132] system 00:05: [io 0x0360-0x0361] has been reserved
    [ 0.149135] system 00:05: [io 0x0680-0x06ff] has been reserved
    [ 0.149139] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149220] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.149501] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.149573] pnp 00:08: Plug and Play ACPI device, IDs PNP0003 (active)
    [ 0.149624] pnp: PnP ACPI: found 9 devices
    [ 0.149626] ACPI: bus type PNP unregistered
    [ 0.156213] Switching to clocksource acpi_pm
    [ 0.156232] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
    [ 0.156236] pci 0000:04:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.156264] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.156267] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.156276] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    [ 0.156279] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
    [ 0.156288] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x001fffff pref] to [bus 04] add_size 200000
    [ 0.156291] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000
    [ 0.156304] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156307] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.156310] pci 0000:00:1c.2: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.156313] pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x001fffff pref] get_res_add_size add_size 200000
    [ 0.156315] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156318] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.156324] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156327] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156330] pci 0000:00:1c.2: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
    [ 0.156334] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf8600000-0xf88fffff pref]
    [ 0.156337] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.156340] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
    [ 0.156344] pci 0000:01:00.0: BAR 6: assigned [mem 0x90a40000-0x90a5ffff pref]
    [ 0.156348] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.156351] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
    [ 0.156355] pci 0000:00:01.0: bridge window [mem 0x90a00000-0x90afffff]
    [ 0.156358] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156363] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.156366] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
    [ 0.156371] pci 0000:00:1c.0: bridge window [mem 0x90900000-0x909fffff]
    [ 0.156375] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156381] pci 0000:00:1c.1: PCI bridge to [bus 03]
    [ 0.156384] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
    [ 0.156389] pci 0000:00:1c.1: bridge window [mem 0x90000000-0x907fffff]
    [ 0.156393] pci 0000:00:1c.1: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156400] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8600000-0xf860ffff pref]
    [ 0.156402] pci 0000:00:1c.2: PCI bridge to [bus 04]
    [ 0.156405] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.156410] pci 0000:00:1c.2: bridge window [mem 0xf8400000-0xf85fffff]
    [ 0.156414] pci 0000:00:1c.2: bridge window [mem 0xf8600000-0xf88fffff pref]
    [ 0.156421] pci 0000:00:1e.0: PCI bridge to [bus 05]
    [ 0.156425] pci 0000:00:1e.0: bridge window [mem 0x90800000-0x908fffff]
    [ 0.156425] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.156425] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:00: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:00: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:00: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
    [ 0.156425] pci_bus 0000:01: resource 1 [mem 0x90a00000-0x90afffff]
    [ 0.156425] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref]
    [ 0.156425] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.156425] pci_bus 0000:02: resource 1 [mem 0x90900000-0x909fffff]
    [ 0.156425] pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf81fffff 64bit pref]
    [ 0.156425] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
    [ 0.156425] pci_bus 0000:03: resource 1 [mem 0x90000000-0x907fffff]
    [ 0.156425] pci_bus 0000:03: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
    [ 0.156425] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.156425] pci_bus 0000:04: resource 1 [mem 0xf8400000-0xf85fffff]
    [ 0.156425] pci_bus 0000:04: resource 2 [mem 0xf8600000-0xf88fffff pref]
    [ 0.156425] pci_bus 0000:05: resource 1 [mem 0x90800000-0x908fffff]
    [ 0.156425] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.156425] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.156425] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.156425] pci_bus 0000:05: resource 7 [mem 0x000e0000-0x000effff]
    [ 0.156425] pci_bus 0000:05: resource 8 [mem 0xf8000000-0xfeafffff]
    [ 0.156425] pci_bus 0000:05: resource 9 [mem 0x80000000-0xefffffff]
    [ 0.156425] NET: Registered protocol family 2
    [ 0.156425] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.156425] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.156425] TCP: reno registered
    [ 0.156425] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.156425] NET: Registered protocol family 1
    [ 0.156791] pci 0000:01:00.0: Boot video device
    [ 0.156891] PCI: CLS 64 bytes, default 64
    [ 0.156941] Unpacking initramfs...
    [ 0.310182] Freeing initrd memory: 6996k freed
    [ 0.313496] Scanning for low memory corruption every 60 seconds
    [ 0.313787] audit: initializing netlink socket (disabled)
    [ 0.313804] type=2000 audit(1375824849.313:1): initialized
    [ 0.326819] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.328674] VFS: Disk quotas dquot_6.5.2
    [ 0.328731] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.328948] msgmni has been set to 4003
    [ 0.329231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.329273] io scheduler noop registered
    [ 0.329276] io scheduler deadline registered
    [ 0.329310] io scheduler cfq registered (default)
    [ 0.329439] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.329503] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.329571] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
    [ 0.329644] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
    [ 0.329814] intel_idle: does not run on family 6 model 15
    [ 0.329849] GHES: HEST is not enabled!
    [ 0.329917] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.350447] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.350819] Linux agpgart interface v0.103
    [ 0.350895] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.353919] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.353952] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.354077] mousedev: PS/2 mouse device common for all mice
    [ 0.354143] rtc_cmos 00:02: RTC can wake from S4
    [ 0.354275] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 0.354297] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram
    [ 0.354307] cpuidle: using governor ladder
    [ 0.354309] cpuidle: using governor menu
    [ 0.354362] drop_monitor: Initializing network drop monitor service
    [ 0.354438] TCP: cubic registered
    [ 0.354554] NET: Registered protocol family 10
    [ 0.354764] NET: Registered protocol family 17
    [ 0.354780] Key type dns_resolver registered
    [ 0.355037] PM: Checking hibernation image partition /dev/system/swap
    [ 0.397240] PM: Hibernation image not present or could not be loaded.
    [ 0.397253] registered taskstats version 1
    [ 0.397804] Magic number: 9:719:600
    [ 0.397885] rtc_cmos 00:02: setting system clock to 2013-08-06 21:34:10 UTC (1375824850)
    [ 0.398920] Freeing unused kernel memory: 1124k freed
    [ 0.399295] Write protecting the kernel read-only data: 8192k
    [ 0.402578] Freeing unused kernel memory: 1212k freed
    [ 0.404163] Freeing unused kernel memory: 408k freed
    [ 0.412320] systemd-udevd[45]: starting version 204
    [ 0.417813] [drm] Initialized drm 1.1.0 20060810
    [ 0.423117] [drm] radeon kernel modesetting enabled.
    [ 0.423539] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x174B:0xE180).
    [ 0.423580] [drm] register mmio base: 0x90A00000
    [ 0.423582] [drm] register mmio size: 131072
    [ 0.424493] ATOM BIOS: CAICOS
    [ 0.424939] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 0.424942] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
    [ 0.425844] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 0.425848] [drm] RAM width 64bits DDR
    [ 0.425929] [TTM] Zone kernel: Available graphics memory: 1026308 kiB
    [ 0.425931] [TTM] Initializing pool allocator
    [ 0.425937] [TTM] Initializing DMA pool allocator
    [ 0.425964] [drm] radeon: 512M of VRAM memory ready
    [ 0.425966] [drm] radeon: 512M of GTT memory ready.
    [ 0.426256] radeon 0000:01:00.0: ffff88007e85a800 unpin not necessary
    [ 0.881477] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90008be6118
    [ 0.881489] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 0.882702] [drm] Loading CAICOS Microcode
    [ 0.901197] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
    [ 0.901323] radeon 0000:01:00.0: WB enabled
    [ 0.901327] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff880079fd2c00
    [ 0.901330] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff880079fd2c0c
    [ 0.903890] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000174118 and cpu addr 0xffffc90009432118
    [ 0.903895] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 0.903897] [drm] Driver supports precise vblank timestamp query.
    [ 0.903924] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 0.903940] radeon 0000:01:00.0: radeon: using MSI.
    [ 0.903977] [drm] radeon: irq initialized.
    [ 0.920415] [drm] ring test on 0 succeeded in 2 usecs
    [ 0.920480] [drm] ring test on 3 succeeded in 1 usecs
    [ 1.106683] [drm] ring test on 5 succeeded in 2 usecs
    [ 1.106688] [drm] UVD initialized successfully.
    [ 1.106780] [drm] Enabling audio support
    [ 1.106827] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 1.106873] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 1.259354] [drm] ib test on ring 5 succeeded
    [ 1.259721] [drm] Radeon Display Connectors
    [ 1.259723] [drm] Connector 0:
    [ 1.259725] [drm] HDMI-A-1
    [ 1.259726] [drm] HPD2
    [ 1.259729] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
    [ 1.259730] [drm] Encoders:
    [ 1.259732] [drm] DFP1: INTERNAL_UNIPHY1
    [ 1.259733] [drm] Connector 1:
    [ 1.259734] [drm] VGA-1
    [ 1.259736] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
    [ 1.259738] [drm] Encoders:
    [ 1.259739] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.259818] [drm] Internal thermal controller with fan control
    [ 1.260722] [drm] radeon: power management initialized
    [ 1.313356] tsc: Refined TSC clocksource calibration: 2188.999 MHz
    [ 1.313363] Switching to clocksource tsc
    [ 1.331618] [drm] fb mappable at 0x80375000
    [ 1.331620] [drm] vram apper at 0x80000000
    [ 1.331622] [drm] size 8294400
    [ 1.331623] [drm] fb depth is 24
    [ 1.331625] [drm] pitch is 7680
    [ 1.331702] fbcon: radeondrmfb (fb0) is primary device
    [ 1.544648] Console: switching to colour frame buffer device 240x67
    [ 1.550480] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.550482] radeon 0000:01:00.0: registered panic notifier
    [ 1.550488] [drm] Initialized radeon 2.33.0 20080528 for 0000:01:00.0 on minor 0
    [ 1.551576] device-mapper: uevent: version 1.0.3
    [ 1.551788] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected]
    [ 1.584940] SCSI subsystem initialized
    [ 1.587002] ACPI: bus type ATA registered
    [ 1.587124] ACPI: bus type USB registered
    [ 1.587165] usbcore: registered new interface driver usbfs
    [ 1.587199] libata version 3.00 loaded.
    [ 1.587772] ata_piix 0000:00:1f.2: version 2.13
    [ 1.587914] ata_piix 0000:00:1f.2: MAP [
    [ 1.587916] P0 P2 P1 P3 ]
    [ 1.590067] usbcore: registered new interface driver hub
    [ 1.590515] usbcore: registered new device driver usb
    [ 1.591219] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.591393] ehci-pci: EHCI PCI platform driver
    [ 1.592276] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592288] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
    [ 1.592501] xhci_hcd 0000:02:00.0: irq 45 for MSI/MSI-X
    [ 1.592673] xHCI xhci_add_endpoint called for root hub
    [ 1.592675] xHCI xhci_check_bandwidth called for root hub
    [ 1.592706] hub 1-0:1.0: USB hub found
    [ 1.592713] hub 1-0:1.0: 1 port detected
    [ 1.592813] xhci_hcd 0000:02:00.0: xHCI Host Controller
    [ 1.592819] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
    [ 1.592917] xHCI xhci_add_endpoint called for root hub
    [ 1.592919] xHCI xhci_check_bandwidth called for root hub
    [ 1.592948] hub 2-0:1.0: USB hub found
    [ 1.592957] hub 2-0:1.0: 4 ports detected
    [ 1.593131] scsi0 : pata_jmicron
    [ 1.593158] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.593424] scsi1 : pata_jmicron
    [ 1.593609] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18
    [ 1.593612] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18
    [ 1.596715] firewire_ohci 0000:05:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x80
    [ 1.740079] ata_piix 0000:00:1f.2: setting latency timer to 64
    [ 1.740483] scsi2 : ata_piix
    [ 1.740779] scsi3 : ata_piix
    [ 1.741044] ata3: SATA max UDMA/133 cmd 0x3438 ctl 0x344c bmdma 0x3410 irq 19
    [ 1.741049] ata4: SATA max UDMA/133 cmd 0x3430 ctl 0x3448 bmdma 0x3418 irq 19
    [ 1.741248] ata_piix 0000:00:1f.5: MAP [
    [ 1.741250] P0 -- P1 -- ]
    [ 1.741284] ata_piix 0000:00:1f.5: setting latency timer to 64
    [ 1.741526] scsi4 : ata_piix
    [ 1.741784] scsi5 : ata_piix
    [ 1.742032] ata5: SATA max UDMA/133 cmd 0x3428 ctl 0x3444 bmdma 0x30f0 irq 19
    [ 1.742036] ata6: SATA max UDMA/133 cmd 0x3420 ctl 0x3440 bmdma 0x30f8 irq 19
    [ 1.742228] ehci-pci 0000:00:1a.7: setting latency timer to 64
    [ 1.742244] ehci-pci 0000:00:1a.7: EHCI Host Controller
    [ 1.742252] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
    [ 1.742266] ehci-pci 0000:00:1a.7: debug port 1
    [ 1.746161] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.746168] ehci-pci 0000:00:1a.7: irq 18, io mem 0x90b25400
    [ 1.753360] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.753568] hub 3-0:1.0: USB hub found
    [ 1.753573] hub 3-0:1.0: 4 ports detected
    [ 1.753841] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.753845] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.753852] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 4
    [ 1.753886] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
    [ 1.754034] hub 4-0:1.0: USB hub found
    [ 1.754039] hub 4-0:1.0: 2 ports detected
    [ 1.754278] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.754282] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.754288] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 5
    [ 1.754321] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080
    [ 1.754470] hub 5-0:1.0: USB hub found
    [ 1.754475] hub 5-0:1.0: 2 ports detected
    [ 1.754707] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.754711] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.754717] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.754748] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060
    [ 1.754886] hub 6-0:1.0: USB hub found
    [ 1.754890] hub 6-0:1.0: 2 ports detected
    [ 1.755113] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.755117] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.755123] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.755146] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040
    [ 1.755279] hub 7-0:1.0: USB hub found
    [ 1.755284] hub 7-0:1.0: 2 ports detected
    [ 1.755501] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.755505] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.755511] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.755533] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020
    [ 1.755672] hub 8-0:1.0: USB hub found
    [ 1.755677] hub 8-0:1.0: 2 ports detected
    [ 1.756794] ehci-pci 0000:00:1d.7: setting latency timer to 64
    [ 1.757624] ehci-pci 0000:00:1d.7: EHCI Host Controller
    [ 1.757636] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 9
    [ 1.757651] ehci-pci 0000:00:1d.7: debug port 1
    [ 1.761541] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.761550] ehci-pci 0000:00:1d.7: irq 23, io mem 0x90b25000
    [ 1.770027] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.770236] hub 9-0:1.0: USB hub found
    [ 1.770242] hub 9-0:1.0: 6 ports detected
    [ 1.793425] hub 6-0:1.0: USB hub found
    [ 1.793434] hub 6-0:1.0: 2 ports detected
    [ 1.816762] hub 7-0:1.0: USB hub found
    [ 1.816772] hub 7-0:1.0: 2 ports detected
    [ 1.840122] hub 8-0:1.0: USB hub found
    [ 1.840131] hub 8-0:1.0: 2 ports detected
    [ 1.896698] usb 1-1: new high-speed USB device number 2 using xhci_hcd
    [ 1.911468] hub 1-1:1.0: USB hub found
    [ 1.911627] hub 1-1:1.0: 4 ports detected
    [ 2.064043] ata6: SATA link down (SStatus 0 SControl 300)
    [ 2.074751] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.096814] firewire_core 0000:05:05.0: created device fw0: GUID 009027000228f4cc, S400
    [ 2.520099] ata4.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.520116] ata4.01: SATA link down (SStatus 4 SControl 300)
    [ 2.520129] ata4.01: link offline, clearing class 3 to NONE
    [ 2.526834] ata4.00: ATAPI: HL-DT-ST BDDVDRW UH12NS30, 1.00, max UDMA/100
    [ 2.540115] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.540132] ata3.01: SATA link down (SStatus 4 SControl 300)
    [ 2.540234] ata4.00: configured for UDMA/100
    [ 2.547003] ata3.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
    [ 2.547008] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 2.560344] ata3.00: configured for UDMA/133
    [ 2.560526] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
    [ 2.562299] scsi 3:0:0:0: CD-ROM HL-DT-ST BDDVDRW UH12NS30 1.00 PQ: 0 ANSI: 5
    [ 2.565388] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
    [ 2.565443] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.565446] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.565469] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.569249] sr0: scsi3-mmc drive: 1x/1x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.569254] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.569537] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.582466] sda: sda1 sda2
    [ 2.582770] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.763375] usb 6-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.186725] usb 7-1: new full-speed USB device number 2 using uhci_hcd
    [ 3.373997] hidraw: raw HID events driver (C) Jiri Kosina
    [ 3.384911] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
    [ 3.384942] usbcore: registered new interface driver usbhid
    [ 3.384944] usbhid: USB HID core driver
    [ 3.389375] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.2/0003:046D:C52B.0003/input/input0
    [ 3.389518] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:1d.1-1:1
    [ 3.956744] usb 8-1: new low-speed USB device number 2 using uhci_hcd
    [ 4.193021] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
    [ 4.193111] hid-generic 0003:05A4:9881.0005: input,hidraw2: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1d.2-1/input0
    [ 4.323187] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
    [ 4.323310] hid-generic 0003:05A4:9881.0006: input,hidraw3: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1d.2-1/input1
    [ 11.876733] bio: create slab <bio-1> at 1
    [ 12.881119] bio: create slab <bio-1> at 1
    [ 13.707370] PM: Starting manual resume from disk
    [ 13.707375] PM: Hibernation image partition 254:2 present
    [ 13.707377] PM: Looking for hibernation image.
    [ 13.707685] PM: Image not found (code -22)
    [ 13.707689] PM: Hibernation image not present or could not be loaded.
    [ 14.046090] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 14.787445] systemd[1]: systemd 204 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
    [ 14.788676] systemd[1]: Set hostname to <HTPC-Arch>.
    [ 15.226797] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 15.226858] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 15.226873] systemd[1]: Starting Remote File Systems.
    [ 15.227011] systemd[1]: Reached target Remote File Systems.
    [ 15.227023] systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
    [ 15.227118] systemd[1]: Starting Delayed Shutdown Socket.
    [ 15.227240] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 15.227251] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 15.227365] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 15.227375] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 15.227491] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 15.227501] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 15.227623] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 15.227662] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 15.227875] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 15.227893] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 15.227935] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 15.227945] systemd[1]: Starting Paths.
    [ 15.228037] systemd[1]: Reached target Paths.
    [ 15.228050] systemd[1]: Starting Journal Socket.
    [ 15.228187] systemd[1]: Listening on Journal Socket.
    [ 15.249416] systemd[1]: Started Set Up Additional Binary Formats.
    [ 15.262084] systemd[1]: Starting Apply Kernel Variables...
    [ 15.262799] systemd[1]: Starting Create static device nodes in /dev...
    [ 15.263427] systemd[1]: Mounting Huge Pages File System...
    [ 15.263983] systemd[1]: Starting Setup Virtual Console...
    [ 15.264564] systemd[1]: Mounting POSIX Message Queue File System...
    [ 15.265156] systemd[1]: Mounting Debug File System...
    [ 15.280316] systemd[1]: Started Load Kernel Modules.
    [ 15.280348] systemd[1]: Mounting Configuration File System...
    [ 15.280921] systemd[1]: Mounted FUSE Control File System.
    [ 15.280939] systemd[1]: Starting Journal Service...
    [ 15.281676] systemd[1]: Started Journal Service.
    [ 15.281761] systemd[1]: Starting udev Kernel Socket.
    [ 15.281891] systemd[1]: Listening on udev Kernel Socket.
    [ 15.281945] systemd[1]: Starting udev Control Socket.
    [ 15.282059] systemd[1]: Listening on udev Control Socket.
    [ 15.282117] systemd[1]: Starting udev Coldplug all Devices...
    [ 15.282675] systemd[1]: Starting Encrypted Volumes.
    [ 15.282783] systemd[1]: Reached target Encrypted Volumes.
    [ 15.282802] systemd[1]: Expecting device dev-disk-by\x2duuid-0318dc88\x2d9059\x2d4a62\x2dbcff\x2d33265de192a4.device...
    [ 15.282920] systemd[1]: Started File System Check on Root Device.
    [ 15.282933] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 15.283591] systemd[1]: Mounting Temporary Directory...
    [ 15.420998] systemd[1]: Expecting device dev-disk-by\x2duuid-53882be2\x2d6e5d\x2d4f81\x2d8336\x2d8115b139229a.device...
    [ 15.422283] systemd[1]: Expecting device dev-disk-by\x2duuid-a510d99d\x2dd043\x2d415c\x2d9357\x2d87584ac75ce0.device...
    [ 15.753587] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 15.847848] systemd-udevd[185]: starting version 204
    [ 16.644359] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 16.644369] ACPI: Sleep Button [SLPB]
    [ 16.644450] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 16.644454] ACPI: Power Button [PWRF]
    [ 16.751410] pps_core: LinuxPPS API ver. 1 registered
    [ 16.751415] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
    [ 16.808340] media: Linux media interface: v0.10
    [ 16.812148] Linux video capture interface: v2.00
    [ 16.820027] PTP clock support registered
    [ 16.833228] ACPI: Requesting acpi_cpufreq
    [ 16.874833] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
    [ 16.874837] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
    [ 16.875034] e1000e 0000:00:19.0: setting latency timer to 64
    [ 16.875118] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
    [ 16.875143] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 16.914814] saa7164 driver loaded
    [ 16.916507] CORE saa7164[0]: subsystem: 0070:8851, board: Hauppauge WinTV-HVR2250 [card=7,autodetected]
    [ 16.916513] saa7164[0]/0: found at 0000:03:00.0, rev: 129, irq: 17, latency: 0, mmio: 0x90000000
    [ 17.050022] saa7164_downloadfirmware() no first image
    [ 17.050682] cfg80211: Calling CRDA to update world regulatory domain
    [ 17.051569] saa7164_downloadfirmware() Waiting for firmware upload (NXP7164-2010-03-10.1.fw)
    [ 17.187584] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:78:69:22
    [ 17.187590] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
    [ 17.187615] e1000e 0000:00:19.0 eth0: MAC: 6, PHY: 6, PBA No: FFFFFF-0FF
    [ 17.187944] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GPE0 1 (20130328/utaddress-251)
    [ 17.187951] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 17.187976] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 17.448874] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c
    [ 17.481174] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
    [ 17.580464] saa7164_downloadfirmware() firmware read 4019072 bytes.
    [ 17.580469] saa7164_downloadfirmware() firmware loaded.
    [ 17.580471] Firmware file header part 1:
    [ 17.580473] .FirmwareSize = 0x0
    [ 17.580474] .BSLSize = 0x0
    [ 17.580475] .Reserved = 0x3d538
    [ 17.580477] .Version = 0x3
    [ 17.580479] saa7164_downloadfirmware() SecBootLoader.FileSize = 4019072
    [ 17.580485] saa7164_downloadfirmware() FirmwareSize = 0x1fd6
    [ 17.580486] saa7164_downloadfirmware() BSLSize = 0x0
    [ 17.580488] saa7164_downloadfirmware() Reserved = 0x0
    [ 17.580489] saa7164_downloadfirmware() Version = 0x1661c00
    [ 17.621991] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
    [ 17.694365] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
    [ 17.694422] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
    [ 17.694477] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
    [ 17.694908] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 17.694980] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
    [ 17.707929] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
    [ 17.907140] microcode: CPU0 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907184] microcode: CPU1 sig=0x6fd, pf=0x1, revision=0xa3
    [ 17.907251] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 17.993729] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
    [ 18.040563] coretemp coretemp.0: Using relative temperature scale!
    [ 18.040576] coretemp coretemp.0: Using relative temperature scale!
    [ 18.100383] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [ 18.112063] iTCO_vendor_support: vendor-support=0
    [ 18.298748] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 18.298795] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
    [ 18.298917] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 18.520198] systemd-udevd[206]: renamed network interface wlan0 to wlp5s3
    [ 18.624855] Adding 10485756k swap on /dev/mapper/system-swap. Priority:-1 extents:1 across:10485756k FS
    [ 18.730190] systemd-udevd[200]: renamed network interface eth0 to enp0s25
    [ 20.673933] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 20.681617] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 20.855405] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 21.795385] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896764] e1000e 0000:00:19.0: irq 46 for MSI/MSI-X
    [ 21.896898] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
    [ 22.415792] systemd-logind[284]: Watching system buttons on /dev/input/event4 (Power Button)
    [ 22.415885] systemd-logind[284]: Watching system buttons on /dev/input/event3 (Sleep Button)
    [ 22.618057] input: Xbox Gamepad (userspace driver) as /devices/virtual/input/input9
    [ 22.619178] input: Xbox Gamepad (userspace driver) #2 as /devices/virtual/input/input10
    [ 24.390026] saa7164_downloadimage() Image downloaded, booting...
    [ 24.493363] saa7164_downloadimage() Image booted successfully.
    [ 24.493397] starting firmware download(2)
    [ 26.916146] systemd-logind[284]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
    [ 27.103368] saa7164_downloadimage() Image downloaded, booting...
    [ 29.170040] saa7164_downloadimage() Image booted successfully.
    [ 29.170074] firmware download complete.
    [ 29.217377] tveeprom 9-0000: Hauppauge model 88061, rev C4F2, serial# 8524019
    [ 29.217381] tveeprom 9-0000: MAC address is 00:0d:fe:82:10:f3
    [ 29.217383] tveeprom 9-0000: tuner model is NXP 18271C2_716x (idx 152, type 4)
    [ 29.217386] tveeprom 9-0000: TV standards NTSC(M) ATSC/DVB Digital (eeprom 0x88)
    [ 29.217388] tveeprom 9-0000: audio processor is SAA7164 (idx 43)
    [ 29.217390] tveeprom 9-0000: decoder processor is SAA7164 (idx 40)
    [ 29.217392] tveeprom 9-0000: has radio, has IR receiver, has no IR transmitter
    [ 29.217394] saa7164[0]: Hauppauge eeprom: model=88061
    [ 29.865010] tda18271 10-0060: creating new instance
    [ 29.869343] TDA18271HD/C2 detected @ 10-0060
    [ 30.094538] DVB: registering new adapter (saa7164)
    [ 30.094548] saa7164 0000:03:00.0: DVB: registering adapter 0 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 30.383509] tda18271 11-0060: creating new instance
    [ 30.387943] TDA18271HD/C2 detected @ 11-0060
    [ 30.457571] e1000e: enp0s25 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
    [ 30.457682] e1000e 0000:00:19.0 enp0s25: Link Speed was downgraded by SmartSpeed
    [ 30.457685] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO
    [ 30.457715] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
    [ 30.612017] tda18271: performing RF tracking filter calibration
    [ 32.898604] tda18271: RF tracking filter calibration complete
    [ 32.901771] DVB: registering new adapter (saa7164)
    [ 32.901779] saa7164 0000:03:00.0: DVB: registering adapter 1 frontend 0 (Samsung S5H1411 QAM/8VSB Frontend)...
    [ 32.902195] saa7164[0]: registered device video0 [mpeg]
    [ 33.133183] saa7164[0]: registered device video1 [mpeg]
    [ 33.343857] saa7164[0]: registered device vbi0 [vbi]
    [ 33.343959] saa7164[0]: registered device vbi1 [vbi]
    [ 37.832133] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
    [ 38.787420] EXT4-fs (dm-1): re-mounted. Opts: data=ordered,commit=0
    [ 39.333649] EXT4-fs (dm-3): re-mounted.

    I seemed to have solved this by following the advice in the Gentoo wiki:
    https://wiki.gentoo.org/wiki/Radeon#Audio_over_HDMI
    pcm.!default {
    type plug
    slave.pcm "hdmi"
    Those four lines in my /etc/asound.conf work. I'm not sure what the difference is between specifying "hdmi" vs the hardware device "hw:0,3".
    I still get no sound with `aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav` however, `aplay /usr/share/sounds/alsa/Front_Center.wav` works now. `aplay -D hdmi /usr/share/sounds/alsa/Front_Center.wav` results in an error/warning:
    Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
    aplay: set_params:1239: Channels count non available

Maybe you are looking for

  • Oracle 10g Rel 2  - Proxy connection authentication with SAP User ID

    Dear Experts, We are currently doing some research and planning to upgrade SAP R/3 4.6C to ECC 6 and upgrading Oracle from version 9.2 to 10.2 In upgrading to Oracle vers. 10g Rel 2, we got advised that Oracle has apparently introduced a new proxy co

  • Oracle API for sale rep update

    Hi , I want to update sales rep information by using the API -HZ_CUST_ACCOUNT_SITE_V2PUb.update_cust_site_use. I have four fields which i want to update through the form..please help me in writing the syntax to achieve this.I want to write this synta

  • Mac Pro Install disc for a Macbook Pro?

    Hi everyone, Just wondering if theoretically it would be possible to use the install discs for Leopard on a new Macbook Pro. Meaning that the disc says 'MAC PRO: Mac OS X ...." but would they still work alright on a late 2009 Macbook Pro? Thanks guys

  • Can't access itunes music on Apple TV anymore

    I used to have access to itunes music in my apple TV, but the menu's are gonr now, although stil there for TV shows and movies.

  • When the new iWork version be available?

    I have all my software up today with the exeption of iWork, mine is iWork '08. Have any sence buy '09 to access all the "new features" (iCloud, full screen mode, etc.) anyone knows if Apple plans to introduce something new (due the fact that the soft