Why is HP C4280 all in 0ne not working with Mac OS X Mavericks
After upgrading my Mac to OS X 10-9-2 Maverick , The HP C4280 All In one , will not scam properly , ck with HP the syst was scan and as told that
the Mac was not working or had issues with the operating syst.
See How to Scan with HP and Mavericks.
Similar Messages
-
Any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station pls
any ideas why my ipod nano 6th gen is not working with Sony SRSGU10IP docking station please ? classic working fine, so not the fault of the station itself ? it's been bought as a present for my father & he's confused !
Check the headphone jack with a flashlight and clean it if necessary. The jack on a new Nano is very tight, be sure you push the headset jack all the way in, the plastic on the headset jack should be flush with the body of the Nano.
-
Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5
Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks
What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP. -
Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?
You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html
-
In context not working with Mac Safari 6.04
Hi there just noticed
in context not working with Mac Safari 6.04, you can edit text, and save and publish but editable marquees are no longer visible especially the repeating elements?Hi Vicki,
I would suggest submitting a support case on this for further investigation.
Unfortunately I'm on a PC machine so I cannot confirm on my end. Please reach out to direct support ASAP if the issue is still existing.
- http://helpx.adobe.com/contact.html
Kind regards,
-Sidney -
Lost ical and the ical 1.5.5 is not working with mac osx 10.5 ?
lost ical, would like to download it, as in the installation disk, I'vent the possibility to do it . The problem is that the ical 1.5.5 is not working with mac osx 10.5 ?
biomecasport,
Welcome to Apple Discussions.
1. Insert the Leopard Installation disk into the computer.
2. The disk will appear on the desktop.
3. Double click on the "Optional Installs" folder.
4. Double click on the "Optional Installs.mpkg."
5. Click on (Continue) in Introduction.
6. Click on (Continue) in Software License Agreement.
7. Click on (Agree) to agree to the terms of the software license agreement.
8. Click on the disclosure arrow ▶ next to Applications.
9. Select (✓) iCal.
10. Click (Continue).
11. After iCal has been reinstalled, download and install the Mac OS X 10.5.8 Combo Update to bring iCal up to the most recent version. -
USB superdrive not working with Mac Pro
Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176 -
HP Envy 5530 e-all-in-one Does Not Work With Mac
Just bought an HP Envy 5530 all-in-one. It does not print through Safari and possibly other Mac applications. Does not frame the page properly even with "print page" and prints slower than 1 page per minute, even with no background images. My old HP had no problem with Safari. Phone support tells me there is no driver or fix. So I will return the device. Seems crazy. I now see othr commenters saying it doesn't work with Mac. If HP's no longer works with major Mac applications, they will be returned in droves. Anyone know why or know of a fix?
I am having the same issue. Did you ever find a solution?
-
What multifunction (all-in-one) BW laserjet printers work with Mac OS 10.9 and 10.8? - Printing, scanning and faxing!
I had a HP3052 whith a scaner message error 5 which can't print anymore. Anyway scanning with this HP is not supported anymore. So looking into the huge HP compatibility list on the web I see no good choice:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDi splay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTo k=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsr p-navigationalState%3DdocId%253Demr_na-c03800910-1%257CdocLocale%253Den_US&javax .portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=25475&ac.admitted=13914 44156214.876444892.492883150
The new HP LaserJet M127fn MFP duplex is not even on this list...
I prefer laser than ink printers (I hate buying cartridges every month or have the system stuck with dry ink when not used for a month).
There are some good brother laserprinters, e.g. MFC7860DW, but PC-Fax doesn't work on Mac (I believe).
Thanks to anybody with some good ideas.Thanks baltwo, but I am looking for a printer-copier-scanner-fax machine. I think I might go with the brother
http://www.brother-usa.com/MFC/ModelDetail/4/MFC7860DW/Overview#.UvAHCf1LrfM
mainly because more and more people seem to have bad experiences with HP printers in the $150-$300 range and manufactured in recent years;
and forget about faxing... -
HP Scan 3 software not working with MacOS 10.9 Mavericks
I just bought a new iMac to replace my old iMac and updated toe mew Mac to 10.9 Mavwericks. Now my HP Scan 3 software does not work and there is no update for this software that I can find. Can anyone help getting updated HP scanning software to use with Mavericks. Thank you.
Thanks for your reply. I tried what you suggestsed and it did not work. My printer was listed. The website says it is for MacOS 10.8 and Mavericks is 10.9. My printer prints fine. The problem is with the HP Scan 3 software. When I try to use it I get a dialog box that says check withn the developer as it does not work with my OS. Also, I went to the firm ware updater in my HP utilities folder and trie to run that. I got a message saying that there is no update for my device.
It is hard to believe that HP has not updated the scan software to work with Mavericks. -
USB Mouse not work with Mac OS 10.6
I have a USB mouse can work with Mac OS 10.4 but cannot with Mac OS 10.6. Noticed the different is the USB mouse motion reporting is 12-bit instead of 8-bit. It can definitely work on Windows with standard USB HID driver. I wonder if the OS 10.6 is having a different USB HID driver specification which is not posted in USB-IF.
Ask the Vendor.
-
My canon EOS DIGITAL ver 24.0 in not working with mac pro os x
MY CANON EOS DIGITAL SOFTWARE VER 24.0 IS NOT WORKING WITH THIS VERSION OF MAC OS X
Atiya wrote:
I have a Mac Pro (2 x 2.4 GHz Quad-Core, model identifier MacPro5,1) purchased in late 2010 and a 24" LED Cinema Display. The Mac Pro has three video ports--a full-sized DVI and two mini DVI. When I plug the Cinema Display into either of the mini DVI ports, I cannot get a picture, although the iSight camera works fine. If I plug another monitor into the full-sized DVI port the computer believes that is the only monitor. The Cinema Display works fine with my MacBook, so there is nothing physically wrong with it.
Is it not possible to use this monitor with a Mac Pro without an adapter, even though the Mac Pro does have mini DVI ports?
I use a 24" LED with my Mac Pro. Works a treat!
Does this help you? http://support.apple.com/kb/TS2400
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.6); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.6)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1 -
My banking website ask me to install latest IE . but IE8/9 does not work with mac
My banking website ask me to install latest IE . but IE8/9 does not work with mac
You should contact your bank to see what browsers they support and until then ignore the message. The chances are very good they suppport Safari and Firefox, both are great browers.
Roger -
I have bought second hand iPhone 5 Hong kong model A1429 and it works with all gsm carriers can i use cdma sim in it?
i have iOS 8.1 and i searched through internet and i found that A1429 model supports worldwide GSM and CDMA networks but actually it can not.That model iPhone should support LTE on Deutsche Telekom. What carrier are you trying to use it with?
-
Is it possible to create an msi package if the product you are upgrading is Multilingual (MUI) and the update(msp) you are applying is not Multilingual (MUI) but "All languages"?
Please download the latest Adobe Reader patch from the below mentioned location, it will work with MUI installer.
ftp://ftp.adobe.com/pub/adobe/reader/
~Deepak
Maybe you are looking for
-
How to create Header and Footer template
Hi, I am wondering if this is possible, if yes , can some help me please? At present we have preprinted stationary for invoices and now the plan is to get rid of preprinted stationary and print header and footer via oracle reports directly. The addre
-
Adobe form created in LiveCycle does not remember user input
Adobe form created in LiveCycle does not remember user input when the file has been re-opened after it has been saved. Example: "Check box" that has been selected and who have registered Action script (may be that it should be disabled), seems to be
-
Po not updating in data source
Dear sir, Issue I created a Purchase order for an article to a site.It is required to update in a Data source .But it is not updating . Please help me. Anlysis I tried after doing Goods receipt too, but it is not working. I need it to update it becau
-
The i movie progressbar is stuck in one place for more than an hour
and under the bar written "building project" will i be able to access my projects again if I will force the program to quit?? (The last thing i did before it started to load was to mark the clips from one project and than i swiped to another project
-
Setting property for context value attributes
hi experts, created a value attribute[XYZ] in context and i want to set that value attribute type as com.sap.tc.webdynpro.services.session.api.IWDWindow From properties am not finding the above path. please provide the valuable information.