Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger or card reader?

Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger print or card reader?
It keeps popping up and asking me to use it?
Can it be used to keep my passwords?
What Version of SimplePass are you using? Unknown, apparently you have to use it to find the version number.
What is your Operating System? Windows 7 32 or 64bit? or? Windows 8.1 64 Bit
Which browser are you using? Internet explorer version 11, and Fire fox version 34.0
Can you give me a example of a Website that is giving you this problem? Have not used it yet.
Is is every webcard or just one or two websites that have this problem? Have not used it yet
What is your computer product number? (NOT serial number?) HP 15-f039wm Notebook PC
Thanks for any help you can offer.

Hi,
You could check the blog below.
How to Enable Group Policy Debugging on Windows 7 / 8 Clients
http://clintboessen.blogspot.jp/2014/01/how-to-enable-group-policy-debugging-on.html
Note: Microsoft provides third-party contact information to help you find technical support. This contact
information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
If you have any questions about Group Policy, you could get better support from Group Policy forum.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverGP
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

A webpage suddenly stops loading and just shows 'connecting...'. Opening new webpages in new tabs in the same window or in a new window gives same problem, while IE does not have any such problem opening the same page simultaneously

this issue is not limited to one website, it seems to be problem with the browser or possibly any plugins but not any specific webpage

The default of the pref network.http.max-connections has been increased from 30 to 256 in Firefox 6+ versions.
Try to decrease the value of the pref <b>network.http.max-connections</b> from 255 to a setting like 30 as used in Firefox 3 versions.
*https://support.mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

Why does Firefox Sync say my recovery key has been changed when I do not have another device to change it?

I am trying to perform my first sync, but the progress bar on the tab that opens up does not move. I've left it overnight and still no change. When I click sync now, a message appears stating that I am using the Wrong Recovery Key. I've tried using the same key, and generating a new one several times with no success.

Hi,
You can type '''about:sync-log''' in the location (address) bar to check the helpful messages. You can also try [https://account.services.mozilla.com/ deleting the current account] and start afresh.
Please also see [https://support.mozilla.org/en-US/kb/how-do-i-set-up-firefox-sync this detailed (three steps) setup help].
[https://support.mozilla.org/en-US/kb/firefox-sync-take-your-bookmarks-and-tabs-with-you?redirectlocale=en-US&redirectslug=what-firefox-sync Firefox Sync]
[https://support.mozilla.org/en-US/kb/what-firefox-sync-and-how-do-i-use-it Sync QA]

Why does Firefox give this message when I do not have another program running "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system."

Question
why does Firefox give this message when I do not have another program running or another window open - "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." edit

See also "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
*https://support.mozilla.com/kb/Firefox+hangs

Why does the "Move to new window" function that I used to use not work when I right click on the tab anymore?

It used to be when I right clicked on the tab in Firefox that I could use the "Move to new window" option. Now when I go down to that option it looks as though it is going to work, but nothing happens. The other day I changed a few options in Firefox, but I don't remember changing anything that sounded as though it would have this effect and now I can't find any options that seem to fix it. Thanks in advance for any help.

Hello Beorn, probably the problem is an extension that isn't working correct.'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
thank you

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

Is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

While working in Firefox is there a way to open a new window with one site when the home setting on Firefox has multiple websites?

I guess I'm not explaining myself fully. I have a home page designation in firefox preferences that starts firefox up with 5 sites. that pretty fills up my screen with tabs.
At some point I want to initiate another WINDOW in firefox (NOT a tab). I would like to be able to open up a window that ONLY has ONE tab, or as if there were only one site designated as the home page. This gives me a workspace that has my most useful sites available in tabs in one window, and also another WINDOW that I can move around in and even create more tabs without messing up my primary set of TABS (in my primary window). I see how this might not be doable without doing what I do now, which is open up a new window, and then close tabs until the new window just has one tab for me to work from.

When a script opens a new window, I would like the ability to not let the script use the full screen. I have seen that feature before, but for some reason I cant find it anymore. Has that been taken out ?

http://epaper.dawn.com. If you click on any of the articles, it opens that in a new window with full screen. I know I have configured FireFox earlier to not let script use full screen. I seem to not find it OR it has been removed.

See:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
*http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compresso

I have just upgraded from Elements/Premiere elements 11 to version 12. I am running on a PC with Windows 7. When I try to run video from the existing catalogue or video newly imported I get a window stating "....system does not have the required compressor/decompressor (codec) installed" Where has it gone? Where do I get a new one? I am getting REALLY REALLY fed up with trying to find an answer!!!!!!!!

Try to disable hardware acceleration in Firefox.
*Firefox > Preferences > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? Only one Sparse Bundle, same name.

Due to NAS issues, when I started a new time machine backup it did not have the old backups available. My question is do I need to delete them or will time machine automatically reclaim the space? There is only one sparse bundle but when I enter time machine I don't see my historic backups. I use a synology DS212 for my time machine. Started a new backup which is 218gb but it says 618 gb is occupied therefore it looks like 2 or 3 backups are still on the disk. Before my NAS issues the last backup was in 2014. As you can see there is a second sparse bundle from 2012. Not sure what that is.

This is an old message now, but what happened to me similarly was:
I had a major computer crash and through complicated pathways ended up reinstalling (Mavericks) as a new user (long story).
At least I had good Time Machine backups on an NAS drive (Synology DS212j), or so I thought - when I started Time Machine up again, the old backup file was gone, replaced by a new one using my "new computer" name. The old file was gone both by directly mounting the NAS drive and by clicking "Enter Time Machine".
It's like I had {OldShareName}.sparsebundle and then it was replaced by {NewShareName}.sparsebundle, all of the old info vanished.
(I have spent a week finding old files elsewhere and have completed a satisfactory self-restore. It pays to "archive" [my own variation of] as well as "back-up".)
My belief is that if this were a wired-netword-drive, e.g. plugged right into my iMac with a USB cable, then the old file would have remained.
But this is an NAS drive, connected directly to my Airport wireless router, and I don't know the significance of the fact that it stores its Time Machine backups as "sparsebundle" files rather than simply as plain(er) files.
As usual when things get complicated with computers (not just Apple computers) there was never a warning message. Something like "YOU'RE ABOUT TO DELETE A TIME MACHINE BACK-UP FILE!!!" would have made my life a lot simpler.
BTW, I did try a "restore from Time Machine" option the first thing I had my "new computer" (old hardware, 2009 iMac) up and running, using Migration Assistant, and it ran for many hours and then failed in the wee hours - what that has to do with anything I'm not sure.
I'm not sure that I have a question about this other than "why do these things happen to me?", but it's a warning. Apart from that I've been very happy with the stability and reliability (but not the cost or set-up complexity) of NAS vs. directly-cabled external drives.
Charles

Trying to download CS5 extended on a new laptop with no disk drive. Do not have my old activation serial number to do it online...any help much appreciated.

trying to download CS5 extended on a new laptop with no disk drive. Do not have my old activation serial number to do it online...any help much appreciated.

you need your serial number to activate.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I am clearly set up as the administrator on my pc and yet I cannot download my new cannon software cuz it says I do not have enough privileges. help !!!

Help please..a new user who is clearly set up as the "administrator" on my mac mini it even has the title under my name when I log in..trying to upload in my cd drive my new cannon software and it says I do not have enough privledges when I am clearly the admin.... I am at a total loss..apprecaite any help b4 I throw this out the window and go buy a PC again arghhhhhhhhh
I am running Safari 6.0.5

Throw the Canon CD out the window and following the OS X instructions for setting up a printer with your Mac.
For Mountain Lion, see > OS X Mountain Lion: Set up a printer
For Mavericks, see > OS X Mavericks: Set up a printer
If that doesn't help go to > Canon U.S.A. : Support & Drivers and follow their instructions for using that printer in OS X.

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the base for my new macbook ?

I migrated info from a hard drive to a new mac under time machine. It says I have shared files, but I don't see the old info on the new machine. Where do I look for it ? How do I make the old backup the basis for my new macbook ?
The old OS was Mac X 10.5.8. I think the new one is 10.7.2 Lion.

Have a read here How do I set up a new Mac from an old one, its backups, or a PC?
Stefan

Why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

why does my fan go into high speed noisy mode sometimes when I'm not actually doing anything on my laptop?

Probably Spotlight is indexing your HD? To stop this indexing, have a look here:
http://www.thexlab.com/faqs/stopspotlightindex.html
marek

I have one playlist on iphone4. how can i add new playlist without deleting old one. i do not have old playlist in itunes any more.

I have one playlist on iphone4. how can i add new playlist without deleting old one. i do not have old playlist in itunes any more.When i try to sync iphone with itunes it says that this action will remove my old playlist and all songs.

"it says that this action will remove my old playlist and all songs."
Are you connecting to a different iTunes library than you normally connect to? That will erase the songs and playlists since the iPhone can't be connected to multiple libraries even if it is in manual sync mode.
If you no longer have access to the original library that your iPhone calls 'home', then the only way to save the playlist (and the songs on your iPhone) would be to use a 3rd party application to extract your iPhone contents to this new iTunes library you're trying to connect to.

Why is HP SimplePass on my new windows 8.1 machine, when I do not have a finger or card reader?

Similar Messages

Maybe you are looking for