Why is iDVD burning incomplete?

I imported and edited my video in iMovie HD. I shared the video to iDVD and when I set everything up in the menus and all that, I burned my video and it ejects the blank DVD before it even starts burning. It ejects the disc at the "Multiplexing and burning..." stage, with a "Time remaining: about one minute". It says it's already done burning, but there is no burn mark on the DVD itself—it is still a blank DVD. I tried everything, I've gotten a few DVD's to burn, but some just won't burn.
How can I fix this issue?

Hi I managed to finally solve the problem and it was a simple DVD disc changing. SDMacuser reminded me of the speed of the DVD disc they have. The one I have is a 4X. I used a Fujifilm DVD+RW (no speed written on the disc).
What I did was a mix method as suggested on different postings:
1) Exported to idvd from imovie, with chapters. Change the navigation text. From +Why is iDVD burning incomplete?+ (http://discussions.apple.com/thread.jspa?threadID=1991062&tstart=15)
2) I burn a disk image as J Keller suggested, and used Disk Utility to burn onto the DVD disc. From +Idvd ejecting while in the burn stage+ (http://discussions.apple.com/thread.jspa?messageID=10293881#10293881)
I also burn successfully directly from iDVD using the faster speed DVD disc. So i would encourage everyone to check the burning speed of their DVD discs. It is usually written in big letters on the DVD disc surface: a number with a capital letter "X" as a metric. Eg. "2X", "16X". This might be the key to the incomplete burning problem.
I wasn't able to burn from iDVD to my DVD disc (with speed 4x), even after i have changed the burn speed settings of iDVD to 4x and 2x. Therefore i concluded that the problem is my disc.
How to change burn speed settings on iDVD:
-iDVD>Preferences>Advanced>Preferred DVD Burning Speed.
Lastly, the resources here really helped. Would encourage everyone to read thru the posts patiently. Most sincere thanks to everyone who contributed.

Similar Messages

Why will iDVD burn my images but then I can't playback the file?

I have searched and searched iDVD help for the past 3 days trying to find out why I can't retrieve my files after the disk has burned. It says that the files can not be retrieved! What am I doing wrong?

Hi again
May be I misunderstod Your question.
What exactly are You trying to do ?
Go back to iMovie for further editing a material on a DVD disk ?
Then You got trouble.
The way back isn't easy AND YOU WILL NOT get the same - original quality.
Why ? 1 hour of movie in iMovie (or on miniDV tabe) is about 13Gb
Your DVD disk can hold - if it is single layer - about 4.2 Gb
To get it to work lots of information is lost in coding mpeg2 and when
de-coding even more info is lost. = low quality
Easiest way to go back from DVD to iMovie is by my standard:
Connect a camera to Your DVD-player and record on a new miniDV tape.
Easy to understand way + best quality I've ever got
Minus is that it takes some time.
Hard way is to use a program that can de-code mpeg2 to streaming DV.
When this is done You will find that You got Your movie but no sound.
Then You have to de-mux the sound with eg. ddemuxer.
Programs You may be also would need to do it this way:
- * DVDxDV (free trial, 25$, Pro: 90$)
- * Apple mpeg2 plugin (20$) + Streamclip (free)
- * Cinematize >60$
- * Mpeg2Works >25$ + Apple plug-in
- * Toast6/7 allows converting to dv/import dvd, hit apple-k
Did I get Your question right this time ?
Yours Bengt W

Why doesn't iDVD burn changes made within iMovie?

I have iMovie 6.0.3 and iDVD 6.0.3 and have made several movies and DVDs over the past few years. But now have hit something very frustrating....
1) I've just completed a movie in iMovie. Took it to iDVD, created menus etc. then burned it to a DVD-RW. Noticed a couple of changes I wanted to make, namely a soundtrack volume adjustment, and a subtitle change (within iMovie). Made the changes in iMovie.
2) When I opened iDVD again, it said it noticed some changes in the iMovie project and would I accept them. Answered yes. When I reviewed these changes in iDVD preview, all was well. It showed the new subtitle.
3) Did another burn (3-4 hour process, mostly encoding) to disk image. Lo and behold, this new movie still showed the OLD subtitle!!
4) Deleted this disk image file. Checked the iDVD preview again, and it showed the corrected subtitle. Created a NEW disk image (for the THIRD time!) and four hours later discover that the OLD subtitle is still there!!!
What the heck is going on?? iMovie file was modified, resulting iDVD project file reflected the change, but the "burn" result does NOT reflect the change!!!! Why is iDVD Burn sill picking up the old version of my movie?____
Thanks-

You're right. Only selecting Advanced>Delete Encoded Assets did the trick. Otherwise, even though iDVD recognizes that the iMovie file had changed, it doesn't necessarily "pick up" all the changes ....unless you Delete Encoded Assets.
I don't know which changes iDVD does or doesn't pick up, but in future I will always Delete Assets to be sure. Saves lots of time in the long run.
THANKS for your help!!
P.S. I did not have background encoding enabled. Never do.

Why when we burn a DVD from iMovie, does it pause in different places?

Why when we burn a DVD from iMovie, does it pause in different places?

Hi
does it pause in different places?
During Burn ?
During Playback of DVD ?
On Mac ?
On Stand alone DVD-Player ?
During Burn.
What brand of DVD ?
What type of DVD ? DVD-R or DVD+R or +/-RW - SL or DL
Did You set down burn speed in iDVD ?
Free space on Start-Up (Mac OS) hard disk. HOW MUCH ?
Video codec used (feed into) iDVD ?
Yours Bengt W

Why does iDVD keep giving me a multiplexing error and ejects my DVD?

I have tried several times to create a simple movie with iMovie and iDVD. Both are from the iLife 6.0 series. Each time, the movie imports to iDVD okay, goes through all the asset encoding just fine, and when it get to multiplexing and burning, it stops with a message saying there was something wrong with the multiplexing or asset encoding and ejects the DVD. Help. I am at my wits end with this.
dennis

Hi
Multiplex Error - is one of the most complex error to run into - can be so much
see (especially new info at end of list)
MULTIPLEX ERROR !
Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
So first - turn on TV-Safe area and move any object well inside of this.
Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
Now my long long list on Multiplex Error
LONG LONG LONG LIST
Multiplexing Error
PART One.
Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
I only use.
Video - StreamingDV (miniDV tape via FireWire) and
Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
Photo - .jpg (.bmp known problematic)
Chapters !
A. Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
as described by Donnyboy69. Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
B. Location of Chapters
• Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
• Not in a transition (or within 2-3 seconds from it)
Important when from iMovie HD6 or previous - Now also observed when using FCE 4
PART Two.
from Robert Modero.
"Multiplexing Error. Problem during initialization of tracks"
Simply remember to add subtitles to your Quicktime files and menu buttons.
Once I did that, I was back in business.
from Boise Jim
Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
I always makes a DiskImage first and test this so that it runs OK
I use only - Verbatim DVDs
I use only - DVD-R
I burn at an as slow speed possibly e.g. x1
This gives good DVDs
PART Three.
Multiplex Error
Chuck, Chicago 2/7/2009.
Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
2. Disconnect any other external devices not absolutely needed.
e.g. external USB/USB2 hard disks, other FW hard disks etc.
3 Chapter marks in transitions - minimum 2 sec from
FROM Bev. (Not a 'guy' but I will answer!)
First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
Also, choose a slower burn speed, 4x or less.
Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
From. Boise, Idaho
I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
It worked, and I got a clean burn from iDVD.
Hopefully this can help other people.
by dheb0422
Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
One user more writes
To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
Video from both passed from FCE 4.01 with chapters
One project worked fine in creating disk image file
The other gave Multiplex Errors
I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
This time multiplex errors gone
So had something to do with chapters
So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
When I removed "bad" chapter mark (and others in), no multiplex error
As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
Rich839
In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
Russ One - suggest this
Multiplex Error-There was an error during muxing preparation
One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
Summary - What to try
1. Chapters
• Only A to Z and 0 to 9 in chapter title
• No Chapter mark at very beginning of movie
• No Chapter mark in or within 2 seconds from any transition in movie
2. TV-safe area for buttons (no one outside this)
3. Safe re-boot
4. No other external devices connected - that are not needed
SDMacuser adds to this
• On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
5. Minimum of 25Gb free space on Start-up hard disk
6. Make a DiskImage first - reduces where problem originates
7. Trash iDVD pref. file
8. Make a new iDVD project
9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
Max Mccarty
Mar 29, 2013 7:55 PM
I've made literally hundreds of DVD's using iDVD and I occasionally get the dreaded "Multiplex Error". In the past changing the position of chapter markers has worked, but sometimes the only way I can get the DVD to burn is to remove all the chapter markers (not a great solution).
Recently, I've discovered a bug in iDVD that creates the "Muliplex Error" message and it may be the cause of some of my previous problems. Sometimes when you export a movie to iDVD with chapters, it will create chapter menus with incredibly long playing times. My most recent "Multiplex Error" project had two chapter menus. I have a 38 second audio clip that I use for my DVD menus and the first menu showed the correct time of 38 seconds (select View>Show Inspector). The second menu with the same audio clip showed 13 minutes and 42 seconds! When I went to the Project Info window (select Project>Project Info) it now showed the total size of my DVD as 4.8 GB, too big for iDVD to encode. So, I manually adjusted the time of the second menu to 38 seconds. This time without changing anything else, iDVD burned the disk perfectly.
The interesting thing is that when I began the burn, the project info showed under 4GB for my disk. So, from now on I'll check the playing times of each menu before I burn.
Yours Bengt W

IDVD burning poorly? Help please

Hi,
Not sure why when i burn on iDVD the quality is freaking poor i'm burning on the best quailty (as per IDVD) so im not sure if it's iMOVIE that's transfering poorly or it's iDVD burning poorly.
I want that the DVD transfer from iMOVIE to come out the same as it is in iMOVIE.
Let me know what i can do,
-Joey

Hi Sue,
No it's just regular DV format to DVD... no photos or anything.
However in iDVD I did use a few photos for my menu screen before playing the actual dvd content... here's a screenshot as you can see it looks pretty clear however when i click on preference, under the PROJECT tab, I highlighted BEST QUALITY and it doesn't come close to the screenshot... why is that?
Is there a way I can make sure it burned very good? I know with Compressor (Final Cut Pro) you can save it as .M2V or .M4V and then burn it in toast along with the .aif file.
Here's my screenshot: http://i21.tinypic.com/24yzdye.png
I hope someone can help me out
Thanks again,
-Joey

Why does iDVD store stuff "all over the place"? Project now broken

Hi all,
did an hour long family movie project, and in the meantime cleaned up my documents folder and deleted some stuff that I thought was internet downloads etc, or extra working files.
Turns out it was the important audio stuff for iDVD!
I've broken my project... the stuff was obviously important, and now when I open this project it has a big broken chain on it.
Why does iDVD store important stuff "all over the place" like that? I mean, it's confusing enough (for newbies) to learn where the events and where the projects are stored, but why does it strip off the sound and store them in documents where ANYTHING could get deleted?

Just to add, an iDVD project should be thought of as a shell, an empty container. It has references to the media files used in it, but does not actually contain these files. The files remain in their normal locations. When you burn to disk, or create a disk image file, iDVD pulls these files just for encoding onto a DVD disk or into a disk image file. It does not really move these files into its project files. Your iMovies, photos and audio files remain where they are. If you move, change, rename or delete any of these files, iDVD will not be able to locate them, and you will see the broken link images.
For this and several other reasons, it is a good idea to leave everything alone and not go deleting any files until you have finished your iDVD project.
Then, when you are ready to burn it to DVD disk, be sure to do a 'Save as disk image' to create a disk image file of the project. This process looks like the burn process, and the encoding will take just as long, but the end result is a self-contained disk image file, not a burned DVD disk.
The advantage of the disk image file is that you will have an exact copy of your iDVD project with all the media files encoded into it. You now can safely delete all the media used in this iDVD project without losing the project. Now you can clean up your documents folder! Deleting all the files used in the project will also save you drive space.
You can save disk image files as backups and can move them to external drives or other computers. You can burn DVD disks from disk image files using Disk Utility or Toast. You don't have to worry about your burned DVD disk breaking/melting or having something spilled on it (kids in the house!). You can always get the disk image file and burn another copy. (Great for the relatives who somehow 'lose' the great DVD you made for them!).
You cannot edit the disk image files however, so you should be creating one only when your project is completely finished.
If you wish to save all your iDVD files while you are working on a project, you can archive your iDVD project. I have not found the need to do this, but the link J Keller gave you for the tutorial explains how to save as archive and as disk image. Obviously, the archive project will be larger since it is saving all the media. Archived projects can also be moved to other drives or computers.
Hope you can recreate your project.
Note to J Keller: the video tutorial was quick and gave the brief how-to and why. Nothing complicated.

IDVD burning one project on multiple macs? where are project contents?

How do I burn one project on multiple macs? I have a idvd project I created in keynote, added music to it in Garageband, exported to quicktime, and now is in iDVD burning just fine. However I have tons of these dvd's to make, I would like to put all my mac's to work.
last night i tried to share the file, and it is just an alias when i drag it over from the macbook it was created on to my imac. the file says it is in use and locked, since the macbook that created it is burning it. If I wanted to brun on the imac, I had to wait until the macbook was done.
is there a way around this? What if I copied all files I used to make the idvd project to my imac or any computer i wanted to burn on? woudl it hen allow two macs to be burning the same project?
I figured I could do this just like on my PC, drag the file over and voila...no such luck, its like if i had dragged a shortcut over to another pc...if the first one is using the file, its locked. Basically how do i get to the actual contents of the project, so I can also bring them over and hopefully it will allow me to burn on multiple macs at the same time?
my next solution if that didn't work was to start copying dvd's using popcorn on the other macs while the macbook continues burning through idvd.
Any opinions on how i can duplicate a dvd fast...need alot of copies!

Also as to where the files are.
I-DVD project bundle: This is the file created when you save the project.
• [user]/Library/iDVD/Favorites: This folder is located in your home folder.
• [root]/Library/iDVD/Favorites: This folder is located at the root of your disk.
• /Network/Library/iDVD/Favorites: This folder is on a network system specifically
configured by your system administrator for this purpose. (This is not the same as
having a server networked into your computer.)

IDVD burned disk does not start at main menu

The IDVD burned disk starts randomly in the middle of the disk. Cannot access the main menu. I started with an IMovie with chapter headings, videos and pictures. Then shared it with IDVD, created themes, music, changed the headers, etc. Burned the disk using the File Burn DVD command. The disk takes over 1 1/2 hours (IMovie orginal is 15 minutes) to burn.

Hello to all of you first-timers here!
Welcome to the discussions.
First, are you using iMovie 9?
Did you set chapter markers in iMovie? Did you follow the Chaper Marker Rules?
RULES: No marker at the beginning of your movie, no markers within 2 seconds of the beginning or end of the movie, and no markers on or within 2 seconds of your movie.
Next, did you put your movie in iDVD and then go make any changes to it? Sometimes that causes the chapters to default to the same spot in the movie. The only solution is to recreate the iDVD project.
You should first try deleting iDVD's preference file. You can find this by closing iDVD, going to your Home file (YourUserName)/Library/Preferences/com.apple.idvd.plist
Drag this plist file to the trash. iDVD will create a new one when you relaunch it.
Reopen iDVD.
Try creating the disk image file again or burning a disk again.
If that results in the same problem, create a new iDVD project. Then, drag in the iMovie project from the Media/Movies pane in iDVD instead of sharing it from iDVD.
Post back if that does not resolve the issue.

Idvd burned to dvd+r not compatible with pc?

i've dragged an imovie to idvd, burned a dvd+r and turned it over to someone to show on a pc, and it's not reading.
i would appreciate your help!
thanks.

The DVD drives on some PCs will have trouble with DVD-R, but should be fine with +R. You might want to try reducing errors by slowing down the burning process and using the highest quality media (Verbatim is often recommended; I also use Sony). To burn slowly, you'll need to create a disc image from iDVD, and with older versions of iDVD, I've read that Patchburn software is needed. Search this forum for details.
John

IDVD Burning then not burning

Hi,
I have created my project in iDVD and I am making multiple copies. iDVD burns to DVD ok and the DVD's play fine in a DVD player or PC. After the 6th DVD the discs are now blank even though the iDVD progress bar tells me it has been burnt them.
I tried re-creating the DVD again and exactly the same thing happened again. After 2 discs thet don't play. Am I doing something wrong?
Dame

I can burn about 2 disks then I start to get a message saying 'burn cannot be verifyed'
It sounds like something in your drive is heating up - I guess the drives in our computers may not be designed for 'production' use. You may have to adjust your disc burning duty cycle to something like do a burn, wait 15 minutes, do another burn, wait 15 minutes, etc. This should give your drive a chance to cool down.

TS2180 DVDs won't play in regular DVD players iDVD burns with no errors the DVDs always get out into a folder ???

Dear Apple friends The iDVD burns DVDs with-out any error messages but DVDs dont play in regular DVD players I notice that the DVD burns to a folder and there is no setting to prevent this How do you burn the DVD with-out it getting put into a folder ??? Thanks Mike

That often is a result of using inferior DVD disks and burning at too high a speed. What brand and type of disk did you use and what speed did you burn at?
Follow this workflow to help ensure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

Combining two iDVD burned DVDs on a single DVD (regular or DL)

Any insight appreciated:
Does any one know if it is possible to combine two iDVD burned DVDs (burned with iDVD current in 2002) on a single DVD either single or double layer?
17" Flat Panel 1GHz G4 1 GB RAM 80GB Internal Mac OS X (10.4.3) iLife '05 (iDVD 5.0.1 and iMovie 5.0.2) on internal, iDVD projects on 300GB LaCie external

This has been solved. Downloaded and used a program called Handbrake and it successfully extracted the movies, iDVD could read and with a new menu the combined effort was successfull.

Will iDVD burn a dvd with surround sound?

I have a quicktime movie with surround sound I'd like to burn to a DVD. Will iDVD burn this and keep the surround intact?
If not, will the latest Toast do this?
If not, are there any other OSX apps that will burn a dvd with surround, preferably a cheap one? I know DVDSP will do it, but that's overkill for burning one disc.
Power Mac G5 quad 2.5 and Mini duo 1.66 Mac OS X (10.4.7)

Hey don't get me wrong, dolby digital surround is way
better than ProLogic, but give the dudes credit that
came up with ProLogic in the pre-dolby digital days
some credit, it is "true" surround.
Sure, it is surround, but it's not the same as having four separate channels. There are limitations to what you can encode, and you can end up with unintended issues on both stereo and surround material. It was a cool invention that was a big improvement on stereo, but it just isn't the same as actually having the channels. It just isn't "four true distinct signals" - it simply can't reproduce everything four true distinct signals can.
I should have said I need actual discrete channels.

Why cant i burn audio cds?

i have been trying to burn audio cds from itunes/dragon burn and toast! it let me do it before but since i have bought new discs it wont let me do it anymore! i can burn data to them so why cant i burn audio? its comes up with an error: burn speed to fast please change burn speed and try again! i have tried it under each speed and it still wont work. can you use any cd-r? the ones i have are 52 x.....
help befoer i smash things thing to pieces!

its a generic cd, i tried another brand today (i have already tried 3 different kinds) and that one worked but i dont know which speed it was, someone gave it to me to try.
Thanks for the advice i will keep on trying!

Why is iDVD burning incomplete?

Similar Messages

Maybe you are looking for