Why is Illustrator 2014 not creating pixel perfect sizes, when snapping to pixel grid

I have the grid set to one line 10px intervals with 10 subdivisions so one pixel per line.  I have snap to grid on, I've switched off smart guides in case that was causing the issue.
But when I drag a shape to snap it to the box it will add some additional .0XX pixel size to the end.
It's making it really difficult to work when I have to go back and enter the values exactly.  Switching back to previous version but is this a release bug or is there a work around?

That seemed to resolve the issue but I found another issue:
- I check the align to pixel grid from the transform window
- I use the shape tool
- The checkbox for "align to pixel grid" unchecks itself
The shape tool still functions the way (aligns to pixel grid) I want but the UI is really bad.

Similar Messages

  • Why i can't not create new database in oracle 10g express

    why i can't not create new database in oracle 10g express?
    should i use oracle 11g standard edition?
    thanks

    In Oracle a schema is what a 'database' is in Sqlserver.
    And if you would have been aware about the limitations of XE, you would have known you can only create *1* (one) database using Oracle XE.
    However, probably you don't need a new database at all, and a schema will suffice.
    Sybrand Bakker
    Senior Oracle DBA

  • Why is 4.0b11pre not available in win64 and when will the regular betas get win64 version

    Why is 4.0b11pre not available in win64 and when will the regular betas get win64 version

    Mozilla will not be releasing a 64 bit Windows version of Firefox 4. They are creating 64 bit builds for testing purposes, but there will not be an official 64 bit Windows version until some time after Firefox 4 is released.

  • Why did I have to create a new ID when I logged into Communities this morning? Appears I don't have any history anymore either.

    Why did I have to create a new ID when I logged into Communities this morning? Appears I don't have any history anymore either. I used the same browser and username/password (its stored in my browser) and it asked me to fill out my profile and pick an alias. Not sure what the deal was, it appears Apple can't figure out this whole id thing. I've used other community sites for over a decade without having to change my user/profile, I don't understand why this is such a pain with Apple.

    Agreed! I was trying to find out how to reclaim my old name since I use it for all sites. I can't seem to find the answer so I made a new one to ask questions before giving up on it.

  • Why are my emails not deleting from all devices when deleted from one?  I have iCloud set up and turned on. I have ipad2, iphone5 and a Mac. What am I doing wrong?  Thank you

    Why are my emails not deleting from all devices when deleted from one?  I have iCloud mail set up and turned on. I have ipad2, iPhone 5 and a Mac desktop. What am I doing wrong?  Thank you.

    It depends on the type of email account you are using, not on iCloud.  If you are using an IMAP or exchange account, when you delete from one device, it is deleted from all devices.  If you are using a POP (POP3) account, it won't.  (iCloud email, Gmail and Yahoo are all IMAP accounts.)

  • Why IPHOTO album will not keep the template format when share to IDVD.

    Why IPHOTO album will not keep the template format when share to IDVD. Also, could be better if IPHOTO Album could access "inspector tool" with ability to change the slide duration time and apply a random "Transitions" to specific slide.

    Are you sharing an album of photos or a slideshow to iDVD?  If it's an album then what you get in iDVD is just a slideshow with the photos in it where you have to set the transition and slide timing unless you add music and select fit to audio.
    Don't know what you mean by the template format unless you're referring to the themes in a slideshow? If you share a slideshow the ss is converted to a Quicktime movie file and that is added to the iDVD menu window.  No changes are possible.
    OT

  • Why will my HP6510 not print to photo tray when I print directly from my computer?

    Why will my HP6510 not print to photo tray when I print directly from my computer?
    I am able to print to the photo tray when I print from a memory card, inserted directly into the printer.  However, when I try to print a picture saved directly to my laptop through my wireless connection, the picture prints from the main tray.  If I take the paper out of the main tray, I get the out of paper message.  When I first bought the printer, I had no problems with this issue.  The printer is about 2-3 years old.  I have gone into the HP software on my laptop and set the preferences for photo tray, along with the size I wanted and the photo paper I was using.  By the way, it is HP photo paper.  I have also done the same on the print screen on my laptop.  In addition, I have gone into preferences on the printer itself and chosen "Prompt for photo tray."  I have also uninstalled and reinstalled the HP software on my laptop.  I successfully printed the "practice picture" during the reinstalling process.  None of this has solved the problem.  
    I have no problem printing a document from my laptop wirelessly to the printer. 

    Hi mountainnana,
    Thank you for your response, sorry the guide was not what you were looking for.
    Here are some other suggestions:
    Open the HP Solution Center (icon is normally on the desktop.) Click on Set Preferences, Click on the Paper/Quality tab, for the Source choose Tray 2, choose the right paper size and media type. Click Apply, and then OK. Then try printing your photo again.
    If that does not work there could be a driver/software conflict happening. If that is the case please try our HP Print and Scan Doctor.
    Otherwise, proceed with a uninstall and reinstall of your printer software using the HP Printer Install Wizard for Windows.
    Hope this solves your issue, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • What am i doing wrong? Why Solaris 10 will not create fdisk?

    I am at wits end here, I have tried every known trick to get Solaris to load on my x86 machine.
    The original download was true, I checked the sums all was fine. Burned the ISO onto DVD.
    My old machine falls under the system reqs (memory is a little low, but it installs with text)
    I wanted dual-boot with Ubuntu, that did not work.
    I repartitioned the disk, tried to install S-10 first, that did not work.
    I put a new drive in, plopped the S-10 DVD into the drive...you guessed it, that did not work.
    I have used Ubuntus partition utility and changed some partition info within Ubuntu. That did not work.
    I have used S-10's partitioner, that did not work.
    I have used 3rd party partitioning tools...no go.
    No matter what I do, S-10 install will always stop at "Configuring disk (c0d0) -Creating Fdisk partition table.
    ERROR Could not create Fdisk partition table
    ERROR Could not label disk
    ERROR Could not update disk with new configuration
    WHAT IS HAPPENING?
    I tried to DL a new copy of S-10 but they upgraded it, and now this new version will not install at all.
    HELP! Please!

    There's a whole buch of things that could have gone wrong and I still can't tell which it is from the information you've
    provided.
    1) Up until a few years ago the Linux swap partition and Solaris both used the same system identifier (0x82)
    in the fdisk partition table. Solaris has changed to use a different value, but it still accept the old value
    to maintain compatability with older installs.
    At present Solaris does not look at or install into the extended partitions,
    To avoid this system identifier conflict, I sugest that you install Linux in the extended partitions
    and not in the primary partitions. This has other benefits as well.
    To do this you need to reinstall Linux and when you allocate space for linux just say that every partition is
    an extended partition (or not a primary partition).
    The disk will then appear as
    /dev/hda1 extended
    /dev/hda5 Linux root
    /dev/hda6 Linux swap
    /dev/hda7 Linux ...
    2) The entire industry (BIOS vendors, Solaris, Windows, Linux, Partition Magic and other similar tools) have gone
    through a tremendous growth in disk sizes. Up until recently (when Win/Vista showed up), we all pretty much
    agreed that we would allocate space in cylinders and agreed that a cylinder was 255*63 sectors). No real rules
    here, just a tacit gentleman's agreement. WinVT now allocates in multiples of 4096 blocks, and everybody else
    is juggling to accomodate the 800 pound gorilla, ....
    Bottom line - Solaris not overlap anybody else's partition, but sometimes we think we do, even though we don't.
    And we'll fail the install until we're happy. So when you allocate a Solaris partition, sometimes it's best to waste
    a little disk space and leave a gap (maybe as much as 16065 sectors) between adjacent partitions.
    3) When you finally get Solaris installed and you want to multi boot, you have to use Solaris's verion of grub
    and you cannot use Linux's version. (Linux's Grub does not support the UFS filesystem, but Solaris's Grub
    does support all the Linux filesystems.
    Before you install Solaris, when you are still running Linux, copy the file /boot/grub/menu.lst to a flash drive
    or something that is available under Solaris.
    After you've installed Solaris, open up the flash drive and merge the menu.lst file from Solaris and from Linux.
    You'll probably add the following lines to the Solaris /boot/grub/menu.lst file. Just copy what you find in the Linux
    file to theSolaris file.
    title Ubuntu, kernel 2.6.20-15-generic
    root (hd0,5)
    kernel /boot/vmlinuz-2.6.20-15-generic root=UUID=c12007d3-c840-436d-93c
    b-2d485a9b02cd ro quiet splash
    initrd /boot/initrd.img-2.6.20-15-generic
    quiet
    savedefault
    HTH
    Larry

  • Accounting No not Created For Sales Orders when Processed thru Credit cards

    Hi Experts,
    I was able to successfully post FI document through Billing document in SD.
    The Problem is encountered when a Sales Order is created
    for Credit Card customers.
    When the sales order is created the credit card information we are prompted with an error message Payment terms is a required field for G/L Acc so and so...
    The payment terms field in the posting key 01 is marked required and the same field for the reconcilation account is optional. However this config has not created any problem for the Non credit card sales orders.
    If any one has faced the same problem. Please help me out in this issue.
    Thanks,
    Chaitanya

    Hi Friends,
    Please refer SAP OSS Note 119047.
    In the OSS Note they have mentioned..
    Pass the payment terms to the field
    xaccit-zterm = '0001'. in the User Exit.
    Program : LV60BF0C,
    Customer Function '002'.
    Include File ZXVVFU02.
    SE 37:- EXIT_SAPLV60B_002
    Still I don't understand why SAP doesn't support payment terms for Credit Card. But when a Sales Order is  created without credit card the field xaccit-zterm  has a value.
    Thanks,
    Chaitanya K

  • Return key not creating a new line when using the horizontal text tool

    Going through the adobe after effects 'classroom in a book' examples - when writing a line of single line using the horizontal text tool pressing return does not create the next line underneath, the cursor stays on the same line?
    Anybody out there had this problem?

    Hi Bill
    Thanks for replying!
    My OS is windows 7. I think it is the first time I have needed to put more than one line of text in an after effects layer. I am new to CS5.5 - after effects and I'm going through an adobe tutorial  'classroom in a book' series book.
    I thought about using a paragraph text box as you suggest but could not find the function in the tools menu.
    I have since tried clearing the cache out and restoring default layout but with no joy.
    I have used the return key for multiple line text in premier pro and it works perfectly ok.
    Cheers,
    Alan

  • Should not create any output file when invalid input source schema

    I have a xslt file, which I have make code to check the order status value.
    If OrderStatus != 'Reject' --> create attribute, element for output file
    Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
    Requirement: if OrderStatus = 'Reject' --> do not create any output file.
    how to do with this requirement?

    I'd ask them over here.
    http://forums.asp.net/
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Should not create any output file when transform with xslt file

    I have a xslt file, which I have make code to check the order status value.
    If OrderStatus != 'Reject' --> create attribute, element for output file
    Else OrderStatus = 'Reject' --> do not create attribute/element ==> output is the empty file.
    Requirement: if OrderStatus = 'Reject' --> do not create any output file.
    how to do with this requirement?
    any help will be appreciated!

    Do you mean the xslt file always return the output file?
    I have tested this xslt file following (only xslt file, not run in BizTalk project):
    Create a blank console application using visual studio and add attached xslt file to newly created console app. Next open the XSLT file and select input file and output files and start xslt debugging to create output file.
    I want to edit the xslt file how to cannot create output file in the case OrderStatus = Reject.
    I don't say in particualr xslt file, its actually your map as a whole that returns a output message on successful execution.
    since you are testing the xslt file as individual file, you are able to control it as per need.  i mean you can write incomplete code or any kind of output elements that are not present even in schema. But when you set the map properties to use external
    xslt , map completely relies on xslt and xslt has to produce output that matches the output schema structure.
    So you better test your xslt by  setting it to your map. Once you set map properties to use xslt, you can test your map by right clicking on map and choosing test map.
    Please mark the post as answer if this answers your question. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Could Not Create Java Virtual Machine when lauching PS3 Meadis server

    I suddenly get the following error message when trying to launch the PS3 Media Server, " COULD NOT CREATE JAVA VIRTUAL MACHINE". I have tried uninstalling and installing both Java and the PS3 Media Server. Nothing seems to work. Any ideas or advice?

    You changed something on your machine. Might help to remember what.
    But to start with you first figure out if java itself is working. If it is then it is problem with the application and not java.

  • Why is my Ipad2 not connecting to my network when phone and laptop connect successfully?

    Why is my Ipad 2 not connecting to my network when phone and laptop connect immediately?

    Could be all sorts of reasons, Can you give us more details about your setup?
    Check to see if the wifi is turned on the the iPad. That would be the first thing I would check.
    Next what is the configuration of your network? Do you have a password setup to prevent others from connecting to your network? Any details you can provide will make it easier to figure out where your probem is.
    Paul

  • Why does my G5 not ask for my pswd when mounting a .dmg when my iBook does?

    i have an app on a disk that i am trying to put on my iMac G5. it opens but does not ask for my password. when i click the installer it goes through a couple stages but then says "there is nothing to open". so, i take this disk and put it in my iBook, it opens and i get the prompt asking for my password, i type it in, click the installer and the app installs no problem. i've opened apps from a disk before on my iMac with no problems. i get the same error response if i use the diskmounter or disk utility. if anyone has any ideas i'd be almost next to eternally grateful.
    cheers.

    To backup your data. So that if you get a new iPhone or your iPhone gets stolen or something like that, all your data will always be safe.

Maybe you are looking for