Why is internett so slow with Airport express???

Hi!
I have a mac mini and a pc.
I sometimes think that my mac mini is so slow when I use Internett.
There is a norwegian page that I have tested it on... and the answere was alarmin:
My pc had a connection of: about 4000 kbit/s connected to wireless and airport express... and about 6000 with out wireless.... hmmmm I tested it many times...
My mac mini (which is in my livingroom) had a connection at only 919 kbit/s????
why is it sooooooo slow???? can I do anything to speed it up????

Great Henry,
That was great advice, I have been unofficially been working in WiFi for my school and this is one of the most clear responces I've seen from discussions. Anyways some things that I do believe that you forgot was cordless phones 2.4Ghz range, microwave ovens, DSS (Direct Satellite Service), Electrical things like power lines, Other airport/WiFi stations, and moving objects made of metal between the computer and base station. Those are all broad things. Usually things like that won't effect it but it really depends. For the cordless phone you just need to change the channel on the airport. I hope that helps, Good Luck!
Jon
PS I have found that sometimes its just plain wackey, usually cause of wires and such things in the walls

Similar Messages

  • Imac internet not working with airport express

    Hi there,
    I purchased an imac for my upstairs bedroom, but the signal from the time capsule was weak, so I bought an airport express and set it up. But still I cannot connect to internet even though after running the network diagnostics say I am connected to internet. My macbook works perfectly in the bedroom with all airport bars working, but the imac still has only two bars. I've tried everything, help!!

    Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

  • Why is music is skipping with airport express?

    It worked fine for more than a year.  Now my music is skipping.  I have an airport extreme router and airport express on my stereo to stream itunes from my macbook wireless.  It's apples to apples to apples and not working.  Help me apple!

    After trying lots of things to stop the music skipping, such as channel changes and rebooting and restarting and reinstalling what seemed to do the trick was changing the radio mode on my airport extreme from
    802.11n (802.11b compatible)
    to
    802.11n (802.11a compatible)

  • Very Slow 12" Powerbook with Airport Express - 15" PB OK

    Here's my problem; Our 12" 1.5 PB is very slow with Airport Express but It is OK when directly connected to the cable Modem via Ethernet. We also have a 15" PB 1.67 that works great with Airport Express & Ethernet. The 12" PB takes approximately 4-10 times longer to load Internet pages than the 15" PB. Here's what I've tried so far without success;
    - made sure software was up to date (10.4.8)
    - turned off the A/E security
    - different A/E channels
    - moved the A/E base station to another location
    - a differrent A/E base station
    - a Linksys WRTG54 base
    - new Airport Extreme Card in 12" PB
    - ran Apple hardware test on 12" PB - checks OK
    - re-installed fresh OS and Apps from original install disks
    - Firefox instead of Safari
    - new user account on 12" PB
    - re-installed original 512 RAM
    Any suggestions would be greatly appreciated!

    Jerry,
    You're not going crazy, by the way. I have the exact same problem with my 12' Powerbook. I even tried swapping airport cards with another Powerbook. No luck. Ethernet is ok.
    Any help is appreciated.

  • I have internet service on iMac but cannot get connection for Blu ray with airport express.

    Why am I not getting internet connection for blu ray on tv with airport express?

    Which exact model of the AirPort Express do you have?
    Did the Blu Ray player connect wirelessly to the Express before or has it never been able to connect to it at all?

  • Sharing internet connection using 4200 speedstream with airport express

    I have xp windows sp2 loaded on a desktop with ethernet connection to a modem and have a macbook pro laptop using airport express. I have to reset the modem to full bridge mode to access the internet when using airport express wireless connection,this disables the connection to the internet on my desktop ( the error displayed is low conductivity through the modem). To get my desk top to work on the internet I have to reset the modem and set it to optus bridge. This allows access to the internet but disables my airport express connecton.
    Is there a way to allow sharing my connection to the internet without reseting the modem.

    G'day mate,
    The SpeedStream 4200 supplied to Telstra BigPond customers is a single user device, connect it to a 'Switch' or 'Router' to share the Internet Service or, replace the whole thing with an ADSL2+ Wireless Modem Router and get coverage all over your house.

  • Printing with Airport Express without an internet connection?

    I have a printer which I would like to print from my MacBook Air wirelessly.
    I don't have any network connections neither a internet connection since I use a wireless broadband card.
    So my question is, do I need to have a internet connection for the airport express or can I just use it as a wireless to print.
    Thank in advance.

    Though you don't need an internet connection (which technically you have with your broadband card), I have read of an issue with connecting to more than one network (i.e. AirPort Express and your wireless broadband). If there is an issue, then it is possible you will have to switch to the Express for printing and back to your wireless broadband when your are not.

  • Trying to set up wireless network on PC with Airport Express

    I'm helping a friend set up his network with AirPort Express. He's got a modem attached to his PC, and currently has a router that sends a wireless signal to a receiver on the PC in the other room. Now he's added a Mac, and the old router/receiver doesn't work with Mac. So he bought an Airport Express.
    I've turned on the Airport, and first I connected the ethernet cable from the modem to the AirPort. Per the AirPort utility I put on the PC, it couldn't find it (got the flashing amber light). So then I took out that ethernet, and I hooked up the ethernet directly from the CPU to the AirPort. Suddenly, it was found, and it took me step by step through the set up. It asked for password info from our internet provider (??why would I have that info??), so we just hit "enter". Then it couldn't set up the network, and said to check the "manage network settings". I've tried everything. Not only can I NOT manage to create a network, but now NEITHER ethernet cable will cause any recognition in the AirPort. All I get is the blinking amber light. I'm about to throw all the computers out the window...it really should not be this difficult. I've set up networks in my own home, before, with both PC and Mac, and never had these problems. So, now, I've had to relink up the old router/receiver in order to send out this call for help. Can anyone suggest anything else to try before I use these computers for target practice?
    Thanks in advance,
    Jennifer
    P.S. The main PC w/modem is on Vista with service pack 2.0...since I can't even get that one working with AirPort, I hardly think it matters what the other computers are...

    I had some initial problems too. Make sure that you have the latest Airport Utility in the utilities folder. I used that to correct the problems I had when I first got Time Machine. I recommend resetting everything through there to get it working right.
    Mine is not set up to run an n network because my macs are all g and b compatible. Does the airport utility see the time machine? And if so, does it have a green light in the utility?

  • Mac OS X not working with Airport Express but Win XP is ok on the same iMac

    Hello everyone,
    as the message says I am having troubles with Airport Express.
    To say it quickly, I live in a house share in London, and everyone in the house enjoys the wifi without troubles. I do as well with my macbook from every point of the house.
    The troubles are with the big iMac: with mac os the internet signal won't just work at all, pages take minutes to load with both safari and firefox, and most of the times the loading times out.
    I thought it was a signal power problem, but the weirdest thing of them all is that... when I switch to Windows XP on the same iMac (and right now I am writing from that!) the internet works perfectly!
    Then I switch to mac os again... and slow internet again!
    Anyone has an idea of what could this be?
    Many thanks for the support

    Yes, I just discovered this problem on my own machine.
    I just wanted to check some settings and discovered that the behaviour of the GUI of Server Admin was somewhat "erratic": First this "no services are configured" message. Some of the configured servers were marked with the usual green "up and running" bullet, others dark grey - those were normally configured and running and clicking the appropriate line seemed to force Server Admin to check the actual state and then turned also green. But sometimes configuration pages were "greyed out", or while switching through the tabs Server Admin claimed that where were "unsaved changes" which should be saved (or discarded).
    And then SMB: this was light grey, as usual when a service is not running and clicking on it I browsed through the configuration tabs - everything seemed ok (all my settings were correctly shown, configured as PDC with right domain name etc.) - and I started the service. Then suddenly the configuration settings changed to the default settings - no more PDC, but a "standalone server" with workgroup name "WORKGROUP"...
    Looks for me, as if Server Admin lost it's "source" file for the configuration (the file in /var/db/smb.conf says, that it is automatically generated -- does somebody were the source file is stored?)...

  • Setting up a multi-zone stereo system in my home with Airport Express

    I'm trying to set up an in-home stereo system using iTunes as my main hub.  I want to play iTunes as well as Pandora and possibly Sirius.  Can I set this up with Airport Express?  Would I control everything through iTunes on my MacBook or an iPad?  How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers?  I am comparing this to a Sonos system, but the Sonos is not really in my budget. 
    Also, what is the difference between Airport Express and Airport Extreme?  What would I need for this situation?  Thanks in advance for your help.

    >I want to play iTunes as well as Pandora and possibly Sirius. Can I set this up with AirPort Express?
    From iTunes you can stream a single audio source to one or multiple 802.11n AirPort Express Base Stations (AXn), but you cannot stream multiple audio sources to separate AXns. You would need a third-party product, like Rogue Amoeba's Airfoil to stream audio sources other than from iTunes.
    >Would I control everything through iTunes on my MacBook or an iPad?
    You could do either.
    >How is this all wired if I have some existing external speakers with a receiver in my family room, built-in ceiling speakers in the kitchen, and outdoor external speakers?
    Of the speakers you mentioned, only the ones connected to the receiver would work directly connected to an AXn. The audio output port on the AXn is a combo 3.5 mm stereo analog/optical digital port. Assuming your receiver accepts either analog or digital audio input, you can feed the output of iTunes or Airfoil from the AXn to the receiver. In turn, the receiver (if configured for whole home stereo) can feed the kitchen and outdoor speakers.
    >Also, what is the difference between AirPort Express and AirPort Extreme?
    What's similar: Both are Internet routers that provide wireless. Both provide the ability to share an attached USB printer. What's different: The Extreme has a built-in Ethernet switch. The Extreme supports sharing HDDs and printers together or separately via a USB hub. The Express has a built-in audio circuitry, the Extreme does not.
    >What would I need for this situation?
    Only the Express can accomplish providing an audio stream.

  • Can I create a home network withous dsl connection with airport express

    can I create a home network without dsl connection with airport express?
    So it means I can't connect to my HP Airprint/Wireless printer without exretnal connection through ISP?? Just need to print from my Mac and iphone. I have Vodafone Prepaid connection, which is directly connected to my Mac. Does that make an internal network possible?

    You have to set up the Air Port with an internet connection to set up a network. Do you have a modem? If yes you can set up the network. 

  • Can i use my ipod touch with airport express?

    I will be staying in a hotel that only offers hard wire internet connection.  Can I use my ipod touch with airport express to have have WiFi?  I won't have my computer with me.
    Thanks!

    Yes, you can. However, you will not be able to administer the AirPort from the iPod Touch. Thus you would need to pre-configure the AirPort Express to work at the particular hotel that you will be staying at. Note: Most hotels now offer Wi-Fi in the rooms and the Express may not be necessary.

  • Why have apple not launced new airport express 802.11ac version

    Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
    Do you think they will launch one soon as wanting to extend my WI-FI network but don't want to purchase current Airport Express 802.11n version if a new model is due to be on sale in the near future as would prefer latest models/technology.
    Please advise
    Regards
    Dave

    Why have apple not launced new airport express 802.11ac version, when recently launching new Airport Extreme Base Station and new Airport Time Capsule 802.11ac versions?
    Do you think they will launch one soon ......
    Sorry, but no one here on a user-to-user support forum will be able to tell you what a notoriously secretive company like Apple will do or when they might do it. We are all users.....just like you.
    You would need to ask Apple about this, although I would be very surprised if you get an answer with any real information.
    http://www.apple.com/support/contact/

  • Extend wireless network with AirPort Express

    How to extend the wireless network with AirPort Express and Belkin PlayMax as the primary router ?

    How it work if I have an AirPor Station and 4 Airport Express, I actually also have an old TimeCapsule and an old AirPort Express. Can I cover all my house (around 300 m2). And will the old Airport slow down or convict with the new ones?

  • My two iMacs frequently go offline when I have our iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices no problem. Any thoughts on this?

    My two iMacs frequently go offline when I have my iPad and two iPhones-5 connected with Airport Express (2nd edition). If I disable WiFi on my three "i" devices the offline problem stops. Any thoughts on this?

    .....doesn't that seems to suggest the modem?
    That is what I have suggested....twice now. From posts above:
    My opinion would be that it is likely not the ISP, unless you have complete loss of Internet service for all devices at the same time......it is the Comtrend device....
    and
    I believe that the problem lies with the modem, and not the ISP signal.
    Your ISP will likely have a different opinion, though. Please keep us posted on your progress.

Maybe you are looking for

  • How to ADD field in iview ?

    hi, in portal-iview i want to add a field. when i go to 'portal-content -> open the iview with right click -> preview' and then do ctrl-alt-right-mouse click i got to the customizing of the fields. i know how to HIDE fields there, but i don't know ho

  • Ipod touch 5th gen not restoring? Unknown Error 14?

    My ipod touch 5th generation (which I've only had for a little over a week) stopped being able to sync with iTunes and told me that i need to restore it. I tried other options first (making sure firewall was letting itunes through, updateing itunes,

  • Function of HOLD DATA in the settings for creation of a new screen.

    Hi, Since i'm new to ABAP and still learning my way through, i would really appreciate if somebody can help me out with the exact functioning of selecting the check box 'HOLD DATA' under the settings option while creation of a new screen. Thanks for

  • FUNCTIONAL SPEC FOR ABAP REPORT DEVELOPMENT

    Hi There, Can someone please help with a sample of Funtional specs for ABAP Z report development that i could give ABAPer. You can scrub the report for names cof company and other personal info, i just want to see what is essential and what is not es

  • SQL Server 2012 in restoring mode

    Hi All, My database is in "restoring" mode and is taking forever to complete the activity. Need some help to get my db back. Regards, Abhinay Tharwal