Why is it coloring outside of my selections?

I am trying to apply flats for a comic. For some reason, Photoshop is coloring outside of my selections. You can see this most clearly in the hand of the robot, where there is a feathered grey outside of the selection. I assume I just have a setting wrong or something. Any help you can offer would be greatly appreciated.

There are several setting you should look at Selection feathering, Brush hardness. I also think Adobe Photoshop Brush strokes are anti-aliased painting with a pencil may produce sharper edges. Also have your comic book black outline on a transparent layer above the layers you color. That way the outline will not compromised with color.

Similar Messages

HELP ! why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !

HELP ! why doesn't color picker select specific color ? i make secondary layer and use the tool but no colors are selected and the gray out menu shows nothing !
what am i missing ??!!

Please add you system info and SpeedGrade version and build number if you actually want help.

Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image?

Why doesn't the "Command Number" keyboard shortcut apply the colored label to the selected image? The similar keyboard shortcut to assign stars works, but the shortcut to assign a label color doesn't?

Just to be sure they haven;t been reassigned in your Aperture go to Aperture->Commands->Customize then in the search box in the upper right hand corner enter color.
You should see the keyboard shortcuts and the corresponding add label commands.
If they are set then quit Aperture move you preference file to the desktop and restart Aperture. The instructions for moving the preference file can be found at Aperture 3: Troubleshooting Basics
Post back the results
Message was edited by: Frank Caggiano - Added preference file move

In the year view, why is iCal coloring the boxes?

In the year view, why is iCal coloring the boxes and what does each color mean and how do we change it? It makes no sense or has any rhymn or reason according to what is in my calendar.

By default it is colored by the number of entries for each day. From white for no entries through yellow to orange and then red for the most entries.
Hope this helps.

When "allow pages to choose their own colors, instead of my selections above" is un-checked in the options menu, I am unable to see images on websites. How do I maintain having the box un-checked and still view images?

I recently decided to switch the colors around in Firefox. I work in a pretty dark environment and having dark colored text on white or bright backgrounds is rather difficult on my eyes in the dark.
I switched the background to a dark gray, the text to a light gray and both visited and unvisited links to a light blue. Along with these changes, I unchecked the "allow pages to choose their own colors, instead of my selections above" box.
After unchecking the box, I am no longer able to view images on many websites. The images all turn gray - as if Firefox has changed their image into part of the background. When I check the box, I am able to see images fine, however, the websites usually revert back to their bright backgrounds with dark text.
Any help and assistance with this is greatly appreciated!
Thank you!

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also k

Need a shortcut to "Allow pages to choose their own colors, instead of my selections above option preference" I know where it is and how to use it but I have to go through 7 mouse clicks to change it, then a few minutes later change it back. I also know the sequnce is alt t, alt o, alt c, alt a, then ok, ok. Got to be a way to make a one key short cut for this. I use a black background to reduce eye strain, but about 10% of the webpage I go to can't be send with black so I have to go into tools and hit 6 or 7 things to chnage it then after through with webpage have to do it all over at Not allow webpages to have own color. Very very cumbersome.
== This happened ==
A few times a week
== made that way

https://addons.mozilla.org/en-US/firefox/addon/toggledocumentcolors-198916/
The above addon will solve your problem.
Shortcut to toggle user color/page color :- Ctr+Shift+C

Why does the color and or tone of my image change?

Why does the color and or tone of my image change after working in LR for a couple of hours? I open LR and everything looks fine - work for a couple of hours on the same shoot - but then the pictures start to look flat or greenish cast as time goes by. All the files get flat and the greenish cast after a couple of hours - the ones already worked on and the newer ones I'm pulling up to work on. RAW files downloaded from a Canon 30D. Also exporting to PSCS2 as PROPhoto results in a flat image. I switched back to export AdobeRGB.

Hola - thanks for the reply - yep - closing and then opening LR helps - but can't do that all the time after processing 3 or 4 files.
One reply was a corrupt monitor color profile - So I deleted that one and loaded a new adobeRGB profile. That helped a little also for a while - I then reloaded my monitor drivers and refreshed them - that help for a day - the greenish cast is back It works fine on my laptop for now. The same pictures that look greenish in LR look great in Canon DPP. So it probably wasn't the color profile or monitor drivers. My issue started with the small scale previews so I bumped that up. Still have the issue. I finished up a project and now going to uninstall and reinstall LR. Let's see what happens with a fresh install. andy.

Why does right clinking on link and selecting open in new tab does not work?

Why does right clinking on link and selecting open in new tab does not work?
It opens up a blank page. The only way to make the link work is to click on the navigation bar in the new tab and press enter to reload the link.

Do you have that problem when running in the Firefox SafeMode? ''A troubleshooting mode.'' 
1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. 
2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Why I Can't use procedure in select statement

Why I Can't use procedure in select statement

We can use function in select statement but we couldn't use procedure with one out parameters in select statement... You can use Function because they are designed for this but procedure are not. Functions can return value (without OUT parameter) which can be used in SELECT whereas procedures do not have such concept. As you can see in the above post you can not call even functions also if it has any out parameter.
I have just trying to use procedure in select statement ..for this I require technical answer..The technical answer is because conceptually procedure is for doing set of operation, performning DMLs on the tables , whereas functions are for processing and producing a single result. Functions are basically for not using INSERT/UPDATE/DELETE in it. That is the reason they are allowed to be used in SELECT because conceptually they are not supposed to do any data changes.
Regards,
Avinash

Exporting Why is the color so dark

When I am working in AE CS3 the color looks great but when I export it Animation + with RGB Preserved, why does my colors look really dark? Is there a setting I am missing?
I am using an IMac with Intel prossessor. It also looks dark on my boss's HP PC. Oh and yes I am using the render Q

Also take into account that many office PCs are misconfigured, i.e. either forcibly toned down in brightness and contrast or simply because they are of low-price ranges (as obviously you don't need extreme stuff just for typing word documents and doing e-mail) ;-)
Mylenium

[AS, CS2 / CS3] Get Fill Color When Nothing is Selected (defaults? preferences?)

Hi,
where can I find the active color, which is active (border and fill color), when nothing is selected.
E.g. I can get the active styles, when nothing is selected with:
applied character style of text defaults
and
applied paragraph style of text defaults.
Where nac I find the equivalent for fill and border color?
Thanks
Tobias

Thanks, that was for CS3. Where can I get that in CS2?
I searched the dictionary of document and application, but got no glue ...
Thanks
Tobias

How do I ''transfer sync'' from my iPod to my iTunes? (I have the option, but it is in light color; I can't select it). My iPod is a shuffle, and my computer an iMac os x, version 10.9.5

How do I ''transfer sync'' from my iPod Shuffle to my iTunes? (I have the option, but it is in light color; I can't select it.) My Mac is OS X Mavericks, version 10.9.5

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Color not changing on Selected Menu tab

I'm creating a custom css and in doing so have been trying to change the text color of the selected menu tab. I've added it to my stylesheet but it is not changing upon running it. If I change the menu tab specifically via the properties of the tab, it will change. Is 'color' something we can change?
Here is a snipet of my css:
.af|menuTabs::selected {color:red;
white-space:nowrap;
font-family:Arial,Helvetica,Geneva,sans-serif;
font-size:200%;
background-color:white;
font-weight:bold;
text-decoration:none;
Thanks,
Lisa

A: Color not changing on Selected Menu tab

Your '.' before af|menuTabs is wrong.
It's just "af|menuTabs::selected" not ".af|menuTabs::selected".
Also, you need to use the ::selected-link pseudo-element to style the color of the text.
/* Make the selected tab bold */
af|menuTabs::selected-link
font-weight: bold;
font-size: 14pt;
color: green;
}

Why can't I get the advanced selection available in EPUB export options in illustrator CC? It's just not there.... Neither is the image selection available. Only Epub reflowable and fixed layout, but not EPUB...

Why can't I get the advanced selection available in epub export options in illustrator cc? It's not there and neither is image selection. only epub reflowable and fixed layout but not just epub.. I don't know where it is to do some book exercises for my studies. Very frustrating.

This is the EPUB forum: InDesign EPUB

Changing row color when ever will select that row.

Hello,
After applying themes which property do i need to to change so that the color of the row will change from from dark yellow to some light color when ever i select that perticular record
in table UI Element.
Thanks & Regards
Kiran

Hello Kiran,
In theme editor go to Complex Elements -> Tables -> Side Heading Selected Cells -> Background color of Primary selection.
Hope this helps.
Cheers-
Pramod
award points if helpful.

Why is it coloring outside of my selections?

Similar Messages

Maybe you are looking for