Why is it in Disk Mode?

I came home yesterday after staying at a friends to see my ipod on. I was all "***?" so i looked at it and it said "OK to disconnect" and it had no color and the top read "Disk Mode"
I plugged it into my computer and nothing works. I can't even turn it off!
How can I fix my iPod so it can actually function?

Reset it.
See this.
How to reset the iPod.
It may take quite a few attempts and is best done connected to power.

Similar Messages

  • Boot up from target disk mode doesn't work. (Why?)

    I have a 2010 Macbook Pro, and a 2013 iMac. I connected the Macbook pro with the firewire cable to the iMac, and enabled target disk mode on the laptop. (It is successful because I see the hard drive appear on the iMac desktop.
    I restart the iMac and hold 'option' to show the hard drive list, and sure enough the Mac Book Pro hard drive appears. I select it, and this lovely icon greets me.
    From this point, I have no idea what to do.
    Would you happen to know why it doesn't work and/or how to fix it?

    I am able to do that... this is not the problem.
    I have seen people boot up from the hard drive using target disk mode. When I try to do it, it doesn't work. Does this feature still exist?

  • Why MBP heats when working in target disk mode?

    I connect my MBP to iMac using target disk mode through Thunderbolt interface, close the lid and work on iMac booted from MBP's disk. My understanding is that in this mode MBP should consume very little energy because CPU and GPU are mostly inactive. But I can feel that MBP actually heats up considerably. It not critically hot, but still hotter than I would expect. Can someone explain why this happens?

    For FireWire Target Disk Mode, if there are two drives connected to the same IDE bus, I believe only the one that is set as Master is accessible from the "other" computer.  So it's possible that your optical drive is Master and hard drive is Slave, in your config.
    Copying the files to the external drive, while the iMac G4 is still bootable, was a good move.
    Once the data is safe, you might try the following (assuming you are able to continue starting up that iMac).  Download a cloning utility, such as Carbon Copy Cloner
    http://www.bombich.com/
    Clone the internal drive volume to a FireWire external drive volume.  Set System Preferences Startup Disk pane to start up from the clone on the FireWire drive, and try to start up from the clone.  While started up from the FireWire drive, you can run Disk Utility on the internal drive.  Maybe you can do a Repair Disk successfully.
    You can also use Disk Utility to completely erase the internal drive.  Be sure to select the internal DRIVE (not the volume indented under the drive) in the sidebar, then go to the Erase tab.  Doing an erase in this way will re-partition and reformat the hard drive.  That may get rid of your data corruption problem.
    Then, clone the clone back to the internal drive, and try to start up from it.  If there was an underlying hardware problem on the hard drive, this will not fix it.  But if it was just data corruption at the volume level, that iMac G4 may still have some life left.

  • When/Why is TARGET DISK mode necessary?

    I am hoping for some frank and practical advice from the Mac Gurus.
    The background is that I am about a year and a half into a move to mac from a "PC" (really Windows XP on Boot Camp on my Mac Pro) and I now have both the MacPro running Snow Leopard and the MacBookPro running Snow Leopard.
    I had a heck of a time with permissions and other assorted complications in trying to get my data MOVED from the PC environment and now I am finding that I still have assorted issues (various errors and permissions and file in use etc) in MOVING data from the MBP to the MacPro. My routine now is to COPY data from one machine to the other machine and then to go back and DELETE the folder on the originating computer. I do this because if I force a move by holding the option key down, I find that I am a total and complete loss as to WHAT has been moved and what has not been moved and if the folder that was being moved has multiple SUB-FOLDERS with files in them it is almost impossible for me to determine how to recover from this - effectively - crash. Previous advice has been to simply do an Undo but this is impractical in the sense that I cannot stop my day simply because I want to move a folder that will take a couple of minutes.
    Also, I am now trying to make sure that I PLUGIN to Ethernet and TURN OFF the Wifi in order to make sure that I am moving data via Ethernet.
    To be honest the decision to COPY data is a new one and I am not sure how effective this is going to be but I have been running into a lot of errors when I was force moving data. This always seemed to me to be a much "cleaner" way to do this since it meant I was not open to the possibility of making a mistake as to what had been moved already (in a hectic day or with a long time for a copy of data) and it also seemed to me to be a good check that everything had been copy-moved since the computer was deleting the originating folder, instead of my doing it manually.
    Anyway, long story short -
    1. Are there any "cleaner upper routines' that I should be running on these two machines to prevent these various errors and/or to check that everything on each machine is copascetic?
    2. /When/ do you decide to boot into Disk Mode and do you basically check the size of your large folders before Moving or Copying Data in order to do this? I assume you can only use target disk mode in firewire is that right?
    3. How do folks work in a large networked office with big amounts of data moving around? I mean, is my experience typical and if not, why am I having such difficulty with this?
    Thanks for any advice

    See mount section in 1st linked article.
    Disk Unmount Using Terminal

  • Why can't Disk Utility wipe my old iMac in Target Disk Mode?

    I want to donate my old iMac G3 with all my personal data removed.
    As all my old start up disks are long gone I went online and followed advice to wipe it remotely. I connected the G3 via FireWire to my 15" MacBook Pro (late 2008, running OSX Lion 10.7.5) and restarted the G3 in Target Disk Mode. I opened Disk Utility, selected the drive (not the iMac partition), selected Erase, renamed the drive and chosen the 7 pass option. And waited...
    After leaving it overnight, I awoke to find it was still preparing. I then Skipped that stage (it gave me the option) and left it for 24 hours. It was still skipping, so I had to Force Quit Disk Utility. The G3 is perfectly fine, and Disk Utility works as I just erased a memory stick as a test.
    What's going on?

    You need to do the following:
    Drive Partition and Format
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Only use a single-pass to zero the data. Any more is overkill and will take many hours to complete.

  • Why is my ipod nano 5g always stuck on the apple logo when i turn it on.I have put it n disk mode and repaired it with microst essentials and it says all was fixed but when i restart it it still is stuck on it.Also itunes doesnt reconize it

    so when i turn of my ipod its always stuck on the apple logo.Ive tried disk mode and it still doesnt work.Also it isnt reconized on itunes so i need help badly

    Did you try rebooting the iPad? You will need to have some battery power for this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This may be helpful
    iPhone, iPad or iPod touch: Not responding or does not turn on
    Frozen or unresponsive iPad - Apple
    iPad: Unable to update or restore

  • Help! Can't mount iPod to Mac OR PC, and neither Restore or Disk Mode work

    My 5th Generation iPod is not being recognized by my Windows or iTunes whenever I try to mount it, nor is it recognized by my friend's Mac or iTunes whenever I try to mount it on his. Because I cannot get my iPod to connect to a computer, I cannot Restore it. Also, I have tried to get both computers to recognize my iPod by putting into Disk Mode, but my iPod screen only displays the "OK to Disconnect" screen (and neither computer recognizes it.)
    The only idea I can think of is to Restore it without using a computer (if that is even possible.) I am open to any ideas though.
    My iPod is past its warranty, so I would greatly appreciate any help, advice, or suggestions short of sending it in to Apple. Thanks in advance.

    Problem solved!
    I let my iPod die COMPLETELY down, and then I took it out of its protective case and plugged it into my computer, and it is syncing properly now. I don't know why fixed it (because my case may have been preventing it from plugging in completely) but everything is fine now.

  • Cant figure out what "disk mode" is

    PLEASE HELP!!!! my ipod is saying "disk mode" on the screen and ive done everything to try to fix it but its locked up. why is it doing this and what does it mean??

    Disk Mode is useful for troubleshooting problems.
    Reset it get it out of disk mode...
    Resetting Your iPod
    btabz

  • MacBook in target disk mode shows incorrect disk size

    My 80 GB hard drive in MacBook has gone bad (the filesystem is in inconsistent state). I connected it to an iMac in Target Disk Mode. It shows up (unmounted) but the capacity reported by Disk Utility is 20 GB. Does someone know why is that? Is it due to the corrupt filesystem?
    I am afraid that given this situation, if I buy and run DiskWarrior, that too might not be able to see the full disk and fail to repair it. Note that if I boot my MacBook using the Apple CD, the Disk Utility shows the correct disk size.
    Thanks.

    If you have a disk that is in really, really bad shape to the point that Disk Utility looks at you like a 5 year old that just spilled a glass of apple juice on the kitchen floor, it's time to bring in the big guns.
    DiskWarrior.
    I love it, I love it. If someone has something bad to say about it, they are lying. If there is a chance that you can get everything back to normal without spending the huge dough to send your drive out to be dismantled in a clean room, DiskWarrior is that chance.
    It's worth every single penny.
    Let me know if you have other queries.

  • Help: Windows XP on MacBook Pro Boot Camp Partition via Target Disk Mode

    Firstly, let me lay out my situation. I have an old MacBook Pro (2,2) with a broken disk drive. It was dropped in its youth and can no longer read from or write to CDs or DVDs of any kind. I have just recently bought a new MacBook Pro to replace it (6,2) and am currently trying to convert the old computer into an XP machine through Boot Camp. I'd like to be able to do so without having to buy an external disk drive.
    After a clean install of OS X (10.6.3) onto the old machine, I successfully partition 85GB of space (although I previously attempted the same with a 32GB file system to no avail as well) for XP to be installed upon. Because I cannot boot my XP install disk directly from the broken disk drive, I then close Boot Camp Assistant and shut down the computer. I start it up in Target Disk Mode to be accessed from the new MacBook (6,2).
    Once the old MacBook is connected, I insert my XP install disk into the new MacBook (6,2) and boot from the disk. After allowing the XP (Professional) boot to load the install files, I arrow-key down to my 85GB partition (FAT32, named standard as "BOOTCAMP") on the old MacBook (2,2)'s hard drive and select it as the partition I would like to install to. This is where I am directed to a new boot window that tells me in a series of paragraphs that the XP installer cannot reach the selected partition for what seems to be a number of reasons. What it seems to be trying to say to me is that it cannot do a remote install of XP on a Target Disk Mode-connected machine, while not "knowing" that I am trying to do so. It's a similar message to the one that Boot Camp Assistant shows when one tries to create a Boot Camp partition on a machine that is being accessed via Target Disk Mode (Apple puts it much more clearly than Microsoft).
    I'd be perfectly content, albiet slightly vexed, to conclude here that it is not possible, shuttle over to the nearest Best Buy, and purchase an external disk drive if it weren't for one thing: I tried the same thing two weeks ago with Ubuntu 10.10 and it installed perfectly on the Boot Camp partition I had created then (I have since wiped all and installed OS X cleanly on the laptop).
    Here comes the point/questions:
    If the Ubuntu boot disk can access the partition, why can't the XP boot disk?
    Is there some way to convince the boot system that the drive is local, rather than being accessed via Target Disk Mode?
    Is there an easy solution that doesn't even require that, and will allow me to install to the disk over a firewire connection?
    If anyone's knowledgeable and/or brave enough to tackle this one, I'll be eternally grateful. Heck, I'll be grateful if anyone even attempts to tackle it.
    Thanks,
    -Alec Page

    Windows XP will only install from the optical drive. Target Disk Mode does not work with Windows volumes. Windows will not install from any external device.

  • Hard disk not recognised - will not boot from cd & No FW Target Disk mode

    hi,
    some help would be greatly appreciated.
    Some time ago i was switching internal hard drives around and wound up with a kernel panic of some sort (see my previous posts).
    following on from this I have tried FW target disk mode with no success, and it will not boot from a retail Tiger install disc (this machine has tiger installed (i think!). I can't force a boot from the optical drive and i also can't even force it to eject the disc inside to try another install DVD/CD (I have panther discs lying around also).
    when i start up with the c key nothing happens, but when i start up with the alt/option key i get a closed padlock symbol, password entry field and a "right facing arrow" button.
    anyone got any clues with this? i'm guessing it could either and/or be an internal hard drive ribbon failure (i have swapped internal HDs multiple times in this machine, which can't be good for it) or the familiar PRAM problem (although why would it not boot from an install DVD if this was the case?). I have changed the power supply unit in the past due to having a power cable snap off inside the original one - damage to PRAM caused by this?
    help would be muchly appreciated!
    Jesse

    Hi, Jesse. Remove the hard drive and its cable, then see whether you can start up from a CD or DVD. If that works, replace your hard drive cable.

  • HT1661 Problems mounting Imac in target disk mode on retina laptop with a solid state drive as host

    I'm trying to use an Imac in target disk mode to copy files from it to a new retina display laptop with a solid state drive, but the target drive will not mount even tho it does start in target disk mode. I have all the proper firewire connection. The Imac will not respond for more than a few minutes before crashing when started from its own system. I would like to salvage a few files from it before I perform a clean install of the system.
    Anyone has any idea why it wont mount in Target mode onto the retina laptop? Help!
    Thanks in advance. :-)

    Mac OS X doesn't offer a "clean install" option.   
    I'm assuming your target Mac is running 10.6?   
    And you setup the target Mac without adding a Firewire cable until after the Firewire logo appears on the screen?

  • Ipod can't mount error, and cannot restore it even in hard disk mode

    OK, so i've had my 5G ipod about a week now, no joke, got it on my brithday on the 24th of April. the first thing i did was update it's firmware and yes i have the newest itunes and quicktime installed on my pc.
    i've got to say i've had a lot of freezes during video playback and had to restart it a few times, it happened once again today, and upon restarting i got the go to http://www.apple.com/support/ipod along with the folder image. since then i've never been able to start it up properly, and i can get it into disk mode or connect it to the computer and its recognised on the USB, but i noticed the images on the ipod are the black and white ones, and it's not in colour.
    i triedto restore it, but no luck, it says 'ipod can't mount'. i put it in disk mode and then tried to open it through my computer and it says it's not formatted, so i try but it doesnt let me and says theres nothing connected.. i check the disk management in windows xp, and it shows up as "unreadable" and not in the partitioned and formatted disks list. i have absolutly no idea why this has hapened, and i've tried everything i can think of to fix this.
    i will most likely take it back to the store and get a replacement within a week, but i'm just wondering if anybody has any experience with this problem or something similar? i've read about somebody popping it open and disconnecting the battery, but since i'm only a week into it, i'm not gonna bother with this in case it could void the warranty..
    so yeah, unless anybody has any ideas i'll take it in as soon as possible..
    any suggestions appreciated thanks
    P4 1.4Ghz   Windows XP Pro  

    i took it in, and they said they will replace it on the spot if i bring it back in the box.. so that's what im doing today.

  • In disk mode the music is there but in itunes doesn´t appear what can i do?

    i had 2 gigas of music in my ipod. so i was using itunes 6 to add more music and suddenly itunes froze, and i had to use Ctrl + alt + Supr to close it, then i tryed again and there was nothing in the ipod, so i disconect the ipod from the computer and it was tru, there was nothing on the ipod, i put it in disk mode and the music was still there, and in properties shows 2 gigas are on use, SO WHY iTUNES AND THE IPOD DON´T RECOGNIZE THE MUSIC...What can i do???... please help..

    Have you tried downloading iTunes 7 and refreshing your iPod? As long as you have your music on your computer still, you should refresh the iPod to it's default (factory) settings and re-import all of it.

  • Grey screen on Target Disk mode boot up

    I have a home iMac, Late 2012, OSX 10.9.1, 32GB, and a corp MBP, Late 2011, 8GB.   I would really like to use Target Disk Mode to boot the MBP on the faster iMac -  it worked once or twice and was fabulous, but that was when both were on Lion.
    Now after upgrading both to Mavericks, Target Disk mode bootup isn't working anymore.  I get to the Login Screen on the MBP bootup, but after logging in i just get a grey screen. Nothing else.
    Pretty sure i'm doing everything right.  Connect both, boot target with cmd-T, boot host with "alt", select startup disk, login ..... then nothing. 
    Fix is probably simple - any help would be great.

    Ok this is a guess.
    Are you trying to use the system files etc on the iMac to run the MBP?
    If so I am surprised it worked in Mountain Lion, the Video cards probably have different drivers and that could be why you cannot login but the login screen with standard resolution works.
    You could try and match the resolution on the iMac with one that suits both machines but running it that way is not something I would do.
    Perhaps I understand your question incorectly, if so apologies and disregard my post.

Maybe you are looking for