Why is it necessary for this app to record audio, take pictures and video WITHOUT my permission?

Playstore permissions to install Firefox.

It it likely due to the HTML5 features of firefox, it should ask you if it wants to use your camera, before actually using it.

Similar Messages

  • I used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos?

    i used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos? This also the first time that I'm using the apple support communities.

    You can import the videos and photos using iPhoto or Image Capture on your Mac.
    Connect the iPad to the Mac with the cable and launch either of those two applications on the Mac. Your iPad should appear as a device in the left side of the app. Click on the iPad name and then you should have access to all of the photos and Vidoes in the camer roll and you can import them onto the Mac.
    Im not sure what the reference is to Power Point in this case. You can use the imported photos and videos in a Power Point presentation after you import them to the Mac.
    Are you trying to create a Slide Show on the iPad? Is that what you mean by a Power Point presentation?

  • When you back up your Iphone/Ipad it backs up for camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

    When you back up your Iphone/Ipad it backs up your camera roll. but when you take pictures and it uses photo stream, does that mean there are two copy's of your photos on icloud one set for photo stream and one set for backups?

    What do you mean by storage quota, does that mean i could be photo streaming about 1gb of photos and it does not get taken away from my free 5bg.

  • Why does the wheel for the apps close and how to keep it open?

    why does the wheel for the apps on the tool bar close and how to keep it open? i've checked thru all the information on your site..

    Exactly which driver did you downlaod and from where? By "GET STRAT", do you mean one of the Getting Started VIs? Error 5 means "NI-488:  Command requires GPIB Controller to be System Controller." Are you using GPIB to control the instrument? If so, what type of board are you using and which version of VISA and NI-488? If the error only occurs on a read, try issuing the query from MAX and see if the error occurs there. In a couple of the Xantrex drivers I looked at, there seemed to be some fixed delays after a write and before a read. You might try increasing those values to see if that makes any difference.

  • HT5622 Charged when I bought a free app? I bought a free app(Documents by Readdle) for free. In my account I had 6.37 but now I have 3.19!! I don't understand why because it was a free app? What do I do and how do I get my money back?

    I bought a free app(Documents by Readdle) for free. In my account I had $6.37 but now I have $3.19!! I don't understand why because it was a free app? What do I do and how do I get my money back?

    Hi caw52,
    Welcome to the Support Communities!
    The following information should help you with this:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    Judy

  • App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

    We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
    PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

    Sounds like you have a battry issue but don't want to believe it.
    If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
    BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
    Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
    Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call?  You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
    Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
    <Edited By Host>

  • How to solve this error 'This package is using an app name that hasn't been reserved for this app: "Matest"

    i already reserved app name as Ma_Test. But only one error showing "This package is using an app name that hasn't been reserved for this app: "Matest". how to solve?

    Hello,
    You need to make sure both names match exactly

  • HT204088 Hi am getting charged every month for this app what do i do?

    Am getting charged every month for this app wich i didnt authorise

    Hey Klod69!
    It sounds like you may need to report an issue with these purchases:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • The publisher of the uploaded package does not match the expected publisher . The publisher for this app is expected

    I have a Windows Phone Silverlight 8.1 project that i am trying to publish
    The publisher in the uploaded package does not match the
    expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
    I have the same Publisher Id set in the WMAppManifest file
    help me 
    thank you 

    Hi kadir u,
    >>The publisher in the uploaded package does not match the expected publisher. The expected publisher for this app is: "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
    Based on the error information, we can see that the publisher value does not have the correct one. So please try to open the Package.appxmanifest, then modify the Publisher as "CN=00000000-8F5B-44B4-BFC6-F16FB18F2358":
    <Identity Name="*******"
    Publisher="CN=00000000-8F5B-44B4-BFC6-F16FB18F2358"
    Version="1.0.0.0" />
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Can I know why iTunes charged me for free apps?

    Can I know why iTunes charged me for free apps?

    How much is the 'charge' ? You aren't charged for downloading free apps (though some then allow you to make in-app purchases in them).
    Did you add or change your credit card details on your iTunes account ? If you did then each time that you do so a small temporary store holding charge ($1 or approximate local equivalent) may be applied to check that the card details are correct and valid and that it's registered to exactly the same name and address as on your iTunes account - it should disappear off your account within a few days or so.
    Store holding charge : http://support.apple.com/kb/HT3702

  • How do I find out my serial number on my mac computer for this app

    How do I find out my serial number on my computer for this app and eventhough I had the app for awhile how do I register it?

    Find your serial number quickly

  • HT2477 Can I use Microsoft excel on iMac ? Does it cost for this app?

    Can I use Microsoft excel on iMac ? Does it cost for this app?

    Yes you can. It is going to cost around 140 USD. However there are other products out there that are free:
    http://www.libreoffice.org
    http://www.openoffice.org
    You can check those out.
    Phil

  • Design Patterns, best approach for this app

    Hi all,
    i am starting with design patterns, and i would like to hear your opinion on what would be the best approach for this app. 
    this is basically an app for data monitoring, analysis and logging (voltage, temperature & vibration)
    i am using 3 devices for N channels (NI 9211A, NI 9215A, NI PXI 4472) all running at different rates. asynchronous.
    and signals are being processed and monitored for logging at a rate specified by the user and in realtime also. 
    individual devices can be initialized or stopped at any time
    basically i'm using 5 loops.
    *1.- GUI: Stop App, Reload Plot Names  (Event handling)
    *2.- Chart & Log:  Monitors Data and Start/Stop log data at a specified time in the GUI (State Machine)
    *3.- Temperature DAQ monitoring @ 3 S/s  (State Machine)   NI 9211A
    *4.- Voltage DAQ monitoring and scaling @ 1K kS/s (State Machine) NI 9215A
    *5.- Vibration DAQ monitoring and Analysis @ 25.6 kS/s (State Machine) NI PXI 4472
    i have attached the files for review, thanks in advance for taking the time.
    Attachments:
    V-T-G Monitor_Logger.llb ‏355 KB

    mundo wrote:
    thanks Will for your response,
    so, basically i could apply a producer/consummer architecture for just the Vibration analysis loop? or all data being collected by the Monitor/Logger loop?
    is it ok having individual loops for every DAQ device as is shown?
    thanks.
    You could use the producer/consumer architecture to split the areas where you are doing both the data collection and teh analysis in the same state machine. If one of these processes is not time critical or the data rate is slow enough you could leave it in a single state machine. I admit that I didn't look through your code but based purely on the descriptions above I would imagine that you could change the three collection state machines to use a producer/consumer architecture. I would leave your UI processing in its own loop as well as the logging process. If this logging is time critical you may want to split that as well.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • I paid for this app on The Ipad. Now its free??? I want my money back!!!

    I want my money bak!!! I paid for this app already, now it is feee??? Friggin joke!!!!!! Money back please!!! As now i have to do in app purchases again!!!!!!!!

    I want my money bak!!! I paid for this app already, now it is feee???
    If you bought GargeBand already, you bought a different program, GarageBand 1.3 and not GarageBand 2.0. This is not an update, it is an upgrade, a completely new version for compatibility with the new MacOS Mavericks and GarageBand on the Mac. I'd be grateful, that this time we do not have to buy all new apps  again, only the additional content. Usually the upgrades to completely new versions have been paid upgrades.

  • Update unavailable for this app for app not installed

    I have a machine on which I keep seeing Angry Bird update
    I never installed it. Or if someone in my family installed it without my knowledge then it is a different case altogether.
    But at the moment it is not installed but I keep getting update of that. And when I click update it says Update Unavailable for this app
    How can I remove this Update Message altogether from my App Store

    Click here and ask Apple for assistance.
    (115687)

Maybe you are looking for

  • "Other" category on iTunes for iPod touch 4g

    On iTunes, the "other" category on my ipod touch summary takes up 1.6 gb of my space, and I want to reduce that. Anybody know what the "other" category means, and how I can take off the space on it?

  • Should I upgrade to Snow?

    I'm thinking in buying the Snow Leopard, but I'm having doubts about this upgrade. At this moment my Macbook pro works like a charm. Is the process of upgrading from 10.5.8 to Snow with no problems? What do I really win in upgrading? I'm a graphic De

  • Calling main method of a class

    Hi I have to call the Main method of a class in some other class becuass that class is accepting command line aurguments. I test it and everything is working fine.            String[] strings = new String[3];            strings[0] = "E:/practice.cap"

  • Set up DB Connection Pool for Oracle DataBase Using Java App Server8

    Hi, In the Admin Console of Java App Server 8, I tried to create a connection pool for the oracle database. I chose Resource Type to be "javax.sql.ConnectionPoolDataSource" and the Vendor is Oracle. So the Data Source Class Name is filled by the syst

  • WRT54G V5 Log Files

    Is anyone having any luck using the Log files, under the Administration tab, in this router? I'm trying to verify traffic is actually trying to get out to the Internet and vice-versa. Incoming log NEVER shows any info. Outgoing log sometimes shows a