Why is it playong fine in QT but not FCP

i just render a small sequence in 8-bit uncompressed. If i play the rendered Mov file in QT, it plays fine but if i import it in FCP and lay it on a sequence using the same setting as the mov ( 8 bit uncompresed ) it's jerky and often stop playback..any idea why ??? Thanks

Ok -- we'll all play "guess what I'm thinking" with you...
How many audio tracks do you have?
Look - if you've been doing this for years, there should be no reason for you to ask such an open ended question with little information...
We're not going to sit here and throw out suggestions just so you can come back with short answers... we can be short too.
Why don't you give us an idea of the equipment you're using... what exactly the uncompressed clip is... what type of project you are doing... how many effects you have on the clip... etc...
bottom line QT/Fine:FCP/Jumpy -- dude... bigger overhead?
Good luck,
CaptM

Similar Messages

  • Dreamweaver text looks fine in Safari but not Firefox NEED HELP!!!

    Dreamweaver text looks fine in Safari but not Firefox, all my text goes out of alignment and the fonts look like different sizes. Please let me know your thoughts. Here is a link to the page I'm having problems with. http://www.alexandrasantibanez.com/bio.html

    I had the same problem for days what a waste of time trying
    to figure out code... the code was fine. I was running flash player
    7.0 Upgrade your flash plugin to 9.0 and it should work fine in
    Firefox and IE. It did for me.

  • HT1364 why will my ipad2 connect to itunes but not my iphone 4s

    why will my ipad2 connect to itunes but not my iphone 4s

    why will my ipad2 connect to itunes but not my iphone 4s

  • A javaScript code that runs fine in IE but not in other plz help

    Hello friends,
    plese help me in getting the code for Opera and Mozilla browsers. The following code runs fine in IE but not in other browsers. it show titlebar in other browsers. What to do disable titlebar in other browsers? plz help
    <html>
    <head>
    <script>
    //Frameless Banner Popup
    // Set the url of the banner popup window page
    //var theURL = "index.htm";
    var theURL = "/cgi-bin/login";
    // Set the title of the popup window
    var title = "Login"
    // Set the size of the popup window
    var windowWidth = 350; // cannot be less than 100
    var windowHeight = 350; // cannot be less than 100
    //var windowWidth = window.screen.width; // cannot be less than 100
    //var windowHeight = window.screen.height; // cannot be less than 100
    // Set the position of the popup window
    var windowX = ((window.screen.width/2) - 175);
    var windowY = ((window.screen.height/2) - 175);
    // Set true to auto-center (positions will be ignored)
    var autocenter = false;
    // Set true for popup to close when launch page does
    var autoclose = false;
    var s="width="+windowWidth+",height="+windowHeight;
    var beIE=document.all?true:false;
    var done=new Object("no");
    if(autocenter){
    windowX = (window.screen.width-windowWidth)/2;
    windowY = (window.screen.height-windowHeight)/2;
    function doAgilePopup(){
    if (beIE){
    agilePopper = window.open("","popAgile","fullscreen,"+s);
    agilePopper.blur();
    window.focus();
    agilePopper.resizeTo(windowWidth,windowHeight);
    agilePopper.moveTo(windowX,windowY);
    var frameString=""+
    "<html>"+
    "<head>"+
    "<title>"+title+"</title>"+
    "</head>"+
    "<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
    "<frame name='top' src='"+theURL+"' scrolling=no>"+
    "<frame name='bottom' src='about:blank' scrolling='no'>"+
    "</frameset>"+
    "</html>"
    agilePopper.document.open();
    agilePopper.document.write(frameString);
    agilePopper.document.close();
    }else{
    agilePopper=window.open(theURL,"popAgile","scrollbars=no,"+s);
    agilePopper.blur();
    window.focus();
    agilePopper.resizeTo(windowWidth,windowHeight);
    agilePopper.moveTo(windowX,windowY);
    agilePopper.blur();
    if (autoclose){
    window.onunload = function(){agilePopper.close();}
    done="okay";
    </script>
    </head>
    <BODY onLoad="doAgilePopup(),top.window.close()">
    </body>
    </html>

    missing semicolon in end of the variable frameString ,
    better write the string in single line thats easy to find the bugs like this.
    var frameString=""+
    "<html>"+
    "<head>"+
    "<title>"+title+"</title>"+
    "</head>"+
    "<frameset rows='*,0' framespacing=0 border=0 frameborder=0>"+
    "<frame name='top' src='"+theURL+"' scrolling=no>"+
    "<frame name='bottom' src='about:blank' scrolling='no'>"+
    "</frameset>"+
    "</html>"

  • Can't FLIP a quick RENDER! Works fine in SHAKE but not to flip or Disk!

    Learning with Lynda.com!
    Part 1 has you rendering two files, one is a still image, the other a quicktime movie, I don't have the money for premium so I got my own clouds movie (.mov) and added a still plane.
    I key framed 1 - 100 and playing it back its fine in shake, but not on FLIP or DISK, its nothing but a still image. Have done it 5 times making sure that all the right buttons are on, or not, and as I said, it works INSIDE of shake but won't RENDER to FLIPBOOK!
    I don't suppose anyone wants to send me the exercise files? (on knees begging LOL) I am a member, just can't afford $300 for one pop and this is really the only program I need to learn.
    Thanks!

    Sorry if I'm pointing out something obvious that you already know. Have you checked the time range in the render dialog? Shake does not fill in the values for you automatically, and defaults to "1" so only renders the 1st frame. It needs to be set to eg "1-100".

  • Fixed headers while scrolling works fine in bids but not when deployed to reportserver

    Hi, I am using SQL Server 2008 R2 & deploying a report to reportserver with fixed headers while scrolling, this works fine in bids but not when deployed to reportserver. We are IE 9.
    Thanks in advance...............
    Ione

    Hi ione721,
    Since you have identified the 2 xml files are identical, according to my knowledge, there maybe a compatibility issue with IE 9 and SSRS 2008 R2, so I suggest that you could run the report in compatibility mode. Please make sure you have turned on Compatibility
    View in Internet Explorer 9 by following steps:
    When Internet Explorer recognizes that a webpage is not compatible, you will see the Compatibility View button on the Address bar. Try clicking it.
    When Compatibility View is turned on, the button changes from an outline to a solid color when you view the page.
    The following screenshots are for your reference:
    If you have any questions, please feel free to let me know.
    Best Regards,
    Wendy Fu

  • Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

    Why are some photos on camera roll but not in photo stream. Unable to backup as camera roll size is too big for free 5gb.

    I assume you have Photostream on, correct?
    In order for the photos to be moved into Photostream, you must exit the camera app, and be on a wifi connection.  Both of these criteria must be met before the sync occurs.

  • Why apple lie people iphone 4s arrived but not in stock...?

    why apple lie people iphone 4s arrived but not in stock...?

    Contact 3 asap you may have been frozen because of inadvertant excessive
    data use or more.
    All you can eat does NOT apply overseas
    AND if you did not enable roaming they will certainly believe your iPhone has been stolen
    and taken out of the country

  • Airplay works fine in iTunes but not from the menu why?

    Hi Guys,
    I have read so many answers to the question about Airplay not working both here and the internet.
    Can someone give me the definative answer why I can Airplay from iTunes but not from the Macbook Pro itself i.e. no menu icon or setting to mirror.
    Everyone seems to say its the age of the computer or its the firewall or the wind is blowing in the wrong direction.
    Why if I can do it oneway (iTunes), I can not do it directly?
    I am using a 2011 macbook pro 10.9.3 and a apple tv 3.
    Is there a hack or work around with out purchasing more software.
    Thanks

    Hey Beauvoir17,
    Thanks for the question. Based on the information you have provided, I can conclude that your MacBook is indeed compatible with AirPlay Mirroring, as outlined in the following resource:
    About AirPlay Mirroring in OS X
    http://support.apple.com/kb/HT5404
    AirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring when using OS X Mountain Lion or later:
    - iMac (Mid 2011 or newer)
    - Mac mini (Mid 2011 or newer)
    - MacBook Air (Mid 2011 or newer)
    - MacBook Pro (Early 2011 or newer)
    - Mac Pro (Late 2013 or newer)
    If you are experiencing issues with AirPlay mirroring, I would recommend the troubleshooting steps outlines at the bottom of the article.
    Thanks,
    Matt M.

  • Title overlay works fine on MBP but not imac. Why?

    Hello,
    I have this problem with putting a title into FCPx that happens on my iMac but not on my MacBook Pro.  I am hoping someone in here can explain to me why, and how to fix it.  These are screenshots of the issue on my iMac, as well as screen shots of what it looks like when it's on my MacBook Pro, which is the way it's supposed to look.
    The titles are .mov files with a transparent background.
    iMac view -  This is the original view on my timeline with NO title added 
    iMac view again -  This is the view on my timeline when I put the title over my video on my iMac
    MacBook Pro - It works perfectly on my MacBook Pro as can be seen here.  This is the same exact frame as it is on my iMac.
    FCPx is the most recently updated version on both.  I just really need help with figuring out why it works on my macbook pro, my husband's macbook pro, but not my iMac.  They are all the same version of FCPx.
    Thanks so much,
    K-

    You must be using proxy media on the iMac.
    The ProRes proxy codec does not support an alpha channel, so the transparent parts would be black, as you are getting.

  • LNK2019 Error, Works fine in cmd, but not visual studio

    Hello.
    I'm getting this error. I've looked online and it says this happens when something is declared but not defined, however I don't see any issues like that. The most annoying part is that it compiles fine in cmd. I'm not sure why Visual Studio 2013 is giving
    me issues
    Errors
    Error 1
    error LNK2019: unresolved external symbol "public: __thiscall Shader::Shader(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &)" (??0Shader@@QAE@ABV?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@Z) referenced in function _main
    Error 2
    error LNK2019: unresolved external symbol "public: virtual __thiscall Shader::~Shader(void)" (??1Shader@@UAE@XZ) referenced in function _main
    Error 3
    error LNK1120: 2 unresolved externals
    main.cpp
    #include <iostream>
    #include "shader.h"
    int main(int argc, char** argv)
    Shader shader("./res/basicShader");
    return 0;
    shader.h
    #ifndef SHADER_H
    #define SHADER_H
    #include <string>
    class Shader
    public:
    Shader(const std::string& fileName);
    virtual ~Shader();
    protected:
    private:
    #endif //SHADER_H
    shader.cpp
    #include "shader.h"
    #include <iostream>
    #include <fstream>
    #include <string>
    Shader::Shader(const std::string& fileName)
    Shader::~Shader()

    Hi Arend Peter,
    Since this forum is to discuss the VS IDE usage, based on your description, it would be the VC++ development issue, to help you resolve this issue as soon as possible, I suggest you post this issue to the VC++ language development forum,
    I think you would get dedicated support there.
    The VC++ forum link:
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vcgeneral
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Why does Mail open in guest account but not my account since upgrade to Mavericks?

    I've read a lot of threads but not found anything that works for me. The history is this:
    I've upgraded to Mavericks 10.9.2. Since then, Mail won't open in my own user account. I only get a very brief error message:
    Process:   
    Mail [1448]
    Path:       
    /Applications/Mail.app/Contents/MacOS/Mail
    Identifier: 
    com.apple.mail
    Version:   
    7.2 (1874)
    Build Info: 
    Mail-1874000000000000~1
    Code Type: 
    X86-64 (Native)
    Parent Process:  launchd [157]
    Responsible:
    Mail [1448]
    User ID:   
    I have gone to user/Library/Mail and deleted the contents of the folder Mailboxes + all the other mailboxes. No change - Mail still won't open.
    If I switch user accounts to guest user, Mail opens normally (sets up email accounts etc).
    Any advice would be much appreciated.

    Rebooted in safe mode, repaired disc permissions, rebooted (again in safe mode) but no difference.
    There was a bit more detail I could / should have added.
    1) Before it crashes, Mail says it is Upgrading your Mail database.
    2) I downloaded Mail update but Installer said none of the drives were compatible. (Anyway Mail works fine in Guest Account)
    3) I've been through all the tips on this post https://discussions.apple.com/message/23490745#23490745http://
    and
    looked at Internet accounts in Preferences and none of my email accounts is checked with Mail. It asks for a password for each one but when I provide it I get the message Unable to verify account name or password. And if I try and uncheck iCloud with Mail I get the message that I need to do that from within Mail. (Obviously not possible until I can open Mail).
    In Terminal tried defaults delete com.apple.mail ColorQuoterColorList but got the message that it hadn't been done.
    Tried to find Envelope.x.x files as per this fix:     Final solution: Go into ~Library/Mail/V2/Mailboxes > Delete all mailboxes. Then go to ~Library/Mail/V2/Maildata and delete 3 or more "Envelope.x.x" files > Restart Mail, and enjoy your success.     but don't have a V2 folder nor Envelope.x.x files. I do have Envelope Index file and Envelope Index - journal
    I don't suspect 3rd party applications because I think they are all available in the Guest Account aren't they?
    Many thanks for your reply though. Any more ideas?

  • Why does the counter work in MAX, but not Labview?

    Please help, I have been away from Labview for over 3 months, and I am quite rusty....
    Last year, I successfully configured NI9401 to measure period (seconds) by counting the rising edges of my sensor signal.  Since then, I have aquired a new PC, and loaded all my software into it, including the Labview VI's that successfully worked on the old computer.
    I can see the digital signal using MAX and the test panel for the NI9401, so, I know my wiring and my TTL signal is OK, but, when I try to run the attached VI, nothing happens except the error below..  How do I tell this VI to look for the signal on MOD3/CTR0 and channel 14?
    Thanks. I am sure it is a small adjustment...this worked fine a few months ago...not sure what is wrong now.
    Thanks,
    Dave
    Solved!
    Go to Solution.
    Attachments:
    continuously measure period buffered_singlechannel_forum_feb_23_2012.vi ‏20 KB

    OK, now.  Resolved the issue. The vi is fine, but, some shaky wires were identified...worked in MAX but not in the vi.  Now that the connections have been tightened up, it works for both.  Sorry for the inconvenience.
    Dave

  • ITunes/Apple Mobile Device works fine w/iPod but not iPad

    Hi. I'm getting stuck on this and would like some help to solving this problem. Basically I'm trying to sync my iPad; however, whenever I connect it, this meesage pops up: "this iPad cannot be used because the Apple Mobile Device is not started." The problem is that when I try to plug in an iPod using the same wire, it works fine, no problem, but the iPad just won't connect. I have since uninstall and reinstall all Apple components (iTunes, AMD, QuickTime, etc) and it's still the same thing...iTunes connects fine w/ the iPod, but not the iPad. What to do? Thnx in advance.
    EDIT:
    Btw, I've tried to connect the iPad while the iPod is connected, and the "Apple Mobile Device is not started" error message pops up too, which is weird, because the iPod is connected and syncing at that time...which means the Apple Mobile Device thing IS started. >.>

    The iOS devices use Apple Mobile Device Service, while older iPods use the iPod Service.
    Checkout this Apple document -> How to restart the Apple Mobile Device Service (AMDS) on Windows
    Are you able to restart the service after following the steps in that article?

  • Why is visual voicemail free for iPhone but not for other phones?

    I recently activated an iPhone on my line -- temporarily -- and found that visual voicemail was included and didn't cost a dime. Can anyone explain why visual voicemail is free for iPhones but if you want it for any other phone it bears a monthly charge?

    Also VVM is also free for everyone. The $2.99 is for the premium version. You can search the FAQ and there's a pricing list and shows what you get.

Maybe you are looking for