Why is it taking forever to move objects in AI? I am completely up to date in CC 2014

I am working on Trade Show Banners, 8' x 31".  Using linked eps files for all the images that have to go in it. If AI isn't crashing, it's taking forever for every thing I try to do!!!  So now, if I adjust kerning, I save. It takes 8-10 minutes to save. Next thing - 8-10 min to move an object. Then 8-10 min to save because when it crashes I lose all the work. This is driving me nuts. I have deadlines!

1. What OS? OS X Yosemite 10.10.2  Mac Pro
2. How much RAM? 16GB (1066 MHZ DDR3 ECC)
3. Is your Preferences > Scratch Disks set up properly? How much free space on your scratch disks? Scratch disk 1: 379.28 GB free
    scratch disk 2: 360.61 GB free
4. Are you doing any raster effects on this large document? If so, how big are they, and at what resolution? (Effect > Document Raster Effects Settings...) CMYK, 300 pip, Transp. Bkgrnd, Preserve spot colors
5. How large are the placed files, and from what source (AI, Photoshop, etc.)? Are you embedding any of the placed files, or are they all linked?  All are linked .eps files vary, from 8mg, 12 mg, 32mg, 43mg, etc. all food and equipment shots.
I appreciate any help! I update constantly and it seems that this last update has put a spanner in the works! I've read so many solutions. I use safari, not chrome...
thanks!

Similar Messages

  • I downloaded iBooks on my Ipad 2 and have a WiFi connection, but why is iBookstore taking forever to load?

    I downloaded iBooks on my Ipad 2 and have a WiFi connection, but why is iBooks taking forever to load?

    Contact iTunes Store Customer Service.
    tt2

  • Why is it taking forever for my MacBook pro to start up?

    It is taking forever for my MacBook pro to start up. It's been on the screen with the grey apple and the spinning icon for about 20 minutes now. I tried holding down the shift button when powering up to reboot in safe mood but that is taking forever as well. Any suggestions?

    Reinstall OS X without erasing the drive
    Do the following:
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
    Reinstalling Lion Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Continue button.
    Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

  • Why is GarageBand taking forever to download?

    Hey so I bought a new macbook pro (13 inch) online off of ebay. It is a 2012 edition(md101/lla). It didn't come with GarageBand all that so I had to go to the App Store and click on Purchases and install it from there. Now here's the problem. I opened it and got a window saying I don't have a complete installation of GarageBand and thus they have to bring things up-to-date and download the missing pieces. According to the progress bar, it says it will take 29 more hours although idk if I can depend on it cause at one point it will say about 26 hours ,then at another point it will say about 30 hours...
    Why is this taking so long? Is this normal? Do I have to really wait this long? Is there anything I can do to speed this up? Btw i'm running on 10.8.2 if that helps.

    Probably because it is the largest download you have ever attempted.  The Mavericks download is something like 5.4 gigabytes.  It takes a while to complete.

  • Why is it taking forever to export a short video?

    hi everyone,
    currently pulling my hair out trying to export a 13 minute video i recently made. By choosing the option youtube simply took 24 hours or more to reach 6% of completion. After watching a youtube tutorial on the compressor i spent £35 on buying it in order to compress my video once i had exported it. The tutorial advised me to bounce my project off as a master file to import into compressor and upload the compressed version on to youtube. The master file option is also taking forever to export from FCPX. Please can someone tell me what im doing wrong,
    Mitchell.

    What are your system specs? Where do you store your projects and events (libraries, if you're on 10.1)? 
    What kind of media are you working with – the formats of both your video and audio clips? Does the project use a lot of photos?
    Russ

  • TS1424 Why is it taking forever for an installed CD to import to my iTunes library?

    Why is it taking so long for me to import a CD to my iTunes library???

    http://support.apple.com/kb/HT3603

  • TS1702 Why is it taking forever for facebook to update on my iphone

    Why is it taking so long for my apps to update or load on my new iphone?

    I can not see you cant read?????
    You wont find support here. Go talk to Facebook.

  • Why is it taking forever for my pages to load and then if I search the rainbow wheel come up and goes on forever?

    The rainbow wheel pops up and goes on and on everytime I try to type in a search or if I'm on a page and move around it, it starts up and goes on and on.

    How did you get 10.6.8 on a MacBook Pro Retina?  
    Fix your signature please.
    steelec wrote:
    The rainbow wheel pops up and goes on and on everytime I try to type in a search or if I'm on a page and move around it, it starts up and goes on and on.
    Does this only occur while the computer is connected to the Internet or also while it's offline?
    Run through these two links
    Step by Step to fix your Mac
    Why is my computer slow?

  • Why is it taking forever to transfer tunes from itunes to my ipod classic, I have over 6500 to copy and the current rate is 2 tunes per minute

    I am just copying tunes from itunes to my ipod classic, there are 6675 to copy and the present rate of transfer is 2 tunes per minute, which means that it will take over 55 hours at this rate,
    This has never happened before previously it took next to no time so what is happening?

    That show that your original library is damaged and needs to be repaired.  Apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Why is it taking forever to download my .zip file from "DPS App Builder?

    I have created my first single edition app with App Builder, but when I go to download the .ipa or .zip file I end up on a screen that says "Downloading The_Insider .zip, this popup will disappear once complete. It has been on that screen for three hours. What am I doing wrong?

    Yes, that's a normal size. It shouldn't take more than a few minutes to download that file. I would close App Builder, re-open it, and then try again. If that doesn't work, uninstall/reinstall App Builder and build a new app.

  • HT1386 Syncing taking FOREVER

    why is it taking forever to sync my ipad? its been syncing for about 45 mins I cant eject or anything is it ok to disconnect from computer??

    You're welcome.
    You won't lose everything.
    All iTunes content on your iPhone - all music, movies, tv shows, and 3rd party apps should be in your iTunes library on your computer.
    All photos and/or videos in your iPhone's Camera Roll should be imported by your computer as with any other digital camera. Did you read the info included with the link provided? If so, have you imported all photos and/or videos from your iPhone's Camera Roll followed by deleting the photos/videos from the Camera Roll after the import process is complete? If so, any change with your iPhone's backup time after doing so?
    Contacts, calendar events, and Safari bookmarks are designed to be synced with a supported application on your computer, so none of this data will be lost either.
    If your iPhone's Camera Roll is empty and no change with it empty, you can try deleting the existing backup followed by manually creating a new backup. Go to iTunes > Preferences and under the Devices tab select the current backup followed by selecting Delete.
    With your iPhone connected, right click on your iPhone under Devices in the iTunes source list and at the menu window that appears, select Back Up to create a new backup.

  • Okay so I just got a new MacBook and I'm setting it up. I decided to not download all of my files to iCloud drive and its taking forever to load to the next page. Is this normal for it to take so long? After all I didn't even download my stuff?

    why is it taking forever to load!?

    The files you are loading into the new computer are by wi-fi? If you have no other option
    that may be OK but slow. A faster method would be Ethernet cable from internet router
    or modem, instead of wireless. Most of the setup process can take some time.
    What are these files? Where are they now?
    Do you have a backup on-site, & not online?
    Did you check to see if the operating system was updated as part of the setup before use?
    The Software Update can locate later parts to the as-shipped system, that may be needed.
    Other upgrades or new apps are through the Mac App Store, some through App Store, etc.
    As part of the setup, you could use a migration assistant if you have a backup from the old
    computer or have other files saved in an external hard drive to import.
    Hopefully your process won't be drawn out too long...
    Good luck & happy computing!

  • Why is it taking so long to down load a movie

    Why is it taking so long to down load a movie on apple tv and my iPad

    from where?
    if it's from itune store then it depend on your internet speed if
    from itunes on the computer then it depend on the speed of your LAN

  • Why is it taking so long to process a movie?

    i downloaded the movie of two minds it took almost two hours to download and  its taking over  a half hour to process. why is it taking so long?

    how do you expect us to know? contact Apple directly and ask them.

  • Why is "move object to section Master" is dimmed?

    I import a tiff image to a page layout document.
    I select it and go to Format->Advanced ->move object to section Master
    the submenu selection is dimmed.
    Can anyone help?

    DennisG wrote:
    I can think of two reasons why it would be dimmed out: 1) you didn't select the object; and 2) you're working in a page layout document, where each page is its own section. Since the purpose of a section master is to repeat an image on every page of a section, having one-page sections makes section masters unnecessary and, therefore, unavailable as an option.
    I apologize but it seems that you are wrong
    The User's Guide states:
    +Using Master Objects (Repeated Background Images)+
    +You may want to add watermarks, logos, or other background images that appear in+
    +the same spot on every page of your word processing _*and page layout*_ documents.+
    +These repeated graphics are called master objects.+
    And I checked that I may perfectly do the trick in a Page Layout document : I tested with the "Tokyo Letter"
    From my point of view the OP has just inserted an inline object, not a floating one !
    Yvan KOENIG (from FRANCE dimanche 20 avril 2008 19:24:01)

Maybe you are looking for

  • Can not see ODS infosource in the system

    Hello, I am unable to see Infosource of my ODS under the infosources tree. This is only happening in DEV and PROD. In QA system i could see it and also create additional infopackages. The bottom line is I want to be able to create extra Infopackages

  • Process Chain error while creating index on cube

    Hi All, I have two process chain P1 daily(except sunday) and P2 weekly(sunday), both have same process, i.e. cube C1 is loaded with same infopackage in both infopackage. Now, on saturday after laoding the content index creating process on cube c1 is

  • Credit memo for asset with depreciation posted

    HI, There is requirement to pass a credit memo for an asset. The asset was purchased on 01.04.10. And have been depreciated till 31.05.11. Now the client want to pass credit memo for the full acquisition value. My issue is when I am passing the entry

  • How to Format Line in UML

    Hi All, Please see the screenshot below, I insert an association line between Student class and Classroom class, I want to change the line style. Such as begin arrow type or dash line. I set them via Format Shape TaskPane. But no working. Why? If my

  • Adobe thinks I live in different country! Not able to correct them! Help!

    While trying to purchase creative cloud I'm informed that it's not provided for my country. My country? I live in the US. I go to my account information to check my address and all I see under "country/region" is uneditable text saying, "United State