Why is it taking like 2-3 mins for just one song to go onto my iPod?

I thought my iPod was fixed completely last night, when I was on the phone with apple for 2 hours. My iPod was "corrupted", it wouldn't open in my iTunes and it kept freezing it. We tried changing the disk letter, blah blah. We finally solved the problem by uninstalling iTunes and reinstalling it. Then it finally opened in iTunes..restored and everything. I'm trying to put music on it and it's not cooperating with me.

There are 2-3 things that could be happening..
Some folks on here might say that you are experiencing the corruption problem with the classic... Which may be possible...
There may be something happening with your iPod's HDD causing it to check the drive each time a new files goes in
Third, you didn't describe where your music was stored... If its not on your computers C drive it may take it a few minutes to travel off of an external or netowrk drive.
Additionally, remember that the iPod's HDD (based on the model you own) is not a HDD like the ones in your computer... They have a slower transfer rate...
While your waiting for it, tell us more about your setup so that we can better help you identify what's going on...

Similar Messages

I have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i have 3 different itunes accounts and would like to combine them into just one for all my devices, a macbook pro, an iphone 4S, an older IPOD, and a ver sion one Ipad. how can i do this on all devices ?

i had one for a long time, then when i got the ipad i didn't realize they would all still work under one so i set up the second one on that
then when i got the new iphone i put in the info for the first and main one from my mac pro and it would not work at all, and i knew it was right, then it asked me to create a new one or i couldnt finish the setup
hence why i have 3 now
hard to believe you cannot combine into one
oh well, i will just make them all accessible for all 3
thanks

EAM ID based or Role based? Why settle for just one?

G'Day All,
I've raised a question in the following blog, however I would like to open it up to other people as well so they might get something out of it and in the process might share their own thoughts on the matter at hand.
ID-Based Firefighting vs. Role-Based Firefighting
So this is where I am at this point:
From what I can gather so far, my understanding of EAM ID/ROLE based is as follows:
- Id Based: Logs in using own U.ID and through GRAC_SPM accesess FFID from the GRC Server and logs into the system assigned to them (ECC, SRM, CRM etc)
Only one user at a time can use a FFID.
Firefighter need not exist in every system assigned to them due to central logon however they need to exist in the GRC system
Knows exactly when FFID is being used as he/she has to login so has a psychological effect (good thing)
Better tracking of FF tasks - Specific log reports with Reason Codes. Bonus point from Auditors!
Two Log ins so potential to commit fraud. (1 action using own UserID and 1 action using FFID)
Could be hard to track and find out when a fraud has been committed so can be a problem with auditors.
      ID Based -> GRAC_SPM : TCode for Centralised FFighting -> You will see FFIDs assigned to you
      ID Based -> /n/GRCPI/GRIA_EAM : TCode for DCentralised FFighting -> You can see the FFIDs assigned to you
- Role Based: Logs into the remote system only using U.ID, so everything gets logged against that one ID.
Multiple users can use the FFROLE at once.
Firefighter has to exist in every system assigned to them - so multiple logons.
Hard to differentiate between FF tasks and normal tasks as no login required So easy to slip up
Time consuming to track FF tasks - No Specific log reports. No Reason Codes
     R.Based -> GRAC_SPM : TCode for Centralised FFighting -> You will see FFROLEs
     R.Based -> /n/GRCPI/GRIA_EAM : TCode for DCentralised FFighting -> Not applicable so wont work
So based on this there are pros and cons in both however according to SAP only one can be used. To me personally, it makes more sense to get the best of both the worlds right? So here is my question why can’t we just use both?
    . Really critical tasks -> FFID
    . Normal EAM tasks -> FFRole
Alessandaro from the original post pointed this out:
"Per design it isn't possible to achieve both types of firefighting at the same time. It's a system limitation and hence to configurable."
Well this is what I can't seem to get my head around. For a FFID, there is a logon session so it has to be enabled and as far as I can tell there is no way around it.
However for FFRole, there isn't such limitations/restrictions like starting a separate session. FFRole is just assigned to an end user for him/her to perform those tasks using their own user ID.
So in what way is it different from any of their other tasks/roles, other than the fact that they've got an Owner/Controller assigned to the FFRole? and
What is stopping us from using it when ID based is the default?
If I were to do the following does it mean I can use both ?
    . Config Parameter: 4000 = 1 (GRC System) -> ID Based
    . Config Parameter: 4000 = 2 (Plug-In) - > Role Based
Please excuse me if my logic is a bit silly, Role Based firefighting is only done on Plug-in systems so the following should work just fine:
   . Config Parameter: 4000 = 2 (Plug-In) - > Role Based
However for ID based, it is a Central Logon, so the following is a must:
    . Config Parameter: 4000 = 1 (GRC System) -> ID Based
Which means both ID/Role based can be used at the same time, which seems to be working just fine on my system. Either way I leave it you experts and I hope you will shed some light on it.
Cheers
Leo..

Gretchen,
Thank you for thoughts on this.
Looks like I'm failing to articulate my thoughts properly as the conversation seems to be going in a different direction from what I am after. I'll try once more!
My query/issue is not in regards to if/what SAP needs to do about this or why there isn't more support from Companies/Organizations and not even, which one is a better option.
My query is what is stopping us(as in the end users ) from using both ID/Role based at the same time?
Now before people start referencing SAP documentation and about parameter 4000, humour me with the following scenario please. Again I would like to reiterate that I am still in the learning phase so my logic might be all wrong/misguided, so please do point out to me where I am going wrong in my thought process as I sincerely would like to know why I am the odd one out in regards to this.
Scenario
I've created the following:
FFID
FFROLE
Assigned them to, two end users
John Doe
Jane Doe
I set the Configuration Parameters as follows:
IMG-> GRC-> AC-> Maintain Configuration Settings -> 4000:1 - ID Based
IMG-> GRC (Plug-in)-> AC-> Maintain Plug-In Configuration Settings-> 4000:2 - Role Based
User1
John Doe logs into his regular backend system (ECCPROD001)-> executes GRAC_SPM-> Enters the GRC system (GRCPROD001)-> Because the parameter is set to ID based in the GRC Box, so he will be able to see the FFID assigned to him-> and will be presented with the logon screen-> Logs in -> Enters the assigned system (lets say CRMPROD001) At this point the firefighting session is under progress
User2
Jane Doe logs into her regular backend system (ECCPROD001) -> (can execute GRAC_SPM to check which FF Role has been assigned to her but she can see that in her regular menu, so there is no point) -> Executes the transactions assigned in FFROLEThis is done at the same time while FFID session is in progress
So all I want to know is if this scenario is possible? if the answer is No, then why not?
I physically carried out this scenario in my system and I had no problems(unless I am really missing the plot here), which brings me back to my original question: Why settle for just one?
Again to reiterate I am not getting into the efficacy or merits of this or even if one should use this. Just want to know if it is possible/feasible or not.
So there you have it. That's the whole enchilada(as they say there in Texas). I tried to word my thoughts as concisely as I can, if there are still any clarifications, more information you or anyone else reading this would like, please do let me know.
Regards,
Leo..

A friend of mine downloaded an app from the internet onto my iPod Touch 4 so I could play pokemon on my iPod, I deleted the app but now iTunes and the App Store won't open, they say that the certificate for this server is invalid. What should I do?

A friend of mine downloaded an app from the internet onto my iPod Touch 4 so I could play pokemon on my iPod, I deleted the app but now iTunes and the App Store won't open, they say that the certificate for this server is invalid. What should I do?

Try:
Why does my iPod 4th generation say the certificate for this server is invalid when trying to access iTunes? I've never had an issue until this recently.

Why can't I set a relative date for a recurring event in calendar on my ipod touch?

why can't I set a relative date for a recurring event in calendar on my ipod touch?

Because The Calendar app does not support it. There are apps in the App store that do.

Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

Why cant i use a bought call-tone bought through I-tones for calling tones for just one of my contacts?

What makes you believe that you can't? To set a custom ringtone (or SMS tone) for a contact, go to that contact entry, tap the Edit button in the upper right. You can then edit both ringtones and SMS tones for that contact.

Why can't I send just one song off of an album as a gift?

Why can't I send just one song off of an album as a gift?
iPad 2, iOS 7.0.4

You'll need to use iTunes on your computer to be able to send a single track. From an iOS device you can only gift entire albums.
Regards.

When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

When I import some of my cd's they have multiple album images but have just one song from the cd because of a guest performer. How do I keep the cd from "blowing up" like this? eergh

for purchases from the iTunes store do this:
connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
for everything else check out this post by Zevoneer.

HT1848 how do I transfer a book I have bought from my computer to my daughter's new ipad mini? - just one book

how do I transfer a book I have bought from my computer to my daughter's new ipad mini? - just one book

By syncing my friend.
iTunes 10 for Windows: sync
http://support.apple.com/kb/PH1533
iTunes 10 for Mac: sync
http://support.apple.com/kb/PH1059

If I do a creative cloud membership does it give me two computers and other devices like an ipad? Or just one computer one mobile device?

If I do a creative cloud membership does it give me two computers and other devices like an ipad? Or just one computer one mobile device?
Thanks

You can have functional installations on two machines. The machines have to meet the system requirements for the software.

WHY WONT A FUL ALBUM COPY TO MY I PHONE JUST ONE SONG FROM THE ALBUM

WHY WONT A FUL ALBUM COPY TO MY I PHONE JUST ONE SONG FROM THE ALBUM

Please fix your CAPS lock key.
Typing in all CAPS indicates yelling... there is no reason for you to yell at us.
Is the content in question selected to sync?

HT4743 why is it taking freeking hours to load my purchased show from my computor onto apple tv?

why is it taking freeking hours to load my purchased show from my computor to my apple tv so i can watch it?

It shouldn't.
If internet playback is fine it's likely a problem with itunes or security software on teh computer as good internet playback performance would suggest the LAN is ok.
If you're seeing a spinning icon on AppleTV restart it, itunes andf your router - doesn't alweays work but often does.

Why can't I just load all my music onto my iPod

I hesitantly got iTunes match and only because songs were not loading on my iPod because apple thought that I stole them. Some of those songs were loaded from CD's years ago and the CD's have long since been discarded or sold, some of those songs are original recordings I made (using my mac and apple software not less). They appear now with iTunes match, but my library won't load onto my iPod or phone and I'm not always around wifi (or wanting to use my data) to stream playlists…. why is it apple assumes we are all able to get onto wifi all the time in order to run our devices. I just want my music and my playlists to load onto my devices to I can play my music without having to select each individual song and loading it on while I'm on a wifi network. I would also like my songs to be intact, most stop half way through which makes for awkward moments when you're listening to the road trip mix you made and the songs stop halfway through.
iTunes match is a misfire and I'm sad that I'm paying for a service that made listening to music on my device a pain. This stuff used to be easy and intuitive and now its just frustrating.
fix this and help us out would ya?

The sync is one way - computer to ipod. The only exception is itunes purchases: File>Devices>Transfer Purchases

I feel like I got ripped off with one song, they won't resend it.

I feel like I got ripped off from i tunes, i ordered three songs July 4th and only 2 and d1/2 came through.
The one I am missing totally is My Prayer with Josh Groban and Charlotte Church. I only have one minute of it and then it stops.
How cheap can a company be???
It will make me think twice from now on.
I did notify them more than once and they sent me a note with a bunch of sites to read.\
I was almost completely finished with one site, but I do not know what i tune number I have,5, 6, 7, 8, 9 10 etc
That should not be an issue, I have been taken advantage of and that is small on the part of APPLE not to resend it with no other beggin on my part.

Calm down. Not sure why you are so bent out of shape.
Delete the song and redownload it:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Why wont my imessage work for just one contact

For some reason my iPhone wont let me imessage with just one of my contacts... it works with all the other ones but that contact stays regular sms text! Tried rebooting the phone and turning my imessage on and off... dont get it!

I have the same problem as SWatson12, and the person I'm texting has an iPhone 4S like me and is in my house - so there isn't a question of coverage area or type of phone.
But iMessage still works with this person if I text via my Mac or iPad.
This has been a problem since last night. At first, when I updated to 10.8.2, it worked great!

Why is it taking like 2-3 mins for just one song to go onto my iPod?

Similar Messages

Maybe you are looking for