Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help. Is th
Why is it that it would take a very long time [if ever] to change or adjust the tempo of a loop in the audio track when i set it to adjust regions to locators? Until now the spinning wheel of death is still very much spinning. thanks for any help.
Is there another way to adjust tempo of loops the faster way, any other technique?
No clue why the final processes have suddenly started to take so long. Two things I'd try: a) capture from an older tape to see if some problem with the new tape is at fault. And b) check the health of your RAM and the hard drive.
The red frame sounds a bit like a glitch we used to have in OnLocation (actually in its predecessor HDV Rack) which was caused by a partial GOP. But that was a product of HDV Rack recording from the live video stream. It turned out that HDV cameras intentionally interrupt the data stream for an instant upon starting to record--specifically to avoid recording a partial GOP to tape. So my gut says that the tape has partial GOPs at the points where you stopped/started recording.
Similar Messages
-
On the most upper left of the Title Bar (the part where the x box is on the right side) where the Firefox icon should be (on the upper left corner) I have a printer icon instead. Why did that happen and how do I change it? Thanks for any help.
I don't actually have an answer for you, but ditto on changing things that aren't broken. Drives me crazy!!
-
My Macbook was stolen. I noticed the following morning that it was locked, so I 'clicked' play sound, and erase at next internet connection. I received notice that it played the sound, but not that it has erased. Wondering if Apple and/or iCloud tracks the last IP address that my stolen macbook connected to the internet. Thanks for any help!
Hi SteveC619,
Welcome to the Apple Support Communities! I’m sorry to hear about your Mac. If you’ve erased the Mac, all requests for notifications when it is online will be cancelled. Your next best step may be to report the property as lost or stolen with your local law enforcement. For more information, see the following resource:
If your Mac is lost or stolen - Apple Support
http://support.apple.com/en-us/HT6318
What if my Mac is shut down or offline?
If your Mac is turned off or offline, you can still use Find My Mac to request a notification when it’s located, or lock or erase your Mac remotely. The next time your Mac is online, the actions take effect. If you remove your Mac from Find My Mac when it's offline, your requests are cancelled.
3. Report your lost or stolen Mac to local law enforcement. They might request the serial number of your computer. You can find this information on the original box or receipt you received when you purchased your Mac, or on Apple's My Support Profile site if you registered your Mac.
- Matt M. -
Once 10.9.1 is loaded onto my MacBook Pro and it has accessed all my files; is there anyway to back out of the relationship? I don't want my data on iCloud - how do I make that happen? Many thanks for any help.
Sorry but I know of no way of not backing up for a PC.
-
Have Photoshop Elements from 2001. Got new computer with Windows 7 Professional 64 bit. It won't run on my new computer. What version is MOST SIMILAR to the old version I have, that will run on W7P-64? Thanks for any help. Popjer
You should probably just download the trial version of pse 12 and see if you can live with it.
Download a free trial or buy Adobe products | Adobe downloads
That being said, have you tried to install pse 1 on your computer?
How much free space is on your hard drive?
Do you have Internet Explorer 10 or 11?
Pse 1 can run on windows 7 x64, provided certain conditions are met. -
I have an old iMac for 2002....it's the rounded type that has an attached monitor. The software is way outdated (OS X 10) and I only really use now to access 3,000 plus songs and old video of the family. Both the keyboard and mouse no longer work. Am I able to use any keyboard/mouse and plug in using USB? Thanks for any help!
Most any USB mouse or keyboard should work. Borrow one if you can and just plug it in.
If the USB circuits are at fault then you can access via Firewire Target Mode with another Mac in order to get at the files.
http://support.apple.com/kb/HT1661
Another alternative would be to remove the hard drive and use a USB adapter to access it as an external drive.
http://eshop.macsales.com/item/NewerTech/U3NVSPATA/ -
Hi, i have edited a clip in hd with final cut, now I need to export it in 2K format. anybody knows how i can do it in FCP? in internet I found only few info about 2K format: no more than frame size. nothing about codec or similar. thanks for any help.
SoCal thanks for the attention,
sorry for having wrote the question directly in the subject, but first i wrote it by text edit then copied it, but in the wrong place too.....
coming to my question, timeline settings are:
as it is a commercial promo that must be projected in a multiplex cinema, the 2K format is needed.
I've heard about transcoding services, and they are very expensive.
so i'm looking if there is a way to do everything by fcp.
the project will be delivered as SD DVD for archive pourposes and as a single file for the projection or eventually transconding.
p.s.: sorry for my english, i'm from italy: had my last english lesson 35 years ago! -
Can anyone tell me why my photo stream is not loading all 1,000 pictures onto my new iphone 5c? i backed up my old phone onto the mac and plugged in my new phone then hit backup. it only gave me 100 pictures????? why?
thanks for any help!Because photo stream photos only remain in iCloud for 30 days, allowing enough time for your devices to download them. Only shared streams keep photos in iCloud indefinitely. Your other photos are probably older than 30 days and are no longer in iCloud.
Also, photo stream photos aren't included in your backup, only camera roll photos are. If you want to include photo stream photos that are not already in your camera roll in your backup, you have to save them to the camera roll before backing up. -
A movie I bought a while ago will no longer play, instead it just shows a black screen and no audio. All of the other movies in my library play fine. Any ideas as to whats going on or how to fix it? Thanks for any help.
Hi 22chill,
I recommend that we delete and re-download the movie from your purchase history:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Thanks,
Matt M. -
My wife and I each have our own email address and calendar. These are on one IPad. The Ipad has a single ICloud account.
What's the best way to backup both Calendars, etc? Does ICloud automatically back up every account on the same IPad? (I checked ICloud, but I could only find my stuff.)
Thanks for any help!
AlanFirst, you need to understand that there's a difference between "syncing" and "backup". Backup is the saving of content and settings, where syncing is the bidirectional transfer of content for an account to a web-based server (like iCloud, Gmail, Yahoo, etc.)
If you see your calendar in your iCloud account, that implies that you have set up your iCloud account to host (sync) your calendar, and perhaps contacts, email, and notes. An iCloud account can only sync one user's information at a time so it is intended to support a single user. You can have more than one iCloud account, and you can even have more than one iCloud account on the same device (but one has to be primary, and the secondary iCloud has limited capabilities), but a single iCloud account only supports a single user's content.
Backup is the saving of your device's content and settings to use in case you need to recover these things, but you can't see the contents of your backup (just the size and device name). You can backup more than one device to iCloud and you can backup to iCloud or you can backup to your computer, or both (one at a time though, you have to choose).
So, if your wife has her own email and calendar she can certainly do that in parallel to whatever account(s) you have for email and calendar. But if you have only one iCloud account then only one of you can use it for email, calendar, etc. But the backup of these accounts is really just a backup of the device's settings that link the device to these accounts. For example, if she uses Gmail then the backup of the iPad only backs up the fact that your iPad is set up to use her account, it does not backup the account itself (the content of her account is saved and preserved on Google's servers, not your device's backup).
Does that make better sense? -
I cannot use a website I need to use, with Firefox 5.0. So, I need to uninstall and go back to 3.5 or 3.6. Please advise. Also, my control panel locks up since Windows Explorer has pbms. Which is why I am using Firefox instead. Thanks for any help!
''I figured it was going to be FAFSA causing your problem.''
Install Portable Firefox 3.6.x to your hard drive for that one website. It won't affect your current Firefox installation at all. <br />
http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 -
I can not get Adobe Flash Player to update on my Mac. It keeps telling me to close Safari even though it is closed. I tried every thing on Adobe's site to fix the problem with the same results always. I went to Mac's site as well and was told to go to Adobe for a solution. It worked fine since a new Mac in Feb. ,but it will not update now so no Flash Player ay all. Thanks for any help.
[discussion moved to Installing Flash Player forum]
-
my iPad mini is stuck on the Apple symbol. I have tried a reset and it shut down. When I turned it back on, the problem persists. Thanks for any help.
If the reset doesn't help, the next step would be to restore the device to factory settings using iTunes on a computer. If you can backup the iPad first, do so and then restore to factory settings. If it all works out properly, you can restore the backup after you finish. If you didn't or can't backup, the iPad will be erased when you restore to factory settings.
Use iTunes to restore your iOS device to factory settings - Apple Support
IF you can't restore that way, the next step would be to try using recovery mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
does anybody know how i can find out the answers to my security questions or change my security questions? thanks for any help you may be able to give me.
Didn't the link to contact the iTunes Store staff in the 'Additional Information' section of that article work for you? If you don't already have a valid rescue email address, only Apple itself can reset the questions; nobody on these boards can.
(90863) -
can i use my imac g5 just as a display monitor if i buy a 13" macbook pro? the g5 screen is larger. can it hook up to the laptop? thanks for any help!
You need to use a product such as ScreenRecycler to do that. All of those products work over a network connection; direct video in isn't available on an iMac G5.
(72069)
Maybe you are looking for
-
Export a PDF file to Excel with adobe Distiller 9
How i can export an file with several pages to an excel file? The right click have 3 options ( Copy as Table, Save as table ans open table in a spreedsheet) and but they are limited for just one page.
-
Converting to PDF crashes Word
I'm using Acrobat Pro 9 and Word 2007. I have a document of approximately 160 pages with a Table of Contents, Figures, Tables, and lots of text. Every time I try to convert it to PDF, Word crashes. I have other similar documents that convert just fin
-
Can ATG 10.0.3 run on windows 7 enterprise edition of OS ?
Hi guys, I'm having some trouble with ATG, when i try to run atg CRS demo in windows 7 ent edition i get these errors. i'm thinking this is not starting some of nucleus in my PC. When i tried it on a Windows Server OS, it started normaly. (i mean wit
-
B2B Document Editor License Key Issue
Hi, I have downloaded Oracle B2B Document Editor from OTN and installed the same without any error but while trying to use it to generate B2B guideline files (ecs and xsd files), at the very first step we are getting the error saying - *"This feature
-
I can't turn it off. The backlight will go out, then as soon as I lift my finger, it lights up again. I imagine it will turn off when the battery dies, but I'd like to figure this out. I can't reset because I can't turn it off.