Why is it that now when i click on a link and i mean every link i am asked by firefox to allow this. is this a new feature cos if it is its damned annoying

in firefox now every link i click on always goes to allow to go to the link. Is there a way to disable this cos if its a new feature its damned annoying.

In firefox, click on tools, then options, then click on tabs and tick the last option in tabs that say "When I open a link in a new tab, switch to it immediately".
I hope this helps.

Similar Messages

Why is it that now, when I click on a link for a website I've saved, it does NOT show the URL in the address bar? I can't drag it to an email to share the link.

Why is it that in these newer versions of Firefox (I have 21.0), when I open a link that I've saved, it does NOT display the URL in the address bar any more?
I can't drag and drop the link into an email, and I can't see the actual web address I'm connected to for reference OR for security purposes. Why was this changed?
It becomes necessary to reveal the properties of the URL link I've saved, using the Windows "Properties", then copying and pasting the URL into the Firefox address bar, before I can do anything with it.

No changes have been made and no problem with extensions has interfered with the URL appearing in Firefox before. Only with the last few new versions of Firefox has this cropped up. Also, the link opens correctly - it just doesn't display the URL in the address bar, instead it just reads (in gray) "Search or enter address." How could another extension interfere if Firefox is the sole program associated with .htm, .html files?

When I click on a link within a Web page, Firefox just spins until I reload the new page.

When I enter a new URL or select a bookmark, Firefox loads the page promptly. When I click on a link within that page to go to another page, the Firefox tab green spinner often just spins and spins. It either takes a very long time to load (2 or more minutes), or never finishes loading. It's usually a greater problem when I "Open a link in a new tab". I can usually make the new page appear by reloading, either clicking the red X and the circular arrow, or Ctrl-F5, etc.

Try the Firefox SafeMode to see how it works there. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I am trying to configure my SCXI-1540 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?

I am trying to configure my SCXI-1540 w/1315 card for excitation voltage and frequency using MAX - but it is not giving me that option when I click on the card and then properties, am I looking in the wrong place?
I have LabVIEW Express 7.0 Professional - SCXI-1000 Chassiss - along with SCXI-1112, and SCXI 1520/1314 - cable to the PCI-6052E is attached to the 1520 card.
MAX says it recognizes all the cards in the chassiss.

Jeremy, Thanks for the reply.
I tried to set up the system as DAQmx.
I had MAX auto-detect the set-up - and it recognized all the cards - but did not select the 1315 accessory on the 1540 card - I had to do that manually - but in the configuration section I would select the accessory and it would deselect itself. I had to get out of the set-up and then right click on the 1540 card and click on the "Accessories" tab and select the 1315 terminal block that way.
It didn't seem right that the system should behave that way, but I pressed onward.
I then tried to create a new DAQmx Task
When I create new DAQmx task and then click on Analog Input no "Position" Tab appears for me to select, all I get are:
Analog>>Voltage
Analog>>Temperature
Ana
log>>Strain
Analog>>Current
Analog>>Resistance
Analog>>Frequency
Analog>>Custom Voltage with Excitation
Do you think there might be something wrong with either my hardware or perhaps my configuration that is not allowing it to recognize the 1540/1315 in DAQmx?
I had included the system report of what programs I am using, etc. as attached file nireport.txt
After the DAQmx did not work I tried installing everything as Traditional DAQ and it did let me set-up the 1540 Card with Excitation Voltage and Frequency and gain - I then went in to the VI that I had built and tried to use the Express DAQ Assisant to read the channel that I am connected to on the 1315/1540 - when I try to use DAQ Assistant it gives me an error saying that "Device not available in NI-DAQmx. It is possible that the device is being use by traditional NI-DAQ"
Which I guess it is since both configurations are now set-up in MAX.
I would PREFER to use the DAQmx set-up, but I am confused as to WHY it won
't come up with
Analog input>>POSITION>>LVDT
When I try to create a new DAQmx task.
Thanks for the help so far! As you can probably tell I am new at this.
Ryan
Attachments:
nireport.txt ‏2 KB

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

I changed my mailto: to yahoo mail but now when I click an email link it has the mailto: and the subject both in the To: part of the email. I have to delete the incorrect data out. How can I fix this?

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

I just upgraded to Firefox 3.6.13 this morning and now, when I click on a link in an email or webpage, it won't open Firefox. How can I get this option restored in Firefox so I don't have to copy and paste the link?

I just upgraded to Firefox 3.6.13 this morning and now, when I click on a link in an email or webpage, it won't open Firefox. How can I get this option restored in Firefox so I don't have to copy and paste the link?

See this lnk for a fix, it worked for me!
http://www.pcworld.com/article/200103/fix_outlook_general_failure_error_for_email_links.html

I installed 4.01 and now when I click on a link in the menus or the seach window, the whole firefox browser window jumps

This happens when I click on most menu links. For example, if I click on Help and select "About Firefox" the entire browser window jumps. The same goes for if I click on the default search box or on the Google Toolbar search box.
If I click on something out of Firefox, such as my desktop or an open program, it jumps when I click the Firefox tab on my task bar to return to Firefox.
When I click a shortcut link, such as in bookmarks, it does not do it.

For those of you who have tried to clear this problem up with virus scans, various malware scanning programs, tdss rootkiller, etc....I have another possibility. I found another thread on this very forum where someone suggested the problem was in the router...specifically, there were manually entered DNS addresses in the router setup. I logged into my router (192.168.1.1) and sure enough, there were DNS addresses loaded and it was setup to use those DNS addresses. I simply clicked on the option to pull the DNS addresses automatically from my ISP, changed the password, and the problem was gone.
Thanks to cr85tx for the solution!!!
https://support.mozilla.com/en-US/questions/697011?page=1

I don't want Firefox to be my main browser or automatically open when I click on a link from my emails, how do I disable this?

When I click on a link from my emails it opens automatically through firefox. I want to disable this feature as I would like to go back to Chrome. I don't want to uninstall Firefox all together but I don't want it to be my main browser either.
Thank you

The only way to have such links not open Firefox is to set another browser the default browser.
That MozillaZine Knowledge Base article shows how to set another browser like IE as the default browser.
See Setting default browser manually:
*http://kb.mozillazine.org/Default_browser

Why do i get redirected when I click on search link If I hit the back button and click on the link again It was allow me to go there

I use Google to search I click on the link and I get redirected to some other page I click on my back button and re click on the link and it will the allow me to go the link. it does this to me 40% of the time and I know the links that I'm click on a a known good link cause I used them before I just have not save them to my bookmarks

Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

When I click on any link in different site "example: facebook n emails etc" nothing opens in new tab its just blank page?

when i am on anysite and they have links to different pages so when i click on link to open it just opens blank page nothing comes so recently i been copying link locations and the paste it on url and press go but i cant keep on doing it.

Go to Tools->Options->Apps
Here you should see two columns: Content Type on the left, Actions on the right.
Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
Always Ask - Firefox will ask each time: What do you want to do with this file?
Save file - Firefox will save this file to your computer
Use - Firefox will give this file to the program to open it
In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
Tools->Options->General->Download

How do I fix in Windows 7 x64, when I click on a link in a web page Firefox displays in the lower left - javascriptvoid(0).

When I go to sites were I click on a link that will open a java script window, Firefox doesn't open the window. If I go to the same site with IE 8 and click on the same link it will open the java window. I have uninstalled java 6.3.2 and reinstalled 6.3.2 to see it that was the problem. I have also uninstalled Firefox 3.6.3 and reinstalled Firefox 3.6.3 to see if the installation had become corrupt. That has helped in the past, this time it has not.
== URL of affected sites ==
http://

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

When I CLICK on a link on a web page, firefox dos lot load the page in a new window. All other browsers load the page under the link. I do not have "Block poups enabled".

When I navigate to a web page that has a link, such as the link to a data sheet and click the link (usually an insert page), firefox does nothing.

Does the new window have a media player in it or use the Flash plugin for any other purposes? If so, it could be the protected mode bug described in this thread: [https://support.mozilla.org/questions/955659 Opening New Windows and Shockwave Flash]. There are some workarounds listed there.
Let us know whether that helps.

When I click on a link the address does not display in the location bar in the new tab. Which makes the back/forward button and refresh buttons unable to be used

When opening a link any link from firefox address does not display in the location bar. Even when navigating forward from there the address does not show back/forward button and refresh all rendered unable to be used

Do you have that problem when running in the Firefox SafeMode? 
[http://support.mozilla.com/en-US/kb/Safe+Mode] 
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: 
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Why is it that now when I try to print a label all the words run together creating a blob of ink?

After recent updates to iTunes when I print a label for a cd cover the words all run together. Is there a setting that I can use to help with this problem? It's not the printer because I can print anything else without incident.

Thanks, I'll try it. Meanwhile, I called the sales guy at the store where I purchased my laptop one month ago and asked ''him''italic text'''' about it and he advised me to just download Google Chrome and skip the many updates I would have to do to Firefox and I did. I still like Firefox, but Chrome isn't bad and my videos PLAY!

Why does fireofx shrink sometimes when i click on a link

When ever i try to open lets say a gift from Mafia wars the screen shrinks till i x out of that link??

See:
* http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
* http://kb.mozillazine.org/JavaScript#Advanced_JavaScript_settings

Why is it that now when i click on a link and i mean every link i am asked by firefox to allow this. is this a new feature cos if it is its damned annoying

Similar Messages

Maybe you are looking for