Why is it that when i go to print a illustrated file shapes that aren't visible are showing up on the print?

HELP

Do the shapes have bitmapped effects on them such as drop shadow or outer glow, if so
Print >> Custom >> ,move slider to the left to rasters.

Similar Messages

Why that when I record a video in my iPhone 4s then I will transfer it to my laptop, the video is in slow motion? Please help so that I can use always my video recording feature. Thanks!

Why that when I record a video in my iPhone 4s then I will transfer it to my laptop, the video is in slow motion? Please help so that I can use always my video recording feature. Thanks!

Video is synced from the computer to the iPhone via iTunes. You need to load the video into iTunes, make sure it is iPhone compatible before you do that, and once it is in iTunes, then sync to the iPhone.
Never said what computer OS you were using. Also, the computer processor, amount of RAM can make a difference with HD video.

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out wh

I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.

Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara

How would I make it so that when "deleting" an image I can make it so that the delete key does it or a button I put on the application?

How would I make it so that when "deleting" an image I can make it so that the delete key does it or a button I put on the application?
I want it so that I can use either a button on the designer window or the delete key. I know how to do the or part but the trouble I'm having is coding the button in.
if (LastImageClicked != null && (e.Key == Key.Delete || Button))
This is the code that I have in the format I'm looking for I just don't know how to do it. Thanks for your help!

There are a number of things which are unclear about your question.
I'll tell you one way to approach this though.
Handle Window.PreviewKeyDown.
<Window
Window.PreviewKeyDown="Mainwindow_PreviewKeyDown"
Code behind
private void Mainwindow_PreviewKeyDown(object sender, KeyEventArgs e)
if (e.Key == Key.Delete)
File.Delete("p001.jpg");
I don't know enough about what you mean by LastImageClicked but you need some way of knowing which path you are going to delete.
Then you might well have a problem if it's showing in an image control.
You will need to copy the picture off disk into a new bitmapimage object.
If you just do
<Image Source="p001.jpg"
Then that image will grab the file and you won't be able to delete it - you'll get an error.
In my experimental code p001.jpg is set as content copy always so it ends up next to the exe in the bin when the solution compiles.
You would probably want a full path to a file there.
Hope that helps.
Recent Technet articles:
Property List Editing;
Dynamic XAML

Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls

Hello, I have an iPhone 4s, I noticed that when I am on a call (Phone) and I am done and I go to hang up, the iPhone is stuck on the screen and can not get new calls or call to a new call

Is there a case on the iphone?
If so, then remove it and see if that solves it.
Otherwise, make an appointment at the genius bar.

I tried to create a new google calendar in ical, but they did not show up, I tried this several times. Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can i clear them from this list?

I tried to create a new google calendar in ical, but they did not show up, I tried this several times.
Now when I sync my iPad via iTunes all these failed attempts are showing up under the ical sync list in iTunes, how can I clear them from this list?

See https://bugs.downthemall.net/ticket/2147
Google Search Bug
Reported by: openid:nathan wride Owned by:
Priority: major Milestone:
Component: Polish/Usability Version: 2.0.10
Keywords: Google search instant save bug Cc:
Operating System: Windows
Description
Hi Guys
I have found a bug/annoying thing that occurs frequently on google. When searching, DTA trys to download the search...
I'll try to attach a screenshot.
Attachments
[https://bugs.downthemall.net/attachment/ticket/2147/Screenshot.png Screenshot.png] Download (113.0 KB) - added by openid:nathan wride 4 weeks ago.
The screenshot that shows the bug.

We use a doc template to create a purchased part spec document and then save them as pdf formatted files. These part spec documents are also appended with the datasheets for these purchased parts. When we want to update/revise the document, is there a m

We use a doc template to create a purchased part spec document and then save them as pdf formatted files. These part spec documents are also appended with the datasheets for these purchased parts. When we want to update/revise the document, is there a method, using Acrobat, to make those updates to the pdf, or must we go back to the doc template and basically generate a new document?
Also, our resulting pdf documents aren't searchable. How can we generate pdf documents that are searchable? I may want to search for a part value or name within the body of these pdf documents, but currently can't do that...very inconvenient.
Can you assist?

Not totally sure about the search issue. A lot depends on how you created the PDF and what is in the datasheets you attached (like are they graphics?). The doc portion should be searchable as long as you used print to the Adobe PDF printer or PDF Maker. For your use, it may be that the print is adequate. However, the result should be searchable (unless maybe you had a form with filled in fields and created the PDF with PDF Maker. I think the form data may be retained in form fields and the fields are not searchable. In that case, a print might be a better procedure. (it would help to know the versions of WORD and Acrobat as well as the exact process you used to create the PDF.)
If the appended data sheets do not change, then you might try opening the original PDF and then using Replace Pages to replace the file created from the DOC file.

Why are PDF attachments are showing up on the body of emails, instead of as actual attachments?

PDF attachments are showing up in the body of my emails rather than as attachments. I need to be able to open them in other programs, eg notability, mad can't do that if they're not real attachments. On my other devices they're showing up at regular attachments.

When a PDF that has only one page is attached to an email the Mail app will display the conte tents of the PDF in the body of the email. But the PDF is still an attachment. Tap on the PDF to open in iBooks or forward it to your computer to open it there. Again, the one page PDF will display the contents of the single page but the PDF is still an attachment and can be used like any other attachment.
When a PDF that has more than one page is attached to an email the Mail app only displays the icon for an attachment.

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

When I double click a CS3 Illustrator file in finder, it opens in preview, not in Illustrator CS4.

When I double click a CS3 Illustrator file in finder, it opens in preview, not in Illustrator CS4.
Is anyone having this same issue?
Is there a quick and easy method to convert to CS4.
I have 4000 ads, 3,000 are from freelancers that are CS3 or CS2.
Jim Etheridge

Select a couple of .ai files and Get Info on the files. Go to the Open with line and set it to Adobe Illustrator. When it ask if you want it to do the same for this file type answer yes. The OS is probably seeing the file as a PDF and Preview by default is set to open PDFs.

I have a Lexmark printer which is a little old. So when i connect my iphone to it via the USB cable my printer doesn't recognise it. If i bought a bluetooth adaptor for the printer would i be able to print photos via bluetooth?

I have a Lexmark printer which is a little old. So when i connect my iphone to it via the USB cable my printer doesn't recognise it. If i bought a bluetooth adaptor for the printer would i be able to print photos via bluetooth?

The only way to print from an iPad is to have a printer that supports AirPrint. Here's a link to an Apple support page on AirPrint.
http://support.apple.com/kb/ht4356
AirPrint is way to print wirelessly via Wi-Fi but it requires that the printer supports AirPrint. The iPad cannot use Bluetooth to print and it will not print when connected via USB.

If i buy an unlocked iphone 4s in the usa will it work in Australia? and will the warranty be valid in astralia as i have been told that apple have a world wide after sales service but also been told warranties are only valid in the country of purchase

If i buy an unlocked iphone 4s in the usa will it work in Australia? and will the warranty be valid in astralia as i have been told that apple have a world wide after sales service but also been told warranties are only valid in the country of purchase? Cheers

Each country is a separate business. If Apple in Australia fixes a phone purchased in another country it reduces their profit. The good news is that Apple stores will frequently replace phones purchased in other countries under warranty, but they are not required to do so. Some countries are more liberal than others. India never does, for example.
Why don't you just buy it in Australia? The price difference can't be that great.

Iphoto gives message "no images were selected" when hit print button. Yet the the images are clearly selected in the print window. I've printed hundreds of images without a problem before. Iphoto 6.0.6, MAC 10.5.8

Iphoto gives message "no images were selected" when hit print button. Yet the the images are clearly selected in the print window. I've printed hundreds of images without a problem before. Iphoto 6.0.6, MAC 10.5.8, Suggestions?

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

Is it possible for deleting all the apps from the appstore which are showing up in the apps not on my phone section. Before I was able to delete them from itunes but now I am not able to find that option.

You can hide them via your computer's iTunes : iTunes Store: Hiding and unhiding purchases - Apple Support
The 'x' might not show on their top left corner (it might be invisible), but clicking where it should be should hide the app.

Why is it that when i go to print a illustrated file shapes that aren't visible are showing up on the print?

Similar Messages

Maybe you are looking for