Why is it when i record a voice track, as soon as i add auto tune to it the voce goes glitchy?
Why is it when i record a voice track, as soon as i add auto tune to it the voce goes glitchy?
Which auto tune plugin are you using and without wishing to sound rude.. But do you know how to use it correctly?
What you are describing sounds like improper use of an auto tune plugin to me.... Time for you to check out any tutorials on YouTube for your plugin....
Similar Messages
-
Why won't my iMovie record my voice over? I have a previous voice track that I recorded yesterday that worked, but today it won't. I tap the necessary place each time, and tap it again to stop recording...has anyone ever had that problem before?
Hi
Will You try
A. Do this Voice over in a brand new Project
and if this doesn't work
B. trash iMovie pref and try again
I have a very faint memory of problem when adding two or more voice over to one project - but it can all be just a bad dream. (It's a function I never use - I use a miniDV Camera or other recorder to do my narrative - then import this as .aiff audio and use this in my movies as any other audio without any problems - so it's a totally different way to handle audio in all)
Yours Bengt W -
I am currently using an ipod touch 3. When i record in voice memos with the apple earphones(with an inbuilt mic) i can see on the screen that its recording;
but when i hear it, its just a long beep. Need some help!Does the mic work for other apps like Voice Control?
Does the mic work OK in other devices?
Have you tried it with another mic?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I'm in cycle mode, and 'merge' is clicked in preferences. However, when I record, my previous track data keeps getting overwritten. Does anyone know what I'm doing wrong. Interestingly, I can still see the data in the region.
jamestait wrote:
when I record, my previous track data keeps getting overwritten.
since you didn't specify, are you recording in a single take?
http://www.bulletsandbones.com/GB/GBFAQ.html#multipassrecording
(Let the page FULLY load. The link to your answer is at the top of your screen) -
When I record an audio track using Logic Pro X, there is a visible waveform which appears as I record. When I stop recording, the waveform disappears and becomes a straight line. It also disappears from the track edit window. But the sound is still there. How can I stop the waveform from disappearing? And can I do something to view it after it has disappeared? Anyone know the anser?
In Logic:
Preferences/Audio Set Recording Delay to 0 <zero>
This should always be set to zero unless a specific set of circumstances exist and you're audio drivers do not report position correctly.
On occasion, usually when importing a Logic 9 project, Logic-X randomly changes this to a negative/positive number. It's actually a bug in Logic, as it should always display the waveform. -
When I plug my ipod in I am able to add song to it but the tab that says "on this ipod" no longer shows up so I cannot remove things from my ipod or anything like that. How do I change this weird setting? On other computers this shows up fine so it is clearly a problem with itunes and not my ipod.
-
I have an iMac and my camera is a Canon T4i. when i went to edit a video i had made i couldnt open the video on imovie. like it wont show up or anything not even under last imported. which should work. why??
Hi bubblegumprincess,
If you are having issues importing video from your camera, you may find the following article helpful:
iMovie '11: Import video
http://support.apple.com/kb/PH2114
Regards,
- Brenden -
No Great Solution for Record Multi-Voice Tracks and Edit for Mac? :(
Let me see if I've finally got this right.
I've got FinalCut Studio Pro which comes with SoundTrack Pro.
I've got Logic Express.
SoundTrack Pro cannot record from different channels from my Mixer, but it can edit pretty well and apply effects, such as Normalization, Silences and whatnot.
Logic can record from different channels from my mixer but has no editing capabilities, except Garage-band-like and even there, GB seems to offer more. That is there's no normalization or other things.
Okay, I accept that. But what I don't get is that in order to do something as simple as Record a podcast that has a Host on mic and 1 or 2 Skype callers coming into a Mixer (Mackie Onyx) and that mixer is routed to the Mac. In order to record each person on a different track, I have to:
Load Logic and record the tracks individually.
Export the Tracks as individual audio files.
Import them into SoundTrack Pro and edit them there.
Export them from SoundTrack to disk.
re-Import them into Logic (or Garage Band) and export them ("mixdown") as MP3 (SoundTrack won't export as MP3).
Wow, that's very unexpected.
If I'm missing something, please let me know. This seems like a lot of "make fit" just to emulate what can be done in Adobe Audition on the PC. (Sadly, Audition doesn't run on Mac.)I suppose my question is more along the lines of what solution (I've purchased them all) allows you to Record and Edit multiple spoken tracks of audio?
I've purchased:
SoundTrack Pro
SoundBooth
Logic Express
Audacity
and of course I've upgraded to iLife 09.
If one of these tools could allow you to select a section of audio from 1, 2, 3, or all tracks and delete it with a "Ripple Delete" option, then I'd be a happy guy.
Right now:
GarageBand doesn't allow you to delete and shift-left "ripple delete".
As for Logic, I don't see ripple delete either.
SoundTrack does do this but it only allow me to edit one Track at a time--open them all, but edit one, then the other, then the other. Lots of flipping around.
With Audition (which is limited to Windows) I can select a section of 1, 2, 3, or all tracks, and delete that section, ripple or not.
FYI: "Ripple" is a Final Cut Pro term.
To be honest, no that I think about it... FinalCut Pro may be the best solution. Load everythign into it as separate tracks and have at it--at least it does it.
Remember, I'm not a musician, nor do I record music, only audio for podcasting. (but don't equate "podcasting" to Video-podcasting as most people do).
Anyway, my solution will be to load Virtual Box on the Mac. Record using Logic (which did a great job of recording onto multiple tracks) and then bring those AIF files into Adobe Audition under Windows in VirtualBox--or perhaps on a Networked PC.
Of course the other solution (and perhaps less painful) would be to simply abandon the Mac entirely and move all this stuff onto the PC and only use the Mac for FinalCut Pro work. What a huge disappointment that would be. -
Hi when I stream video content to my Tv using Apple tv from my Ipad3 I find the Ipad goes to sleep after 2/3 minutes and disconects, the only way I have found to stop this is to continually tap the Ipad screen but there has to be a simpler method/ any help would be most welcome.
Welcome to the Apple Community.
Contact the developer of the Air Video app. -
When I click on itunes store it displays it for a few seconds and then the screen goes blank?
When I click on the itunes store the info appears for a couple of seconds and then the screen goes blank. I never had this problem before any ideas?
same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.
-
Why do I hear an echo when I record my voice?
I just set up Logic Pro, and I can hear my voice. However, I hear an echo through the headphones coming from the MBox interface. There is probably a simple explination, or setting to adjust, but for the life of me I can't find it. Anyone have any suggestions?
classictales wrote:
I can set it down to 32, and the latency is less, but still very detectable. I record audiobooks, and I really need to hear what I'm sounding like. Am I just out of luck, using the Avid MBox? Is it just not robust enough to work with Logic Pro for some reason?
Normally, 32 would be undetectable as that's very low latency, are you using any plugins at this time? If so, what ones? -
The syncing was perfectly in time with the rest of the song. I just came back to start working on it again, and it's completely off beat. What gives?
Also, I'd forgotten about this problem until just now, when I extend a loop (for instance, to play 2x instead of just one) it plays a phantom 3rd time. What I mean by this, is there's no track to tell garage band to play it a 3rd time, but it does anyway. If I copy paste the loop, it doesn't do it. I've got no idea what to do with this one. I'd really appreciate a quick response as I'm in the middle of a recording project :/
Thanks muchly
BrianHello Brian,
The syncing was perfectly in time with the rest of the song. I just came back to start working on it again, and it's completely off beat. What gives?
this may happen, if you accidentally turn on Auto Quantize for the track in the track editor, also "follow tempo and pitch" may cause it. Have you checked the settings?
As to your strange loop: is it a software instrument loop or a real instrument loop you are talking about?
If it is a software instrument loop you can look at it in the track editor and delete any extra beats that are revealed by looping. That sometimes happens if there are long notes at the end of the loop.
Léonie -
How do you CONCURRENTLY monitor while recording a voice track?
I want to use Garageband for recording hypnosis sessions. I connect a Plantronics USB Mic headset to the computer and record into that (and can hear through it too), but want ALSO for a client to be able to hear through a SEPARATE set of headphones - plugged into the headphone jack (or somehow).
Problem is that the headphone jack of the MAC is disabled by the use of the other USB headphone being used for the recording/monitoring.
How can I get this to work? People MUST be doing this.
Thank you!
Martin
Intel iMac 20" Mac OS X (10.4.8)You can't do it the way you want to, GB supports a single output device only.
You'd have to use this Headphone Splitterplugged into the headphone jack on the Mac. -
That's really annoying, because I can't put an effect in the second track, once that the part of the first track that's together will be changed too. And it happens with a third track, and so on, the other tracks will be together with the track i just have recorded.
If anybody could help me, I'd be really grateful.
P.S.: it only happens with the audio recorder, and it didn't happen before.I'm using GB 1.4 for Ipad 4, my IOS is 6.1.3, and the only mic is the one of the Ipad.
That's exactly the point: I'm recording the second track and the audio of the first one is appearing in the background, but the music is only being played through the headphones, and there is no way for the audio recorder be listening to it.
The first track i just sing with the guitar, then I tried to put a solo and backing vocals and this started to happen...
Thank you for the attention! -
So.....deeply....disappointed by Lion...
It honestly gets in the way of getting things done.
When was the last time you had an upgrade, in any program or OS that caused an immediate productivity drop?
Mail windows, when adding a new address, pop under to become the lowest window in the stack...before you are done composing...
no extra clicks..just adding ONE character to the actual address bar does it.
Trying to add files to an online content management system is hard...it's hard because when you attempt to add the file, it disappears from
the list, so a search must be conducted...oh not a search of your hard drive...no...it has to include ALL FILES and that takes a while, showing
files totally unrelated to what you need or in whatever that view is, showing everything from movies to documents, to a whole range of other stuff
that is irrelevant to what is being sought.
I can get used to the disappearing icon tool bar...but the message threading in Mail is so strangely bad it's hard to describe. So you send out an email,
and it had 5 points...but that was 3 emails before...A reply comes in addressing those 5 points but saying something like ..."I disagree with point number 4"
Unless you have total recall the thread shows you only incoming mail and the LAST most recent folded up message you sent. You are forced to go digging
into sent mail to see what that point you made 8 days eariler actually was...
I am pleased that I don't have to have Launchpad (honestly the silliest 'feature' I've ever seen on a computer) in the dock and see no point in the juvenile Mission Control (the naming scheme is odd and reminiscent of Junior Spaceman...how ironic that we end America's manned launch capability at the same time as Launch Pad and Mission Control, both throwbacks to the 60's are added to an OS). In any case both are virtually useless tools. One, replacing the mildly useful Spaces and the other just genuinely useless.
I'm going to give Apple until the second bug fix...but I can tell right now that Snow Leopard was a far more robust OS. The thousands of posts about this may rise to the level of AntennaGate...I hope so...It seems the only way to get Steve (for whom I have now honestly lost respect for the FIRST TIME) to address the issues is to embarrass the company publicly. Lion is a broken system, poorly conceived...and proof that the Apple methodology of no widespread user testing can and does fail. This needs to get fixed. Soon.It seems to have something to do with profile manager.
I get stack traces in the "system messages" logs for the "Server" application, grrrr.
I'll get that info and attempt to submit a but report tonight.
Maybe you are looking for
-
About a year ago - I rented a few movies, and I didn't have enough room to move them to my ipad at the them. Whenever I sync my ipad from here on out, the movies continue to try to download, I have deleted them from the download queue, but they are
-
Release for blocked invoices (Ref: Q4-6)
Dear Sirs, After executing the u201CRelease for blocked invoicesu201D using transaction MRBR, the u201CManual Blocku201D indicator can be released in Invoice Header u2013 Payment tab. However, the indicator was still checked in Invoice Item(s). Even
-
REG: Creating customer stock for different material codes has an single set
Hi FRIENDS, we are purchasing finished items from our vendor in numbers (Eg. Item Number 1 to 6 (all different items and having different item codes)) and selling it to our customer in a set ( 1 set contains all this 6 items and we have code for thi
-
Frequent/periodic import with Import Server
Hi everyone, I just read that the MDM "Import Server" allows for doing frequent/periodic imports. It was also stated that this frequent/period import only works with importing files. And furthermore, that the reason for this restriction lies in MDM's
-
Having my Mail account update when I make changes on Gmail
I use mostly my Gmail account by signing in the Gmail web page. I have set up so my Gmail account is synced with my Mail account on my Mac. But when I delete messages when I am on the Gmail page, it doesn't delete the same emails in the same account