Why is it when I use light leaks in after effects why does it stop When I'm in the middle of a ram preview?

Why is it when I use light leaks in after effects why does it stop when I'm in the middle of a ram preview? also any idea on how render as well and and how to increase ram?
Please answer me back when you can
tthanks

FAQ: Why does RAM preview only play part of my composition?
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC) | After Effects region of interest
Mylenium

Similar Messages

CS 6 locks up when encoding using modified files from after effects

I have not had any problems until I started trying to use a green screen, which has turned out to be a major pain. Ultra key did a good job, but I kept being told the after affects does a better job. My computer is a PC has 32 Gigs of ram a 4 gig video card, I7. I also just downloaded all the latest updates. I imported an AVCHD file after shooting a 30 min lesson on green screen. Had to do a lot of editing to get all put together so there were lots of cuts and I had alot nested sections so I can resize myself with the background to keep the perspective correct. After I had decent success with keying, though I wish it were better, I tried moving each indivdual video clip over to after effects to key in there. It looked like it might have been a little bit better than the using ultrakey. I tried serveral different turtioals, but finally found one that seemed to work pretty good. (BTW if you have a favorite turtorial that you like on keying, please share.)
Anyways, after taking forever to get all these clip edited in after affects, I wanted to export my completed video so I could see how well it worked. I never got the the chance because no matter what I choose under MPG2 it would lock up around 8%. Even when I tried to get to encode a 2min section of the video, it still locks up. The only way to get out of the program is to force it closed. As I searched for answer to this problem, someone suggested holding he shift key down while you open CS6, but that did not help. BTW the same file exports fine as long as I do not send any of the footage to after effect
I hop you guys can help because it would be nice to be able to try and use after affects as well so I can at least see if the final result of the keying is better or not.

I failed to mention that I tried this on another computer as well with a completly different lesson. This time I brought the whole footage in to afteraffects and did the keying and then went back to CS6 and tried to render it, and it locked up my second computer the same way.

When I try to install CS3 After Effects, it tells me I'm not connected to the internet.

Any ideas on how to resolve this? Thanks

Okay - thanks again for helping! I'm running an older Mac (see attached "About this Mac" screen grab). And. I've tried connecting with both Safari 5.0.6 and FireFox 3.6.28
This is a previous copy of AE that my boss gave me (since we no longer use it at work) - and as far as I can tell it's the ONLY version that will run on my box.

Render files from After Effects inserts do not reload when starting Premiere Pro (CS6)

Hi there,
When I have an insert from After Effects in Premiere Pro, and when I render these parts in the sequence, everything is fine untill I restart Premiere Pro: the render files do not load. Checking the cache directory however, they do exist! Anybody knows how to solve this issue?
Thanks for yor response, Pieter

I failed to mention that I tried this on another computer as well with a completly different lesson. This time I brought the whole footage in to afteraffects and did the keying and then went back to CS6 and tried to render it, and it locked up my second computer the same way.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.

Red Hat Enterprise Linux Test Page - why am I directed to this page when I go to a specific website. It does not happen when I use other browsers so there is not a problem with the website.
Just started happening yesterday.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
Do you see any prefs related to that knoxnews.com site on the about:config page if you enter that URL in the Filter?
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Why does audio stop when pavilion 23xi sleeps (using Windows 8)

why does audio stop when pavilion 23xi sleeps (using Windows 8)?

Hello again @st3lla,
I can understand the fear of messing up a computer when I first started seriously working on computers back in the early 90's I had to format and re-install my operating system twice a day for quite a while before I figured out a very important step (at least important for me), and that was after I made a change to my computer to restart it. This way if I messed something up I only had to undo one thing and not 50 because I went wild on it. lol
Anyways, do not be afraid of your computer all you need to do is learn that step, how to keep your personal items backed up and then of course how to re-install your computer back to factory and you can always start over with a fresh build.
On to your questions:
Q - What are the steps to ensure that all HP updates are done.
A - Simply review the HP Support document: Using HP Support Assistant (Windows 8) and it will guide you through the process.
Q - What are the steps to ensure that all Windows updates are done?
A - Simply review the Microsoft Support document: Windows Update: Frequently Asked Questions and again you will find answers to this question. (***Note: Do not worry if the document refers to Windows 8.1 it is only an upgraded version of Windows 8 and the steps are the same)
I am also including a Windows Support document: Install the latest Windows 8.1 Update, which will guide you through how to install the Windows 8.1 update on your computer.
And finally, to put your mind at ease I am providing you with two important HP Support documents: Backing Up Your Files (Windows 8), and Performing an HP System Recovery (Windows 8), which will provide you with all the instructions you need to backup your personal files so you do not loose them if you ever do mess up the computer, as well as provide you with instructions on how to put your computer back to how it came from the factory.
Please re-post if you require additional support. Thank you once again for your post on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Hello apple I have the problem with my iPhone and my friends have this problem too. My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it bu

Hello apple
I have the problem with my iPhone and my friends have this problem too.
My iPhone have the problem about calling and answer the call. When I use my iPhone to call I can't hear anything from my iPhone but the person that I call can answer it but when answer both of us can't hear anything and when I put my iPhone to my face the screen is still on and when I quit the phone application and open it again it will automatic call my recent call. And when my friends call me my iPhone didn't show anything even the missed call I'm only know that I missed the call from messages from carrier. Please check these problem I restored my iPhone for 4 time now in this week. I lived in Hatyai, Songkhla,Thailand and many people in my city have this problem.
Who have this problem??

Apple isnt here. this is a user based forum for technical questions. The solution is to restart, reset, and restore as new which is in the manual after that get it replaced for hard ware failure. if your within your one year warranty its replaced if it is out of the warranty then it is 199$

When I use Mail and want to paste an emailadress with a right mouse click in the adres field this doesn't work, ofcourse cmd V works. How can I solve this

when I use Mail and want to paste an emailadress with a right mouse click in the adres field this doesn't work, ofcourse cmd V works. How can I solve this

YAY! That did it.
Thank you so much.
And a Very Happy and Prosperous New Year to you!
bonnie

After Effects - Multiprocessing not allowed even when a Proxy is used?

Hi everybody!
 I have a composition (Comp1) that uses an effect which doesn't allow multiprocessing (e.g., Lens Blur) -- this I understand.
 Comp1 is used inside of Comp2. When I pre-render Comp1 and use that render as a proxy for Comp1 inside of Comp2, I still can't use multiprocessing. This is the confusing bit. I'd think since the Lens Blur effect isn't actually being rendered, it shouldn't give me any guff.
 Alas, it does. Anyone else run into this? Is there a workaround, or is it a bug/oversight by our friends at Adobe?
 Thanks in advance as always -- this forum is a great resource!

Hi Dave,
I appreciate your help, but I think I'm still missing something. When I set a proxy movie for my Comp1, come render time, it should never look inside Comp1 at all — it should just use the proxy movie. The LensBlur effect is not applied to Comp1 itself, it's used INSIDE Comp1.
To what end would AE look inside the real Comp1 when it's been assigned a proxy movie?
--Rob
Rob LaRose systems administrator
imaginary forces | 530 west 25th st | new york city | p 646.486.6868 | f 646.486.4700 | www.imaginaryforces.com
From: Dave LaRonde <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 4 May 2011 16:20:44 -0400
To: Rob LaRose <[email protected]<mailto:[email protected]>>
Subject: After Effects - Multiprocessing not allowed even when a Proxy is used?
Typically, a proxy is a low-resolution substitute for the real image to make AE work a little faster, right? When AE renders, it doesn't render the proxy, it uses the high-resolution real image, right? The same thing is happening in your project.
If it doesn't impact your work to use a lower-resolution substitute for your comp 1, I'd suggest not using the substitute as a proxy.
If full resolution matters, make a full-resolution prerender.

When we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/828024]''
when we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

See:
*https://developer.mozilla.org/en/Firefox_4_for_developers#Miscellaneous_DOM_changes
*http://www.cssplay.co.uk/menu/tablescroll.html
A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum. 
The helpers at that forum are more knowledgeable about web development issues. 
You need to register at the mozillaZine forum site in order to post at that forum. 
See http://forums.mozillazine.org/viewforum.php?f=25

When i use Firefox and do a Google search, find what i need and click on the link I keep getting automatically redirected to another search site

When i use Firefox and do a Google search, find what i need and click on the link I keep getting automatically redirected to another search site called http://www.scour.com
Can someone tell me if this is a problem with Google or Mozilla? or both? or neither?

This type of behaviour can be caused by malware. Try running several malware scanners. It is best to run several as each will pick up things that the others miss. Some scanners you can try are:
* [http://www.malwarebytes.org/mbam.php Malwarebytes]
* [http://www.superantispyware.com/ SUPERAntiSpyware]
* [http://www.lavasoft.com/products/ad_aware_free.php Ad-Aware]
* [http://www.microsoft.com/windows/products/winfamily/defender/default.mspx Windows Defender]
* [http://www.safer-networking.org/en/home/index.html Spybot S&D]
This link may help - http://deletemalware.blogspot.com/2010/02/remove-google-redirect-virus.html
If the above malware scanners do not find any malware or can not clear it, you should consider posting in one of these forums for specialized malware removal help:
* http://forums.spybot.info/
* http://www.spywarewarrior.com/index.php
* http://forum.aumha.org/
* http://www.bleepingcomputer.com/forums/
* http://www.spywareinfoforum.com/

HT3205 I have 7 lights on my macbook. What does it mean when the first 5 light up when I click the button?

I have 7 lights on my macbook. What does it mean when the first 5 light up when I click the button?

Run an Apple Hardware Test (extended version):
http://support.apple.com/kb/ht1509
Ciao.

After Effects Warning: A problem occurred when processing OpenGL commands

Hi There Fellow Adobe After Effects Users.
Please could some one help assist me with the following error i am getting.
I bought a template and needed to do a logo animation reveal. It was done using After Effects CC for PC.
AE had to then convert it to Mac which did so successfully. I was able to modify, add my logo and render out.
The following day i opened the file again and it gave me the follwoing error:
"After Effects Warning: A problem occurred when processing OpenGL commands"
What is confusing to me is that this issue would normally appear if my graphics cards did not support OpenGL, and it would not have opened in the first place if it was not supported.
My graphics card is a - ATI Radeon HD 5770 1024 MB - running Mavericks OS. So i know that this card does support GPU acceleration.
Please could someone point me in a direction that will fix this.
Thank you so much

Thank you for the update Mylenium.
If I look at my display info, the card says OpenGL engine. Does this mean anything?
If it's not supported, then what's the point in purchasing a Mac If you cannot use AE's full capacity. Mac doesn't put Nvidia cards in there machines and on the Adobe website, ATI cards ate not listed; but in the same breath it says that most ATI cards that have come out in the past 5 years are supported. Surely Adobe and their technicians must have spoken with Mac technitions.
I am considering to buy the new Mac Pro; but am definitely going to change my mind if I cannot use AE's full compatibility. I don't see why spend so much cash if the cards aren't great.
Please could you then tell me what functions to switch off in the project file. I'll get the guy whom I bought the template from to switch of those functions.
Thank you.
Have a great day

Long pause for render to commence when render button is clicked in After Effects

I am using after effects on a mac. When I go to render my composition and click on the render button it can take up to 10mins for after effects to actually commence rendering. I have purged all the disk memory and cache which doesn't have any effect. It has only fairly recently started to do this. I'm not sure if there is a setting that has turned on in the preferences or what?
I called up customer support on Friday 13th and was told i would be getting a call back the same day after being on hold for over 30 minutes. I never got a call back or response!
Can anyone shed some light on this?
Thanks

No effects used on the composition. System info,system preferences MP info and render settings can be seen below.

Artifacts when I import .avi file to After Effects (and Premiere)

Hi,
I'm having some issues with After Effects that I can't figure out. I've got a video file in .avi that loads and plays fine by itself, but when I import it to edit in After Effects 5.5, I get strange artifacts during playback, and they even translate to the final export. I get the same issue when I try to import and render in Premiere. I have the sequence matching what the video file is, and even right clicked the file,and interpreted the footage for the project to match the video file to be sure, but with no successes at figuring it out. Can anyone tell me what I'm doing wrong here?
I get the same issue regardless of me being on my desktop or laptop. I'm using Windows 7 on both computers.
Per the questions I should ask:
What exact version of After Effects? Include the minor version number---e.g., After Effects CC (12.2.1) or After Effects CS6 (11.0.4). Do not just say "After Effects with the latest updates" or "After Effects CC"; give the specific version number. 10.5.0.253
Have you installed the recent updates? (If not, you should. They fix a lot of problems.) Yes
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac". Windows 7
If you are getting error message(s), what is the full text of the error message(s)? No messages.
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking? Importing and test ram preview and or rendering.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time? First time i've tried this.
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number and sizes of connected monitors, number of disk drives, and how any external drives are connected. Intel i5 2500k 3.3GHz, 8GB ram, 64b OS, 2 monitors, 3 hard drives. AMD Radion 6900
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)? 13.12
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)? No
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime". .avi
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2". yes, 7.7.5
What other software are you running? none
Do you have any third-party effects or codecs installed? none that I know of.
Are you using OpenGL features in After Effects? I think so, it's enabled.
Does the problem only happen with your final output, RAM preview, or both? both
Are you using Render Multiple Frames Simultaneously multiprocessing? no
Are you using the ray-traced 3D renderer? no
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help. 2014-11-13_1514 - Tetra84's library
Here is a screenshot of the issue that I'm talking about:
glitch - Tetra84's library
2014-11-13_1514 - Tetra84's library

See this thread on the Camtasia forums in which one of the Camtasia software engineers recommends against using the TSC2 codec for use in applications outside of their suite:
https://feedback.techsmith.com/techsmith/topics/avis_created_with_camtasia_studio_8_do_not _play_on_other_computers
I'd ask on the Camtasia forums what codec they do recommend and how they recommend transcoding your existing TSC2 files.

Why is it when I use light leaks in after effects why does it stop When I'm in the middle of a ram preview?

Similar Messages

Maybe you are looking for