Why is line not straight

Drawing a straight line results in a line at a slight angle. In fact, see image, the box containing the line is straight but the line itself appears angled.
I have the line rotation set a 0 degrees. And, I notice that if I use the rotation tool it rotates the outlining box and the line maintains its position within the box.
Is there some metric controlling the line and the angle inside the box? Is the line angled for some purpose? Is this correct behavior?
I'd appreciate any help with an explanation or pointers to references that explain what is going.
Thanks.

@ David Brewer - Apologies I didn't click on your reply for "This solved..."
Apparently there is no way to undo the action.
But thanks anyway.

Similar Messages

Why are line graphics not showing up in Preview Mode when they show in Normal view mode?

I am using CS4, I've used InDesign for 4 years. I can not figure out why this is happening...
From the Tools panel, I am using the line and circle tools. Drawing lines (arrows) and circles on my document, with a stroke weight of 1. The lines are the top item on my page, the last thing I draw. I draw lines that would go over not only other graphics, but over text as well.
Problem is that they only show up in Normal view, not Preview view. Hence, I don't think they will show up on the final document.
I've used these tools often, and the lines not showing is a new problem. Can anyone shed some light on why this might be happening?
Thanks, Louise

I looked and yes "nonprinting" was ticked in the Attributes panel. THANK YOU :-)
I knew there had to be a simple solution and I was so frustrated it was eluding me.
Thanks again.

Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ?

Why can I not print from pages but can if I copy to text edit, I get "printer off line message " from pages ? I use HP wireless printer .

Are you sure you have the right printer?
In UNIX/OSX printers are virtual links to devices and even with the same name can be trying to reach a printer via another network address, so it thinks it is another printer.
Peter

Erase tool is leaving dots, not straight line

erase tool is leaving dots, not straight line. any help?

I just need to figure what else I reset because I hit reset all.
That just returns all the tools to their original settings. No big deal.

Why SO Header not get closed automatically after all SO lines get closed?

Hi all :
Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
Thank you in advance
Edited by: Daniel on Jan 18, 2011 8:41 AM

Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
For more detail please see Note:141919.1 on Metalink.
Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
Hope this helps,
Sandeep Gandhi

Why can I not sign in? You already charged my card!

Why can I not sign in? You already charged my card!

Imessage and Facebook is down - Apple servers went down, Wait a bit they are coming back on line....

Schedule Lines not confirmed

Hi SAP experts
Can somebody tell me as to why schedule lines for a material is not confirmed for a material while creating a sales order. I tried creating an order for two materials and since one of the material does not have confirmed schedule lines, it is affecting the delivery and the subsequent functions.
Issue requires immediate action. Pl help me

Hi,
It looks like you don't have enough stock for this item as in availability check,it is not able to confirm item. In case MMBE shows that you have stock available in that particular plant, then it could be possible that the stock is already reserved for other order to be delivered later. To check that, goto the order, select the item which is giving problem, click on display availability. check if you have any customer order in the list confirmed for a later date.( It will show confirmed quantity. ).
Now you can decide, based on the priority, how you want to go. You can un-confirm the quantity in confirmed order, so that quantity is available for other orders.
Thanks,
Gagan

Schedule lines not covering the total order Quantity

We have an issue with Schedule lines
Order created on 19-02-201
Material =M
Requirement type =KSV
Order Quantity =2500
Delivered Quantity=1700
Schedule Lines
Date               Order quantity       Confirmed Quantity        Delivered Quantity
19-02-2010     801                                        0
19-03-210       500                                        0
16-04-2010      500                                    500                                       500
14-05-2010      500                                    0
15-06-2010     0                                        500                                        500
15-06-2010      0                                        500                                        500
18-06-2010      200                                   200                                         200
Item Status
           Processing Status
                                     Overall status=Completed
                                     Delivery Status= Fully Delivered
1)Even though we have not delivered the total Order Quantity 2500,Delivery Staus is Fully Delivered Why?
2)Why the system not created SCHEDULE LINES for the remaining Order Quantity 2500-1700=800

Check if there are still requirements existing for this order on MD04.
You might also want to check how the availabilty is carried out, whats the replinishment lead time - anything mentioned there. Generally if you take RLT into consideration - then the unfulfilled qty is shown at the end of RLT.
Not too clear at this moment on the dates you have mentioned, bit hard to read.
Am curious too, why this is happening.

PO creation-ME21n-Why SAP does not check company code and Plant relation

Hi All,
Does someone know, why SAP does not check Plant and company code relation at the time of PO creation or how can we put validation between plant and company code at the time of PO creation.
<b>Example:</b> Suppose i have a company 0001 which is assinged to Plant 0001. when i am creating a PO with another company code 0002(Entering at header level-Org, data) and using Plant 0001 at line item level. SAP does not do this validation.
How can we put this check in place?
Thanks in advance.
Deepak

Hello Deepak,
There are three types of purchasing
- Company code specific :You need to assign company code to Pur organization
- Plant specific : You must assign plant to pur organization
- Cross company purchasing: No assignment between company code and pur organization.
In the case 3, the system will not check company code and plant relationship, but it will check plant and pur organization specific.
The following is the copy of sap help text:
You can assign a purchasing organization to one company code. This is company-specific purchasing.
You can assign a purchasing organization to no company code. This purchasing organization can then procure for all plants assigned to it, irrespective of the company code to which the plant belongs.
Since each plant must be assigned to a company code, the company code can be determined via the plant in each procurement transaction, even if the procuring purchasing organization is not assigned to a company code.
A purchasing organization must be assigned to one or more plants. This is plant-specific purchasing.
Now, check your company-code and purchase organization assignment.
Hope this helps.
Regards
Arif Mansuri

Frame line not display in next page of main window

hi Xpert,
I am creating layout in SAP SCRIpt,it working fine only the main window of next page frame line is not display.
i m define next page as a FIRST page and writing main window of first page following coding
/:           POSITION XORIGIN '0.50' CM YORIGIN '7.75' CM
/:           SIZE HEIGHT '17' CM WIDTH '19.25' CM
/:           BOX FRAME 10 TW
when i run the program first page are coming properly and only when i go in second page of output then main window lines not displaying.
please guide me how to solve this problem.
Regards,
pravin

Hi Praveen,
In that case why you have to make the main window in the first page and secondry window.
You can use it as manin window itself. Print the total amount in the main window itself in the first page. and copy that main window to the second page.
In the first page under the main window create a text. and there u print the total value and text.
Now copy the main window to the second page..only COPY DONT CREATE NEW.
In the second page now under the main window create the table to print the line items. What every u add in the second page main window it will come in the first age also in the smartforms. But it will nto get printed in the first page.After the text to print the totals call the COMMAND option and call next page in that.
Hope you got me..
Regards
Ansari

Why can i not get a preview of my emails now in the lock screen anymore

why can i not get a preview of my emails now in the lock screen anymore

I understand your discontent regarding the delayed availability of our reps when you call us juliusb85! We offer other customer service alternative for you like Twitter @VZWSupport and Facebook http://fb.me/Verizon or we can assist you here also. However, please keep in mind that this is a peer to peer forum and while our Social Media team monitors the posts, the best way to get immediate assistance when network issues are suspected is to call 800-922-0204 from a different line to troubleshoot device or send us a message on twitter at @VZWSupport.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

Why can i not print e mails and web sites such as ryan air?

Why can i not print e mails and information from web sites such as Ryan air? i need to check in on line but i cannot print
== URL of affected sites ==
http://

See this -
[http://kb.mozillazine.org/Problems_printing_web_pages]

Why can I not call a live person ofr support - this is frustrating.

Why can I not call a support person directly for help - this is frstrating.

I understand your discontent regarding the delayed availability of our reps when you call us juliusb85! We offer other customer service alternative for you like Twitter @VZWSupport and Facebook http://fb.me/Verizon or we can assist you here also. However, please keep in mind that this is a peer to peer forum and while our Social Media team monitors the posts, the best way to get immediate assistance when network issues are suspected is to call 800-922-0204 from a different line to troubleshoot device or send us a message on twitter at @VZWSupport.
AntonioC_VZW
Follow us on Twitter at www.twitter.com/VZWSupport

"An error occurred during activation. Try again." Why can I not sign into imessage?

"An error occurred during activation. Try again." Why can I not sign into Imessage?

Hi,
You stated earlier that you had already deleted the "madrid" .plist with no effect.
Can I check you did this with the app closed down or at least restarted the app straight afterwards ?
If you did that close the app if open and access the ~/Library/Preferences folder again.
This time delete com.apple.imessage.bag.plist
This item stores the Apple server used for your Login to the iMessages server and contains a date/time reference.
Restarting the app after deleting this file will make it reconnect with the iMessages servers in a fresh manner which my solve things.
It may sort out any date/time issues with the stored date.
Messages is one of the app that Apple have "Sandboxed".
This means that some of it's operations are held away from other apps to prevent one app bringing down several others.
This is turn means that the route or path used by the app to Read and Write to the various .plists is different to the direct placing in ~/Library/Preferences.
The Path is ~/Library/Containers/com.apple.iChat/Data/Library/Preferences
Mostly the items in here are then Aliases that point to the actual originals in ~/Library/Preferences. However there are exceptions.
You can copy and paste the Path above in to the Finder > Go Menu > Go to Folder dialogue box to access this folder.
Once there use the Finder's View Menu > Show Path Bar.
This adds a collection of folders across the bottom of the Finder window.
Right click on the Preferences folder at the right hand list of the Path.
Chose the Get Info option.
In the Info panel scroll to the Bottom.
Your Shortname should appear (with (Me) as well) and you should have Read and Write Permissions
If you highlight this and then use the Cogwheel type iCon it should reveal you shortname again but in Greyed out form which mean you Own the File/folder
Repeat this for each containing folder until the Library item on the left (you don't need to do the Little House icon one)
You should have Read an Write Permissions and Own all of them.
Can you confirm this ?
8:04 pm Sunday; June 15, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Unsure why this is not working?

Can anyone give me a pointer as to why this is not working? I put the code from line 16 through 50 in the "...before displaying the page" additional pl/sql section of the wizard. The form wizard created the code from 5 through 15 and 51 through 55. The first error I understand because I think the wizard forgot to end the procedure correctly by saying "end beforeModuleDisplay;" instead of just putting "end;".
If I am right, how can I fix this since the wizard is the one putting in this info? I tried putting the correct end statement in where I put the rest of my code, but that created even more errors.
Error creating package SOCSBO_USER.ACCT_INFO
Error creating package SOCSBO_USER.ACCT_INFO
Line/ColumnError
56/5PLS-00103: Encountered the symbol "PROCEDURE" when expecting one of the following: begin declare end exception exit for goto if loop mod null pragma raise return select update while <an identifier> <a double-quoted delimited-identifier> <a bind variable> << close current delete fetch lock insert open rollback savepoint set sql execute commit forall <a single-quoted SQL string> The symbol "declare" was substituted for "PROCEDURE" to continue.
2128/5PLS-00103: Encountered the symbol "END" when expecting one of the following: begin function package pragma procedure form
-- PACKAGE BODY SOCSBO_USER.ACCT_INFO
-- created Monday 05-NOV-2001 16:52
create or replace
1 package body ACCT_INFO as
2 --
3 -- Created by ASAPP using WebDB at 15:16:46, Mar 04, 2002
4 --
5 procedure beforeModuleDisplay
6 (
7 p_block_name in varchar2,
8 p_object_name in varchar2,
9 p_instance in integer,
10 p_event_type in varchar2,
11 p_user_args in varchar2,
12 p_session in out PORTAL30.wwa_api_module_session
13 )
14 is
15 begin
16 declare
17 l_fs varchar2(200);
18 l_cv varchar2(200);
19 l_sv varchar2(200);
20 l_lang varchar2(100);
21 l_idx integer;
22 begin
23 l_lang := portal30.wwctx_api.get_nls_language;
24 l_fs := p_session.get_value_as_varchar2(
25 p_block_name => 'DEFAULT',
26 p_attribute_name => '_FORM_STATE');
27 l_cv := p_session.get_shadow_value(
28 p_block_name => 'DEFAULT',
29 p_attribute_name => 'A_ACCOUNT_COURSE',
30 p_language => l_lang);
31 l_sc := p_session.get_shadow_value(
32 p_block_name => 'DEFAULT',
33 p_attribute_name => 'A_ACCOUNT_SUBPROJECT',
34 p_language => l_lang);
35 if upper(l_fs) = 'UPDATE_AND_DELETE' then
36 l_idx := row_function.get_index('COURSE_BOTTOM');
37 if upper(l_cv) = 'Y' then
38 p_form.items(l_idx).visible := 'Y';
39 else
40 p_form.items(l_idx).visible := 'N';
41 end if;
42 end if;
43 if upper(l_fs) = 'UPDATE_AND_DELETE' then
44 l_idx := row_function.get_index('SUBPROJECT_BOTTOM');
45 if upper(l_sv) = 'Y' then
46 p_form.items(l_idx).visible := 'Y';
47 else
48 p_form.items(l_idx).visible := 'N';
49 end if;
50 end if;
51 exception
52 when others then
53 PORTAL30.wwerr_api_error.add(PORTAL30.wwerr_api_error.DOMAIN_WWV,'app','generic','SOCSBO_USER.ACCT_INFO.beforeModuleDisplay', p1 => sqlerrm);
54 raise;
55 end;
56 procedure row_function
REST OF CODE NOT RELEVANT

Hello Albert,
You open a new pl/sql block on line 16, but you have only one 'end' statement.
You can correct this by adding another 'end' statement after line 55 or you can remove the inner PL/SQL block and place it in the procedure itself. Variables can be declared after 'is' on line 14. In your example it's better to do it this way. See example.
Hope this helps...
Nancy.
Example solution 2:
-- PACKAGE BODY SOCSBO_USER.ACCT_INFO
-- created Monday 05-NOV-2001 16:52
create or replace
1 package body ACCT_INFO as
2 --
3 -- Created by ASAPP using WebDB at 15:16:46, Mar 04, 2002
4 --
5 procedure beforeModuleDisplay
6 (
7 p_block_name in varchar2,
8 p_object_name in varchar2,
9 p_instance in integer,
10 p_event_type in varchar2,
11 p_user_args in varchar2,
12 p_session in out PORTAL30.wwa_api_module_session
13 )
14 is
15 l_fs varchar2(200);
16 l_cv varchar2(200);
17 l_sv varchar2(200);
18 l_lang varchar2(100);
19 l_idx integer;
20
21 begin
22
23 l_lang := portal30.wwctx_api.get_nls_language;
24 l_fs := p_session.get_value_as_varchar2(
25 p_block_name => 'DEFAULT',
26 p_attribute_name => '_FORM_STATE');
27 l_cv := p_session.get_shadow_value(
28 p_block_name => 'DEFAULT',
29 p_attribute_name => 'A_ACCOUNT_COURSE',
30 p_language => l_lang);
31 l_sc := p_session.get_shadow_value(
32 p_block_name => 'DEFAULT',
33 p_attribute_name => 'A_ACCOUNT_SUBPROJECT',
34 p_language => l_lang);
35 if upper(l_fs) = 'UPDATE_AND_DELETE' then
36 l_idx := row_function.get_index('COURSE_BOTTOM');
37 if upper(l_cv) = 'Y' then
38 p_form.items(l_idx).visible := 'Y';
39 else
40 p_form.items(l_idx).visible := 'N';
41 end if;
42 end if;
43 if upper(l_fs) = 'UPDATE_AND_DELETE' then
44 l_idx := row_function.get_index('SUBPROJECT_BOTTOM');
45 if upper(l_sv) = 'Y' then
46 p_form.items(l_idx).visible := 'Y';
47 else
48 p_form.items(l_idx).visible := 'N';
49 end if;
50 end if;
51 exception
52 when others then
53 PORTAL30.wwerr_api_error.add(PORTAL30.wwerr_api_error.DOMAIN_WWV,'app','generic','SOCSBO_USER.ACCT_INFO.beforeModuleDisplay', p1 => sqlerrm);
54 raise;
55 end;
56 procedure row_function
REST OF CODE NOT RELEVANT

Why is line not straight

Similar Messages

Maybe you are looking for