Why is Mac local input method used for remote input box?

This behavior is observed on latest version.

Hi,
Can you describe more for your case as actual, what you want to perform?
Did you find any specific error\log for your issue?
Please try to reinstall the app and collect log from below path.
Microsoft Remote Desktop>About Microsoft Remote Desktop>Send log via email
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

What is the method used for upload of data

Hi All,
What is the method used for upload of Data from excel spread sheets to SAP HR.
it is Bulk Data from many countries.LSMW or BDC Session Method?
what are country specific infotypes used for PA and OM.
can u plz give the list of country specific infotypes used for PA n OM Module.
Thanks
Archana

Hi Archana,
To Upload bulk data I think BDC is the best and effecient way.
Regarding Infotypes we dont have any country specific Infotypes in OM & PA. In Payroll we do have according to country wise.
I hope you had understood the point
Regards
Pavani
Remainder: Points to be given on answers

Are the fonts installed with the Mac OS OK to use for commercail use? ie, a logo which willbe used for packaging, TV broadcast and internet.

Are the fonts installed with the Mac OS 10.6 OK to use for commercial use? ie, a logo which willbe used for packaging, TV broadcast and internet.

srjeffgr wrote:
Some font foundries require extended licesnes for different uses.
You're welcome. Again, as mentioned in that discussion, you can use Font Book to check if the foundry has entered any license limitation notices in the font info (Preview > Show Font Info).
Basically, fonts are code. The copyright applies to the code. If the product you distribute doesn't include the code, then the copyright does not apply to it. That's why embedding has to be dealt with specifically, because embedding fonts in a document means including the code or parts of it in the document.

Why sql sever database design is used for essbas?

Hi
I am new to the Hyperion technology . i would like to know why do we use any RDBM like sql sever database design for essbase which is itself is the database.What is the main difference between these two databases?
My understanding is that Essbase act as same as SSAS for cube and dimension building.And they use database design for storing the tables and other information.
Thanks

A relational database can be used for a number of reasons with Essbase (and is required in some instances). These include
1. a repository for system tables for Shared services, EAS, Studio,EPMA, Workspace, Financial Management etc
2. A data source for loading Essbase
3. A work area for transformations

SEPA - How to control payment method used for SEPA during invoice entry?

Hi,
To implement SEPA Credit Transfers, a new payment method must be created.
But this payment method will coexist with other payment methods that can be used for EUR payments between non-SEPA countries...
Is there a way to control during invoice entry that the user is using the right payment method? Thus, if the payment is to be made between two SEPA countries, is there a way to control that the payment method used is well the new SEPA payment method? These pmts would fall in error if OSS note 1406227 has been implemented (it creates a table that controls the validity of pmt methods per country of destination) but obviously, we want to control this before the payment run F110...
Or is it only controllable via a user-exit?
Thanks a lot!
Rgds
Vincent
Edited by: Vincent_Belgium on Dec 30, 2010 3:22 PM
Edited by: Vincent_Belgium on Dec 30, 2010 3:26 PM

Hi,
You need to Use User Exit MEVME001 in SAP as well please see the below link for more
http://www.sap-img.com/materials/price-difference-po-iv-vendor.htm
Regards
Ninad Kshirsagar

Can mac book air be used for a micro business?

Hi I run a one-person business. I use an old laptop (which now needs replacing) for:
Creating presentations using PowerPoint and delivering via projector mainly at various locations with equipment of varying quality/brand
Routine office work - using Mocrosoft Office at present
Email
My new laptop must be light but robust enough to withstand the everyday out of office use
I am a photography hobbyist - not a pro - so I need a reasonable editing feature to
That's about it
My recently aquired iPad has encouraged me to consider buying a Mac as a replacement for my dying PC
My question is:
Should I buy a Mac Book Air or should I go for a MB Pro? What are the pros and cons of each
thanks
Boss Croker

To answer your initial question first: Yes.
For what you are up to, you don't need super-power on hand, so any MBA or MBP will do. The rest depends on screen size, SSD/HDD space, RAM (>=4GB), connectivity (without adapters, e.g. for Ethernet), weight/size, and... budget.
Coming from a PC (I guess) you'll also need:
- A handful adapters to be able to connect with whatever you find with projectors and their wiring out there.
- Maybe Microsoft Office for Mac 2011, but if you don't depend that much on exchanging original MS docs with the outside world, Apple's Pages/Numbers/Keynote may do even better, or one of the free Office-like suites.
- With an MBA, you'll want a USB->Ethernet adapter. (Forget Thunderbolt->Ethernet, it's useless if you're on a projector at the same time, more expensive, and the USB->Ethernet is offered by more less expensive 3rd-party brands.)
iPhoto, which comes usually free with a new Mac, offers you easy and, for a hobbyist, decent basic editing tools.
Hope it helps.

What are the methods used for creating customer

i have to upload a text file and create customer using idoc .can any one suggest the methods used to fullfil this requirement

Hi,
Upload the file using the function module GUI_UPLOAD into an internal table then try to pass the values from the file to the segments in the idoc DEBMAS03 using the function module MASTERIDOC_CREATE_DEBMAS to create the customer.
Any doubts regarding you can clarify.
Thanks&Regards
Sarves

What "ethernet port" does airport utility use for "remote administration"

I have a friend who was recently evangelized to Macs and bought a Macbook Pro and an Apple Airport Extreme (gigabit) Router, hereinafter called AE. The place where he lives has cable modem internet access and an older Linksys wireless-G router for the building, and I am trying to configure his new AE, prior to making it the primary router in the network (e.g. connected to the cable modem).
When the AE is completely configured the Linksys will be retired.
I remotely manage and maintain the network and some other computers in that house. The Linksys is configured for Remote Administration so I can manage it. I manage several PC's and Macs using Timbuktu Pro 8, with the necessary ports forwarded through to TB2 on those machines.
I am trying to configure the Airport so it also can be managed remotely, so from a workstation on that network (accessed from where I am using TB2) and running Airport Utility, I have checked "Allow setup over WAN" on the Airport/BaseStation page. Now I would like to test whether I can connect and remotely administer that Airport Extreme from Airport Utility on my Mac.
I assume that, if I can rout packets from my Airport Utility here through the internet to the public IP of the Linksys router there, I should be able to connect. But I can't.
My setup is this. The target AE has its WAN port connected to an ethernet port on the Linksys, as is the LAN in the remote building. Nothing is connected to the AE's ethernet ports at this time. The Linksys is the DHCP server, and the AE has an IP from it, as does all the other ethernet- and wireless-connected computers, printers, etc. The AE's wireless is active and the wireless-connected devices in the building can connect to either its base station or to that of the Linksys. When the Linksys is retired the AE will be the only wireless in the building.
I attempt to connect in the following way: On my Mac, I run Airport Utility. From the file menu I select "Configure other" and enter the public IP address of the remote Linksys, and give AE's password. There is a long wait
Reading the Airport wireless device configuration....
while Airport Utility tried to discover AE, and then
An error occurred while reading the configuration..... (-6753)
I suspect that my remote connection problem is due to the fact that the AE is behind the Linksys, and the proper port forwarding is not in place on it to pass the Airport Utility's packets through to the Wan port of the AE. This might be that I have not entered into the Linksys the correct port number to forward on to the AE. I've tried the three numbers in the list:
"Well known TCP and UDP ports used by Apple software products" found at
http://support.apple.com/kb/ts1629
that are mentioned as possibly being involved with Airport Utility; 192, 4500 and 5009.
Advice will be appreciated.
Bob

One example, and there may be others, is the (free) DynDNS dynamic DNS service which publishes a domain name for the WAN port of your router which can then be resolved, like all other domain names, to the actual IP address of the WAn port of your router. This service provides a solution to the problem of having a proper domain name in cases where your public IP address changes over time. Unless you pay for a static IP address, virtually all ISPs change your public IP address over time.
So, you can register for a free DynDNS account at www.dyndns.com and that is how you come up with the User: and Password: information; use whatever User and Password you register at dyndns.com with.
The first part of the hostname you can define as you wish, subject only to someone else having used it previously, and the remaining parts of the domain name might be "dyndns.org" or one of the other domain names provided by the DynDNS service. So, you could publish, via DynDNS, the name of your public IP address as, for example, joehlam.dyndns.org however you might want something less descriptive or more vague.

Maximum number of monitors used for remote desktop not working correctly

My goal is to connect from my home to my work machine but limit the number of monitors used to 2.
At work, I have a machine running Windows 7 Enterprise SP1 with dual monitors. My home machine is Windows 8.1 Pro and it has 3 monitors (on two video cards).
I followed the instructions of the MSDN blog post about using multiple monitors for remote desktop but cannot get it to work right.
Here's what I see when I modify the group policy setting "Limit maximum number of monitors" on the target (work) machine:
Setting - Result:
1 - 1
2 - 1 (???)
3 - 3
It looks like I can't limit the number of monitors used to 2, I get either one or all. Am I missing something or is this by design?
Max

Hi Max,
Support for multiple monitors is available when connecting from any Windows 7/8.1 computer, however, there are restrictions when connecting to a computer using multi-monitor mode. When connecting to Windows 7 computers, only computers that are running Windows
7 Enterprise or Ultimate can be connected to in multi-monitor mode. When connecting to Windows 8.1, only computers that are running Windows 8.1 Professional or Enterprise can be connected to in multi-monitor mode.
Karen Hu
TechNet Community Support

How to set up local server to use a remote server for login authentication?

Thank you in advance for any help you can offer.
We are trying to set up a "sub-network" (dont' know if this is the right terminology) using a 10.4 Server OS, to manage a set of clients... the trick is that the client login/home directory information is on a different remote server, and shall remain there, for the most part.
To make it easy to understand here's the environment:
*Local Server:* 10.4 G4 Server Quicksilver 1G dual--we have total control of this one
*Main/remote server:* 10.5 Xserve.. don't know which vintage--we have very very very little input on this machine.. effectively at the mercy of the sysadmin of this system who is very conservative in changing anything (hence the need for a separate server to install applications and client machine-specific profiles, etc since the Xserve admin refuses do it). This serves MacBooks/MacBookPros and few iMacs. (no Windows PC.. as that group of comptuers have their own server)
client: ~20 eMacs/iBooks all running 10.4.
use environment: elementary school-->very low network demand (no e-mail, just running local apps linking to server(s) for licensing and login, and some file saving small files on remote server, user preferences, etc).
The remote server (the Xserve) has all the login authentication, as well as the home directories. every school year, the directories get updated as new students enroll and old students graduate. Currently all the clients are directly linked to the Xserve via LDAP while we bring the local server on-line.
the local sever (our G4 Quicksilver) will have few network applications that will support the client machines. We also will be setting up computer accounts and groups for our clients so that we can properly set their environments (the Xserve admin will not do this on the Xserve, so currently all the clients are connecting to the server as a "guest computer" from what little I understand watching what was done)
now, what is the best way to approach this type of set up with minimal "inconvenience" of the Xserve admin?
I am pretty experienced with standalone UNIX and macOS X administration, but a novice to this whole Server and network setup thing. Any suggestions, instructions, pointers to URLs with how-tos is much appreciated. I am not afraid to use Terminal (grew up on UNIX before GUI), etc., and willing to try safe but unconventional setups if that is what's needed...
thanks for any help!

Oh never mind.... I figured it out myself helps to read up on the manuals. d'oh. sorry for the bandwidth waste...

Why do Mac users have to pay for iCloud's photostream yet windows users get it free?

Hi. I have an iPhone 4S as well as a MacBook pro upgraded to Lion, yet my iPhoto still runs from iLife 09. Windows users can use the photo stream feature for free by downloading the iCloud control panel, and yet I have to pay to upgrade my iPhoto to the latest version just to use photo stream despite the fact I already payed for a £600 phone, a £1000 2010 MacBook pro and a further £20 for Lion? I'm not having that. Especially when windows users get it free anyway. How can I get the iCloud windows toolbar/panel on my mac? Or how do I get photo stream without upgrading to the new iPhoto?

cost of iphoto upgrade is a lot less than the cost of windows vista or windows 7 operating systems.
but if you had to have it without upgrading lion or iphoto, get windows on your mac's bootcamp and then you can get the control panel for free.
but all else aside, offering apple content on windows is a means to entice users to purchase other mac products. Don't forget apple is a business designed to sell products. Do you get mad at burger king when you purchase a burger and they expect you to pay extra money for fries and a drink?

What is second local currency fields used for?

Hi experts,
Please tell me what is the this second local currency fields like DMBE2, BDIF2, MWST2, present in BSIK, BSAK fields.
Thanks,
vinay

A Company Code can be setup more than one Local Currency. For instance, many organizations will setup the Company Code for operations located in Singapore with a Local Currency of Singapore Dollars (SGD). But, they will also set it up with a Local Currency 2 of US Dollars (USD), because Singapore organizations often do trading business in US Dollars. Therefore, when an FI transaction is posted, all identified Local Currency values will be updated to it (there's also a Local Currency 3 too, but it's rarely used - if I recall it was initially setup for EU companies when transitioning to the EURO).

PROGRESS ANALYSIS: what does COST PROPORTIONAL measurement method use for?

Hi Experts,
When I tried to use the COST PROPORTIONAL measurement method, I found 1 thing:
+ actual POC = actual cost / overall value
+ BCWP = actual POC x overall value
It means that BCWP = ACWP (actual cost) --> Cost Variance (CV) = BCWP - ACWP = 0
Hence we cannot see the cost variance when we apply the COST PROPORTIONAL method.
Could you please help me to explain the use of COST PROPORTIONAL method?
Thanks and best regards,
Khoa Huynh

Hi Abdul Khader,
Thanks for your answer. I got your point.
But can you explain more about "Cost proportional measurement method is suitable for work packages where costs and services have a constant relationship"
Thanks a lot,
Khoa Huynh

Can a local database be used for ORACLE

Hi,
I am new to ORACLE.
Can we use a local database for ORACLE?
If so, what are the steps to create a local database in our machine?
Thanks,
Krishna.

Hi,
Thanks.
I have heard of the DBCA to install a local ORACLE database
But I think it is an ORACLE client that is installed in my machine.
Can I request my network system services to install a local ORACLE database?
Will that be of some help.
Thanks,
Krishna.

How to not have songs duplicates in app remote? I have playlists for my iphone and playlists for my pc. All songs of my iphone are also on my mac. When i use the remote app, it plays everything in double.

Dear all,
I am using itunes to control all my music and i like to use my iphone, or my ipad to control my music with the remote app.
But i have a problem: all the music i have in my iphone count as double play.
To explain everything since the beginning, i personally don't like and don't trust at all the music sync capability of itunes.
So i have my music on my pc, and i load every type of music as a single playlist (ex a Pop-Rock folder, with all artists folders and so on, makes me a Pop-Rock playlist).
For my iphone, i created a iphone music folder, with the same classification.
It means that i don't have all my Pop-Rock music, only a selection. But of course the selected music appears also in my complete music collection.
So in itunes i created a folder playlist named iphone music, with inside one playlist by type of music (exemple : Pop-Rock, which contains some files of my main Pop-Rock collection).
So i do have duplicates in my hard drive. But when i selected the playlists to be shared on home sharing in itunes, i selected only the main playlists, not my iphone playlists! But still, when i look for ACDC artist for example, i should see only what i have on my pc, not what i have also on my iphone.
The result is if i play an album for example Back In Black (i have it full on my hard drive, and full on my iphone too), then every song is displayed in remote app in double, and also played in double:
Here is how it is displayed:
Song 1
Song 1
Song 2
Song 2
So the remote app plays Song 1 one time, then Song 1 (the second Song 1) one time and continues like this to Song 2 etc...
I guess that if i put my selection of songs on my ipad, i will then have everything in triple....
It is very annoying. Is there a way for me to change that? Or for an update to be made (based on ID3 Tag) to not play everything twice or more? It would have an ID3 Tag No Double toggle button.
I don't want to select from my main music to send elements to my iphone as doing that i lost a lot of music multiple times. This way of doing is not safe at all (at least for me).
What is possible to do? Is there room for improvement here (i believe so). Is there a way for me to avoir this very annoying effect?
I would really like to put my music to my iPad2 also, but after i'll have triple play....
Thank you for your help.

Nobody knows? Not even administrators?
Please it would be really nice to have help on that to take all the benefit of the remote app.
Thank you very much in advance.

Why is Mac local input method used for remote input box?

Similar Messages

Maybe you are looking for