Why is Mac OS X 10.7.4 "too new" to install Autodesk Entertainment creation Suite 2012

Why is Mac OS X 10.7.4 "too new" to install Autodesk Entertainment creation Suite 2012. I went to Autodesk website I found nothing to fix this. Anyone who has ANY suggestions, I would appreciate any help you might provide.

Suggest you ask here:
http://usa.autodesk.com/support/

Similar Messages

Why my Mac Pro hard drive noise and too slow?

Why my Mac Pro hard drive noise and too slow? Totally 8 gb speed system but now very slow . Please give some suggestions

Another thing you can do in Lion (and ML) is click on the "Info" button in Disk Utility to get the SMART status of the drive.It's more detailed now than it used to be and it might tell you if something is wrong.
A lot can go wrong with a hard drive which is why I tend to point people to the downloads section of the following web site:
http://scsc-online.com
They have a free hard drive troublleshooting download book there. I reccommend people download that before asking questionis because there are tons of problems that can act like hard drive problems when there's nothing wrong with the system at all. For example, how full is the drive? How many applications are running? What's the status of Spotlight indexing? How many apps are you running? How much memory do you have?
I could probably think up 20 or 30 more if needed.

Replacing Mac Mini Hard Drive with SSD, and New ML Install

I have a mid-2011 Mac Mini, and it has been running very sluggish, even when there are multiple free GB of RAM and the processor is only at 10 to 20% of capacity. I ran TechTool Pro 6 to do a scan of the whole machine, and it didn't detect anything out of the ordinary.
At this point I am guessing that it's probably a software issue. I have tons of processes running in the background all the time, and have installed hundreds of programs over the last two years, so it could be anything number of things that are somehow messing up Mountain Lion.
So, I would like to replace the 500GB internal hard drive with a 120GB SSD Drive (Samsung 840 Series), and put a fresh install of Mountain Lion on the SSD, put the 500GB in an external enclosure, and see if that fixes the problem.
Can someone explain the best way for me to do this, in a step by step list?
I can figure out how to accomplish each step, I just need some overall guidance as to how I should approach the whole thing.
Thanks very much!
Some other notes:
I have a 3 TB hard drive that I can use to back up everything on the 500 GB hard drive, but I'm assuming that time machine isn't the best way to back everything up, since I won't be able to restore the machine on the 120GB drive that I want to boot from.
Normally, I would get the internal 500GB down to 100GB of data, and then clone it on the SSD, and make the swap, but I'm assuming that cloning the drive will potentially replicate the source of the slowness, so I'm assuming that isn't the best way to proceed.

Here is my opinion and steps I would perform.
Back up your system first.
Check the iFixit.com site for a guide of how to replace the drive. Review Steps 3 and 4 BEFORE you replace your drive.
If you have a USB thumb drive with the ML 10.8.3 installer, skip to step 6.
If you don't have a USB thumb drive with the ML 10.8.3 installer, download the OS X Recovery Disk Assistant and use a 1-4GB thumb drive to create a Recovery HD on the thumb drive you can boot from. Skip to step 6.
If you have neither of the above, after replacing the drive, restart into Internet Recovery by pressing/holding the Command+Option+R keys. Since you have a mid-2011, Internet Recovery will ONLY allow you to download and install Lion since that's what probably came preinstalled on your system.
After you replace your drive and you are booted into the OS X Utilities Menu from one of Steps 3-5, select Disk Utility and format your new drive as Mac OS Extended-Journaled with the GUID partition table.
Go back to the OS X Utilities Menu and select Reinstall Mac OS X.
After the download and install of OS X you can run through the setup creating your user account (same as you had on you old drive).
If you were able to install OS X ML, skip to step 11.
If you installed Lion, you will have to login to the App Store and download/install your purchase of ML.
Run Software Updates to bring your OS X up to date.
Now you can restore any data files and apps that will fit onto the new drive from Time Machine. Enter Time Machine and navigate to your last backup to view the /Applications folders and your user folders (e.g Documents, Downloads, Music, etc.).
For your email, you can open Finder then press the Option key to see your user Library folder in the list. Select it to open it then enter Time Machine again and navigate to your last backup so that your user Library folder is opened in Time Machine. Copy your Mail folder to your Desktop so you can copy it back to your current user Library.
I think that's it.

Power Mac G4 Won't Boot...New RAM Installed...

Hey there,
I was just given a Power Mac G5, QuickSilver. It looked relatively clean inside, and had all the neccessary components already installed except for the RAM. I went ahead and bought 3 PC133 SDRAM modules, but when I put them in, I hear one loud beep and it appears nothing is happening. I can hear the fans blowing inside, but I don't get anything displayed.
I know this one beep means the computer doesn't see the RAM, but could my battery be dead? Would that also cause the sound?
Anyone have any other tips or tricks?
Thanks in advance for any info. I'd like to salvage this bad boy if at all possible.
Cheers

Hi-
Apparently it was one of the launch models for the Quicksilver, or at least that's what I'm told.
That'll be this one:
http://www.everymac.com/systems/apple/powermacg4/stats/powermac_g4_733qs.html
do you know if there are limitations to how high I can go with hard drives?
That model/series (QS 2001) only supports up to 137 GB drives (128GB formatted).
You can use a 160GB drive with no worries regarding the "unused" portion.
I was kind of wondering if I could purchase a Serial ATA PCI controller card that would allow me to use SATA hard drives.
Of course you can.
This will also get rid of the capacity limit.
However, if you want to boot to the connected drives, not all support boot.
The best, hands down, controller that also supports boot is the Firmtek Seritek line.
The 1S2 is as cheap as they come:
http://eshop.macsales.com/item/Firmtek/FTST1S2/
I was also given an AGP G4 (400MHz) that was missing the hard drives, RAM, and battery.
All those parts are basically the same for the QS and the Sawtooth (AGP G4).
You can try a stick of your new RAM and any ATA hard drive (up to the same limits as the 733 QS) and see if you can get it going.
Order a new PRAM battery (or 2) from OWC while your at it.
Always nice to have a fresh one.
BTW, ALL QS processors are interchangeable.
That is to say, if you find a deal on any other QS processor (and heatsink), even a dual processor, it is a straight swap.
Look around my website, as there is a bunch of information that you might find interesting:
http://www.jcsenterprises.com/JapamacsPage/All_ThingsPPC.html

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

General inquiry - Why ar .Mac and publishing/accessing iWeb sites so slow??

Greetings,
I do realize that that general topic has been addressed somehow many times, in whole or in parts. I am just shooting for a general update on the subject(s).
I have grown fond of iWeb and just renewed my .Mac subscription. I am also a user of Dreamweaver and FrontPage. I just find the iWeb/.Mac combination so straight forward and... irresistible fun to play with!
BUT, before i commit more to that environment, I need to know - again:
1. Why is .Mac/iDisk so slow in access?
2. Correspondingly, publishing to .Mac and iDisk is slow. Why, actually?
3. Difficulties in accessing iWeb sites published to .Mac/iDisk when using InternetExplorer (which, whether we want it or not, IS the predominant browser out there...). We know Firefox is better at it.
4. Ultimately, would publishing iWeb sites to other servers (I have a couple of non-iWeb websites currently hosted elsewhere) make publishing AND accessing such sites speedier?
I will appreciate any advice, input, assessment.
- Roger T

I think it's because it's more a social server with a lot of server side features available for .Mac users and iLife applications. Therefore there's a fair amount of server work when users use it for email, web sites with slideshows, backing up, etc. A commercial server will be much faster. There are othesr here that know more about servers than I and can give you a more technical explanation. But you're right, it is slow but convenient.
OT

Why outlook2011 mac version* takes long time to boot with OSX

why outlook2011 mac version* takes long time to boot with OSX

Okay, so after doing all of the above, the computer still takes between 40 seconds and 1 minute or so to boot up, and the VersionCue messages still appear. However I discovered that the "kdcmond cannot retrieve..." messages disappeared after I disabled my ethernet connections. So at least I know that that had nothing to do with the extended boot-up time.
I have heard that the more RAM you have, the longer it takes to boot due to the RAM count. Since I have 10 GB, maybe this is why?
I've included the most recent Console messages below:
22/4/08 9:56:16 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
22/4/08 9:56:16 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
22/4/08 9:56:16 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
22/4/08 9:56:39 AM com.apple.SystemStarter[28] Starting Aladdin USB daemon
22/4/08 9:56:39 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
22/4/08 9:56:39 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[74]) Exited: Terminated
22/4/08 9:56:39 AM com.apple.launchctl.Aqua[90] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
22/4/08 9:56:42 AM com.apple.launchd[82] (0x1011e0.VersionCueCS3monitor) Failed to check-in!

Why is apple this stubborn about not creating a new iTunes library in my Mac without telling or asking me? Does it think i'm that ignorant?

Why is apple this stubborn about not creating a new iTunes library in my Mac without telling or asking me? Does it think i'm that ignorant?
After consulting all the forums, I see that Apple is not answering this simple question: so disrespectful!
Please do something about it! All it takes is to write a little code: in the "Advanced Preferences (advanced????) give us an option that just asks you IF you want to create a replacement iTunes library before doing it! is this hard for you Mac guys????? To me, and to others, many, this arrogant attitude is just disrespect. Do you know the difference between making love and rape?

OK, OK,
I read a little. I just tried the "Music alias" thing. It seems to work!!!
Thanks to whoomever wrote this.

Why does mac os keep asking for keychain password

why does mac os keep asking for keychain password

I'm getting this same problem. It seems random when it asks for the password, maybe every 3 or 4 days it'll ask when I plug it in at night. I've tried restoring from an older backup, which has not resolved the issue.

Why may mac starts all programmes (word, excel..etc), when I turn my mac on?

why may mac starts all programmes (word, excel..etc), when I turn my mac on?

Make sure that Open at Login is not selected?
... and that you have not checked the box "Reopen windows when logging back in"?
... and Word, Excel etc are not included in the items listed in System Preferences > Users & Groups > Login Items?

Why my mac is os x 10.8.3 booting and login very slow

i'm useing MBP15 mid 2012 (core-i7, 8gb ram, os x10.8.3) i bought this pc about a month ago. when i first boot it, it was like lighting first but now after 1 month it takes 1min+ to bootup and login why my mac is getting slower plz help me to solve this problem

Once in a while my Macbook Pro and Macbook Air sometimes experience a slow boot time and slow in performance.
I've done the following and it seems to work for me - give it a shot.
First I would open disk utility and verify disk permissions - if errors are found - i would repair it then restart my Macbook.
If no errors are found - then I go to system preferences - start up disk and select my drive as the start up drive and restart it - this would speed up your boot up process.
Also performing a SMC RESET does restore the performance of your Macbook Pro - you can read about what SMC RESET does for your Macbook when you do perform one.
Good luck - hope you get it sorted out.

Why the mac claim that the user password that i enter in the smb file sharing settings is incorrect although it is correct?

why the mac claim that the user password that i enter in the smb file sharing settings is incorrect although it is correct?

Maybe the Caps Lock key is lighted?
Is your Apple ID password the same as your user password?

Why is Mac Help so slow?

Why is Mac Help so teeth-grindingly slow in Lion? Perhaps because Lion is a download-only OS, Apple seems to have put the entire Help System online, but Surely there is a way to download the help system to my Mac?
It often takes half a minute just to get my search results, and if I do several searches, this really adds up! in addition, if I am downloading something etc. the help system will give me the message that my Mac is not connected to the Internet. Is this normal?
I am much less likely to use the help system now because it works so poorly.

odysseus wrote:
Does OnyX do anything different from TinkerTool System?
I'm not familiar with TinkerTool system (just the free TinkerTool app).
Anyway, deleting caches and plists according to these instructions helped a great deal.
That's probably sufficient, but Help has changed significantly since Snow Leopard, and the X Lab articles don't seem to have been updated since then.

Why did Mac delete camera memory card?

We used a card reader that had been used on a PC, and a camera memory card that had been used on a PC. A pro master GB compact flash. The photos were put on iPhoto. When the card was put into a reader on a PC after that, it refused to let us see the photos. Now back on the Mac, it says the card is not recognizable.
Why does Mac refuse to allow you to use things on a PC? How do we get the photos back and in the future how do we avoid this?

Hi Terence
I just thought I would let you know that I followed your link and the second video where the guy cuts a piece of card and inserts it into the slot worked for me at only the second attempt. This retrieved the HD Card after it was completely lodged in the CD Drive and invisible.
Thank you so much for the link....you have probably saved me about £100 and a long trip to an Apple Store.
Thanks and have a nice day.
Albert.

Why does Mac OX 10.6.8 keep making copies of a file anytime I download, copy, or move a file?

Why does Mac OX 10.6.8 keep making copies of a file anytime I download, copy, or move a file? It will copy, dowload or move the file, then begin making copies until I reboot. This makes it impossible to deal wit hfiles unless I want to spend a lot of time rebooting after every time, then deleting all the redundant copies.

If I understand what you are saying this is very strange. Sure you tried Reparing Permissions and all that. Also sure you're aware that when moving a file from the hard disk to an external - the default is to make a copy rather than a move. If the movement is with the same disk (e.g. hard disk - hard disk) the Default is a Move rather than Copy.
Anyway try this: Move a file between location where you would normally have this problem while holding the Command Key (which triggers a Move rather than a Copy). I would also try quickly setting up a New User Account and see if the problem is present within this New Account. This may provide a clue as to what is happening.
Also, what browser are you using when the download problem happens?

Why is Mac OS X 10.7.4 "too new" to install Autodesk Entertainment creation Suite 2012

Similar Messages

Maybe you are looking for