Why is MPEG4 HD 1920x1080 so poor quality on iMovie 6

I am importing MPEG4 HD 1920x1080 footage to iMovie 08 and it looks amazingly sharp and crisp, but the program continually crashes on me so I have imported the same files to iMovie 6 but they look very average and much lower quality than the same clip in 08.
Any reason behind this?
Scott

Do you have the play back preferences set to similar settings. I use 1/2 screen for full playback in iM08 because of the large file sizes I deal with in converted AVCHD. In iMovie HD6 I use standard, which is not the highest resolution available. You may have iM08 set for a higher playback than iMovieHD.
I assume you just did an import to iMovie HD via browse to the clips from the iM08 events folder, so you are looking at the exact same clips.

Similar Messages

Why is an "original" iPhoto export poorer quality than my original photo?!

Hi Everyone,
I hope you're all well. I had a question regarding iPhoto - I have an SLR which takes really good quality pictures, and I wanted to back them up in more than one location. I already have them in my iPhoto library - however, when I tried to export them with the "Original" option on File Export, and compared the exported version to the ones in iPhoto, its poorer quality than the one in iPhoto! Even though I selected "Original" quality!! However, when I exported it using PNG, it was exactly like the photos imported in to iPhoto. I understand that PNG is a lossless file format, but I am very confused as to why exporting photos in its original format gives a worse quality picture!
Would someone please be able to explain what is going on, and why the original export is much worse than PNG?
Thank you for your time!
Regards

How are you determining that the export is "much worse" than the imported photo
What format are you shooting on the DSLR (I assume it is digital)? What format are you exporting?
For what it is worth I do two daily backups (Time Machine running hourly and a daily bootable clone of my entier system) and I dod an occasional off site backup and I use three 32 GB level 10 SD cards so even shooting 16 MP RAW I only rotate back to the oldest card about once a year giving me a year's originals in addito=ion to my other backups
LN

Why has Siri's voice become poor quality in IOS7 ? The old voice was much more human like and not so fuzzy

Just updated to the latest ISO7, unsure yet if I like the look, but know that Siri's voise is now poor quality and less human like. The old voice was far better quality and an enjoyment to hear, the new one makes me not want to listen to it now I have heard the old one...

Same here. I use SIRI in Germany and the quality of SIRI in GM was way better. Now the voice sounds more "robotic" like the SIRI voice in IOS 6
Oh, a friend of mine uses IOS7 on his Iphone 5 and the voice-quality of SIRI is WAY better. I´m using a Iphone 5S... Can anyone confirm that this problem only exists on the Iphone 5S?
Message was edited by: Sanny1977

Pics still poor quality in iMovie HD

Hi, Trying to help a photographer to make a still image slideshow in iMovie 4, I discovered the images were of such poor quality as to be unuseable. I upgraded to iLife thinking that iMovie HD might use better quality. It doesn't appear so. The photographer doesn't think the Ken Burns effect does anything to improve the visual degradation of his images. Is this simply the case, or is there any way around it?

iMovie doesn't preview well, you really need to go all the way through the process of creating what appears to be a crap DVD to discover that.
To make sure you're not misunderstanding...
The problem isn't just that iMovie HD doesn't display the image as well as it might. The poor-quality image on the DVD is a real problem, which occurs when the slideshow is handled in a way that allows iMovie to add "jaggies" to the image on the way out the door to iDVD. Search for "jaggies".
Here's one:
Karl Petersen, "iMovie- Pictures become blurry after import" #32, 11:37am Apr 25, 2005 CDT
Done correctly, you should get excellent results.
Karl

Poor Quality in iMovie 09 with Stills

I've read through many posts and found some solutions, but the question to begs to ask: Why, when doing a movie with pics from iPhoto, is the final output quality so freaking poor?
My pics are upwards of 9MB apiece originally. I realize they get compressed through the process. I can do a 15 minute video on a DVD, and iDVD burns it to about a third of the disk. Why can't the program (either iMovie or iDVD) calculate the pics and only compress to a certain extent?
When I play a finished product on my Mac, it looks pretty good. But when I convert it through iDVD and burn it to a DVD disc, the output on my HD (yes, I realize THAT'S part of the issue) looks horrible. Aliasing is ridiculous.
I tend to save the files to the highest output and put it on my media player. However, when I want to share the final result with friends on DVD, I'm slightly embarrassed. The quality is just too poor.
I'm open for any input. I realize you can't burn high def to a DVD, but surely there's a better solution. Maybe iMovie 11?
Thanks in advance.

I make slideshow movies using still photos exclusively. Here is the process I use when I want to make a DVD from an iMovie project.
In iMovie I set the ratio to 16:9 and I also crop many of the photos in iPhoto to 16x9 (HD) - this works best for pictures in landscape; it's not good for portrait photos. Also, cropping this way doesn't work for all landscape photos either: sometimes I lose details that make the photo 'good' and so just leave it uncropped.
When the project is finished I choose Share>Export using QuickTime and click "options". In "options" I use the following:
Compression: H.264
Quality: Best
Frame rate: 29.97
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1920x1080 (HD)
Scale: Letterbox
I use either iDVD or Roxio Toast to create a DVD.
The issue of the quality of DVDs made from iMovie projects has often been discussed in this forum. The process and settings I use may not be strictly kosher, but I do get good quality DVDs this way and so I stick with them. My projects are usually between 20 to 30 minutes in length.
I hope this helps.
(I haven't tried iMovie 11 yet.)

Poor quality in Imovie

I imported a movie via Iphoto( its 16m big). It looks okay in I photo, but in Imovie it has very poor video quality. How can i fix this?

I make slideshow movies using still photos exclusively. Here is the process I use when I want to make a DVD from an iMovie project.
In iMovie I set the ratio to 16:9 and I also crop many of the photos in iPhoto to 16x9 (HD) - this works best for pictures in landscape; it's not good for portrait photos. Also, cropping this way doesn't work for all landscape photos either: sometimes I lose details that make the photo 'good' and so just leave it uncropped.
When the project is finished I choose Share>Export using QuickTime and click "options". In "options" I use the following:
Compression: H.264
Quality: Best
Frame rate: 29.97
Frame reordering: yes
Encoding mode: multi-pass
Dimensions: 1920x1080 (HD)
Scale: Letterbox
I use either iDVD or Roxio Toast to create a DVD.
The issue of the quality of DVDs made from iMovie projects has often been discussed in this forum. The process and settings I use may not be strictly kosher, but I do get good quality DVDs this way and so I stick with them. My projects are usually between 20 to 30 minutes in length.
I hope this helps.
(I haven't tried iMovie 11 yet.)

Very poor quality with imovie

hi all
i have a canon hf200 that records mts file. 1920x1080
when i export my movie with imovie the quality of the video is very poor,i export as quicktime movie and i lose a lot of quality.
need i to convert mts file before import it on imovie?
ps:sorry for my english

To increase the quality of a video, one of the things you can do is by instead of exporting the video using Quicktime just select 'export movie...' from the share menu. You can then select what level of quality you want, after selecting what you want to name your movie and where you want to save it.

Help please -My HQ photos are being rendered in very poor quality in iMovie

Hi there
I have a problem I cannot solve in iMovie (HD 6.0.3).
I am making a movie/slideshow of photos using very high quality photos imported from Aperture. I'm finding them incredibly BAD quality when it comes to the rendering of finished product, the most obvious problem being the pixellation (seen as wavy lines) when the Ken Burns effect is used. It looks the worst on a plasma television, which it is being made to watch on.
I have burned it at the highest quality I can find, but there is still no improvement. Can anyone help please? I'm doing this as a gift for my parents, but don't want to send them something of inferior quality.
Thanks!
Carly

if you've burned it to DVD, then its probably a standard definition iMovie project which means that is 480 lines interlaced. it makes no difference how high quality the originals are, they'll still be re-sized down to 480 lines and since its interlaced, that means that you're only ever showing every-other line. and because standard definition alternates between the odd and even numbered lines, you'll probably see lots of shimmering in the highlights. it will look worse when you try to stretch it across a high-definition TV because there's interpolation going on to up-convert the whole thing back to the 720 or 1080 lines of high definition.
in short, you'll never really get super-high quality from a standard definition TV and you'll only get good results on a high-def TV if you keep everything high def (720p or 1080p) throughout the entire workflow. and until Apple updates its software to handle Blue-Ray or HD-DVD authoring, it'll be very expensive to master those kinds of discs!
best of luck,
scott
PowerMac G5 2.5GHz Mac OS X (10.4.8) MacBook Pro 2.0GHz

Why poor quality AIC & Apple ProRes HQ video when compared to original video files!

First, I'm a long time PC user who has recently switched to Mac's and I'm rather picky about the quality of my videos.
Problem: I have HD video from a Canon HF S10 camcorder and Canon EOS 7D that looks fantastic on a PC... but looks very so-so once imported into a iMovie or FCE or FCP. I've tried all three programs using AIC and yes I've even tried Apple Pro Res HQ (FCP 7.0 log & transfer) and still end up with very poor quality mov files when compared to the originals. Part of the problem (or benefit of a PC) is that the PC actually plays the original RAW MTS/M2TS/MOV files without any trouble and and they look unbelievable. Where as my Mac has to import/convert the file to AIC or Apple Pro Res HQ... so no matter what codec I use, my Mac produces video that is not even close to what I get out of my PC.
My original RAW files are all 1920x1080 60i and are MTS files from the HF S10 and Mov files from the 7D. Even the original RAW Mov files produced from the 7D don't look as good on my Mac as they do on my PC. I even took a SD card with the original files down to the local Apple store to see how they look on a Macbook Pro and they still don't look like the originals on my PC. Also, all my comparisons are being done side by side on two 24" Apple cinema displays at full size (1920x1080) that are calibrated. What am I doing wrong and why the loss in quality? Any ideas as to why the quality is just so-so when compared to the originals would be greatly appreciated. Thanks in advance.

The thing that is wrong is that you are judging the quality of VIDEO on COMPUTER monitors. Properly calibrated or no...this is not how you do it. Calibration for computer monitors sets them right for PHOTOSHOP and color, not VIDEO and proper monitoring. Only getting a signal to a broadcast VIDEO monitor, or HDTV, will show you what you really have. And for that you need an HD input/output device or capture card...and the HDTV or HD monitor.
Computer monitors are never the place to judge video quality. Resolution is typically lowered to allow for full frame playback. Even if paused.
Shane

Why are burned DVD's poor quality from the IDVD?

I made a slideshow in iphoto and exported to IDVD so I could burn copies. The show lloked great on screen but the first copies on dvd's were terrible. The quality of images are very poor and seem to be depixilated? Why would the copies be so poor? Does the widescreen or standard have something to do with it??
Help

Hi
There are levels in h*e*l*l*
iDVD - is same as DVD Standard - Interlaced SD-Video
Feeding iDVD progressive or HD material will not improve result but degrade this as from
- iMovie'08 to 11 - as they can not deliver - but only every second line of the picture
- iDVD downscaling from HD - is doing a bad job
So by using a program that can deliver - best possibly DVD is the result
- iMovie HD6
- FinalCut any version
- FotoMagico™ - (for SlideShows)
If this is not enough - then DVD is no option as HD-DVD is rare and needs special HD-DVD-players - alt
• Blu-Ray e.g. from Roxio Toast™ but still needs BD-Player as PlayStation3 etc
• out in high quality to USB-memory to be played on device that can do this
• Play via MacBook and out to a HD-projector/TV
DVD quality
1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
• Professional Quality
(movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
• Best Performances
(movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
• High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
(movies + menus up to 120 min.) - slightly lower quality than above
Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
About double on DL DVDs.
2. Video from
• FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
• iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
• iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09 this can also be set)
This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
(I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
iDVD quality also depends on.
• DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
deliver anything better that this.
HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
_ Roxio Toast™ 10 Pro incl. BD-component
_ BD disks and burner if full length movies are to be stored
_ BD-Player or PlayStation3 - to be able to playback
The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
• HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
less than 5Gb and Your result will most probably not play.
• How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
• Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
• Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
• What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
Convert to .aiff first and use this in movie project
• What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
(If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
(Dropping a PAL movie into a NTSC iDVD project
(US) NTSC DVDs most often are playable in EU
(EU) PAL DVDs most often needs to be converted to play in US
UNLESS. They are play-backed by a Mac - then You need not to care
• What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
• How You encode and burn it. Two settings prior iDVD’08 or 09
Pro Quality (only in iDVD 08 & 09)
Best / High Quality (not always - most often not)
Best / High Performances (most often my choice before Pro Quality)
1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
(x4 by some and may be even better)
2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
Region codes.
iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
DVD Studio pro can set Region codes.
1 = US
2 = EU
unclemano wrote
What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
Try to break the process up into two stages
• Save as a DiskImage (calculating part)
• Burn from this .img file (burning stage)
To isolate where the problem starts.
Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
• Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
• Use Verbatim DVD-R (absolutely no +/-RW)
• Set down burn speed to x4 - less burn errors = plays on more devices
• No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
• and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
• and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start a brand new iDVD project
• Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
• Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
TO GET IT TO WORK SLIGHTLY FASTER
• Minimum of 25Gb free space on Start-Up hard disk
• No other programs running in BackGround e.g. Energy-Saver
• Don’t let HD spin down or be turned off (in Energy-Save)
• Move hard disks that are not to be used to Trash - To be disconnected/turned off
• Goto Spotlight and set the rest of them under Integrity (not to be scanned)
• Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
pointer to this - turns on screen saver - to show that it has nothing to show
• No File Vault on - Important
• NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
• Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
• Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
• And let Mac run on Mains - not just on battery
Yours Bengt W

Why poor quality AIC & Apple ProRes HQ when compared to original video files!

First, I'm a long time PC user who has recently switched to Mac's and I'm rather picky about the quality of my videos.
Problem: I have HD video from a Canon HF S10 camcorder and Canon EOS 7D that looks fantastic on a PC... but looks very so-so once imported into a iMovie or FCE or FCP. I've tried all three programs using AIC and yes I've even tried Apple Pro Res HQ and still end up with very poor quality mov files when compared to the originals. Part of the problem (or benefit of a PC) is that the PC actually plays the original RAW MTS/M2TS/MOV files without any trouble and and they look unbelievable. Where as my Mac has to import/convert the file to AIC or Apple Pro Res HQ... so no matter what codec I use, my Mac produces video that is not even close to what I get out of my PC. My original RAW files are all 1920x1080 60i and are MTS files from the HF S10 and Mov files from the 7D. Even the original RAW Mov files produced from the 7D don't look as good on my Mac as they do on my PC. I even took a SD card with the original files down to the local Apple store to see how they look on a Macbook Pro and they still don't look like the originals on my PC. Also, all my comparisons are being done side by side on two 24" Apple cinema displays that are calibrated. Any ideas as to why the quality is just so-so when compared to the originals would be greatly appreciated. Thanks in advance.

If you're working in Final Cut Pro you should try that forum. What version of the software are you using? The AVCHD media should be ingested using log and transfer. The 7D media should be converted using Compressor. You don' need HQ, ProRes is sufficient. How are you monitoring the video? Are full size on a video monitor? All this should be explained on the FCP forum. FCE does not work with ProRes in any form.

Why are my adobe complete picture vidios poor quality

Why are my adobe complete picture vidios poor quality

I think the OP is refering to this: http://tv.adobe.com/show/the-complete-picture-with-julieanne-kost/
There are buttons in the lower right corner for adjusting the playback quality. The better choices require a fast internet connection.

Why does my brand new HP Officejet 5740 have extremely poor quality scan results?

My brand new HP Officejet 5740 has extremely poor quality scan results!
Excessive and unacceptable amounts of white specs appear in the resulting jpegs, of what are perfectly clean, orignal, dark, documents, pages and photos, when placed into the scanner. Why is this happening???
Has anyone else experienced this problem? If so, how did you resolve it?

Hi @mpstone1,
Welcome to the HP Support Forums! I see you are not happy with the scan quality on your new HP Officejet 5740, when you scan something you are getting alot of white specs.
I would like you to first perform a Hard Reset on the OJ 5740:
1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.
2. Unplug the other end of the cord from the power source.
3. If there is a power module on the power cord, disconnect one end and reconnect it.
4. After 60 seconds, plug the cord directly into a wall outlet (not a surge protector or battery backup as they can cause the printer to lose basic functionality over time).
5. Plug the power cord into the back of the printer.
6. The printer should automatically power back up. If it doesn't, turn it on with the power button.
7. Try making a photocopy (if your printer is an all-in-on printer) before connecting any other cables to the printer.
8. Connect any other needed cables to the printer.
Please continue here: Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans, complete the steps listed, make sure the scanner lid is fully down when powering on, do not lift the lid until the printer is fully initialzied.
If after the troubleshooting has been done the copy quality has not improved, contact our technical support at 800-474-6836 as it may be the hardware and you would still be in warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Why am i getting poor quality photo prints after installing lion using canon pixma 6120?

After installing Lion, I began experiencing poor quality photo prints on my Canon Pixma 6120 printer. Prior to Lion, my picture prints were all high quality. Now, anything black in the picture is faded.

Lion should not cause the blacks to print faded. The printer drivers used by Snow Leopard and Leopard are the same version as that used by Lion.
For starters I suggest you check that you have the latest version installed. This Apple KB article shows the MG6100 series has v10.51.2.0 as the latest version.
I also recommend you do a Nozzle test print. This can be executed from the MG6120 control panel or via the Printer Utilties window (via Print & Scan, select the printer and then open Options & Supplies and then select the Utilties tab).
If the nozzle test print is okay but the blacks still look faded when printing photos (note the printer has two black ink tanks - one for photos and one for text) then try a reset of the printing system. This will remove the MG6120 from the Print & Scan pane but not the supporting drivers. So you will only have to add the printer again.

Camtasia Poor Quality in Premiere CS4 Export

I am a PC user. One of my clients uses Mac and Camtasia to screen capture his software program, which I need to integrate into a video I am making for his company. The MP4 Camptasia file he sends me looks good. I bring the file into Premiere to edit it, but when I export it, the clip done with Camtasia has very poor quality, while the footage I shot with my video camera looks great.
Specs:
Camera: HMC40, PH mode 1080/60i (MPEG-4 AVC/H.264 compression).
PC: i7 quad-core 64-bit running Windows 7 Professional 64-bit, 8 GB RAM.
Editor: Premiere CS4 in the Adobe CS4 Master Collection .
New Sequence setup in Premiere: AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic.
Premiere’s export settings:
Format: MPEG2
Preset: HDTV 1080p 29.97 High Quality
Multiplexer tab > Bitrate and Buffering Details: Variable
Video Tab > Basic Video Settings > Quality: 5
Field Order > None (progressive)
Profile > Main
Bitrate Settings: Bitrate Encoding: VBR 2Pass
Minimum Bitrate: 4 (default)
Target Bitrate: 15 (default)
Maximum Bitrate: 18.5 (default)
GOP Settings > M Frames: 3 (default)
N Frames: 15 (default)
Output summary: NTSC, 1920X1080, 29.97 drop frame (fps), Progressive, Quality 5.0
Note in general: I found that if I set the Bitrate Encoding at VBR 1Pass, I got glitches sporadically.Using VBR 2Pass has solved this.
My question about the Camtasia clip:
1) How can I get the Camtasia footage to be as sharp in the export as in the original?
Other questions in general:
2) Are my New Sequence setting in Premiere correct? AVCHD > 1080i > AVCHD 1080i30 (60i) Anamorphic
3) Is my choice to export as MPEG2, HDTV 1080p 29.97 High Quality preset, the best for the footage I shoot?
4) Is my choice to set the Multiplexer tab > Bitrate and Buffering Details at ‘Variable’ the best?
5) Do my Bitrate and GOP settings need adjustment?
6) Should my Export field order be Upper instead of Progressive?

function(){return A.apply(null,[this].concat($A(arguments)))}
The frame rate is 1038 X 882
That is a very odd frame size, and one that probably won't work well no matter what workflow you use. You asked:
function(){return A.apply(null,[this].concat($A(arguments)))}
how could he better capture and export to match my workflow?
Have him capture and export to match your desired export frame size for the finished project.
function(){return A.apply(null,[this].concat($A(arguments)))}
How would you suggest I change my workflow to handle the interlaced and progressive issue?
I can't answer that until I know exactly how you intend to deliver your finished video. Any answers to your other questions will also likely depend on your intended delivery format and media.
-Jeff

Why is MPEG4 HD 1920x1080 so poor quality on iMovie 6

Similar Messages

Maybe you are looking for