Why is music in playlist on 2nd gen itouch not listed under music heading in itunes?

I have a few playlist that I created on my iTouch that when connected to iTunes does not list the music in those playlist under the Music heading. How can I include these playlist songs? Without the missing songs I can't get an accurate number of songs on iTouch.

Correction this is a 32g 3rd gen itouch.

Similar Messages

  • 2nd gen iPod not visible on Desktop or in iTunes

    I have a 40GB 2nd gen iPod that works fine and until recently always appeared on the Desktop and in iTunes whenever connected. Haven't had any problems with the iPod or iTunes. Now it is not visible at all but it does still recharge.
    It's connected with FireWire 400 but it doesn't show up in System Profiler or Disk Utility.
    I've reset it. I've forced Disk Mode. Nothing works.
    Another thing... I have my whole music collection stored on an external LaCie drive and connected to the laptop with FireWire 800. iTunes works fine, though, whenever I connect the iPod to the laptop, iTunes stops playing (the spinning colorwheel appears) and as soon as I disconnect the iPod, I hear the external drive kick in and iTunes resumes playing.
    Please help! Thank you.

    Thank you for your reply, socrates.
    I always connect the iPod into my Powerbook via FireWire 400 and the external LaCie is connected to the laptop via FireWire 800. So, there is no daisy-chain setup.
    Actually, I've just realized that my iPod is 3rd generation not 2nd. When I looked at the "Settings" on the iPod it says Version: 2.3 so I thought that meant 2nd generation but just discovered otherwise. Is there any way that I can change the title of the thread?
    And any more advice would be much appreciated. Thanks.

  • My iPod touch (2nd Gen) will not play my music!!

    I have restored my iPod touch to factory settings and made iTunes sync my music all over again... and it still won't play my music.
    The music does appear in the music app, however, as soon as I try to play a song, it just pauses it and then it goes back to the playlist.
    Unfortunately my iPod will not upgrade past iOS 4.2.7... it's a very old iPod, but I don't need a new one!! Please help me how do I solve this?

    What happens when you try to load those songs (drag and drop in iTunes) from your iTunes music library to your shuffle?

  • My Ipod touch 2nd gen will not sync for some reason to itunes. I've tried almost every possible solution I can find on the internet. The ipod charges fine when connected and Windows also recognizes it as a device but itunes refuses to. What should I do?

    Any help would be greatly appreciated.

    Thank you for the reply. Your answer crossed my mind but I havent downloaded songs in a while so I never paid attention to whether it was syncing or not. However, in my sync history I see that it successfully synced 3 months ago....

  • 2nd gen ipod not recognized in windows xp or itunes

    I have been working on this for 2 weeks. I have loaded the latest usb drivers/chipsets. Have followed every suggestion on apple website. Obviously lots of people have this problem. When my shuffle is plugged in the computer sees it as new hardware and trys to load a driver which of course there is not one. The hardware "fails to install" and windows can't see it. itunes diagnostics sees all the controllers but no ipod connected. I am about to return the shuffle as I cannot use it. There is nothing wrong with my usb ports my ipod nano works just fine as do all my other devices (camera, printers, mouse, etc.)
    Has anyone solved this?

    there is no drive letter assigned. ALL that the computer does is when the ipod is plugged in it says "new hardware found" and the word ipod appears in the system tray. Then immediately the Found new harware Wizard starts up. it says, "This wizard helps you install software for: ipod. So I am interpreting that the usb port is working and the driver for the port is reading the device. However, since there is no disk or software to install, eventuall a Found new hardware bubble reappears saying you a problem was encountered and the hardware was not properly installed. I don't get any farther than that. The device is NEVER listed in My Computer. As indicated before, there is an entry in device manager showing the ipod under other devices with the yellow exclamation point and the detail showing a Code 1 - no driver.

  • I deleted the playlists on my iPhone and when I now try to synchronize with my iTunes account to put the music back, nothing happens and I do not get the music back on my iPhone. Anyone who knows why that could be? Grateful for any suggestions!

    I deleted the playlists on my iPhone and when I now try to synchronize with my iTunes account to put the music back, nothing happens and I do not get the music back on my iPhone. Anyone who knows why that could be? Grateful for any suggestions!

    I know it sounds weird, and that is the reason I posted my question.  Because my case is not like all the ones I've found online and it's confusing.  I added a screen capture of my itunes with my old iphone (the one that houses my playlists) connected to it.
    My playlists "ARE"  in my iphone 4s.  They are still there even though they do not show up when I plug in to itunes in my computer. 
    When connecting my phone to itunes on my macbook, the playlists do not appear anywhere in itunes.  I have found my connected iphone icon, I have clicked on the arrow next to it and it does pull up the standard lists that come with the iphone/itunes:  Music, Movies, TV shows, books.  That's it! below that is "Genius" and below "Geniuns" is "PLAYLISTS"  but the only playlist of mine that shows there is one that I created several years back titled "90's music" and that one I created it on my computer, not my phone.  Under "90's music" there are also other standard playlists that itunes automatically adds.
    Does anyone else have this issue or know how to get around this.  I am starting to think that I am going to have to recreate these lists on my computer

  • Ipod Shuffle (2nd Gen) Does Not Recognize Songs

    My Ipod Shuffle (2nd Gen) does not recognize the songs that are loaded on it. When I turn it on after a full charge the green light stays on for about 5 seconds then turns off. When I press play, the colors flash orange and green indicating there are no songs loaded. I've tried all the recommendations and also seen that people with similar problems have not been able to resolve the problem as well. I've seen some cases where the use of the Ipod Rest Utility is recommended however I have Vista on my PC and there is no version available for that o/s that I could find. Does anyone have any other suggestions. Thanks.
    Ipod Shuffle (2nd Gen)   Windows Vista  

    I changed the iPod to Disk mode and it just blinks orange while it is connected to the PC. It says that it is synched on the PC screen but I thought the blinking orange light means that it isn't. I took it back out of disk mode. The original problem still exists...when I turn it on, the green light stays lit for 5 seconds then there's no light at all....when I press play the lights alternate orange and green indicating no music is loaded which is wrong since it shows all my songs that are loaded when it is connected to my PC. What a mess.

  • 2nd Gen itouch syncing

    2nd Gen itouch: I am using Outlook Express on my PC & wish to continue doing so.
    Succesfully synced music, photos & bookmarks but will not sync address book. I have tried using Outlook, this does not work and have followed all insructions in manual. Can anyone help?

    Can anyone help?
    Not here I'm afraid. This is the *Mac OS X Technologies > iSync* forum, which has nothing to do with syncing iPod touch (not iTouch) to Windows PCs.
    Try here: Connecting iPod touch to Windows

  • My 2nd gen IPOD touch will no longer sync with itunes.

    My 2nd gen IPOD touch will no longer sync with itunes.  it tells me it cannot read the contents of the ipod then it says the ipod software server cannot be contacted.  Any suggestions?

    Update Server
    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem
    Then try restoring again.

  • IPod Nano (2nd gen.) not displaying in finder or desktop

    iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
    help would be appreciated
    Thanks

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • My 2nd Gen iPod Touch won't show up in iTunes but does appear in My Computer

    When I connect my 2nd Generation iPod touch to my laptop it will not appear in iTunes. It does, however, appear in my Computer.
    I have worked through all of the troubleshooting guides on the Apple Support section, and have uninstalled and reinstalled iTunes twice.
    This message appears every time I plug my iPod in, and frequently whilst it is still plugged in charging:
    'MobileMe Service has stopped working.' This is a pop-up window produced by Windows, I know this is the 'service' that picks up an iPod's prescence but stopping and restarting the service does nothing. My iPod still won't show up.
    Please help, I am willing to faff around a bit. Might it be a problem with Windows itself? If so, how would I go about fixing it?
    Thanks in advance,
    P.S I have the latest version of iTunes, and the operating system of my iPod is 4.2.1.
    My version of Windows Vista is 32-bit.

    I have the same problem with my 2nd gen itouch.
    I've tried other computer and my childrens iPods work on my computer so not a windows problem.  I've tried reinstalling iTunes and resetting itouch as per apple support pages but nothing, it doesn't even show on my computer. Any help greatly appreciated :-)

  • Ipod shuffle (2nd gen.) not recognized by my powerbook (g4)

    My new iPod shuffle (2nd gen.) not recognized by my powerbook (g4). Get error message "The disk you inserted was not readable by this computer". It works just fine with my iMac (g4). If iTunes is open the shuffle is just not recognized. Have tried my shuffle on a friend's PowerBook (Intel based) and it works fine. His new shuffle behaves exactly like mine on my powerbook. All other uses with USB ports appear fine - flash drives etc. I did initialize a new flash drive with 128 bit encryption before the 1st attempt to initialize my new shuffle.
    Help! Thanks

    Does it show in Apple System Profiler's USB tree? Have you tried connecting it (through its dock) to another computer?

  • IPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

    iPod shuffle 2nd Gen is not recognized on PC, but other shuffles are. Software is updated. Is this the end of the road for this particular shuffle?

    Hi envisionquest,
    I'm sorry to hear you are having issues with your iPod. If your 2nd Gen iPod shuffle isn't being recognized by iTunes (but other are), you may find the troubleshooting steps outlined in the following Troubleshooting Assistant helpful:
    Apple - Support - iPod - iPod shuffle (2nd generation) Troubleshooting
    Regards,
    - Brenden

  • HT5569 cannot connect to wi-fi network with my 2nd gen itouch even after following most troubleshooting solutions; have 3 other devices that connect with no problem (using wndr3700v3 dual router)

    cannot connect to home wi-fi connection with my 2nd gen itouch even after following most troubleshooting solutions. i have 2 5-gen itouch ipods and a kindle fire hd 8.9 that can connecto to my wi-fi network and even download from my e-mail accounts with no problem. it had no problem connecting with my old a/b/g netgear router nor the first time i installed my new netgear wndr3700v3 router. since then, no connection. don't know what happened.
    help

    Does the iOS device connect to other networks?
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar
    Could it be this:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • How do I update my 2nd gen iTouch in order to get angry birds???

    How do I update my 2nd gen iTouch in order to get angry birds???

    This is the way you upgrade.
    What is the problem?
    What happens when you do this?
    Do you you click Check for Updates on the summary page in the main itunes window?
    What exactly have you tried?
    What exactly happened?

Maybe you are looking for

  • Oracle.sql.* with JDBC drivers 8.0.5

    the oracle.sql package is not included in my JDBC driver file classes111.zip given for oracle data server version 8.0.5. I would like to use the oracle STRUCT and ARRAY type for calling PL/SQL stored procedures taking STRUCT objects in arguments. Are

  • Exporting PDF Issue

    When i export a pages document with images to PDF and transfer to windows to print I open the pdf in windows and the images in the PDF are inverted ie a negative of the original picture.

  • Recalling Process Order confirmations after selecting Last delivery indicator in error

    Hello, I was completing an order confirmation and hit the last delivery indicator. I submitted my confirmation but noticed I had not completed my amount. When I tried to pull the order back up,. I was not able to. Is there anyway to recall this order

  • 1_WIRE_LO_REF in NI PXI-2503

    Hello, I've used NI PXI-2503 (serial ports) to read current output signals from a circuit, and 1_WIRE_LO_REF has been used for reference (voltage input to the circuit?). To switch over to parallel communication, I will use SCB-68. In this box, I have

  • How do you change the computer you normally sync with?

    My friend is trying to get iOS 5 on his new computer but it wants to delete all his iPhone data. We already transfered his data. How can we update his iPhone without wiping his iPhone and using his old computer?