Why is my 4G frozen on white apple screen?
My iphone 4 has been frozen on a white apple for about a day! i have tried hold down the home button and the top power button but it keeps going back on to the apple. what do i do?
Go here to try theses steps to get it back working. If it doesn't work then you may have to take it to an apple store for repair or replacement.
http://www.apple.com/support/iphone/assistant/phone/
ps It is iPhone 4 not 4G
Similar Messages
-
Tried to restore and phone has frozen on white apple screen
i plugged my partners phone in to update, it said that there was an error and i should restore it, i did that and it said there was an error nd ejected the phone i plugged it back in twice and then it just froze on the black screen with the white apple on it, i can't switch off or anything. Please help, he's not a happy bunny
I would try and get the phone into DFU mode and restore.
How to DFU Mode -
I am getting a white apple screen with a spinning clock like logo-I can't do anything it just keeps spinning
Other troubleshooting information.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
Mac Pro (early 2008) No chime, pixelated white apple screen
My Mac Pro (early 2008) stopped working this morning. It was working fine yesterday, but did not start today.
i Press the power button, and there is no chime. The fan whirls around and the cd disc drive makes a noise. The startup screen shows up with Pixelated black bars across the whole screen.
this his stays onscreen, freezes for a few minutes, then restarts And continues the cycle of freezing and restarting.
iI've tried to reset the smc and pram and that hasn't done anything.
i've cleaned the inside of the computer, checked the RAM and graphics card, they seem to be in good working order.
does anyone know what's wrong with it?Hi BDAqua
i tried safe boot. The white apple screen still comes up pixelated but with a grey loading bar at the bottom. Once the bar has loaded fully, nothing happens. it stays frozen on that screen until I have to force it to shutdown by pressing and holding the power button on the front of the tower.
i Tried holding the alt key. It brings up the devices, the screen is still pixelated. Pressing either one of the disk drives, didn't do anything new Unfortunately.
https://mobile.twitter.com/SundeepToor/status/559966340883415040/photos
hopefully you can see what my screen looks like in the link. -
MacBook Pro (late 2011) stuck at white Apple screen.
Hi all. My MacBook Pro 13 inch (late 2011) is giving me the same problem over and over again.
Few months ago, I had sent it to Apple for repair due to faulty HDD. Now the same problem happened again. The MacBook will stuck at the white Apple screen with the circle turning when attempting to switch on.
However, Apple had just replace a new HDD and why it's still happening again?
Can anybody here please assist to advice me what is making my Mac unable to start up, stuck at the white Apple screen, even after replacing a new HDD?
Thank you!Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
so yesterday i dropped my iphone and the home key stopped working. i had to turn the phone completely off to change screens and get back to the home page. today i turned it off to get back to the home screen and now it is frozen on the apple screen. its been like this for about an hour or so. i plugged it into the computer and it still hasnt done anything. i try to reset it but of course since the home button isnt working it wont allow me to do so.
does anyone know what to do besides taking it to apple?You can try the steps recommended in the User Guide. If they don't work bring your phone into Apple for evaluation.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
G5 mac wont boot up past white apple screen
My kids mac wont boot up past the white apple screen. I can here everything running but the monitor starts to get all static and scan lines with a reddish tint to it. I tried the commandoption+pr but it still wouldn't boot-up past the white apple screen. Not sure what else to do. Any help would be greatly appreciated. Thanks in advance
Hi there Peter,
Not cheap anyway you look at it sorry, professional Data Recovery being the most expensive.
Unfortunately, Disk Utility can't fix all that much, and the only other Apple Options are erasing the HD, or installing OSX to a second drive, then using Migration Assistant to move stuff over to the new HD.
If Disk Utility or fsck should fail to repair it, your best bet is DiskWarrior from Alsoft, you'll need the CD to boot from if you don't have another boot drive...
http://www.alsoft.com/DiskWarrior/
Your best bet is DiskWarrior, you need the CD/DVD though.
http://www.alsoft.com/DiskWarrior/
But others that may work…
Drive Genius 2…
http://www.prosofteng.com/products/drive_genius.php
TechTool Pro 4…
http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83
Data Rescue II...
http://www.prosofteng.com/products/data_rescue.php
This one would require another HD with plenty of space to recover to.
You should use another Boot Disk or other Mac with this one in Target mode to do the recovery.
They have a free demo to see what it could recover. -
G5 wont boot past white Apple screen.
To anybody that may have some advice. I hadn't used my power mac in about 4 days then when I turned it on last night it wouldn't boot past the white apple screen. I still have the chime my fans and processor still spin up. I tried resetting the SMU, and I also took out 3rd party ram I had installed and tried booting up to see if that was the problem. I'm prepared to take it to the apple store, I just thought somebody might have some advice before I take it there. So again when I boot up it reaches the white screen with the grey apple and then it just gives me the little grey spinning dial and just spins and spins. Thanks in advance to anybody with any advice.
Dual 2.0 GHz Power mac G5 Mac OS X (10.4.8)Well first I booted holding option and it just booted into target disk mode or something like it, a screen that would allow me boot from a different drive if I had one that was formatted with Tiger. So then I rebooted holding >shift and OPtion. And it kernel paniced, it said it didnt have the driver for this version Tiger 7,2 or something along those lines and then it gave me apples screen of death asking me to restart.
-
Macbook pro won't boot, stuck on white apple screen
Noticed today, that my macbook pro won't boot . It gets to the white apple screen with the spinner under the apple logo. It stays like this for a long time without doing anything except spinning.
I've powered down and tried to boot up several times.
I have boot camp and windows on my mac and when the white screen appears, I can press Option to bring up which hard drive and the Windows partition will load without any problems.Exacty what happens when you try to boot up from the disc that came with your computer? Are you holding down the c key? Have you tried holding down the "option key?" Are you able to run the Hardware Test - Intel-based Macs: Using Apple Hardware Test
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Lion - This will install a "fresh" copy of Lion without archiving old system files but leaves the rest of your files in place.
If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems. It's what you're paying them for.
Out of warranty - take the computer to an Apple store or an AASP. Whichever is more convenient for you. -
My iPad jumps from the start screen to the white apple screen every 2 to 3 seconds. Turning it off or resetting it does not work. The restore from iTunes will not work due to the fact that I need to click off Find My Devise before I can restore...I can't get in to click that off.
Any ideas?FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. If you did not do step 4 properly, start all over again. -
My macbook pro was recently returned to me after having been lost. When I turned it on and connected to the internet at home, the activation lock activated. I put my password in and the macbook went to a white apple screen and now won't do anything else. How do I get it running again?
Take it to an Apple Store. Take proof of purchase with you.
-
My mac stops at the white apple screen
my macbook pro stops at the white apple screen and wont move
Which version of OS X are you running? Which model MacBook Pro (e.g., "15-inch Late 2011") do you have?
See -> https://discussions.apple.com/docs/DOC-5431.
Clinton -
On doing a full Restore on my iMac from A time capsule, I am getting a permanent white apple screen with permanent loading wheel. This is my second attempt to restore with the same outcome. Seems like the last stage of the restore is getting stuck. Any tips on how to sort this out please.
iMac, Mac OS X (10.7.3)It just means some spammer is using your email address as the sender address for their spam. This is very easy to do - anyone can do it simply by changing the From email address in their email program. It does not mean your account was hacked or you have a virus (there are no current Mac viruses on the loose anyway, nor has there been for years).
There's nothing you can do about it. It can happen to anyone and the spammers will move on to using someone else's email address before long. -
Computer will start up at white Apple screen then shut off.
I have an older Mac Book Pro that I start up and hear the chime and white Apple screen. There is a small turning dial below the Apple showing it is "thinking" before start up. After a minute or so it just shuts off. I have over 5000 pictures and 4000 songs that I havent backed up.
HELP!If it is over 4 years old, replace the PRAM battery.
If it is under 4 years old, try the data recovery techniques on my FAQ*:
http://www.macmaps.com/backup.html#RECOVER -
Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
Hi cybertoof,
Welcome to Apple Support Communities.
It sounds like you're seeing a startup issue with your Mac, it's booting to a gray screen with an Apple logo. Try the suggestions in the article linked below, they will resolve most issues related to starting up your Mac.
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/TS2570
I hope this helps.
-Jason
Maybe you are looking for
-
Connecting MBP 2009 to Samsung syncmaster F2080
Hi Guys, I have a 2009 MBP 13" that I want to connect to a Samsung Syncmaster F2080. Do I need a mini display port to DVI or something else? Thanks
-
After restarting the system, WAS for ABAP is not able to connect Database
Hi, I installed Sneak Preview SAP NetWeaver Application Server for ABAP in Local system. After restaring the desktop,I am getting following errors- 1. SAP-Basis System: Initialization DB-Connect Failed, Return Code 000256 2.Database: Database error
-
I updated my Firefox to 19.1 and since then Firefox will not respond and gives the following error message ""The instruction at 0x77a42245 referenced memory at 0x77f174e8. The memory could not be read. Clic on OK to terminate the program. When you cl
-
Having a Labview VI as a permanent display on a test run
Using LabView 8 and TestStand 3.5 Currently, the test sequence is composed of 5 sub-sequences. Each sub-sequences will perform test using some VI and creating success, warning and failures. Now, I would like each sub-sequences to call a common vi to
-
I uploaded a theme. What happened to my tool option?
I uploaded a theme. I no longer have the usual options at the top left, like: Tools, Bookmarks, etc. All I have is options I dont need: Most Visited, Betting Started, Latest headlines.... How do I get the generic options back?