Why is my apply button grey?  It only has revert.

I just updated my iPhone 3GS to the IOS6.  Now when I sync my iPhone to my iTunes, my apply button is greyed and it only says revert.  Can anyone help me please?

Hi rebeccapatterson,
Thanks for visiting Apple Support Communities.
See this article for some troubleshooting steps that can help:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
Cheers,
Jeremy

Similar Messages

  • TS2972 Why is the "Import" button grey when I'm trying to transfer music from one computer to another?

    Why is the "Import" button grey when I'm trying to transfer music from one computer to another using Home Sharing?

    Hi lexipuppy,
    I dont know if you have your music on your other computer was on itunes, but if it was, make sure that you signed into your itunes account on your other computer. If you are signed in then your music should show up in your library.

  • Apply button greyed out and not syncing music

    So my itouch is not syncing music. I checked the boxes for every album and song I want but when I go back to apply the changes, the apply button is greyed out. Only the revert button is working. For some reason, my other itouch is syncing perfectly but this new one isn't and I don't know what to do, can somebody help??

    This is the support document for the wi-fi being grayed out. http://support.apple.com/kb/TS1559

  • HT1338 why is my WiFi button grey'd out?

    Right, im not verry happy, this is the seccond time this has happend.
    I got my phone in December, i got it updated and my wifi button wasnt working, i had to make a way to an Apple store and i got a new phone.
    This has happend again to me...
    I carnt keep making trips to an apple store as it is miles away and i will have to pay for train.
    why is my phone doing this and had any one got suggestings how i can fix it my self with no charge?

    Hi rebeccapatterson,
    Thanks for visiting Apple Support Communities.
    See this article for some troubleshooting steps that can help:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    Cheers,
    Jeremy

  • Why is my wifi button greyed out

    For some reason my phone wont let me switch my wifi button on. Its very frustrating because i cant update my phone to ios 7. Also i work long hours soo i dont have time to go to the apple store. Please help me

    This Apple doc lists the possible fixes for the problem-> iOS: Wi-Fi settings grayed out or dim
    If it isn't fixed after running through that doc setup service.

  • Using the Android Reader app, why is the signature option greyed out?

    I have a client that has enlisted me to create 3 fillable PDF forms. I used FormsCentral to create these fillable forms, then I saved them as PDFs to my Dropbox. I opened the Adobe Reader app on my Tablet, and access the forms. As for the client, they are home builders, and these 3 forms are 3 different stages of the building process. They are using them to interact with the new homeowner. They want to do this on Samsung Note 10.1 tablets with Verizon data. There are 3 issues I am faced with fixing:
    1. The signing process is quite a process. Meaning too many clicks to setup and apply a digital signature according to the customer. And that is on a PC, because I am unable to use the "signature" function - the button is greyed out. Why is that?
    2. Once we resolve the above issue, then will there be a way to "lock" the form so that the customer's responses and selections are unchangeable? If so, how?
    3. Once the form is signed and "locked" (if possible), what is the simplest way to send the form via e-mail? I ask because they want there to be a way to setup the form to e-mail copies to the addresses that are entered into an e-mail field on the form. Sort of "auto-populate" the addresses as well as be able to set a predetermined address (back to their office) so that the results may be sent via mobile instantly upon completion.
    I know that is a lot to ask. Your help would be most appreciated!
    Thanks in advance, Rob

    (1) Why is the Signature button greyed out (disabled)?
    You used FormsCentral to create fillable forms and exported to PDF.  When exporting FormsCentral forms to PDF forms, FormsCentral adds "extended rights" to PDF forms so that users can fill out the PDF forms in Adobe Reader (which is a PDF viewer, not a PDF editor).
    The current version (11.5.0) of Adobe Reader for Android does not allow signatures to be added to any "Reader Extended" PDF documents (including forms).  We are actively investigating and trying to resolve the problem.
    (2) Is there a way to "lock" a PDF form?
    You can "flatten" a PDF form after the form has been filled out and signed by a customer.  Once flattened, it's not possible to change filled data or signatures.  When you try to email a filled PDF form (optionally with a signature), Adobe Reader for iOS will present the E-mail Document dialog with two options: "Send Original Document" and "Send Flattened Copy".  You can choose the "Send Flattened Copy" option.
    Unfortunately, the feature has not been supported in Adobe Reader for Android yet.
    (3) What is the easiest way to send a "flattened" copy via email?
    Because the issues 1 & 2 above have not been resolved, you are not able to do this in Adobe Reader for Android.  However, you can do this in Adobe Reader for iOS.
    First, you need to add a Submit button to your PDF form.  I am not sure if you can do this in FormsCentral.  But you can use Adobe Acrobat (a paid product) to add a Submit button.
    Setting action buttons > Add a submit button
    When your customer taps the Submit button in the PDF form, Adobe Reader (for iOS - for now) will present thee same E-mail Document dialog.  Once the "Send Flattened Copy" option is selected, Reader will launch the default Mail app and auto-populate email address(es) specified for the Submit button action.
    Please let us know if you have further questions.

  • HT1695 Why is my wifi button gray

    Why is my wifi button greyed out on my I phone 4 and it won't let me go on the internet?

    Hi Melissa5th
    You may want to take a look at soem of the troubleshooting steps listed in the article below.
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    - Griff W.

  • Apply and OK buttons greyed out in console after updating custom lists

    Service Manager 2010 SP1
    I updated some custom lists that are used in our incidents and now the OK and Apply buttons are greyed out in the console. It's been years since I built this out and I'm hazy on how it all works. I tried putting everything back the way it was but the buttons
    are still greyed out. Any new incidents created AFTER I made the changes to the lists are working OK.
    Any ideas what happened here?
    Any help appreciated, thanks,
    Dan

    yes, that's usually the reason but as far as I can tell, all of the required fields are filled out and I've even changed each of the fields to see if that would help but it doesn't.
    This only seems to be happening with 20-30 tickets that were created before I changed my lists. Newly created tickets are OK.

  • Why can't a button have 'actions applied to it' in Flash CS3?

    Why can't a button have 'actions applied to it' in Flash CS3?
    I'm used to working with buttons in Flash MX and Flash 8 but
    after creating a button in Flash CS3, I'm getting text that reads
    'Current Selection Cannot Have Actions Applied To It' and so the
    actions menus are greyed out.
    What's the problem?

    There is nothing stopping you from producing files in the old
    ways. Go to the publish settings and select to publish as AS2. You
    can then use the techniques you are familiar with.
    However as dzedward points out, Actionscript has come a long
    way. The technique of putting the code directly on instances really
    went out with Flash MX in 2001 and for a long time now that wasn't
    the best way to do it. See this article by the very excellent David
    Stiller about it:
    http://www.quip.net/blog/2006/flash/museum-pieces-on-and-onclipevent
    So even if you aren't ready to take the plunge into AS3, I
    would recommend learning this style for all your AS2/1
    needs.

  • HT4623 Why can't I find the Software Update button?  I only see About and Usage.

    Why can't I find the Software Update button?  I only see About and Usage.

    Under About, what version do you have? The Software Update option in Settings was not introduced until iOS 5.0.

  • Only one Apply button for Dashboard Prompt in obiee

    Hi experts,
    We have a need wer we need to place prompts at specified places like one at right top then next 3 one below other. But only one Apply button.
    Please let me know how to customize OBIEE 11.1.1.5 to achieve this.
    Thanks in advance.

    Hi,
    You are using OBIEE 11g ,so constrain the second report should be on the first prompt.I mean,In the second prompt properties we have an option like "based on the other prompt";where you need to give the first prompt column name.like wise third prompt also.
    Then you will get only one apply button for 3 prompts.
    mar if helpful/correct..
    thanks,
    prassu

  • Trying to sync my iPod Nano (8Gb) When I toggle the "iPod sync" tab I do not get the "apply" button. Why?

    Trying to sync my iPod nano (6Gb) for the first time to my laptop (Windows 7). When I toggle the "iPod sync" button I do not get the "apply" button to start the sync. Why?

    I have a 27" iMac with the latest version of iTunes.  I tried restoring my iPod and even removing and re-installing iTunes.  What eventually worked for me was plugging into my PC and restoring/reformatting it to work with my PC.  I don't know why it wouldn't work with my iMac, but now it seems to be working.

  • Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

    Why is the decline button for phone calls not available when the phone is locked? I need that button and it shows only when the phone is not locked on iOS 7

    Yep. You need to touch the sleep/power button once to silence the ring, and twice in order for the call to go directly to Voicemail.
    Personally, I dont understand why Apple eliminated this. If you wish to give Apple feedback, do it here:
    www.apple.com/feedback

  • Apply Button not working in Report viewer web part in SP 2013

    I have a SSRS report which gets values from SSAS cube, with more than 10 parameters defined in the report. All the parameters are multi-select parameters and the report is deployed in SharePoint 2013 integrated mode.
    I created a web page and integrated the SSRS report inside a report viewer web part. All the report parameters are from Performance Point filters. All the PPS filters are connected to SSRS report.
    The problem is each and every time the parameter is re-selected(changed) the whole page gets refreshed.
    So I added a Apply button, so that the report gets refreshed only after clicking the Apply button. Even after adding the apply button the report gets refreshed on each parameter change.
    Can you please let me know why the apply button is not working and possible solutions to overcome this.

    Hi,
    There's no much similar issues I have found.
    I suggest you consider opening a support case with us, provided the sample code for reproduce and version of SQL Servr. You may visit this link to see the various support options that are available to better meet your needs: 
    http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone.

  • ServerStats 'Apply' button disabled

    I am having an issue in E-Load in getting my monitors to actually work with my load test. I have set up the configuration with all metric monitors, selected that configuration in the 'server stats configuration' section on the autopilot page and the monitors load, but the 'Apply' button is disabled. Any ideas on why this is?
    i have attached a screen shot.

    In that screenshot you have already applied that ServerStats configuration. Select a different configuration and then hit the Apply button. Or try running a session without ServerStats and then after the test is running, select a ServerStats configuration and press the Apply button. See the attached screen shot for an example.
    The Apply button only becomes active if you have a running e-Load session and you want to add more ServerStats counters.
    You can see if ServerStats counters are being collected by creating a new graph and selecting the ServerStats counters from the Available Data Series.
    -Kevin

Maybe you are looking for

  • In purchase register i need material wise gl wise amount

    In Miro transaction when i see line items I.e i can display Material, PO number and amount. If i click on follow on documents i can display GL wise amount. Now my requirement is for each material what is the GR/IR Gl and its amount. Cenvat GL and its

  • Display Hierarchy according to levels

    Hi All, I have Hierarchy which is of five levels. At each level their respective description is also there. When i uploaded it in data manager, It is uploaded correctly according to five levels. But at each levels, all the level descriptions are disp

  • Reason for this output

    i need to know that why this code is giving the following output..what's the flow of control....... public class ThreadPrint { static synchronized Thread makeT(final String id,boolean d) {Thread t=new Thread(id) {          public void run() {System.o

  • Cs 1 or cs 2 is still available now or only cs 6 options for yosemite!

    cs 1 or cs 2 is still available now or only cs 6 options for yosemite!

  • 10.7 Mail and exchange issues after time machine restore

    Hey all, Trying to figure out what the problem is with mail Background - was running 10.7.1 - had mail configured with exchange no issues what so ever. - hard drive failed and I restored with time machine using the recovery hd partition in Lion - mai