Why is my balance decreasing

Ok so i only bought 4 games (.99 cent ones)Games are, "Pocket God,Pocket God Uranus,Zombieville 2,and Impossible game.At first my balance was 15 dollars before i bought anything and the next day I ended up with $2.25!Why is Happening i only bought 4 games that are ONLY .99 cent ones?

Have you logged into your account an looked at your purchase histore for other chargers?

Similar Messages

  • Balance Decrease = Score Decrease?

    So, I got an alert today which says that my credit card balance decreased by 55% which lead to a 6 pt drop in my score. Does this sound right? If I am paying off my credit card balance, why is my score dropping instead of increasing? Please hep me understand...  

    If you are speaking of myfico alerts ... they are not reliable to pin point the reason of a score increase or decrease. There is something in the background happening that decreased your score. Like a hard pull, a collection update, etc.
    Myfico will give you an alert of an account change then at the same time show you a point change but they are not necessarily directly related.

  • Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

    Question why has my balance on my itune account have totally disappeared when I have only been using it for less than a year? had still fair bit of money in it too. around $60

    First, make sure you're logged into the iTunes Store using the account ID and password you set up, or used, when you redeemed your card/gift.  If you are, try signing out of the account and back in.
    If you're sure you are using the correct account and that you're signing in to the iTunes Store, and signing out and back in doesn't help, go to the Purchase History and review your purchases to make sure that you should indeed have a balance left. iTunes doesn't always refresh the balance it shows, so it's possible you spent the money and it just wasn't being reflected in the display. This display error can usually be corrected by logging out of the iTunes Store and then back in.
    If you confirm that you should have balance left but the iTunes Store isn't showing it correctly, send a message to the iTunes Store customer service department through the contact form you'll find by selecting the most applicable section of their Support page (select the Contact Support link and follow the instructions) and explain the problem to them.
    Good luck.

  • Why the battery percentage decrease continuously while charging?

    Why the battery percentage decrease continuously while plugged in??

    Is it PLUGED into USB or the mains If mains try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data. Bsydd uk

  • Why is my balance incorrect?

    I bought my $35 Prepaid Card, as usual, yesterday. My bill was due today. For some reason I have a balance, in red, of $34.80. Why did it not take my $35 and how can I fix this? Please help! Thank you in advance!

        I'm sorry your having issues with your prepaid service RachaelNicole98.Please reach out to our prepaid department to review the account. I'm sure they can get this addressed. They can be reached at 888-294-6804.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • Why is my balance not reflecting my new redeemed itunes card

    My redeemed Itunes balance is not showing up on my itunes account balance.

    Is Automatic Downloads enabled on your New computer... are you using the Same Apple ID... Is you new computer Authorized...
    Automatic Downloads...
    http://support.apple.com/kb/ht4539
    Also see...
    About authorization and deauthorization

  • Why do the increase/decrease volume buttons not make a noise when pressed?

    My macbook aluminum used to make a noise from the speakers when I pressed the volume up/down buttons on the keyboard. They don't anymore. Anyone have any ideas as to why this is happening?

    Go into System Preferences -> Sound -> Sound Effects and turn on the feedback sounds for volume change.

  • PayPal balance decreasing?

    Hello. I use SGD (Singapore Dollars) and I had been automatically losing money for no reason and it would not show up in my transaction history, I have changed my currency to USD to see if this would solve the problem, but I need to know what happened to my money, it went from $911 to $905 in just a span of 3 days. Please help me.

    Sounds as if it may have been sent to you by mistake, in which case keep it in your balance and refund it if you get a request to do so. If you withdraw it and later get a dispute you would have to re-pay it anyway. 

  • Why does battery percentage decrease even when new iphone5 is plugged into power?

    My new iphone5 seems to lose charge on occasions whilst I am using it and it is connected to power ?

    Something is running that is consuming power faster than the charger can replace it.

  • Why no load-balancing seen here?

    We have a setup for DEV like this ( all java only):
    Webdispatcher   -
        CI(msg server) + DI1 +DI2     
    However , when  users access  the webdispatcher's URL, we see those users only show up in the CI.
    We do not remember we had this problem before.
    How will the users be distributed among CI and DIs?
    Thanks!

    Hi CZ,
    Have you define any Logon Group in SMLG?
    Add your CI and both the dialog instance in that. And in the portal give the same Logon Group name in the Group field.
    Secondly check your webdispatcher profile the following parameter is set or not
    wdisp/load_balancing_strategy = weighted_round_robin
    Best Wishes,
    Kumar

  • AR AGING REPORT. Why 'BalDueDeb' minus 'BalDueCred' not same as Balance?

    Dear All,
    I am trying to build SQL which mimics the AR Aging Report in SAP B1 8.8. Reason is to add additional fields needed by Management. I get the SAME TOTAL as Ageing, but when I run my query, I can't get the same no. of rows as Aging.
    Aging has 700 rows (NOT display reconciled transactions), and my aim is to get the same no. of rows.
    Case I: When I use: WHERE (T0.BalDueDeb - T0.BalDueCred) != 0
    I get 816 rows. All zero balances are eliminated, but it seems that some transactions which have been reconciled appear in my report as outstanding debits and also credits. This is why it has more rows than Aging, although total is correct.
    Case II: When I use: WHERE Balance !=0
    I get 5026 rows. Many rows show zero balances. I don't understand why they are not eliminated. I thought the 2 commands were equivalent.
    But the good news is that when I export to Excel and delete all those zero rows, I get exactly 700 rows, same as Aging!
    Same total, same no. of rows!
    If anybody could help me complete my query, I can continue. How can I eliminate these rows having zero balances? Where have I gone wrong?
    Thanks a lot.
    Leon Lai
    =========================================================================================
    SELECT distinct
    T1.CardCode,
    T1.CardName,
    T0.RefDate,
    CASE 
               WHEN T0.TransType=13 THEN 'IN'
               WHEN T0.TransType=14 THEN 'CN'
               WHEN T0.TransType=30 THEN 'JE'
               WHEN T0.TransType=24 THEN 'RC'
               WHEN T0.TransType=46 THEN 'PS'
               ELSE 'Error ! ! ! !'
    END AS 'Document Type',
    T0.Ref1 'Document Number',
    CASE 
               WHEN T0.TransType=13 THEN 'IN' + T0.Ref1
               WHEN T0.TransType=14 THEN 'CN' + T0.Ref1
               WHEN T0.TransType=30 THEN 'JE' + T0.Ref1
               WHEN T0.TransType=24 THEN 'RC' + T0.Ref1
               WHEN T0.TransType=46 THEN 'PS' + T0.Ref1
               ELSE 'Error ! ! ! !'
    END AS 'Concat',
    T0.Account,
    T0.Line_ID AS 'Row',
    T0.BalDueDeb,
    T0.BalDueCred,
    T0.TransId AS 'Id JDT1',
    (T0.BalDueDeb- T0.BalDueCred) AS 'Balance'
    FROM JDT1 T0 inner join ocrd t1 on t0.Shortname = t1.CardCode
    WHERE T1.CardType = 'C'
    PROBLEM IS HERE--??????????????--
    --and (T0.BalDueDeb - T0.BalDueCred) != 0       
    and Balance != 0
    -- The query gives different results depending on which of the above lines is run. Why?
    PROBLEM IS HERE--??????????????--
    ORDER BY T1.CardCode, T0.RefDate, T0.Ref1

    Dear Gordon,
    Thanks for your reply, and sorry for the incomplete reply which went beyond my control.
    Here are my results using WHERE (T0.BalDueDeb - T0.BalDueCred) !=0
    I have compared Aging Report with SQL Query.
    Doc Type  Aging Rows         Aging Total     SQL Rows    SQL Total*
    CN            57        -214,315.34     57        -214,315.34
    IN           452       4,741,436.41     452       4,741,436.41
    JE           134         202,209.56     267         201,584.56
    PS            12         107,652.40     18         121,352.40
    RC             4        -107,168.04     10        -120,243.04
               659       4,729,815.00     804        4,729,815.00
    The results are messy, time consuming to generate and investigate. Too much for newbee!
    The main differences lie in JE; about x2 rows in SQL Query.
    This may be due to rows that have reconciled in Aging, but appear in SQL Query.
    I have also prepared a list of Doc. Nos where there are differences, but too lengthy.
    TO Help you understand what's happening the foll. remarks may help:
    (1) The T0.Ref1 'Document Number' is empty for all JE. However, for other Doc types, these exist and agree with Aging.
    (2) Although 'Document Number' is empty for JE, there is a column Ref1 which does give a reference which agrees with Aging
    (3) A specific document always has 1 row in Aging, but may have several rows in my query
    (4) I do not know why using:  WHERE Balance !=0 works, but it does give a near perfect result. Why not use this as starting point? After deleting all the zero rows which it cannot delete, I GET EXACTLY the same result as SAP B1 8.8 Report 'Aged Analysis of Debtors'. Same no. of rows, Same total. How to delete these zeros in SQL?
    (5) In SAP B1 forum, it seems many persons still cannot arrive at the official Aging. I maybe near the correct solution, but no idea why it works.
    (6) I am continuing the struggle - maybe I need to put a sub query to eliminate the zeros first?
    Thanks
    Leon Lai

  • HT5035 Why did iphone app purchase did not use store credit balance?

    I just downloaded a new app on my iphone but it asked for me to verify my billing info. I did so and then checked in iTunes and I still have a balance from a gift card. Why was the balance not used?

    Discussion of Apple policies and decisions is not permitted here.

  • Why is my battery health decreasing so rapidly????

    I bought a new one like 3 weeks ago .. it has 10 cycles and the battery health has decreased from 98% to 95% in these last few days .. I usually have it connected to Ac power and discharge it like every 4 days.. thats the 10 cycles .. why would the health decrease this much???

    Apple battery or 3rd party battery?  Do you mean the overall charging capacity has dropped from 98% to 95%.  Mine has 15 cycles on it and it charges to 100% and if I leave it plugged in for a few days it will drop to 97% and that's perfectly fine.

  • In House Cash account balance did not reduce after executing F111

    Hi,
    This is regarding external payment via IHC.
    Subsidiary 3000 with IHC account 3000010 is paying Vendor A.
    3000 execute F110 payment run and AP open item is cleared.
    Payment order is generated and posted. Payment request is created.
    IHC 3000010 account balance decrease by the payment amount.
    IHC 1000010 account balance increase by the payemnt amount.
    Company code 1000 with IHC account 1000010 execute F111 to pay the external payment.
    After payment request is executed. Balance in 100010 does not decrease.
    Why is it so?
    I dont think this is correct. Appreciate your response and assistance.
    Cheers.

    Hi,
    This is regarding external payment via IHC.
    Subsidiary 3000 with IHC account 3000010 is paying Vendor A.
    3000 execute F110 payment run and AP open item is cleared.
    Payment order is generated and posted. Payment request is created.
    IHC 3000010 account balance decrease by the payment amount.
    IHC 1000010 account balance increase by the payemnt amount.
    Company code 1000 with IHC account 1000010 execute F111 to pay the external payment.
    After payment request is executed. Balance in 100010 does not decrease.
    Why is it so?
    I dont think this is correct. Appreciate your response and assistance.
    Cheers.

  • Confirmation quantity decreases

    hi all,
    I got an error , can any one please explain the possible answer.
    1. created a sales order for 20 quantity.save the order
    2. say the quantity is confirmed on 24 /09 - 20 quantity.
    3. then a fax will be sent to the customer saying that the material you will be receiving on 24/09.
    4. Run the back order processing/ rescheduling  in v_v2 transaction code.
    5. Now when we run v_v2 . the system will confirm the quantity on 25/ 09 - 15 quantity , and 28 /09 - 5 quanity.
    6. now the customer is asking that fax date is 24/09 unable to receive the same material.
    checking.
    1. checked all open orders for the customer.
    2. giving only one material.
    3. check is done based on the delivery priority not on date in V_V2 transaction code.
    4. customer have same delivery priority ie 1 - high priority.
    can any one please give the possible option why the system is decreasing the quantity.
    thanks
    Kuntla

    Dear Kuntla
    Possible reasons could be
    -  Delivery for the same material has been created against some other order
    -  Already an open order exists for the same material, which was created b4 this sale order
    As you may be aware, if there are two orders created in a different date for a particular material and stock will be confirmed to second order also.  Of course, this depends on your checking rule in customization settings.  But when you run V_V2, system will give priority to first created order and over and above the balance quantity only, stock will be confirmed to second order.  So check whether any other sale order for the same material exists.
    thanks
    G. Lakshmipathi

Maybe you are looking for