Why is my battery % getting lower even when my power adapter is connected

Hi!
Got my new macbook pro few months back. At first I loaded battery to full and totally empty about 3 times. Currently it has 14 cycle counts. I mainly use my computer with power adapter plugged in. When I charge it to 100% then afther time passes it goes 99%, 98%, 97%... but all this time my power adapter is plugged in. When I unplug it and run it on battery and then plug power adapter in again and when it reached 100% then again afther time passes and with power adapter still plugged in, it starts to go from 100% to 99..98..97%. At this time I usually unplug it, run it on battery and then again plug it in. Whatever the % when power adapter is plugged in (100%, 99%, 98%, 97%), Time view shows always "charged". I haven't let it drop more that 97% before I unplug it, run it on battery for a while and then plug it in again.
If I let it drop more than 97% (although power adapter is plugged in) will it eventually drop to 0% and time view still shows "charged" ?
All this time I have about 3 word documents open that I'm working on, 1 pdf document open and safari with different dictionaries all at once and time afther time I shearch the internet.
Is that normal with these applications running or not?
Why is that?
My older computer, macbook, when it's power adapter was plugged in, it always showed 100%.
Any word of advice?

That is normal behavior. The power will drop several percent before the charge function kicks in. If you leave it on power you'll notice it start to charge somewhere around 96% maybe 95%.
You can just leave it plugged in and it'll take care of itself.
Regards,
Captfred

Similar Messages

  • My iPad battery getting low quickly when im playing games. What should i do ?

    My iPad battery getting low quickly when im playing games. What should i do ?

    The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
    Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
    How to Calibrate Your Mac, iPhone, or iPad Battery
    http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
    At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
    Also, if you have a 3rd generation iPad, look at
    Apple: iPad Battery Nothing to Get Charged Up About
    http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
    Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
    http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
    New iPad Takes Much Longer to Charge Than iPad 2
    http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
    Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
    Extend iPad Battery Life (Look at pjl123 comment)
    https://discussions.apple.com/thread/3921324?tstart=30
    New iPad Slow to Recharge, Barely Charges During Use
    http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
    Tips About Charging for New iPad 3
    http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
    How to Save and Prolong the battery life of your new ipad
    https://discussions.apple.com/thread/4480944?tstart=0
    Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
    http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
    iPhone, iPod, Using the iPad Charger
    http://support.apple.com/kb/HT4327
    Install and use Battery Doctor HD
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    To Extend a Device’s Battery Life, Get to Know It Better
    http://tinyurl.com/b67c7xz
    iPad Battery Replacement
    http://www.apple.com/batteries/replacements.html
    In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
     Cheers, Tom

  • Why does my macbook only turn on when the power adapter is plugged in?

    The battery life says its at 73% and climbing but whenever I unplug my power adapter the mac automatically shuts down and if I try to turn on the macbook without my power adapter plugged in, it wont turn on. How do I make it go back to where I can turn the mac on without it being plugged in? Thank you for your help!

    I would try two things the first being resetting the System Management Controller:
    1) If the computer is on, turn it off.
    2) Disconnect the AC Adapter and remove the computer's battery.
    3) Press and hold down the power button for 5 seconds and then release the button.
    4) Reconnect the battery and AC Adapter.
    5) Press the Power button to restart the computer.
    If that doesn't work I would recalibrate the battery.
    To calibrate the battery:
    1) Plug in the MagSafe power adapter and fully charge the MacBook or MacBook Pro battery until the light on the MagSafe connector changes to green and the Battery icon in the menu bar indicates that the battery is fully charged.
    2) Allow the battery to rest in the fully charged state for two hours or longer. You may use your computer during this time as long as the power adapter is plugged in.
    3) Disconnect the power adapter with the computer on and start using it with battery power. When the battery's charge gets low, you’ll see the low battery warning dialog on the screen.
    4) Continue to keep your computer turned on until it goes to sleep. Save your work and close all applications when the battery's charge gets low and before the computer goes to sleep.
    5) Turn off the computer or allow it to sleep for five hours or longer.
    6) Reconnect the power adapter and leave it connected until the battery is fully charged. You may use your computer during this time.

  • Windows 7 will go to sleep without wakeup while booting in bootcamp. i have noticed that this happens when the power adapter is connected.

    okay the current issues after installing OS X Lion are:
    Windows 7 in bootcamp will go to sleep immediately during booting and will never comes back to life until the power cord is connected and disconnected several times. any solution?
    MS Office for Mac 2011 will refuse to update as it fails to detect the drive in which the previous version of office is installed. mine is installed in Machintosh HD but the update fails to find the program after dowloading the update file.
    Mac lion didnt even offer new backgrounds, live wallpapers or anything new except two little icons on desktop for Mission control and launchpad. On thhae other hand they have taken off the front row.
    Itunes interface is ancient. nothing magical. it just like the video players in linux. nothing modern or advanced.
    where is the customization for gestures?
    Its a disappointment that Mac is going the same way of ****** windows.

    That is normal behavior. The power will drop several percent before the charge function kicks in. If you leave it on power you'll notice it start to charge somewhere around 96% maybe 95%.
    You can just leave it plugged in and it'll take care of itself.
    Regards,
    Captfred

  • My phone seems to delete contacts and info when the battery gets low, is there a solution to this issue?!

    After the most recent update, I've noticed a couple MAJOR changes! 1) The battery life can barely make it through half the day. I have to keep charging it no matter how little I use it. I've even turned off apps running in the background, it didn't make much difference. And 2) When the battery gets really low, at the 10% mark, it deletes contacts and settings. I've lost so many contacts all of the sudden and I constantly have to restore my iPhone. It's so frustrating! And when the battery gets low, it also deletes my e-mail account to receive e-mails on the phone. I'm tired of having to constantly reset my phone carry a charger with me, it's not reliable any longer and I'm not sure why. Help??

    Here is some information on the applecare +:
    http://www.apple.com/support/products/iphone.html
    It appears that you have to buy the applecare within 30 days of buying your phone - you said that your phone warranty is almost over, so when did you buy it??? That could be the explanation for the error.

  • No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions in Disk Utility......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..it continues with 10.7

    No issues, but curious..why do I always get permissions repaired when I click on 'repair permissions' in Disk Utility ??......it usually has to do with core permissions and it's happened since i got this MacBook Pro in 3/11..I'll try this every 2/3 wks and always get repairs.....yet, I don't really have issues....it's been weird.......it continues with 10.7 and the update to 10.7.1.. a sample:
    Permissions differ on “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/da.lproj/UIAgent.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/da.lproj/MainMenu.nib”
    Permissions differ on “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”; should be -rw-r--r-- ; they are drw-r--r-- .
    Repaired “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/da.lproj/MainMenu.nib”
    Group differs on “Library/Preferences/com.apple.alf.plist”; should be 80; group is 0.
    Repaired “Library/Preferences/com.apple.alf.plist”
    Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

    As described in this article, don't worry about it:
    http://support.apple.com/kb/TS1448?viewlocale=en_US

  • I want to know what happens when the iPad battery gets fully charged and the charger is still connected

    When the battery gets fully charged, and the charger is still connected to the iPad, does the iPad use power from the battery or does it use the charger?

    Install Battery Doctor and see Battery Status or Charging
    http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
    System Status will indicate charged when charging circuit is disabled
    http://itunes.apple.com/sg/app/system-status-activity-manager/id401457165?mt=8&l s=1

  • All-in-one PC volume is too low even when maxed out

    When playing web content with sounds like youtube videos, the sound is too low even when the volume in the cotrol panel is already maxed out. what do i do?  My desktop is an hp 22 all-in-one touchsmart pc.
    Thanks!
    Cynch

    Hello @Cynch,
    I understand that you are having issue with your HP TouchSmart 22 All-In-One Desktop PC where the volume is low when listening to online content. I would be happy to assist you, but first I would encourage you to post your product number for your computer as there are various version of the HP TouchSmart 22. I am linking an HP Support document below that will show you how to find your product number. As well, if you could indicate which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this and the product number I can provide you with accurate information.
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • HT2954 In Mail Preferences Color & Fonts I select Georgia Bold Italic 14 for all fonts. Why do I only get Georgia 14 when writing?

    In Mail Preferences>Color & Fonts I select Georgia Bold Italic 14 for all fonts. Why do I only get Georgia 14 when writing messages/replies?

    Have you checked “Use classic layout”?

  • Just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

    just installed IOS 7.0.2 (11A501) on Iphone now the sound when I play music is too low even when I crank it as loud as it will go. I used to be able to hear it when I mowed the lawn. not anymore. any suggestions?

    This should solve the problem
    Settings > General > Reset > Reset All Settings
    It will not erase any of your personal data, just reset the settings.
    Hope this helps.

  • Why do I keep getting error 150210 when I attempt to download Adobe Reader XI

    Why do I keep getting error 150210 when I attempt to download Adobe Reader XI?

    Download and run the Offline installer from here: http://get.adobe.com/reader/enterprise/

  • HT1937 my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • Why do i keep getting this message when trying to view a movie: The shared library "iCloud Purchases" is not accepting connections at this time. Please try again later.

    why do i keep getting this message when trying to view a movie: The shared library “iCloud Purchases” is not accepting connections at this time. Please try again later.

    Same issue. What are they doing?
    Macbook Pro Retina Yosemite 10.10.2

  • Why do I keep getting an error when I try to sync my phone with iTunes?  It says I don't have enough privileges.

    Why do I keep getting an error when I try to sync to iTunes? The error says "you don't have enough privileges?"

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Why does Safari still accept cookies, even when I put Block Cookies "Always"

    Why does Safari still accept cookies, even when I put Block Cookies "Always",? There are always a list of every website with cookies. Is that just a record of what could've been accepted or its a bogus feature that still accepts regardless of what feature is on?

    Apple has rolled over users since OS X 10.6.8 when this issue first appeared.
    If you want a browser that actually CARES about it's users, then install Firefox, it's the only one that does.

Maybe you are looking for

  • I can no longer download store items

    I havn't been able to download updates/purchases or anything else all weekend.  Is anyone else experiencing problems, recent problems?  I've even tried d/l'ing previous purchases from the "cloud" but can't do that either, on ANY of my devices, from m

  • Which T400 models have LED backlit screen?

    Hey guys, I'm looking to buy a new Thinkpad T400, and because of the Inetrnational warrenty problems, I cant customize one on Lenovo.com. Hence I'm searching for a pre-configured model. The problem is I cant seem to find one that has the LED backligh

  • BAPI_PR_CREATE call error

    I am using IBM WebSphere Message Broker SAP Adapter request node to call BAPI_PR_CREATE, here is the input business object: <NS1:SapbapiprcrtWrapper xmlns:NS1="http://www.ibm.com/xmlns/prod/websphere/j2ca/sap/sapbapiprcrtwrapper"> <SapBapiPrCreate>  

  • Impact of new billing type introduction in SD on APO-DP

    Hello Experts, Our SD team is introducing a  new billing type. I would like to know any impact of the same in APO-DP, if yes, what are the pre-checks to done and precautions to be taken. (Currency used in APO is USD and SU as UOM) TIA.

  • CR2008 SP3 Full Build - Another version already installed?

    I'm switching to a brand new workstation so I'm trying to install CR 2008 SP3 Full Build. I've already installed the base software from our original license purchase (which is 10.0.0.683).  I downloaded SP3 full build so I can update that fresh insta