Why is my Cisco ER admin page is blank after I place and enter the username and password?
when i enter my username and password in the CER admin login screen my page is blank. Can anyone tell me why? BTW I restarted Cisco Tomcat and my Cisco Emergency Responder will not start.
Version: 10.0.2.10000-11
Yes i did.
the platform page works just fine. It is just when i login with the admin page does not load.I mean it is just a blank white screen.
it should still appear without certificates. I have attached a screen shot
Similar Messages
-
Hello,
I bought a WRT54G router about 2 weeks ago, ever since i have a problem with it. When i request the admin page, i login, works fine, but then the admin page stays blank. I have to reboot de router again, after that i see the normal admin page. But this will only last for max 1 day, then it stays blank again when i request it. I already upgraded to the latest firmware, but still the same problem. Anyone knows how i can fix this problem?
My Router version is 7. and my firmware is Firmware Version: v7.00.4Hi,
Download the latest firmware for the router & download the tftp.exe
Click here to get tftp.exe file.
upgrade the firmware for the router through TFTP ...reset the router & ur problem will be resolved !
Network Security Administrator (EC Council)
linksysfirmwares.googlepages.com/ -
SharePoint custom page it is asking login name and password
Hi Friends,
I have created custom pages in SharePoint 2013.When ever if I click any custom page it is asking login name and password every time.But for SharePoint admin page it is not asking every time login name and password.
How can we fix this issue.It is very urgent.Please can anyone help to fix this issue.
Thanks,
Tiru
TiruYes Inder is correct.
http://social.technet.microsoft.com/Forums/office/en-US/0e08f9cb-1939-428d-9194-d21975ef70d3/created-sharepoint-2010-custom-login-pagewindows-authentication-but-it-asks-me-for-credentials?forum=sharepointgeneralprevious
Use fiddler to check the root cause of the autentication issue.
Please remember to click 'Mark as Answer' on the answer if it helps you -
I updated my ipad mini to iOS 6.1.2 and have not been able to udate my apps in the AppStore since. It say I have updates available but the page remains blank. I have tried switching the unit off and on and to no avail. Can anyone help?
Try this:
1. Close all apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
2. Hold the Sleep and Home button down until you see the Apple Logo. -
I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???
You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.
-
Since Firefox v34, the Google Search results page is blank after, 1) Clicking on a link in a Google Search results page and loading the linked page, 2) Zooming in on the text on the page Google took me to, and then without resetting text zoom, 3) Clicking the Firefox 'Back' arrow to return to the Google search results. If at that point I either reload the Google results page, or click back a page and then forward again, the full search results are then displayed again.
This happens on my Windows 7 PC as well as my Vista Notebook. Is this a glitch with text zooming and Google in Firefox version 34?'''>>Type about:preferences#advanced<Enter> in the address bar.<'''
Setting that made no difference. I ran 30-40 test searches on Google with that set and Firefox restarted in Safe Mode with all add-ons disabled. The problem persists on the vast majority of searches. However backing up to Google search results after following some links doesn't result in the problem.
For instance when I do a Google search from www.google.com (USA) on [https://www.google.com/?gws_rd=ssl#q=%22Steve+Gibson%22+ "Steve Gibson"] and click the first result, which for me is his Wikipedia page: [http://en.wikipedia.org/wiki/Steve_Gibson_%28computer_programmer%29 "Steve Gibson (computer programmer) - Wikipedia"]. If I hit CTRL/+ a couple times to zoom text after the page loads, and then click Firefox's 'Back" icon, the previous Google search result page will be empty.
However if I click on the 2nd result in Google's search results, which for me is [https://www.grc.com/stevegibson.htm "GRC | Steve Gibson's WebZone:"], I can zoom the text several times and then click back to the Google search results and find them all displayed fine.
But I've been having this problem when backing up to Google search results probably 70-90% of the time since I updated from Firefox v33 to v34.
It's frustrating because Firefox seems to remember the text zoom level for entire domains. So if I zoom on one Wikipedia page, Firefox will display all Wikipedia pages I visit subsequently at that zoom level. I used to love this feature. But it's become a real pain now when I back up to Google.
BTW: If in the 1st example above, I first reset the text zoom level while I'm still on the Steve Gibson Wiki page, all the Google search results are displayed fine after I click Firefox's 'Back" icon. I don't have this problem in Chrome or Opera. -
Why I'm losing space on my internal HD, after i started to use the Time Machine, and after deleting all my files i still dont have any space on my internal HD?
Why I'm losing space on my internal HD, after i started to use the Time Machine, and after deleting all my files i still dont have any space on my internal HD?
-
I updated my iPads os now my email says the username or password is wrong why?
I updated my iPads os now my email says the username or password is wrong why?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release].
-
why does creative cloud is still asking serial number after i purchase and it wouldn't let me use it anymore because my trial is over need help NOW PLZ
Hi There,
Kindly try the following steps:
Sign out and sign in to Creative Cloud app: Sign out, Sign in | Creative Cloud Desktop app
Sign in, activation, or connection errors | CS5.5 and later
Thanks.
Atul Saini -
Port forwarding Cisco 857W + admin page viewable externally
I would like to open UDP port 22335, and TCP port 80 on my local server 10.10.10.50. I've been having a heck of a time getting this to work, as I don't really understand access lists and what is required.. also, for some reason my firewall is open to the outside world on port 443 (you can browse and see the admin access page) I don't recally setting this up!! Can someone help me fix all this? Config is as follows:
Thanks a million guys!
CiscoMan
This is the running config of the router: 10.10.10.1
!version 12.4
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname **************
boot-start-marker
boot system flash c850-advsecurityk9-mz.124-15.T15.bin
boot-end-marker
logging buffered 51200
logging console critical
enable secret 5 **************
aaa new-model
aaa session-id common
clock timezone CST -6
clock summer-time CDT recurring
crypto pki trustpoint TP-self-signed-2488767310
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2488767310
revocation-check none
rsakeypair TP-self-signed-2488767310
crypto pki certificate chain TP-self-signed-2488767310
certificate self-signed 01
<cert here>
quit
dot11 syslog
dot11 ssid ***********
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 ******************
no ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.99
ip dhcp excluded-address 10.10.10.201 10.10.10.254
ip dhcp pool ccp-pool1
import all
network 10.10.10.0 255.255.255.0
dns-server *********
default-router 10.10.10.1
ip cef
ip inspect log drop-pkt
ip inspect name SDM_MEDIUM appfw SDM_MEDIUM
ip inspect name SDM_MEDIUM cuseeme
ip inspect name SDM_MEDIUM dns
ip inspect name SDM_MEDIUM ftp
ip inspect name SDM_MEDIUM h323
ip inspect name SDM_MEDIUM https
ip inspect name SDM_MEDIUM icmp
ip inspect name SDM_MEDIUM imap reset
ip inspect name SDM_MEDIUM pop3 reset
ip inspect name SDM_MEDIUM rcmd
ip inspect name SDM_MEDIUM realaudio
ip inspect name SDM_MEDIUM rtsp
ip inspect name SDM_MEDIUM esmtp
ip inspect name SDM_MEDIUM sqlnet
ip inspect name SDM_MEDIUM streamworks
ip inspect name SDM_MEDIUM tftp
ip inspect name SDM_MEDIUM tcp router-traffic
ip inspect name SDM_MEDIUM udp
ip inspect name SDM_MEDIUM vdolive
no ip bootp server
ip domain name yourdomain.com
ip name-server *******
ip name-server *******
appfw policy-name SDM_MEDIUM
application im aol
service default action allow alarm
service text-chat action allow alarm
server permit name login.oscar.aol.com
server permit name toc.oscar.aol.com
server permit name oam-d09a.blue.aol.com
application im msn
service default action allow alarm
service text-chat action allow alarm
server permit name messenger.hotmail.com
server permit name gateway.messenger.hotmail.com
server permit name webmessenger.msn.com
application im yahoo
service default action allow alarm
service text-chat action allow alarm
server permit name scs.msg.yahoo.com
server permit name scsa.msg.yahoo.com
server permit name scsb.msg.yahoo.com
server permit name scsc.msg.yahoo.com
server permit name scsd.msg.yahoo.com
server permit name cs16.msg.dcn.yahoo.com
server permit name cs19.msg.dcn.yahoo.com
server permit name cs42.msg.dcn.yahoo.com
server permit name cs53.msg.dcn.yahoo.com
server permit name cs54.msg.dcn.yahoo.com
server permit name ads1.vip.scd.yahoo.com
server permit name radio1.launch.vip.dal.yahoo.com
server permit name in1.msg.vip.re2.yahoo.com
server permit name data1.my.vip.sc5.yahoo.com
server permit name address1.pim.vip.mud.yahoo.com
server permit name edit.messenger.yahoo.com
server permit name messenger.yahoo.com
server permit name http.pager.yahoo.com
server permit name privacy.yahoo.com
server permit name csa.yahoo.com
server permit name csb.yahoo.com
server permit name csc.yahoo.com
username ********* privilege 15 secret 5 ************************
archive
log config
hidekeys
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
bridge irb
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip route-cache flow
no atm ilmi-keepalive
dsl operating-mode auto
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
no ip redirects
no ip unreachables
no ip proxy-arp
pvc 0/35
pppoe-client dial-pool-number 1
interface FastEthernet0
shutdown
interface FastEthernet1
interface FastEthernet2
shutdown
interface FastEthernet3
interface Dot11Radio0
no ip address
encryption vlan 1 mode ciphers aes-ccm
broadcast-key vlan 1 change 30
ssid ********
speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Dot11Radio0.1
encapsulation dot1Q 1 native
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
no ip address
bridge-group 1
interface Dialer0
description $FW_OUTSIDE$
ip address negotiated
ip access-group 101 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip inspect SDM_MEDIUM out
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip route-cache flow
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username ******** password 7 ********
interface BVI1
description $ES_LAN$$FW_INSIDE$
ip address 10.10.10.1 255.255.255.0
ip access-group 100 in
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
ip route-cache flow
ip tcp adjust-mss 1412
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip nat inside source list 1 interface Dialer0 overload
logging trap debugging
access-list 1 remark INSIDE_IF=BVI1
access-list 1 remark CCP_ACL Category=2
access-list 1 permit 10.10.10.0 0.0.0.255
access-list 100 remark auto generated by SDM firewall configuration##NO_ACES_3##
access-list 100 remark SDM_ACL Category=1
access-list 100 deny ip host 255.255.255.255 any
access-list 100 deny ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip any any
access-list 101 remark auto generated by SDM firewall configuration##NO_ACES_13##
access-list 101 remark SDM_ACL Category=1
access-list 101 deny ip 10.10.10.0 0.0.0.255 any
access-list 101 permit udp host ******* eq domain any
access-list 101 permit udp host ******** eq domain any
access-list 101 permit icmp any any echo-reply
access-list 101 permit icmp any any time-exceeded
access-list 101 permit icmp any any unreachable
access-list 101 deny ip 10.0.0.0 0.255.255.255 any
access-list 101 deny ip 172.16.0.0 0.15.255.255 any
access-list 101 deny ip 192.168.0.0 0.0.255.255 any
access-list 101 deny ip 127.0.0.0 0.255.255.255 any
access-list 101 deny ip host 255.255.255.255 any
access-list 101 deny ip host 0.0.0.0 any
access-list 101 deny ip any any log
dialer-list 1 protocol ip permit
control-plane
bridge 1 protocol ieee
bridge 1 route ip
banner login ^CAuthorized access only!
Disconnect IMMEDIATELY if you are not an authorized user!^C
line con 0
no modem enable
transport output telnet
line aux 0
transport output telnet
line vty 0 4
privilege level 15
transport input telnet ssh
scheduler max-task-time 5000
scheduler allocate 4000 1000
scheduler interval 500
endHi Bro
As mentioned by jcarvaja above, you’ll need to enable PAT (Port Address Translation) simply because you’ve a single WAN IP Address.
Here are the commands that you should insert;
ip nat inside source static tcp 10.10.10.50 80 interface Dialer0 80
ip nat inside source static udp 10.10.10.50 22335 interface Dialer0 22335
ip nat inside source static udp 10.10.10.50 22336 interface Dialer0 22336
ip nat inside source static udp 10.10.10.50 30175 interface Dialer0 30175
ip nat translation timeout 600
ip nat translation tcp-timeout 600
ip nat translation udp-timeout 600
ip nat translation syn-timeout 600
ip nat translation icmp-timeout 600
Moreover, the reason as to why your Router’s admin page is widely expose to the Internet cloud is simply because you’ve enabled the http services.
Here are the commands that you should insert;
no ip http server
no ip http secure-server
P/S: if you think this comment is useful, please do rate them nicely :-) and click on the button THIS QUESTION IS ANSWERED. -
ERecruitment external candidate registration pages goes Blank after SPS7
HI All ,
We have recently upgraded our system from NW 701 SPS3 to SPS7 .
Information :
Our eRecruitment setup is , External candidates will login through a
different server and we have eRecruiting integrated with the ERP but with
the frontend for the External Candidate on a different
server.
We have checked the SICF nodes (active)and Trex working fine , however when a
candidate registration page or job search is opened the page remains
blank .
The logs in SM21 are as below when we tried to reproduce the same .
RCF_UNREGSER R2 G HTTP/RFC session has been deleted following timeout
Can you please guide us on this .
Regards
RahulHi all ,
I myself resolved the issue thanks
Regards
Rahul Shady -
Why do I get a message that says "your account cannot be authenticated. If you have recently changed your email password please enter the the most current password in settings to continue...? I can't get my email. Help!
Hi there ninjajune! We understand the importance of receiving e-mails! Which e-mail account are you having this trouble with? Have you tried to delete the e-mail account and add it back? What is the make and model of your device? Additionally, are you able to access the e-mail account from a PC? Looking forward to your reply so tha I can better assist!
LenaA_VZW
Follow us on Twitter @VZWSupport -
Why when I try to access icloud on my iphone does it tell me wrong username or password
I can go to Itunes and log in using the same username and password but icloud still tells me that my username and password are wrong. I have changed my password several times thinking that maybe I have done something wrong and I still get the same message. Why is that?
I am having the same issue. Not syncing mail as a result.
-
Dear Apple Lovers,
I am using ipad 2 Wifi + 3G 64 GB, I had updated my ipad from ios 4.1.3 to ios 7.0.1 three week ago.
After that All aplication and all file can be opened properly well.
The problem came after I updated Keynote, Pages & Numbers, all files could not be opened & all file name is change from alphabetical to numerical. All file content 2 type of file, 1 BuildVersionHistory and the other one is index.
if i open the file ... spreadsheet can't be imported... the file format is invalid
or in Pages...
document can't be imported... the file format is invalid...
If I want to share that document via icloud ... Can't Send Spreadsheet.. To send this spreadsheet, open it in Numbers for iOS first.
In other case... I create a new file in Pages, Numbers or Keynote.. but all the new files can't view in Tab Apps when my ipad is connected to my mac pro via iTunes. If I create a file using other aplication (example using DocToGo), a new file that is created can be seen directly in iTunes Tab Apps DocToGo.
in this morning when i open Numbers all my files are disappear including new file without the reason at all, please give me the best solution. I need your help very very urgent.... since my working datas is very very important.
Thanks and Best Wishes,
AsdansThere may well be circumstances where documents in the cloud doesn't work for some people.
I myself have projects like you do, however our circumstances may be different or I may simply organise myself in a different way.
I tend to use documents in the cloud for working documents in progress, once they are completed they are then filed away in a more appropriate location. I do not try to use documents in the cloud for syncing my entire work history. -
Cisco UCCX admin page wont display
Hi,
I have setup my CCIE Voice lab at home and running UCCX 7. Everything was working perfectly, but now the appadmin page will not display. Is there a service I need to restart or do I need to reinstall the UCCX.
Thank youHave your restarted the tomcat service?
Maybe you are looking for
-
Domicilio Fiscal , UF e Codigo de Pais
Prezados, Estamos com a seguinte situacao: Cliente está na ECC 6.0 apos uma migracao meramente técnica, mas todas as configuracoes e cadastros (impostos, e etc.) estao na época da 3.0F, e obviamente usam TAXBRJ. Vi todas as documentações e dicas ref.
-
Problem with checking file existence by using app.openDoc
Hi Folks, I have to create a script for a big project with many PDF's. (Just like Ingrimm - it's the same company http://forums.adobe.com/thread/747022?tstart=0) This PDF's are made of scanned images. I need to rename the files to names that are extr
-
Hello sir, I have create 1 java class file which connects to SAP DB through RFC connection. I have put sapjco3.dll,librfc32.dll,sapjcorfc.dll in to the folder windows\system32. Its working fine on windowsXP, but not working on Windows Vista and windo
-
How to register as an Apple affiliate?
I have followed http://www.apple.com/itunes/affiliates/resources/documentation/itunes-app-store- affiliate-program.html and registered on Eroupe Trade Doubler (Russia) affiliate programm. But I don't know how to proceed further. What should be done n
-
Issues creating VSA cluster "Unknown value" error
Hi all, I'm in the process of evaluating vSphere with VSA and running into an issue during creation of the VSA cluster. On the final step of creating the VSA cluster, I get an error message "Cannot create VSA cluster: Unknown value." I'm setting up a