Why is my collada 3D file not acceptable to iBooks author?

I followed the instructions within iBooks Author, and obtained a (free) Collada 3D file with extension .dae.
iBooks Author doesn't accept this file.
How do I progress with my project?

Seen this document?
iBooks Author: Best practices for using 3D models - Support - Apple
If still no joy, you may need to find another source for this type of asset.

Similar Messages

Why am I getting print file not accepted?

I'm using a HP LaserjetP1102W
Print file not accepted? No idea why?
It's been saying Printer Not Connected.
I'm using Safari and would like to print coupons.
Hope this is the right place to post this.
Thanks!

Hello lostvalleyfarm,
It sounds like you are not able to print to your HP Laserjet. I recommend following these steps to troubleshoot the issue you are experiencing:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/ts3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

Why is netbook with c60 processor not accepting the download of drivers online & cannot use bluetoot

why is netbook with c60 processor not accepting the download of drivers online & cannot use bluetoot

https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bugs or feature requests
Error: "Unable to sync files"

Why will my java.jar file not open

Why will my java.jar file not open

This is the iPod touch forum. Do you have a question concerning an iPod touch? The iPod touch does not run Java.
If you have a new Mac you have to download the Java program to run Java on a Mac. It no longer comes with the iOS.

Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer? I am using the same password for both.

Why is my user id/pw not accepted by ICloud on my iPad but it is accepted by iCloud on my computer? I am using the same password for both.

Rebooting your iDevice
Hold down the Sleep (On-Off) and Home buttons together for about 10-15 seconds or until the Apple Logo appears - ignore the red slider if it appears - then let go of the buttons. The device should begin to start up.
Now try entering the information again. See if it works now.

"URLs with .file not accepted"

Just upgraded to Lion OS 10.7. When I try to search for an upgrade, I get the message URLs with .file not accepted. Anyone know what the problem is?

Inspector will not launch in ibooks author

Been working happily on a book, and now Inspector will not launch in ibook author so I can't add any hyperlinks.
I can't find a workaround. Media and other tools are working fine. I tried closing and re-opening app and shutting down my mac mini. Issue persists.
Anyone had this?
thanks!

I found this about the same issue in iworks and it worked: substituting "ibooksauthor" for "iworks"
thanks to poster: cm752004
Re: Frozen Inspector Aug 20, 2007 2:52 PM (in response to chelseabees)
Hello,
You should try to delete the iWork/Keynote preference files in:
Your user folder/Library/Preferences
and
Your user folder/Library/Preferences/ByHost
Their names are "com.apple.iwork08.plist", "com.apple.iwork.keynote.plist", ... etc.
You should quit iWork/Keynote before doing this.

Apple associated publishers for Ibook Store (example: Lulu, SmashWords) have not support for Ibook Author native format (.ibook)

Apple associated publishers for Ibook Store (example: Lulu, SmashWords) have not support for Ibook Author native format (.ibook) how ebook source. Only Word archives are supported.
Obtain TAX ID for non USA resident is impossible without pay to much money.
How to publish in Ibookstore a non USA resident author, in new Ibook Author format?

Regardless of what format you want to use, you can't publish in the iBookstore without meeting Apple's requirements, so if you find those too difficult, you need to go elsewhere.

Ibooks author file not accepted by itunes producer

I have completed a book with an Ibooks author file size of 830MB; it is not being accepted by itunes Producer for upload. Do I need to export it to IBooks format? I did this export but the resulting file is just 77MB. I did not try to upload it via Itunes Producer as it seems to small to be correct. ????????

Thanks this helped but not enough. I was trying to feed the I books author file directly. So, i went to File/publish and created a file labeled ITMSP. Then went back to the Publisher wizard. I was unable to load the ITMSP file but the Publication window in ITUNES Producer has the Ibook file I exported from IBA in it. I continued through the wizzard but chose not enter a target audience. When I got to the end and clicked on the button to send to Apple it went through a verification process and flagged the lack of target audience. So I went back and entered 13 and up. But the same error keeps occuring and I can not proceed. Any ideas on the following
1. How I clear the error message now that I have entered the right data
2.Is the Ibooks export the file that should show in the produce window, or should it be the ITMSP file that wont load there?

Mac won't print; says print file not accepted

My macbook pro won't print to a new wireless printer that I have; no matter what kind of file I'm printing (doc, pdf, jpg, etc), it says that the print file is not accepted. I've even used a usb cable to connect it directly to the printer and it still won't print; My computer recognizes the wireless printer, but does not print to the printer; It does however print to another printer that I have wirelessly, just not the new one. Any ideas on what I can do to make this work? I've even called Epson (new printer) and they can't figure it out...

Does another computer print to the new printer? You can try resetting the printing system Mac OS X: How to reset the printing system but I would suspect that the new printer may be faulty.

Provision files not accepted

Hi,
my customer gave me the distribution and developer mobileprovison files that i need to create the app in the app builder. He also gave me the two p12 certificates, to download the app later as a zip-file. He creates all certificates with his own Apple developer ID, i have also his pw that is needed to identify the p12 certificates. Now when i want to create the zip-file, the app builder stops at the moment, when i want to upload the two mobileprovision files (after the step icons upload...). The fields get "red" and i can't do anything to go forward.
What can i do? I've read that sometimes the mobileprovision files are not accepted and you have to create new ones. When so, must my customer also create new p12 files, or is ist possible to work with the old ones (i don't think so)?
Very difficult to work so - but my customer wants to upload the app with his own account and only need the zip-file.
Thank you for your help
Nicole

That's probably it, I bet they generated the certificates with a wildcard bundle ID which I don't believe works with single edition.
Neil

Why are my Soundtrak AIFF files not readable to an audio CD player?

I am new to using Soundtrak and I am sure this is an elementary question for you experienced guys, but why will an audio cd player not recognize the .aiff files that Soundtrak creates jut by copying the file to a CD? It seems as if the only way I can make a copy that a CD player will recognize is to import it into iTunes, convert it and burn it to a CD from there.
Thanks,
Ricky

Ricky,
In order for a CD player to read .aiff files as music, they must be burned to a CD-R as audio not data files. If you just copy the files to a CD I think you may be putting data files on it which only a computer could read. I use Roxio Toast to burn my music CDs and it gives you a choice of data or audio burning. There are lots of other applications out there that can do that.
David

Why is the transaction log file not truncated though its simple recovery model?

My database is simple recovery model and when I view the free space in log file it shows 99%. Why doesn't my log file truncate the committed
data automatically to free space in ldf file? When I shrink it does shrink. Please advice.
mayooran99

My database is simple recovery model and when I view the free space in log file it shows 99%. Why doesn't my log file truncate the committed
data automatically to free space in ldf file? When I shrink it does shrink. Please advice.
mayooran99
If log records were never deleted(truncated) from the transaction log it wont show as 99% free.Simple recoveyr model
Log truncation automatically frees space in the logical log for reuse by the transaction log and thats what you are seeing. Truncation wont change file size. It more like
log clearing, marking
parts of the log free for reuse.
As you said "When I shrink it does shrink" I dont see any issues here. Log truncation and shrink file is 2 different things.
Please read below link for understanding "Transaction log Truncate vs Shrink"
http://blog.sqlxdetails.com/transaction-log-truncate-why-it-didnt-shrink-my-log/

Why my billing payment method is not accepted

My way of payment is not accepted,

Okay.
That's about all I can say given the information you have provided. If you are trying to do something involving the store in another country realize you have to have a payment method valid for that country which involves billing to an address in that country. Anything else and you really have to tell us more about what payment method, where, etc.

Lion Server: Why is our Code Sign Certificate not accepted ?

Hello,
our Lion Server (10.7.5) is running fine, but since we restored it from a back-up Profile Manager no longer accepts the Code Signing certificate despite the fact that it is shown as valid in Server App's Manage Certificates.
I tried everything from deleting the device manager postgrep db, and restoring it as described in
https://discussions.apple.com/thread/3791994?start=0&tstart=0
Backup and delete db:
sudo pg_dump -U _postgres -c device_management > $HOME/device_management.sql
/usr/share/devicemgr/backend/wipeDB.sh
Restore the db :
sudo serveradmin stop devicemgr
sudo serveradmin start postgres
sudo psql -U _postgres -d device_management -f $HOME/device_management.sql
sudo serveradmin start devicemgr
I tried to recreate the Code Sign certificate as described in:
http://support.apple.com/kb/HT5358
The certificate is successfully created but it is just NOT accepted. (It does not show in the "Sign Configuration Profiles" dialog)
I would be very, very grateful for a hint.
(When running the server from the external clone, from which we copied the server back, the problem is not present)
Regards,
Twistan

This also applies to the 470 IDES install!
Any ideas?
Tx JB

Why is my collada 3D file not acceptable to iBooks author?

Similar Messages

Maybe you are looking for