Why is my computer doesn't recognize my Ipod Touch?
My computer doesn't recognize my Ipod Touch. Any suggestion?
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Similar Messages
-
My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
My Windows 8.1 computer doesn't recognize my iPod nano 7th generation. Why?
When I connect my iPod to my computer, nothing happens. I've read the tips in the section "support" and I noticed that maybe Windows 8 is not one of the operating systems that are compatible with an iPod nano 7th generation. If I'm right, what can I do if my only device is a Windows 8?Hi, Grafiti.
Thank you for the question. Below, I have attached a couple troubleshooting articles that will help resolve the device not being recognized by iTunes.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
If the issue still persists after processing these steps, see the section in the article below labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8.
Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
My computer doesn't recognize my ipod, why?
My computer doesn't recognize my ipod, why?Can u help?T.you (i'm french)
http://support.apple.com/kb/ts1369
-
After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?
Refer to this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538 -
My computer doesn't recognize my ipod
My computer doesn't recognize my ipod. It is not visible in iTunes or in the computer icon
Click here --> iOS: Device not recognized in iTunes for Windows
-
My computer doesn't recognize my ipod when I plug it in.
My computer doesn't recognize my ipod when I plug it in. This happened after my daughter connected her ipod to my pc.
Try here:
iOS: Not responding or does not turn on
Next make an appointment at the Genius Bar of an Apple store. -
My computer won't recognize my iPOD Touch even though it does recognize my Clasic and Nano. Any suggestions?
Well, now I feel like an idiot. I was using TWO CORDS. Ya, don't make my mistake. The one I had a problem with was made by a company that was not apple, and it was for CHARGING. I bought it with charger, and that's all it can do. It doesn't send data like the real cable. So, check your usb cables. :S
-
My computer no longer recognizes my iPod Touch. And the iPod Touch does not recognize that it is connected to a computer. It has worked great for many days until today.
I’ve tried two different Apple cables.
I’ve tried different USB ports on the computer.
I have rebooted both the Mac and the iPod.
I’ve wiggled the cables and checked for dust in the connectors.
The iPod charges using this same cable connected to wall wart. That’s a good sign.
Both the Mac and iPod seem to work fine separate from each other. They just won’t talk anymore.
Mac mini
1.83 GHz Intel Core Duo
OS 10.4.11
iTunes 9.2.1
iPod Touch 32GB, version 3.1.3 (7E18), model PB533LLI found this possible solution on another support thread, so I tried it.
turn off iPod
hold Sleep and Home buttons to start it.
When Apple appears, let go of Sleep button, but keep holding Home button.
When screen goes blank, let go of Home button.
Connect cable and check iTunes to see if it has conencted.
This did not work for me.
I then turned off the iPod, restarted the Mac, and restarted the iPod normally.
I connected them with the cable, and it works like normal. :-) -
Mac OS X 10.6.3 doesn't recognize my iPod touch 3.1.3
Help please. My Mac OS X 10.6.3 doesn't recognize my iPod touch 3.1.3, I am using Xcode 3.2.3 now. My iTunes is 9.2.1(5). What will I do?
Have you tried here:
Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Is there any reason your OSX is not updated to the latest 10.6.7 and iTunes to 10.2.X? That may also help. -
My computer doesn't recognize my ipod nano 2nd gen
My computer running Windows 7 doesn't recognize my ipod nano 2nd gen. Also my ipod not seen in my itunes. I did all the reset stuff and nothing works. Do you think it is just shot???
Make sure you have the latest version of iTunes. Are you a Mac or PC user?
Hm so have you also tried completely erasing your iPod? -
Computer doesn't recognize that ipod is plugged in
So I've had this ipod for at least a year now and have been using the same computer for the past 7 months and it's always worked fine. Now all of the sudden my computer doesn't recognize that it is plugged in. It's not even that it doesn't recognize the USB device it's not there period. I tried manually putting it into disk mode but it still didn't recognize it. Please help!!
http://discussions.apple.com/message.jspa?messageID=11359368#11359368
-
My computer doesn't recognize my iPod and therefore will not sync my new music
When I plug my iPod up to my computer, my computer doesn't recognize that the iPod is plugged in. I've tried reinstalling iTunes and this iPod has synced with this computer before.
Hy there,
In order for you to solve this problem you have to follow these stept if your running windows:
1'st step is to go into the device manager
2 step is to go to portable devices (it is right under network adapters)
3 step is to right clic apple ipod and click update drivers
4 step is to brows your drivers from C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
After that your itunes will pump up alown and youl see your iphone right there.
If these doesent work try restarting your device and then see what happens.
Good luck and sry for my bad righting.
Andrei -
My computer (PC) will not recognize my ipod touch anymore. When I plug it in, it says the USB device attached to this computer has malfunctioned and windows does not recognize it. I have tried attaching the same cord and ipod to a different computer and it is recognized by our mac. I have tried restarting the ipod, downloading all updates on my pc, restarting the pc, etc. Nothing has worked. Please advise.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7 -
I updated to iTunes 10.2.2, and now it doesn't recognize my iPod Touch!
I updated my computer to Snow Leopard, and I was prompted to update iTunes to 10.2.2. Okay, did that. Now iTunes doesn't recognize my iPod whatsoever! But my computer does as a whole: i.e., Aperture automaticaly opens as it usually does when I plug in my iPod.
So this is great. And there's no bug fix; I've googled for the past hour now. Is anyone else having this issue and is there a fix? Because for now, I can't update my iPod at all!Have you seen this article yet?
http://support.apple.com/kb/ts3540
If nothing else, try upgrading to iTunes 10.3.1.
B-rock -
I updated my itunes and now it doesn't recognize my ipod touch
Ever since I updated my itunes to the latest version, it doesn't recognize my ipod therefore I can't sync new songs onto it.
I tried following these apple help steps http://support.apple.com/kb/TS1363?viewlocale=en_US but am stuck on #4-11...for some reason I can't delete the Temp folder because it's saying I still have a program open but I'm sure I've closed everything!You want this article. The article you cited is for regular iPod, not iPS Devices (iPod touch, iPhone and iPad)
iOS: Device not recognized in iTunes for Windows
Maybe you are looking for
-
Receiver File Adapter - Encoding issue.
Hi Everybody, The file format (encoding) is different to the format generally we used to get. Currently we are get the flat files in DOS format.The current file when we are downloading it we are getting it in the UNIX or other format. For eg: 20 has
-
How to design constructor with variable parameters?
I'm working on a "project" where I need to make a class "book" that can store information about a book. It's name, isbn, stock, etc... What is throwing me off a little bit is the author. I'm allowed to enter up to 4 authors per book object. I'm comin
-
Language Import Error using Transaction SMLT - STRALAN_MSAG 075
Hi , My current client required Chinese Language - ZH (Chinese Simplified) in ECC 6.0 SR3 Unicode System As per procedure, i have added chinese language 'ZH' using i18n -> i18n Customising -> i18n System Configuration menu. Later in Transact
-
Hi, I have collected a Role in a TR say ABC12345. this TR is not released But now i think that this TR is not required to be moved to Producation. Hence please tel me whether i can delete the TR in SE09 or it will delete some other objects also. Th
-
I had created a collection in Bridge for CS6. Today I installed BridgeCC. I can't find the collection. How do I get what I had in the previous Bridge to show up in CC Bridge? Eric