Why is my computer screen is gray its not starting up help
I need help restarting my MAC PRO I turned it on and the screen is grayish try to start and wont start please HELP!!!!!!
if you infact have the MAC PRO desktop computer, then post your question here https://discussions.apple.com/community/desktop_computers/mac_pro
or tell us what OS you're on and which Mac Pro you have. (however the link is the mac pro discussions of this site and you may have better responses there).
Similar Messages
-
I cant open my iphone, its showing that ( iphone is dsabled, connect to itunes) when i connect to itunes its showing message on computer screen that ( itunes could not connect to the iphone, because it is loked with passcode. you must enter your passcode on your iphone to connect with itunes.
appreciatedPlace the iPod in recovery mode and then restore the iPod to factory defaults/new iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.
Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Why my apps are not transferring from PC to iPhone 5? When I connected to PC the icon shows when I select apps it show 'will install' but it never show on iPhone, I re installed iTunes, deleted all apps and downloaded again but its not working pls help.
Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.
-
im going to go to apple to show my phone that my wi-fi wasnt working and now iv droped my phone and the hole screen came out, its not smashed it just came out, butstill works, so now im worried apple my wont take care of it, what will they do ?? it was a bran new phone
You are correct to worry. There is no way for Apple to know if the wifi problem was before or after the drop. If you have Apple Care +, you can get a replacement device for a deductible. If not, user damage is not covered under the warranty or regular Apple Care. You would need to see if they will repair the screen (at your cost), or if you would have to purchase an out of warranty replacement.
-
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?
I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymoreHello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M. -
my ipad mini and iphone 4s are not connecting over bluetooth. iphone cannot locate ipad mini or says it is not supported. It used to work perfectly but now its not working. please help.
Hi
Thanks for the support but I had already tried this . Again did it as you advised. Still not able to connect the ipad mini with Bluetooth.
Could it be that some app is causing issue. I can connect my car and computer over Bluetooth but not ipad mini.
On the other had ipad is connecting to other iPhone but only not mine.
Still showing ipad not supported message. And also shows not paired.
Please help. -
Java server0 its not starting with error -11113
Dear Experts team,
When We are starting SAP Solution Manager 7.10, Its ABAP Instance is running file ,
But Java Instance not running , In this Java Process table , SDM and dispatcher is working file (green)
But in server0 its not starting and -11113 (core service or addition service start fails)
When check Developer Trace of dev_server0 , it show last few lines as given below,
Thr 5464] JLaunchIExitJava: exit hook is called (rc = -11113)
[Thr 5464] **********************************************************************
[Thr 5464] *** ERROR => The Java VM terminated with a non-zero exit code.
[Thr 5464] *** Please see SAP Note 943602 , section 'J2EE Engine exit codes'
[Thr 5464] *** for additional information and trouble shooting.
[Thr 5464] **********************************************************************
[Thr 5464] JLaunchCloseProgram: good bye (exitcode = -11113)
Please suggest ...
Thanks
Regards
Sunil kHi,
Hope you are doing good.
Please check the latest STD_SERVER0 and the default traces and attach the contents here. This should have the error details. Exit code 11113 means that some essential service fails to start so the server/dispatcher process fails.
Thank you!
Kind Regards,
Hemanth
SAP AGS -
I have a macbook version mac os x 10.4.11 and im trying to download PAGES however its not working! help!!!
The latest iWork '09.2 requires 10.7 Lion. You can go onto eBay and get the '09.0 or the '08 version which will work with 10.4. http://en.wikipedia.org/wiki/IWork
iWork '09 http://www.ebay.com/sch/i.html?_sop=12&_ssov=1&_fln=1&_sacat=0&_sc=1&_nkw=iwork+ 09&rt=nc
iWork '08 http://www.ebay.com/sch/i.html?_nkw=iwork+08&_sacat=0&_odkw=iwork+09&_sop=12&_ss ov=1&_osacat=0&_fln=1&_sc=1 -
BLACK SCREEN stating "windows could not start because the following is miss
I installed Bootcamp update 2.1 and then XP SP3.
Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
I tried to use the option key and insert the Windows CD but it won't start up.
Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I just force powered off & booted into Mac.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
Sure is annoying,
Good luck! -
i have not used ipad from last 1 year and now its not starting any suggestion how to start,
Using the Supplied iPad charger, Connect it to the mains for at least 60 minutes...
Then try to turn it on. -
When i start my mac system its produce sound and its not started.
when i start my mac system its produce sound and its not started. what i do for solving this problem. can anybody help me?
can any body tell me what is problem occour in my mac?https://discussions.apple.com/thread/3054726?tstart=0
-
Why is my downloaded Lightroom CC (2015) does not start? The download is successful otherwise okay. The shortcut appears on the desktop etc. But the program does not start.
Thank you help ! [?]
2015-04-29 19:58 GMT+02:00 kglad <[email protected]>:
Why is my downloaded Lightroom CC (2015) does not start? The download
is successful otherwise okay. The shortcut appears on the desktop etc. But
the program does not start. created by kglad
<https://forums.adobe.com/people/kglad> in *Creative Cloud Download &
Install* - View the full discussion
<https://forums.adobe.com/message/7495290#7495290> -
I have up dated my apple tv software but its not starting up, the light just constantly blinking
i have recently update my apple tv software, but its not starting up. it constly blinking.
Hi, sitzmark128.
Sometimes a simple power cycle of your your wireless network can resolve some AirPlay issues. I would also recommend closing any open applications in multitasking and restarting the device. If unfamiliar with multitasking, I have included a screenshot on how to process an application close.
If the issue persists after processing these steps, see the article below.
Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts4215
Cheers,
Jason H.
Maybe you are looking for
-
My wifi only ipad does not find my new address since moving house
i moved house 5 months ago but Google Maps and Google Earth show my current location as my old address. Is there a way to resolve this problem?
-
How to set the text of a cell in Numbers to vertical direction? Tks.
Hi In Numbers, please tell me how to switch the text of a cell to vertical direction? Tks.
-
Oracle SOA 11g TP3 - Tutorial problem
Hello! I am quite new to this whole platform, and while I was following the First step of the tutorial, I ran into a problem, which I have no idea how to solve. (this tutorial: http://download.oracle.com/otndocs/products/soa/105-end2end-PO-Processing
-
Restricting Broswer Controlled Font Sizing
Hi Gang, I'm a bit new to Dreamweaver (have CS3) and have a question about font formatting and sizing. I have a tables / cell-based text column layout using CSS. It looks great when I have the type size set on "normal", but when the type is enlarged
-
Deleting main EAN (MEAN-HPEAN = 'X') in retail material master data
Hello experts, I have a customer (IS Retail) that realized, after data migration from legacy system, that many EAN including the main ones were obsolete or wrong. They asked me to clean all the EANs for a set of items, before deciding the new ones to