Why is my device not supported even though it meets the minimum requirements?

My phone is kind of old and Firefox doesn't show up in the Google Play Store, BUT...
I have sideloaded fennec on my phone and it works fine. I've been using it for two months now. I have had a look at the minimum requirements and even at the apk, but couldn't figure out, what is keeping me from installing ¨the official way¨.
So what's the reason, that I can't install firefox via the Play Store? This would make updating much easier.
Thanks in advance!
Device: HTC Desire (bravo)
Screen Size: 480x800
RAM: 576 MB
Internal Storage: ~150 MB
Android Version: 2.3.7 (Note: It's a custom rom.)
processor: ARMv7

We block the HTC Desire on the Play Store due to poor performance on the device. If you would like to use Firefox anyways you can install the Aurora update channel of Firefox from https://www.mozilla.org/en-US/firefox/channel/#aurora

Similar Messages

Can't Install imovie even though I meet the computer requirements

imovie '09 says I need at least a dual G5 with 2 Ghz in order to install. Well that's exactly what I have but it's not recognizing that. Any ideas?????

I figured it out. I had two graphics cards installed back when I had two monitors. But now that I only have one I had it plugged into the port with the graphics card that was not compatible with with imovie '09. So I moved the monitor to the other port and wallahhhh!!!

After upgrading to OS X yosemite my iMovie says not supported even though it has upgraded as well

I have a Mac Book Pro. I have upgraded to yosemite osx. Imovie has also been upgraded to 10.06 version but when I try to open it says that my 10.2 version is not supported even though my version has been updated. I'm also unable to have automatic updates.

I would try to delete it and then reinstall it.

Metadata under the Page Properties is not there - even though I have the latest March 15 Update

Anyone,
Metadata under the Page Properties is not there - even though I have the latest March 15 Update. ?? Help. Why is this?

It's only there for "normal" pages, not master pages.

The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation

Hi Guys,
Currently i am trying to install SCOM2012R2 with SQL 2012 SP1. When i proceed with SCOM installation, getting an error
"The installed version of SQL Server could not be verified or is not supported. Verify that the computer and the installed version of SQL Server meet the minimum requirements for installation, and that the firewall settings are correct. See the Supported
Configurations document for further information.
SQL Collation i selected as per System Center2012 guide SQL_Latin1_General_CP1_CI_AS
Can some one please help me on this?
Regards
Kris
Kris

Hi,
Please check logs for further information. Let us know what the logs says:
http://www.systemcentercentral.com/opsmgr-2012-my-installation-failed-what-log-files-do-i-read-and-where-can-i-find-them/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

This PC does not meet the minimum requirements for this version of iTunes

Trying to update my iTunes, the installer gives the error message:
"This PC does not meet the minimum requirements for this version of iTunes"
I have gone through the procedures listed in the support section, and have completely removed all Apple software, deleted the file folders etc etc.... still no joy.
This is most annoying as I've just received my brand new iPhone 6+ and I was trying to backup my old device to iTunes so I could restore it onto the new phone and get using it today. Hacked off big time :-\

Well I've eventually managed a work-around. Ver. 11.5.1 was no good because it wasn't compatible with my iphone 5, next one wasn't compatible with my iphone 6+, eventually got 11.4 installed so I could back up my old iphone 5 to it, then restore that backup onto my iphone 6+, which then wasn't up to date with the current iOS so I had to do that before it would sync my apps.
What a ball ache.
If someone would kindly let me know when the latest iTunes works again I's appreciate it, until then I'll have to stick with what I've got.
I need to start again with my music collection, re-import everything and get it on my iphone, because I had to delete it all a few months ago when iOS updated because it didn't have enough storage space on the device! Somehow lost it all off my iTunes in the process!
TBH I've always found the Apple system hideously complicated and infuriating when it doesn't work properly. Instead of making it more and more complex it needs simplifying and making fool-proof so people don't have to go through all this BS just to use their **** phone!

Best way to announce that the hardware does not meet the minimum requirements

     Hi Everybody!!!
     I'm in the process of tiding my App up, and I stumbled into a requirement that needs to be addressed. I'm not quite familiar with the latest trends, so I was wondering if anybody could recommend a way to inform the user if the hardware
to use does not meet the minumum requirements.
     In a nutshell:
* I just created a game using Direct3D / DirectX 11,
* I'm using "DrawIndexedInstanced", which means that the videocard to use should meet at least DirectX v10 (my shaders are using model 9_3 but I tested it in a computer with DirectX9 model 3 (or so the nvidia brochure said), and the game pretty
much died in my arms).
* According to the App Certification Requirements: "if you choose a minimum feature level higher than 9_1, your app must detect at launch whether or not the current hardware meets the minimum requirements. If not, the app must display a message to
the customer detailing the Direct3D requirements."
* I know how to detect the Direct3D level supported by the current videocard. What I would like to know is how to tell the user that the videocard does not support the minimum requirements.
     I don't have much knowledge about the current trends:
* I assume that displaying a message box may not be the best option, as that would mean I need to link the MFC layer to do so (the game is in Visual C++ and that's what I would do if it were one of my day-job projects). I'm quite sure that
is too much of a library just to show a message box... not to mention that most likelly the MFC is no longer supported in a Metro application...
* I was thinking about displaying a nice graphic warning about the issue, but if the D3DDevice1 is not what I expect then I don't think I can be sure that at least it can display the graphic with the information.
* I'm not quite sure if I should be linking to a .NET Library ("System.Windows.Forms" comes to mind), but then again maybe it's too much of a library for just a messagebox.
* Then again, displaying that message in a command prompt may not be the best idea either.
     Any help is greatly appreciated!!!
     Best Regards,
     Tarh Ik
Tarh ik

     Hi Chuck,
     I tried your idea, but the game always crashed when calling the DrawIndexedInstanced() function in a computer that only supported DirectX Level 9.1 (plenty of those computers at my day-job, sometimes I swear this office could be
a museum). The crash started as a driver unload call, and after that everything goes down.
     I also tried using the WARP mode, but the performance was horrible, and after a minute of playing I started to have temperature issues with the CPU (I did not see that one coming)
     What I finished doing was to create two sets of shaders (pixel and vertex):
* If the feature reported by D3D11CreateDevice was 9_3 or above, I'd use my very own and happy shaders, compiled in 9_3 model. Beautiful performance with DrawIndexedInstanced().
* If on the other hand the feature reported by D3D11CreateDevice was either 9_2 or 9_1, I'd use a set of shaders compiled for level 9_1. That seemed to be enough to draw a couple of images on the screen and tell the user, using my own game elements,
that the computer did not match the hardware requirements.
      It looks like this was a good approach. My game passed the certification test, and it is currently on the AppStore.
      Best Regards,
      Tarh Ik
PS: This posting has been posted "AS IS"
Tarh ik

RCU-6002:The specified database does not meet the minimum requirement to

I did all that is neccessary to let RCU to run but met the issues below. Really,this is not so good for me.pls has anyone a solution to this?
RCU-6002:The specified database does not meet the minimum requirement to load metadata repository.
RCU-6080:Global prerequisite check failed - Check requirement for specified database
The database you are connecting is not a supported version. Enter Database with version equal to or higher than 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 in 11g. Refer to the certification matrix for supported DB versions
Mcdonald gabriel

Hi Dear,
You need install the database version 10.2.0.4.0 in 10g or version equal to higher than 11.1.0.7.0 with the database character set AL32UTF8.
Best of Luck

Just got this error message - The installed graphics card does not meet the minimum requirements for Aperture

Help. I have an iMAC - not even one year old - just got this message - The installed graphics card does not meet the minimum requirements for Aperture.
I have not made any changes to my machine. Help - I can't get to my images

Try restarting your system.
If that does not help, we will need to know your Aperture version and MacOS X version. And do you use an external monitor? Then disconnect it before rebooting.

Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

Help - just got message "The installed graphics card does not meet the minimum requirements for Aperture"

Please click Profile Update and follow the directions for updating your profile. Your computer may be too old to support Aperture however without knowing anything about your iMac it's impossible to say. Also there is an Aperture forum to use and you can look at Aperture's System Requirements below to see if you have the minimum.
System Requirements
Minimum
One of the following Intel-based Mac computers:
Mac Pro
MacBook Pro
MacBook
MacBook Air
iMac
Mac mini
Operating system:
Mac OS X v10.5.8 or v10.6.2 or later
Memory:
1GB of RAM
2GB of RAM required for Mac Pro
Other requirements:
DVD drive for installation
1GB of disk space for application and documentation
7GB of disk space for Sample Library

New iMac Intel - Hardware Does Not Meet the Minimum Requirements?

When attempting to load Apeture I get a window pop up during the loading phase that states
" Your computer hardware does not meet the minimum requirements for Apeture?"
Any idea what this may be from. I have the new 17inch iMac with Intel processor and it worked before?
Help woudl be greatly appreciated. This is my first Mac. I switched from a P.C. I have no idea how to even trouble shoot challenges as of yet.
Thanks

Hi, and welcome to the Mac.
Aperture doesn't yet run on Intel hardware. A new version should be available in March, according to a blurb in the lower right corner of this page:
http://www.apple.com/aperture/

HT4007 The installed graphics card does not meet the minimum requirements for Aperture.

The installed graphics card does not meet the minimum requirements for Aperture. I have not used Aperture in a while and just got this error message. I tried applying OS updates and reinstalling Aperture and still get the same message. Does anybody have a solution or work around.

Are you using a non-standard Graphics Cards? Then this may be the reason.
You may also get this error message, if you accidentally booted into "Safe Boot Mode". Then certain extensions of the Graphics card will be disabled and Aperture cannot be launched.
Reboot and make sure that you this time will boot into regular boot mode.
See: Mac OS X: What is Safe Boot, Safe Mode?
If you are indeed running the system in Safe Mode, the question is, what made this happen? Do you use a wireless mouse and keyboard? There is a strange bug that makes Mac OS X boot into Safe mode, if you turn the wireless devices on, while the system is booting. Make sure they are active, before you boot.
But if you did not boot into Safe Mode, you could try to boot into this mode to reset the graphics card and then boot again into regular mode.
Merry Christmas!
Léonie

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. Tis does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

I have installed FCPX on my iMac (mid 2007) with a video ATI Radeon HD 2600 Pro 256 MB. This does not meet the minimum requirements. It seems to be ok but what kind of problems can I expect ?

Luis Sequeira1 wrote:
I have run things that are unsupported too (like 10.3 Panther on a Wallstreet Powerbook, anyone remember those? )
Hey Luis. I not only remember…I still have mine (OS 9)! Works perfectly well…for some things; just need to be selective about what I ask it to do. (Also have its big brother Pismo running Tiger, which is still an extremely competent machine.) When I take them out of their cases, I'm still amazed at the G3's build quality.
Russ

Kernel do not meet the minimum requirements

Hello,
I am installing Oracle AS Infrastructure.
My overall system checkup was fine but of kernel has following message.
checking for hardnofiles = 65536 found hardnofiles = 1024 Failed
checking for softnofiles = 4096; softnofiles = 1024
Problem:
The security parameters in the kernel do not meet the minimum requirements.
Recommendation: Perform OS System specific instruction to update kernel parameter, namely BIT_SIZE and NON_EXEC_USER_STACK.
After that I have checked /etc/security/limits.conf file values were correct.
But my /proc/sys/net/ipv4/ip_local_port_range
values were 1024 65000 --
they are correct in sysctl.conf file
But any way I have fixed that.
Also /pro/sys/kernel/shmni was 1000, so I make it 4096
Actually in the start of setting up requirements,
I have tried to make changes of kernel through /proc/sys/.....
But after that I have created sysctl.conf file and put all recommended values and restart the system.
So I continue installation.
Is it ok?
Regards,
DN

its has been done.
see: Article-ID: Note 300819.1

Security parameters in the kernel do not meet the minimum requirements

Hello,
I am installing Oracle AS Infrastructure.
My overall system checkup was fine but of kernel has following message.
checking for hardnofiles = 65536 found hardnofiles = 1024 Failed
checking for softnofiles = 4096; softnofiles = 1024
Problem:
The security parameters in the kernel do not meet the minimum requirements.
Recommendation: Perform OS System specific instruction to update kernel parameter, namely BIT_SIZE and NON_EXEC_USER_STACK.
After that I have checked /etc/security/limits.conf file values were correct.
But my /proc/sys/net/ipv4/ip_local_port_range
values were 1024 65000 --
they are correct in sysctl.conf file
But any way I have fixed that.
Also /pro/sys/kernel/shmni was 1000, so I make it 4096
Actually in the start of setting up requirements,
I have tried to make changes of kernel through /proc/sys/.....
But after that I have created sysctl.conf file and put all recommended values and restart the system.
So I continue installation.
Is it ok?
Regards,
DN

I have changed to
/etc/security/limits.conf:
* hard nofile 65536 --- I removed this line also
* soft nproc 2047
* hard nproc 16384
* soft nofile 16384
* hard nofile 65536
after that I got the values as below
ulimit -Hn
1024ulimit -Sn
1024I run ulimit -u 1384 -n 65536
ulimit -Hn
65536ulimit -Sn
65536I put the values back and reboot system.
* hard nofile 65536
* soft nproc 2047
* hard nproc 16384
* soft nofile 2048
* hard nofile 65536
Right away from the terminal, its give me values again
ulimit -Hn
1024ulimit -Sn
1024But after some time remotely (SSH) I have checked
abc:~ # ulimit -Hn
65536
abc:~ # ulimit -Sn
2048
dhsappserver1:~ #
DN

Why is my device not supported even though it meets the minimum requirements?

Similar Messages

Maybe you are looking for