Why is  my DiskUtility no longer finding any permissions which need repair?

In the past 4-6 weeks Disk Utility, both on my iMac and my MacBook always gives me a clean bill of health when I use it to verify/repair permissions.
In the past, I alwyas have had something which had to be repaired.
Bothers me that Disk Utility finds nothing. I install,uninstall lots of software and would expect permissions need tweaks after installing Security patches and such
IS it possible that a recent OS patch (security or other) has affected Disk Utility?
It just does not seem right that suddenly no permission needs repair.
Any one else finding that they , too, now always have clean bill of health with permissions, using Disk Utility?

I think some of the gurus to whom you refer need an education.
We all recommend repairing the hard drive and permissions before installing new software not because it's a requirement but because it's a precaution against poorly maintained systems. Doing so will help prevent problems for users who simply don't know what they are doing or never maintain their computer properly. Even toasters need to be cleaned once in a while, if you get my meaning.
Recently Mac World ran a couple of pieces on the subject that you should find interesting reading:
Repairing permissions- What you need to know
Take Control of Permissions in OS X
Also, Permission Repair- The Full Story and Repair Permissions- A false panacea.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

  • Why does my Spotlight no longer find any results?

    Whatever I look for in Spotlight it does its thing the says "No results found".
    Why did Spotlight stop working and what do I do about it?
    David

    I tried Christopher's proposed solution below and it didn't help at all.
    ANY OTHER SUGGESTIONS?
    David
    Open Activity Monitor (in your Utilites folder within your Applications folder)
    Look for "SystemUIServer". Select it by clicking on it's name once (it will become highlighted) and then press "Quit Process" (the stop sign in the upper left). When the confirmation dialogue appears, select "Force Quit". Wait a few seconds and the menu bar will rebuild itself with a now-functioning Spotlight.
    hope this helps...
    12" powerbook G4 Mac OS X (10.4.9)

  • Why can my iPad no longer find my wireless printer?

    Why can my iPad no longer find my wireless printer? Anyone know? It is an HP Photosmart 5510 printer. I had no problem a couple of weeks ago when I first got the printer. Very annoying! Many thanks jonni

    Jonni-
    Did you make any changes to your system, like a new Wifi router?  Some are not compatible with AirPrint.
    One possibility is that you have a print job stuck in the print queue.  Double click your Home button, and a row of recent Apps will line up along the bottom of the screen.  Scroll across and look for the Print Center.  If it is there, you should be able to delete any stuck print job.
    Fred

  • Why has it been so long since any updates to OS 10.6? My last update was over two months ago.

    why has it been so long since any updates to OS 10.6? My last update was in June. - Steve

    Since my previous message, there has been a Java update for Snow Leopard (at the same time as one for Lion and Mountain Lion), and its main purpose was to fix security issues. That at least shows Apple has not completely stopped doing Snow Leopard updates.
    We still don't know what is happening with general security updates for Snow Leopard, and won't until Lion gets its next general security update, or if there is a minor version update for Lion which includes security fixes.
    The one obvious missing update so far is Safari: when Safari 6 was released for Lion, it included security fixes, but there has been no corresponding Safari update for Snow Leopard. That suggests either a delay in supplying a Snow Leopard update for Snow Leopard, or that Snow Leopard updates are starting to wind down.

  • Why will my iphone 4s not find any devices with blue tooth it just keeps on searching

    why will my iphone 4s not find any devices with blue tooth it just keeps on searching...??

    If you're trying to connect to another Apple device you can't, it's not supported.
    Here are the supported profiles http://support.apple.com/kb/ht3647

  • I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the typ

    I've recently upgraded to Lightroom5.7.1 and now when I try to import photos a window pops up saying 'the photos can't be imported 'cos the files can't be read'. I had no problems before upgrading. I have Windows8 & can't find any 'app' which sets the type of files I can import. Any help appreciated.

    Well, think about it. This is a Lightroom forum. We are here to answer questions about Lightroom and how to solve problems in Lightroom. Your permissions issue is an operating system issue, not a Lightroom issue. I didn't mean to be sarcastic. But there are plenty of Internet resources that will answer that question.
    I just went to Google and typed in "change disk permissions", and there are links for the Mac as well as for Windows listed. There's no sense in me rewriting instructions that are already available.

  • While using the computer the wi fi dropped out and it can longer find any networks. I have played around with the air port etc , still have no networks and can't connect to internet. Please help

    Hi I am having Wi fi connectivity issues , while using my computer the wi fi dropped out , I can no longer connect and no networks come up. I have tried looking into the air port, trying manually to connect to the desired network with no success , it says the Wi fi is turned on. I am at a loss to why it will no longer connect, please if you have any suggestions,as I tried to ring apple support but my warranty has expired this is my first major issue since I purchased it in 2009.
    Thanks

    My 4s i-phone which is 2 years old cannot find any wi-fi networks not even my home network... I had the same problem two months ago but i turned off the i-phone for 8 hours and then it was okay... Now it happened again.... I tried to restart the modem but whilst my laptop is connected regularly, my phone still cannot find any wi-fi networks... I restart the i-phone, i reset it, i chose reset network settings, reset all settings, i turned it off for a whole day in case it was overloaded, i turned on the airplane mode and turned it off again, i put it into the freezer for 10 minutes within a zipped bag but 3 days now and i still cannot be connected to my home wifi... I went to the technician today and he told me that it means that wi-fi is broken and that i need to change it with a charge of 70 euro but i have to give my phone for 10 working days so as to be fixed... I am so frustrated and i don't know if i want to give 70 euro for wifi since i don't know if it would make the same problems again... 

  • Why do permissions always need repair?

    Whenever I go to disk utility and ask it to verify my computer's permissions, it always identifies a series of files where permissions need repair.  Why is this?

    http://www.thexlab.com/faqs/durepairfns.html#Anchor-The-11481
    Repair Disk Permissions often produces messages while it is running. These messages are generally of an informational nature and can usually be ignored. Some of these messages may be repeated every time Repair Disk Permissions is run as the receipt for the object in question is forcing the setting of specific permissions, even if no correction is required. Again, these can also be ignored. Only messages indicating the failure of the Repair Disk Permissions process, or the inability to correct permissions on a specific file or folder, should be of concern.

  • Since upgrading to yosemite, I can no longer find any Windows Computers on my domain

    We upgraded two out of three iMacs to Yosemite a while back.  Since that time, the two that are on Yosemite cannot see any non-mac computers in the network browser.  We can manually connect by going to Go / Connect to Server in Finder, and it works using either the IP or the relative path (smb://cpu1234/share).  The Mavericks computer still sees the entire network with no problems. 
    Does anyone know how to fix this uber-frustrating issue?

    Hi olejim51,
    Thanks for visiting Apple Support Communities.
    It sounds like you're not able to connect to your ISPs mail server on your iMac or MacBook Air.
    There could be several causes of the error message you're seeing. I would start with the steps in the "Mail Connection Doctor shows one or more red dots in the account Status column" section of this article to troubleshoot the message:
    OS X Mail: Troubleshooting sending and receiving email messages
    This article contains a variety of steps that can help resolve an issue like the one you're seeing.
    All the best,
    Jeremy

  • Gnome-Do no longer finds any applications - at all

    The only applications are those that are ran via terminal, if I want to run firefox I have to type firefox and I can run it, but I can't type fir... nothing comes up at all.
    It finds absolutely nothing, no programs at all. I am using Gnome-Do 0.8.

    Hi Erine,
    Yes, I am running 10.5.4. I need to update my profile on these message boards. My stats below are the most current. Anyway, I am using port 25, and the SMTP address is smtp.me.com. I did not set this part up manually; when I added my MobileMe account, I chose the "Add Account" button from the Preferences->Accounts window, typed in my name, e-mail address, and password, and Mail did the rest for me. Is it possible that the Mail app used the wrong SMTP information? Perhaps someone here who is using MobileMe with Mail app can confirm that the server should be "smtp.me.com" on port 25 with SSL enabled.
    EDIT: As I am going into the Activity Window, the outgoing MobileMe just started working! E-mails are sending! Hooray!
    Now on to the bigger problem...why, when I click Get Mail, does nothing happen?! Why isn't Mail app checking for mail every five minutes, as I have set up? And why does Mail app freeze when I try to quit?! Again, thanks for the help!

  • HT1923 i had to reinstall iTunes to my laptop due to a virus and hardware issue with the harddrive. since reinstalling it i can no longer find any of my purchased songs or movies. how do i recover all of the content in my account?

    can anyone help me through this? i have had this happen a few times but my iTunes list usually comes back just fine and i have all of the content restored.

    I had the same problem today and was able to resolve it without having to do a restore or reset. The problem had something to do with my mail accounts. The upgrade reset my mail settings, switching both my gmail and my .mac mail to "archive all mail". I went into the General Settings, disabled that setting, and resynced the phone. The "other" storage allottment dropped back down to less than a gig.
    Before you restore or reset, I would try that first.

  • Why is it I can not find any information on the Linksys Wireless Guard WPA-RADIUS service??

    All I need is:
    1- more info
    2- ability to sign up (is there a form)
    3- is there a cost
    Is it a secret?

    Here!
    CLICK THIS!
    "You tried your best and you failed miserably! "

  • Cannot change iCloud ID in iOS8 - Can't Sign Out without turning off Find My iPad - which needs the password for the old iCloud ID

    I have read the older responses to questions re how to change the iCloud account from an old ID/email address (OLD ID) - to a new ID/email address (CURRENT ID).  They all say go to Settings>iCloud - and Delete the iCloud account.  In iOS 8 - there is no Delete - but there is a Sign Out.  BUT - when I choose the Sign Out it shows a pop-up with the OLD iCloud ID - saying I must first sign IN to iCloud and enter a Password Required to turn off the Find My iPad feature.
    I have tried using the password I remember as being correct for the OLD iCloud ID.  Doesn't work.
    I have tried using the password for the CURRENT ID - even though the pop-up has the OLD ID displayed.  Doesn't work.
    I'm out of ideas - except Reset??
    Should I Reset All Settings? 

    I finally found a work-around in another thread on this Using iPad community.  Basically, I had to first make sure that the Messages and Facetime were associated with the CURRENT/NEW ID.  (I could do this by simply erasing the OLD ID and typing in the new - in General>Messages and General>Facetime.  I then used by PC to change my Apple ID back to the OLD ID/EMAIL - but leave the new password alone. 
    I then went back to Settings>iCloud - clicked on Sign Out.  When it asked me to log on -- with the OLD ID/EMAIL -- to turn off the Find My Phone - I did so using the Password that was originally used with the CURRENT/NEW ID.  This worked.  So I finally was able to close out of the iCloud account that used the OLD ID/EMAIL.
    I then went back on my PC to change my Apple ID back to the CURRENT/NEW ID/EMAIL.
    I then went back to the iPad Settings>iCloud - and signed on using the CURRENT/NEW ID/EMAIL.
    So everything is OK now.
    WHEW!!!
    Not sure why this has to be so difficult.  But thanks everyone for your suggestions.

  • Itunes will no longer play any film?

    I have recently reinstalled and authorized Itunes on my computer but i can no longer play any films which i have previoulsy paid for and downloaded?
    any ideas?
    Thank you,
    james

    You get this message because  iTunes can’t find the file. This can happen for a number of reasons:
    The song file or a folder in its path was renamed
    The song file or the folder it is in has been moved
    The song file has been deleted
    The device containing the song files e.g. external drive is not accessible or the drive letter has changed.
    Do any of these aply to you?

  • After udating my IPhone 4 to iOS 7 I can no longer find photos in the IPhone file on my computer when connected

    After updating my IPhone 4 to iOS 7 I can no longer find any pictures in the DCIM file when I log in through my computer.

    there have a recently deleted album , you need deleted again in this album~

Maybe you are looking for

  • How to put a String(date) into Date (java.util.date)??

    hi there I got a GUI here and I need to read some JMaskedTextFields from it. I put them all into Strings. Now I need to pass them to the search-function, but one of the search arguments is not string. Its Date. I tried to initialize Date with Date(St

  • Problem with access to SipFactory from jsp-pages in JBoss environment

    Hello! I have an installation of the OCMS 10.1.3.3. deployed into a JBoss (jboss-4.0.5.GA) environment. Unfortunately I have a problem with accessing the SipFactory from a jps-page. Encouraged by the "messagesender" example I tried to get an instance

  • ACTIVATE SUBTITLES USING SCRIPT

    Creating subtitle script in Apple's DVD Studio Pro. To anyone who can help, this is what we are trying to accomplish in Apple's DVD Studio Pro. We want to create a script that will allow us to turn on / activate subtitles using some type of memory re

  • Non-Reviewer is able to "vote" for for the assigned reviewer

    Not sure why this is happening, but it seems users that are not assigned as a reviewer, to a review activity, are able to vote on behave of the user that is assigned to the review activity.  I have a Queue created, that is all review activities with

  • Jsp to get info out of servlet question

    Hey, I'm looking for a good site or tutorial with examples in how to get info out of a bean or servlet. for example I have a bean that querys a db for info. how do I print that info to a jsp page with out using the out.printWriter? I know I need to u