Why is my express showing invalid ip address

why is mt airport express telling me I have a invalid ip address after I have changed providers, how do I fix?

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Similar Messages

  • Why are sites not showing URLs in address bar or showing incorrect URLs?

    I have just noticed that when I will open a tab and view it the URL for that tab is incorrect. It shows the URL of another site instead of the URL for the site I am viewing.
    Example: http://i162.photobucket.com/albums/t254/MasakoTomoe/error-8.jpg
    As you can see on that screenshot I am viewing the failblog but the URl showing in the address bar is http://input.mozilla.com/sad when it should be that of the failblog. No matter how many times I refresh, close/reopen same site, close/reopen firefox, the problem persists.
    Now some sites aren't showing a URL at all: http://i162.photobucket.com/albums/t254/MasakoTomoe/error2.jpg
    As you can see in the second screenshot the URL is missing in the address bar.
    You see, when I wanted to share a link with someone today to an image of two cute piglets it kept showing me the URL to an online game instead in the address bar. This is obviously not something that is suppose to happen.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • HT5576 Why my payment account show invalid when I purchase

    Why my payment account  shoe invalid ,when I purchase the application

    Accepted form of payment
    http://support.apple.com/kb/HT5552

  • Why do I get an invalid email address when gifting an item or itunes gift card?

    I have read additional discussions and they have indicated not to use the contact but enter the actual email address itself. To no avail i continue to get the same error. Frustrated incorporated :-(

    bsat, thank you for helping out!
    I had tried using only one ncReset previously and was experiencing driver errors. I removed the second ncReset as you suggested and now it seems to work with only one. I cannot get it to fail like it was doing.
    However, at least one ncReset must be used or I get the following error:
    ERROR ncConfig CAN1: Driver error (qual=000b000)
    Press any key to continue
    I get this error even when the program terminates normally. For example:
    1) Build obj2obj with the ncReset command.
    2) Execute and allow to terminate normally.
    3) Edit obj2obj and remove ncReset command.
    4) Execute and the error message is displayed.
    Amazingly, I was also able to single step through most of the program this morning. I got the first three messages (of 10 total) before ge
    tting the error:
    Microsoft Visual C++
    First-chance exception in cctool.exe (NTDLL.DLL): 0xC0000008: Invalid Handle
    It seems to be more random than first appeared and perhaps more related to MSVC than to the NI-CAN card. Any insight?
    Also, having to include an ncReset is undesireable since I'd like to develop a CAN driver that could be called from multiple threads. I'd be very interested in your opinion on why I'm having trouble getting it to work without one.
    Thanks again for your help, it is greatly appreciated!

  • Phone is showing invalid sim sos only in top left corner, why??

    why is my phone showing invalid sim and sos only in top left corner, currently using pre paid! ?????

    never mind all fixed..just pulled sim out and backin!!

  • I never had an APPLE ID with this email address and I have no idea why this is this showing to me?

    Every time I restore my iPhone from iCloud Backup, this apple id SHOWS UP  and asking password. But I never had an APPLE ID with this email address and I have no idea why this is this showing to me? Could anyone help me to remove it from my Applr ID as it seems somehow its linked to my iCloud Backup. Thank you.
    <Email Edited By Host>

    Hi Ralph,
    I have received the iPhone 5s from my carrier EE UK. I never had a second hand device as all my previous iPhones received from my carrier. Every time I restore from iCloud backup, first I enter my Apple ID and Password, then it authenticates and goes through next process and updates iCloud settings, right after initial settings then it displayes enter your password where the Apple ID is the metntioned Apple ID and in the bottom it says "Skip this to go next process" or something. I have to press that everytime to skip it, then restore my backup from iCloud and then when I'm in iPhone home it asks me for the password of that mentoned email. So everytime I change the email address to my Apple ID then enter my password that activates my iCloud services and start downloading all the apps I installed.
    Its really weird to be honest and I don't know how to remove that email address from that process and seems its there.
    N.B. When I had iPhone 4s, Apple Store did replace my iPhone 4s with a new one due to the faulty WiFi.

  • When trying to set up sync, why does it always tell me invalid email address?

    I've downloaded Sync, I registered and signed up for Firefox add-ons.
    When I try to set up Firefox Sync.. I type in my username, password, then when it comes to email address, whatever letter I type first a red/white X box comes up saying invalid email address. Why?

    telliot, your reply is a bit cryptic, but I finally understood what you meant. What he/she meant, folks, is to keep on typing what you know to be your valid email address. When you enter ".com" (or whatever extension) the error signal will disappear

  • Why my map dosent show the addresses completly? it just shows the name of the city or in the best way the name of expressway (no matter how much i zoom in)and it wont work in reminder or any other place. this happend after i update my iphone 4 to ios 5.

    why my map dosent show the addresses completly? it just shows the name of city or in the best way the name of exxpressway and it wont work in reminder or any other place. this happend after i update my iphone 4 to ios 5.

    I am having a really wierd issue as well that is probally related. I dont see 95% of the album artwork associated with my music. Also, it seems as if this has gotten worse since I started using that match feature

  • Why dont i get notification of invalid email addresses returned to me?

    When sending as many as100 emails out, some will have an invalid address (bad spelling, .com instead of .net, etc.).
    I used to get a returned message containing "MAILER_DAEMON" showing the invalid email address. In one case I sent an email to myself and added two emails with invalid address. I only received my email. I do use message filters routing to many folders, and in checking all folders I didn't find any of the invalid emails or the MAILER-DEAMON message.

    Typically the error is generated by the recipients SMTP server or a SMTP server in between, but not Thunderbird.

  • My airport express is not connecting with my airport extreme base station. They are probably six years old. My IP address on my express shows 0.0.0.0

    My Airport extreme and my airport express are not connecting together. I get an error message saying that my airport express software is not compatible with my Airport extreme and I have use them together for the past five or six years. It says I may need to change my IP address on my computer or something like that but I don't know what to do. the IP address on my express shows 0.0.0.0. Should everything be on the same IP address? Any help would be greatly appreciated. Thank you

    Please refer to the information already posted above:
    If you see A1084 or A1088 there, your older Express is not supported by the newer version of AirPort Utility that you have.
    If you have another Mac running Leopard or Snow Leopard, or a PC, then you could use that computer to administer the older Express and it will work on the network along with the AirPort Extreme.
    If the Mac running Leopard or Snow Leopard or PC does not "see" the A1084 Express, you will need to "hard reset" the Express by holding in the reset button for 10 seconds and waiting a full minute for the Express to restart. Then, reconfigure the Express again.

  • When I'm in a single story building that has alot of electronics , tvs , iphones cell phones ect- when I use find my iphone why does it show 3 different addresses as well as streets that are blocks from where I really am?

    When going to the gym and launching find my iphone- why does it show 3 different addresses and streets blocks away and then if I move in the building to another area it shows exactly where the phone is?

    Because the earth is large and you phone is getting your location from a satellite miles in the sky and you are under a roof.

  • Why my phone Id show error in the I-message address?!

    My I-message can only show the email address. Yet my phone Id show as error. It show as grey(can't change or do anything on it).
    Anybody know how to solve it?!

    http://support.apple.com/kb/ts2755

  • PRKC-1023 : Invalid IP address format & PRCR-1001 Error in root.sh

    Hello All,
    At prompting to execute root.sh, I get the following errors. I am installating 11.2.0.1 Grid Software. I am not sure why it is taking the virtual IP name.
    The details give are on Specify Cluster configuration window is :-
    Scan name : rs1pre91cl
    Both nodes edited/added as below
    hostname Virtual IP name
    rs1pre91dvdbaa01.pre.ccosvc.com rs1pre91dvdbaa01vip.pre.ccosvc.com
    rs1pre91dvdbaa02.pre.ccosvc.com rs1pre91dvdbaa02vip.pre.ccosvc.com
    Identify network interfaces option used to show eth0 for public (172.) and eth1 for private (192)
    SSH connectivity already established, but tested using this screen.
    Error in root.sh
    PRKC-1023 : Invalid IP address format: rs1pre91dvdba01vip
    add nodeapps -n rs1pre91dvdba01 -A rs1pre91dvdba01vip/255.255.252.0/eth0 on node=rs1pre91dvdba01 ... failed
    PRCR-1001 : Resource ora.net1.network does not exist
    add scan=rs1pre91cl ... failed
    When running pre-checks installation -- it shows me successfull.
    ./runcluvfy.sh stage -pre crsinst -n rs1pre91dvdba01,rs1pre91dvdba02 -fixup -verbose > ~oracle/run_pre_install_cluvfy.out.1
    Has someone experienced this error and what are the steps to fixup
    Thanks

    We have also experienced similar issue with 11.2.0.2 on HPUX:
    srvctl add nodeapps -n host2 -A "host2-vip/255.255.252.0/lan0|lan3"
    PRKC-1023 : Invalid IP address format: host2-vip
    Replacing host2-vip with IP address works fine.
    More surprisingly, on one node, it accepts same command with vip format, whereas on others it is expecting IP address in command. ( although vip names are resolvable to its IP address from all nodes--checked using nslookup)

  • Why Outlook email messages show unreadable characters

    When you receive a new email in Outlook, you may see unreadable characters in the email message body. This issue could be caused by one of the following reasons on Outlook client side:
    The email you received is converted to plain text format or a different encoding by a virus scanner. 
    This always happens when you are using characters (Such as apostrophes, double quotes, dashes, and ellipsis) supported by the "Smart Quotes" feature. When the email you received is converted to plain text format or a different encoding by a virus
    scanner, the character is converted from the ASCII character to a Unicode character, which is not supported on the recipient’s side.
    To prevent this issue from happening, we can turn off the “Smart Quotes” Feature in Outlook:
    1. Open Outlook 2013.
    2. Click File > Options > Mail.
    3. Click Spelling and AutoCorrect button.
    4. In the Editor Options window, click AutoCorrect Options button to open the AutoCorrect dialog.
    5. Click AutoFormat tab, and then clear the check box before “Straight quotes” with “smart quotes” under Replace heading.
    6. Click OK.
    The issue may be related to font substitution when a change is made to the Web Options in Microsoft Word. 
    If a change is made to the Web Options in Microsoft Word, registry data under the following key may be configured incorrectly:
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Internet\Fonts
    This problem has been seen to occur when the Latin string value under the \Fonts key was empty (no value). 
    We can check the Web Options setting in Word via:
    1. Start Word.
    2. Go to File > Options > Advanced.
    3. Scroll down to the General section, click Web Options button.
    4. Switch to Font tab.
    To resolve the problem, we need to delete the \Fonts registry key. To do this, please follow:
    1. Exit Word.
    2. Press Windows key + R to open the Run command, type regedit and press Enter.
    3. Navigate to:
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Internet\Fonts
    4. Right-click the Font key and select Delete.
    5. Click Yes and exit Registry Editor.
    The sender used an e-mail program that did not mark messages with a language encoding (character set), or marked messages with an incorrect encoding setting.
    In this case, we will see unreadable characters when we open the received message in our Outlook. For example, European regional characters (like German) require UTF-8 encoding protocol. So if the encoding in your environment is set to ASCII, the regional
    characters will not be available. 
    To resolve this issue, we need to change the encoding in Outlook to which will display your message correctly.
    1. Double-click to open the message you received.
    2. Click Actions button in the Move group under Message tab.
    3. Click Other Actions > Encoding.
    4. Click More and select the correct encoding setting for the email.
    5. After you finish reading the message, close the message, and click Yes button to save changes to the message.
    When we send an email with Outlook, we can set Outlook to automatically select encoding for outgoing email messages to increase the possibility that the recipient receiving the message will see all the characters rendered properly, even if they run older
    e-mail programs. By default, Outlook 2013 will automatically select an optimal encoding for outgoing e-mail messages. We can change the settings here in Outlook 2013: File > Options > Advanced > International Options section.
    Something you may need to know when you set the encoding settings:
    * The Unicode (UTF-8) character enables the complete range of characters on all computers. It’s the official IANA code for the UTF-8 character encoding.
    * Western European (ISO) and Western European (Windows) character set can be read by almost all computers.
    * If you are using a language other than English, you must choose the correct character set for that language, or the characters you need will not be displayed correctly.
    If you have any comments on this article, please feel free to post here.
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    The "problem" is not really a problem. I send and receive emails fine. But the in the panel between the Inbox (message queue) and the reading pane this is displayed:
    From Mozilla Support Forum <[email protected]> (white star)
    Subject Toad-Hall posted an answer to your question "Why do received email messages show they are addressed to an address other than my own?"
    Reply to [email protected] (white star)
    To [email protected] yellow star)
    cfortso@gmail is the address of one of my contacts.
    This glitch is not really bothersome, I just can't imagine why it happens.

  • I can not delete my history and adding new bookmarks. Upgrading to later Firefox versions and/or re-installing didn't help. The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.

    I can not delete my history and adding new bookmarks.
    Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
    The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
    Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
    == This happened ==
    Every time Firefox opened
    == the Firefox is being used

    I think I have a solution.
    First, download the add-on SQManager. This should be included with FireFox, it is really good.
    Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
    Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
    This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
    I think that if I just delete all the websites in moz_hosts....
    Wa-la...History Gone!!!
    As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
    Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
    Please tell me if you see any flaw in this.
    ''I think it's the solution we've all been looking for!''

Maybe you are looking for