Why is my G5 is stopping on the grey+apple logo screen when starting up?
My G5 is stopping on the grey+apple logo screen when starting up and fans run faster than usual after a couple minutes. I have read many of the posts related here, but it seems none are exactly what I am experiencing. Here is what I have done:
+Disconnected all peripheral devices (except for keyboard and mouse).
+Unplugged power cord and plugged back in.
+Unplugged ethernet cable.
+Removed added memory.
+Reset the SMU button on the logic board.
+Reset the PRAM by pressing Command-Option-P-R keys. It makes its second start up chime but I still get the grey screen.
+After opening the disc door with a paper clip, started up while pressing "C" with Hardware Test CD which found no problems.
+However, also started up with Systemworks disc and ran Disc Doctor, but I get an "unexpected problem, Error found: disk error" while "Checking Directories: Catalog Structure". When trying to run Speed Disc, my hard drive doesn't even show up in the window to select it. Nor does it show up in Disk Viewer.
I have not tried to start up from the original Mac Startup or installation disc that came with the computer. I am not at my G5 right now (having to use the internet at work). If I start up with that disc, will I loose any work (if I haven't already) that I haven't backed up?
Also, the G5 manual suggests replacing the lithium battery inside the tower if I am having problems starting up. I have not read to do this anywhere else except in the manual. It mentions having problems with the date and time which I haven't so I doubt it's the battery.
Any suggestions?
Thanks,
Tony
G5 Power Mac Mac OS X (10.0.x)
First and foremost you should never use Norton Utilities Disk Doctor or Speed Disk. They will corrupt your hard drive. NUM is not compatible with modern Macs and is no longer supported by Symantec. I highly recommend you uninstall it. You will find instructions here.
You should do the following:
Boot from your Tiger DVD. After the installer loads select your language and click on the Continue button, then select Disk Utility from the Utilities menu . After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this does not fix the problem, then it's possible your system files have been damaged in which case you may need to reinstall OS X. You can do this by an Archive and Install which does not require erasing the hard drive. However, the hard drive must be verified as OK per the preceeding intructions.
Similar Messages
-
G5 dual 2.7GHz refuses to get past the grey apple logo screen no matter what I do!
Hoping that someone might be able to help, as I think I have tried pretty much everything and I’m running out of ideas now!
It’s a G5 dual 2.7GHz that refuses to get past the grey apple logo screen no matter what I do!
everything passes the extended apple hardware test (2.5)
3GB of RAM (2x1GB brand new from crucial)
won’t start from a original OS 10.58 disk
passes disk utility when connected to another mac via FW target mode
nothing other than keyboard/monitor attached
all of this done; http://support.apple.com/kb/TS2570
tried alternative HDD’s without any joy
won’t safe boot
stays at the grey apple logo screen and the fans then start revving up excessively
Any other suggestions or advice very gratefully received!BDAqua wrote:
Seems strange that it's trying to invoke "AppleIntelCPUPowerManagement" on a G5, but maybe it's all inclusive???
Though it exists on my Universal 10.5.8 Install, it does NOT appear to be a loaded extension....
/System/Library/Extensions/AppleIntelCPUPowerManagement.kext
BD, is that showing up in your PM's extensions folder? I wouldn't expect to see it loaded in a PM, but I wonder why the installer loads it unless the 10.5 installer loads a system that could boot an Intel, too, when it installs on a PM. (I read somewhere this weekend that an Intel will actually boot from an APM formatted disc as well as a GUID formatted disc) Curious.
I recall seeing yesterday or Saturday on one of the discussion threads someone having that extension show up in a verbose boot on a PM that was having problems booting into Leo. I think I advised trashing the kernel caches and touching Extensions in that one, but it is puzzling that it shows up here as well.
This is the other discussion: https://discussions.apple.com/message/15161427#15161427 -
The Macbook Pro will not start past the grey Apple logo screen? Any help will be most welcome?
The Macbook Pro 13, late 2009 will not start past the grey Apple Logo screen? Any help will be most welcome? Thanks
Have you tried booting with the install disc that came with your computer?
Find it and then run Disk Utility to verify your hard drive. If errors are found, try to repair the disk.
It sounds as if the hard drive might be failing.
Clinton -
My powerbook won't load past the grey apple logo screen
I had been away on business for a few weeks and yesterday I decided to run the latest updates for my powerbook. In the middle of it the computer froze for what I think is the first time since I bought it 2 years ago. I ended up having to shut the computer down with the power button. When I turned it on it wouldn't and still won't advance past the grey apple logo screen with the progress indicator. It just sits there for hours on end if I let it.
So far I've tried the following, all to no avail.
Booting in safe mode I get the same result.
Zapping the Ram
Resetting the PMU
Reinstalling OS X, during which the computer either randomly shuts down or goes to sleep and then shuts down and requires me to reset the PMU in order to start again.
Running the hardware diagnosis. I did this once and it froze during the logic board test, 1 minute 6 seconds in to it.
Anyone have any ideas that don't involve spending 900 dollars on a logic board? Thanks a lot for any help.joeuu, thanks for the reply. i checked the airport and the ram and both seem to be seated properly.
i ran the quick hardware diagnosis and it came back showing everything was fine.
when i ran the extended one i got more progress than i did the first time. it got to the RAM diagnosis (about 6:45 seconds in) and then froze - i let it sit like this for an hour and a half to make sure it was actually frozen.
i also tried to run the disc utility from the installation disc and it just sits there with the progress wheel spinning, but nothing else is going on. -
Please help me!! My Power Mac G5 is stuck at the grey apple logo screen and nothing is working!
My computer froze a few weeks ago and I got a grey screen that told me I needed to restart the computer. When I restarted, the computer froze on the grey screen with the apple logo. No pin wheel. Nothing. Eventually the fan begins running at warp speed. I've scoured this discussion board for a solution and I've read every possible thing I can find on the Internet regarding this issue. Nothing is helping. I've tried reseating memory, resetting PRAM, I replaced the PRAM battery, all the standard stuff on the message boards. I can't run a disk, i cant boot from a disk holding down c, but I can hold down the option key to open the hardware test, I've done the extended and short test and passed both.
When I hold the shift+command+v it tells me-
com.apple.driver.appleintelcpupowermanagement isn't a valid Mach-o (magic is cefaedfe)
Error mapping module file com.apple.driver.appleintelcpupowermanagement
Can't map com.apple.driver.appleintelcpupowermanagement in preparation for loading
Can't determine dependencies " "
Can't alloc class " " blah blah blah
I'm pretty sure this is some sort of kernel panic. This computer has been pretty much trouble free in the 8 years I've owned it. I had recently upgraded iLife to iLife 07 before the trouble happened.
I've also been able to get it to boot once or twice since then. I get a message that says" the computer was shut down blah blah do you want to send a report to apple?" I'm able to do some basic stuff like back up some pictures onto my external hard drive and then it will freeze again and the fan will come on. While I had access to the desktop I checked the disk repair permissions and they were all messed up. I tried repairing permissions but I don't think it worked. Also the time and date was messed up which made me think it was a battery thing. Lately I haven't been able to boot at all past the apple screen. I don't have much money but I have to get this fixed!
Some specs--
Power mac g5
CPU @1702037.8 ghz
Boot rom version 5.2.4f1
Memory 8 gb, 400mhz
Pmu/fcu versions:127/6.0.1 f0
Running OSX 10.5.6
Just to be clear this is the power pc from around early 2005, not the intel based g5, not the water cooled one, and not a Mac Pro!
Please help me!!HI, have you blown the dust out lately?
Does it boot better/further if allowed to cool?
If you're sure the RAM is good, try the Hair Dryer trick...
http://discussions.apple.com/message.jspa?messageID=13240047#13240047
https://discussions.apple.com/message/15223603#15223603
https://discussions.apple.com/message/15499912#15499912
https://discussions.apple.com/message/15613068#15613068
https://discussions.apple.com/thread/3270112
https://discussions.apple.com/message/16053892#16053892
No power light at all...
https://discussions.apple.com/thread/3692775?tstart=0
It can show on any G5, and even many other computers & electronic devices of the period.
http://www.macintouch.com/reliability/pmg5.html
http://lowendmac.com/ppc/power-macintosh-g5.html
And see this last one in particular...
https://discussions.apple.com/message/16781690#16781690
Heat gun better...
https://discussions.apple.com/thread/3916312?tstart=0
If we don't get more help or answers here, feel free to join my site & ask...
http://x704.net/bbs -
PowerMac G5 & Display starts but after the grey Apple logo screen dies
When I turn on my PowerMac G5 it turns on OK along with the LCD display. But once the Apple logo and the spinning gear shows up (by the way the gear gets all pixelated and turns blue) the LCD display suddenly goes black as if it goes to sleep. The PowerMac is still running though but it's not responsive. I even tried opening the DVD drive with the keyboard and nothing happens. I took someone's advice of rebooting in Safe Mode and everything works OK for now. When I try rebooting in normal mode the problem persists.
What could be the problem? Is this a hardware issue? I even tried with another display and same thing happens.
Sad thing is my 3 yr. Apple Care expired a few months ago, never ever used it.Second time I've heard of display problems and 10.5.5., but it might be coincidental. For the other poster starting up in safe mode also helped but didn't cure his problem. Maybe taking out and reinstalling the video card would bring your mac back to its senses again.
http://www.info.apple.com/usen/cip/pdf/g5/073-0808.pdf
I was looking for some display preference to be trashed but there were so darn many of them I couldn't figure out what the right one might be. In case I missed it, have you tried resetting your PRAM? -
Major Problem! Booting gets stuck on the grey Apple Logo Screen
HI All,
My iMac wont startup. It gets to the screen with the apple logo on it with the small dial spinning and thats it .... I left it for a bout 10 - 15 mins and thats as far as its got!
I'm running 10.5 with the 300 GB HD partitioned into 2 one for Mac and the other running windows through boot camp. I booted from 10.5 disk... went to Disk utility and repair It only shows the the one disk 300GB usually it wold show 3 the 300GB and the 2 partitions as a sub of this.
Another thing I'v noticed is that looking in the start up disk nothing appears in there apart from the CD.
SIf I just wanded to reinstall the OS doesn't even look as if thats a possibility.
OK... So I tried the same thing but booting from and older operating system disk 10.4. I disk repair the 2 partitions are there so I run the disk repair while repaiing it come up with 'Incorrect number of threads recorded'... continues throught the other things like checking multi linked files etc. gets to the end then repeats the reparing volume. It automatically did the for 3 times now and its finally finished says
Error: The underlying task reported failure on exit
1 HFS Volume Checked
1 volume could not be repaired because of an error
Repair attempted on 1 Volume
1 volume could no be repaired
.. looks obvious to me that there is a problem with the HD that it cant seem to fix.
Does anybody have any ideas what I may be able to do to try and fix this problem or does it sound like the HD is dead?
Thnaks
WayneIve just restarted held down option and managed to boot in windows so I know that this part of the disk partition is running good.
However I tried the Install & Archive option on the Mac partition from the 10.4 System CD and it will only get as far as Varifying destination disk the progress bar move only a couple of mm and thats it. -
My iPod Touch 3rd Gen is stuck on the Apple Logo screen when starting up.
I've spent hours on this and it's driving me crazy. I've repeatedly tried going into recovery mode, DFU mode, and restoring (even using custom firmware) but it just won't work. Is there anything at all I can do to fix this?
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order. -
Nothing works, i keep getting a white screen??? after the grey apple logo screen
Dear All,
I tried safe mode, single user mode and resetting NVRAM or PRAM, and fsck -fy and /sbin/mount -uw / and etc etc
I cannot get back to my normal finder screen and log on as me ?
can anybody please tell me what to do, It's super urgent and here in thailand it's difficult to get realy good experienced help/service
many thanks in advance
LucasBoot with the Snow Leopard install disc and reinstall the software.
-
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle
My 2011 IMac will not boot up past the White apple logo screen with the whirly circle. I have tried various commands but to no avail. does anybody have any advice?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My phone is frozen and I can not get it to "Wake up"
Stuck on the black apple logo screen. And my computer and itunes are not responding when I plug it in.
Any ideas?try doing a restart / reset first
http://support.apple.com/kb/ht1430
if this doesn't work
You can try the step here in this link.
http://support.apple.com/kb/ht1808
when you're stuck on the apple logo, the operating iOS doesn't load so itunes could not detect the device -
PBT wont start up passed the grey apple logo, I get a very weird
PBT 400mhz wont start up passed the grey apple logo, I get a very weird symbol after 5 minutes of the logo. I get the "NOT" symbol. A circle with the line through it, then it just locks up forever.
Booting from a Tiger DVD gets a boot but sees no Hard drive or rather it says "an install error occured". (i was hoping an Tiger upgrade would fix the problem..)
Brand new hard drive with 10.3.x was very recently installed w/no problems. Any ideas?Oh I picked the ATARI 2800 format! Ooops!
Of course I picked the Mac OS Extended...
Well, you might be surprised to know how many people don't. One has to ask.
There was NO SMART status as I believ its not on 2.5" drives (?).
Not true. Some have SMART built in; others don't. Lately they all do. Jaguar may not support SMART (I don't recall), but Panther and Tiger do if your drive is equipped with it.
Installer disks are fine I use them to install on used macs to sell all the time...
...which, to all appearances, makes you a flagrant, repeat violator of Apple's licensing agreement and of the laws against software piracy. Probably not a good idea to advertise this here in Apple's house.
As for your LB error message in AHT, I'd hazard a guess (because your hard drive no longer appears) that it might have something to do with the ATA controller on the LB. Perhaps the controller was gagging intermittently for a while before its final complete collapse, which may now have occurred. Replacing the board is the remedy. -
My iPhone is stuck on the black Apple logo screen.
Hi,
So I just bought my friends used iPhone 2G. So in the car, on the way home, I reset everything on the phone because his all his stuff was on it. So when I got home it said it was done, and it was stuck on the black screen with the white apple logo. I shut it off thinking it would come back on and go to the slide to unlock screen. Nope. It is still stuck on the black Apple logo screen. Keep in mind, this phone has never been attached to my computer. Please help me. I'm really excited that I bought this. Now I REALLY want to use this.
Thank you,
DJDo you plan on activating the iPhone with AT&T?
If so, are you currently an AT&T subscriber?
If you plan on activating the iPhone with AT&T, you need to get a new SIM card from an AT&T corporate store.
When connecting the iPhone to iTunes for the first time with the new SIM card inserted, you should be prompted with the AT&T activation process.
If you don't plan on activating the iPhone with AT&T, did your friend include the no longer activated SIM card inserted in the iPhone - the SIM card that was used with the iPhone when it was activated with AT&T? If so, you can restore the iPhone with iTunes on your computer as a new iPhone. Activation with AT&T will not be required, but the no longer activated SIM card (the SIM card that was used with the iPhone when it was activated with AT&T) must be inserted in the iPhone to complete the restore with iTunes process. -
Code shows on the left on computer screen when starting up then the computer restarts
I was using my macbook pro 13" and my safari unexpectedly closed from there my laptop went off and restarted, when it started up, the progress bar never finished loading before it went off again, this happened twice and after that when my laptop started it showed some kind of code on the left side of the startup page where the grey apple sign is and would afterwards go off and repeat the same thing. I tried booting it into safe mode but it only refused and would do the whole code and restarting thing. Before this my laptop had a problem in which it didn't start up and showed a dim light when charging, I fixed it by opening up the back to unplug and plug the battery connector it was working fine for two days and started acting like this just this evening. I haven't had this computer for up to a year and haven't had any problems with it, I haven't dropped it or spilled anything on it before, it just started acting up and I don't know why. If anyone has a solution to what I can do to fix my laptop please share. Thanks.
To save files you have to install the OS on another drive, like an external HD, and then try to copy or migrate files from the installed HD. Then yo can try to format the installed HD and reinstall the OS.
However, the install HD may not be able to be formatted and you may have to replace it.
Maybe you are looking for
-
How to improve the performance of adobe forms
Hi, Please give me some suggestions as to how to improve the performance of adobe form? Right now when I' am doing user events it is working fine for first 6 or 7 user events. From the next one it is hanging. I read about Wizard form design approach,
-
Dear experts! Now, I'm getting some Issue about Good Receipt in MM module. - The first, I created a material master with transaction code MM01. - Second, I want to Good Receipt without PO for the Material with quantity is 40 and price is 12.000 per o
-
Using Query to fetch data from xml file
Hi guys , Just want to know , how to fetch data from an XML file in adobe flex? i have a database generated xml file.
-
ISE profiler feed policies update changelog / release notes
I often notice that updated feed policies are skipped because the policy was canged by an admin (me). In the past the cisco provided policies weren't detailed enought to use them for secure authentication policies, so I modified/added a lot of them.
-
How do I unlock mac? Someone hacked my account and I wiped my device from iCloud, and now I ask for a four digit code ignition Mac. How do they proceed in that way to unlock my Mac?