Why is my gradient in illustrator just black in text?
Every time I use the gradient tool on text it only shows up black, what's the deal with that?
WatWood,
As I (mis)understand it:
1) Change the (original) fill to None (Toolbox);
2) In the Appearance palette flyout click Add New Fill;
3) Apply the gradient, either clicking the Gradient (Toolbox) or clicking a gradient swatch.
To get another gradient than the default white to black through the Toolbox i 3) you may start by clicking another object with a gradient you wish to copy, then that gradient will be in the Gradient to be applied.
Similar Messages
-
Why can't I print in just black ink?
I keep being told my colour ink has run out. It is VERY expensive. Why can't I choose to print just in black?
Please read this post then provide some details. What printer model?
HP and other printer manufacturers have different printer technologies for different needs. For inkjet printers:
Some have printheads built into the ink cartridges. These printers can typically print with one or more of the colors completely empty, or even with color or black (but not both) cartridges removed. The Deskjet 6980 series is an example, or for an all-in-one see the Officejet 8040.
Other printers have separate ink supplies and replaceable printheads. An example would be the Officejet 8600 series printer. The printhead in these printers can be replaced if they are damaged by running the printhead with colors out. Some of these printers will allow printing with a color out, other will not. If the printer is run without ink in one or more colors the printer may be damaged, but the user may be able to recover without having to send the printer for service.
Other printers have permanent printheads. To run these without some ink in all the colors would risk causing damage to the printhead due to clogs, air ingested in the printhead or burned out printhead firing resistors. The Officejet 6700 is an example of this type of printer. For printers with fixed printheads this could require service to get the printer to print properly again when the ink is finally replaced.
The document here describes how ink is used. While the document is written for HP Inkjet printers the same principles apply to inkjet printers from other manufacturers.
If you never print in color a laser printer would likely be a better choice. If you occasionally print color but mostly black an IPH printer like those in the first category above may be a good choice.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
Why does say"To play the selected item, you must install a later version of the Adobe Flash Player. To download the Adobe Flash Player, go to the Adobe website." when I have the latest Version of it and it's just Black screen with no audio and Video? (Powerpoint Presentation 2013)
You asked your question on the wrong forum. Try one for the Flash Player
-
Why don't Gradients from InDesign copy into Illustrator
Hello, I was wondering if anyone call me why I can't copy a rectangle with a gradient from Indesign into Illustrator. The rectangle copies over, but it becomes colorless....what happened to my gradient? I can copy and paste solid color rectangle from Indesign to Illustrator, but why not a gradient?
Thanks a lotThe implementations are different?!
Mylenium -
Issues exporting gradients from Illustrator CS5 files to EPS 8
Hello everyone, I'm having problems exporting illustrator files to EPS, mainly with gradients that aren't rendering properly. These fills are appearing as small sliced objects rather than complete shapes. Any advice?
Thanks!Illustrator 8 is over a decade old. I expect that Adobe has significantly changed the way gradients are saved in Illustrator files since version 8. So, in order to preserve the appearance of the gradient Illustrator just expands it, rather than continuing to support a legacy format that’s so old. This is unfortunate but understandable.
Perhaps there are other options. Why are you saving as an Illustrator 8 EPS file? Surely you are not sending the file to someone who has no more recent version than 8? If the file is not meant for use exclusively with Adobe Illustrator 8 then it will be converted to some other format when the person you are sending it to opens it. When that happens, expect the gradient to be converted anyway.
My point is I doubt this Illustrator 8 EPS file will need to be edited, so it doesn’t matter that the gradient is expanded. -
I'm having trouble trying to figure out how to use gradients in illustrator. It's so easy in photoshop and flash, but I cannot figure out how to make a gradient with a solid color. I only want to change the opacity of one of the colors. How is this done?
Chris,
There may be easier solutions in newer versions, but you can create a shape with a black/grey/white gradient to put on top, select both, and use Make Opacity Mask in the Transparency flyout. Depending on the settings, black or white yields full transparency, the other full opacity.
The gradient to use is created by clicking the Gradient box at the bottom of the Toolbox and setting the properties in the Gradient palette, possibly also applying the Gradient Tool. -
Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks
As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.
-
REALLY NEED HELP!! screen is just black and wont turn on
i have an 8GB, 2nd geration, black ipod nano and i was just listening to my ipod in activity class when my ipod froze. so i tried the manual restart. but it didn't turn back on. now the screen is just black, wont even restart no matter what. so i tried plugging it into my computer but the itunes doesn't recognize it. there's a screen that pops up thats tells me to look for the files or download or something like that but when i try to, it says files not found. right now im at a total loss. nothing i do turns it on. what do i do now? should i just toss it? i dont even know if i wan't to buy a new one cause im scared this might happen again. i really dont want to use another $250 for another one.
ABSOLUTELY NEED HELP!!. im a bboy so i need my music lol.Sounds like the fall broke something internal. Take it to Apple and have them check it out.
Allan -
i could not restore my iphone it doesnt do anythig its just black and with the apple in the middle
see link http:///support.apple.com/kb/TS3694 for your error code and then follow step to resolve.
-
Can I print in just black and white from my iPad to an hp5510 photosmart printer?
Can I print in just black and white from my iPad to an hp5510 photos mart printer?
It seems ePrint is no longer available and now forced to use HP Connect. I am not seeing the option to print in black and white. Printing email messages in color is a waste of ink. Any help would be appreciated.
ThanksI was using ePrint however that is auto-directing me to HPConnected and I no longer have the option to change the printing options to Black and White or Color. This is a recent change for me.
banhien wrote:
Hi,
Yes, you have to use HP Connected now. Do you use AirPrint or ePrint ? ePrint allows you to select Color or Grayscale under Color mode (note: Grayscale ALSO uses color inks).
Regards. -
I purchased a movie from iTunes and when i try to play it on my mac or iphone its just black and has no sound...
help please!Are you going to Movies - Purchased or Computers - Movies ?
If you go to iTunes Store on your computer - Quicklinks - Purchased. Is it showing up there?
Is this a purchase or a rental? -
Officejet Pro 8000 A809 - can I print just black and have empty color cartridge?
I saw in a previous post entitled "PSC 1410 - can I print just black and have empty color cartridge"
that the printer does color underprinting even when printing black and white, to prevent bleeding.
My question is, is this also true when selecting the grayscale printing option in the printer properties dialog box?
I installed the printer using an ethernet connection to a Dell Inspiron 8200 laptop computer running Windows XP ProfessionalYes you will still need the color cartridge. The printer uses what is called under printing, it still uses some of the color cartridge's ink in this process, even when printing in just black, the reason is to stop the black from "bleeding"
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star** -
The screen on my iPhone 4s is not working it's just black & won't reboot?
The screen on my iPhone 4s is not working it's just black & won't reboot?
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you probably have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
I was updating google translate on my phone then the screen just black out. I thought battery went flat but after I put on charge, it's still not working. Please help!
Hello 74birdy
The article below will assist with troubleshooting your iPhone not responding.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
why can I not open illustrator on my laptop it will not download from creative cloud
Vanessa,
You need to have Application manager installed.
Beyond that, I believe this is one for Customer Care (tick I Still Need Help and hope for an agent available for a chat),
http://helpx.adobe.com/contact.html?product=illustrator&topic=downloading-installing-and-s etting-up
or for this specialized forum,
http://forums.adobe.com/community/download_install_setup
Maybe you are looking for
-
No: of Approvers on PO and requisition
How can we find from backend no: of approvers that a PO or requisition have? Thanks SS
-
I want to be able to forward messages WITHOUT all of this information sitting at the top of each message. -------- Original Message -------- From: - Wed Jul 02 16:02:43 2014 X-Account-Key: account1 X-UIDL: GmailId146f53cb7b1eb504 X-Mozilla-Status: 00
-
Hi All, I am new to Oracle BPM technology, i am trying to work with Healthcare adapter in BPM project. But I couldn't able to find the healthcare adapter in component palette (composite.xml) of BPM project. Will it be possible to work with HL7 Adapte
-
Where is the Assets link for Dreamweaver?
The beginning users tutorial for Dreamweaver tells the user at 1:30 to download the Assets from a link at the top of the page, however there is no link. Please advise.
-
I am having problems with my email?
I cannot get all my emails