Why is my internal microphone not being detected on a website requiring audio input recording?

When accessing the website; 'WhatUsersDo', which is used for testing websites, you are required to provide an audio recording of your thoughts about the website which you are testing, However, I am unable to submit an application to become one of the testers, as it is saying that I need to enable a microphone before I can continue with my application (as you are required to take a practice test during the application).
I have looked through other forums, and my microphone is working fine. Any thoughts on what the problem may be?
Cheers

If the site uses Flash, you have to enable use of the microphone in the Flash Player preference pane.

Similar Messages

  • Why my ipod is not being detected in my ml350

    why my ipod is not being detected in my mercedes ml350

    Does mercedes say it is compatiblw with your model iPod and its iOS?

  • My built-in webcam is not being detected by CyberLink Youcam

    My built-in webcam is not being detected by CyberLink Youcam (webcam) Pavilion dv6-6c10us

    Hello,
    I see that you're having an issue with the webcam in the notebook. If you could, please check and see if the webcam is listed in the device manager. If you don't know how to check for that, you can follow step 1. 
    Now, if you can't seem to find it listed in the device manager it could be that the webcam may have become unplugged internally and requires service. It could be a faulty webcam module which is not been recognized. I suspect you might have to send the Notebook in for a warranty repair to get it fixed. Now, if that's the case after following the steps below you will need to call HP@8004746836 and see what options they have to replace or repair the notebook. 
    Also, you can follow these steps to try and resolve the issue. 
    Steps:
    Please follow this document which will guide you through a couple of steps on how to resolve this issue you're having. 
    The document should something like this:
    First, try this steps that's circled. 
    If the first steps doesn't seem to resolve the issue go ahead and follow the next step below. 
    The first section "Video does not appear in your webcam software (such as YouCam, Skype, Messenger, etc.)" will guide you through a couple of trouble shooting steps to get the webcam to work within these programs. 
    If the first step doesn't resolve the issue please go to step #2 "Reinstalling the original webcam program that came with your computer”. This section will guide you through recovering the webcam software and drivers. This is the most important steps in the document if nothing before this resolves the issue. 
    It should look something like this:
    Once you have finished both steps please let me know the outcome. If you have any more questions please ask. 
    THX

  • Internal Microphone not working for L505D-S5983 (PLEASE HELP!)

    Hi,
    I can't seem to get my internal microphone to work. I have enabled it under Sound->Manage Audio Devices
    ->Recording tab. However the green vertical bar does not detect any voice. After setting the Microphone boost to +40dB, it detected some noise (since it has some green light) but I realized it wasn't detecting my voice. Since this did not work, I re-set the Microphone boost to only +10dB.  I only have one internal microphone and no external microphone. 
    I have seen many postings on internal microphones not working on Toshiba laptops but couldn't find a solution to mine. Can someone please help? I think it's about time that Toshiba fix this issue after the countless complaints.
    FM.

    No mentions of reinstalling the sound driver. That sometimes turns on the microphone.
    Satellite L505D-S5983
       Realtek Audio Driver for Windows 7 (32/64)
    Satellite L505-S5988
       Realtek Audio Driver for Windows 7 (32/64)
    Satellite M500-ST6421
       Realtek Audio Driver for Windows Vista (32bit/64bit)
    -Jerry

  • Mac os partition not being detected

    I was using samsung hdd in my mac that was bootcamp partitioned. later I replaced the hard drive with the other HDD. Now i am using samsung hdd as external drive and wanna format it but the mac OS partition is not being detected how do I format the whole drive??? I can only see the windows partiton which is 150gb rest 350gb was Mac OS partition which i wanna format but not able to do....please help

    Ok, you took out drive #1 which had Lion, Lion Recovery Partition and Bootcamped Windows.
    You installed drive #2 internally and installed the Lion Recovery Partition and Lion (via what method?)
    You booted from drive #2 and hooked up your drive #1 using either a SATA to USB adapter or powered enclosure and only can see the bootcamped partition? not the previous Lion Recovery or Lion OS X partition.
    Some enclosures don't work with OS X
    However if you want to format the entire external drive, wiping off everything including OS X, Bootcamp and Windows, all your files and programs, you should be able to select the "size" "brand name" + "model number" + "media" of the actual hardware itself on the far left side in Disk Utility.
    (In my case I have two OS X partitions)
    If your just selecting the name of your OS X boot partition, like Macintosh HD, then your only formatting that partition not the entire drive.
    Click the Partition tab, select 1 partition, Option GUID, format OS X Extended Journaled and click apply, the entire drive will then be formatted for Mac use only.
    If you want PC/Mac use, then Option Master Boot Record, format exFAT for 4GB+ files, or FAT (MSDOS) for under 4GB sized files, but most compatibility with other devices and Windows XP machines.
    My thread here explains how it all works.
    https://discussions.apple.com/message/16276201#16276201

  • Why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    why is my billing information not being review correctly...like it sayes my apple id has not yet been used in the itune store and it tells me to review my account info but for some reason it doesnt work

    Hi there ethangabe,
    You may find the information in the article below helpful.
    Using an existing Apple ID with the iTunes Store, Mac App Store, and iBooks Store
    http://support.apple.com/kb/ht2589
    -Griff W. 

  • My Ipod Nano 5th generation is not being detected by Widows and Itunes. I have tried everything based on the trouble shooting tips outlined. Has anyone had this situation before? How was it resolved. My Ipod is just out of warrenty

    Have done all trouble shooting tech a through Apples and still have not resolved issues on Windows and itunes not detecting my Ipod  nano 5th generation device. Tried restoring the device manually using disk mode and still not being detected by the computer. Device is our of warenty as when service repair charges are $125.00 dolars more than I paid for this device. There must be some way to restore the entire device to factor settings without having to be connected to itunes and Windows. I wish I could connect but again device is not being read. I have another Ipod that is 8GB instaed of 16GB and it works fine. The sad thing about this situation is that my 9year old daughter worked hard doing delivering fliers for a long time to save her money to buy this 16 GB 5th generation Nano. Otherwise the Ipod works well but will not syncronize songs as it is not being detected. Maybe this is a result of corrupt files that got onto my daughters Ipod somehow and thus causing it not the be detwected through the USB connection thus as a result not be understoud as a working device through Windows and itunes. If anyone can help me out there including itune techs that would be well appreciated, but for now my daughter is not able to add new or delete any songs on her ipod as well pictures, and everything. Thanks

    Try changing the cord. I could NOT get my computer to recognize my iPod 5th Gen until I read somewhere that different apple devices use different cords. I was inadvertently using my iPad cord and that caused my computer to not recognize my ipod.

  • Ipod 4g 32G not turning on, not charging (on multiple cords, both comp and wall, 4 20min), not being detected by Itunes or Windows 7 64bit OS, will not reset, tried taking it out of "DFU", NO DMG, Itunes up2date, All I'm getting is a blank black scrn

    Ipod Touch 4th generation 32G not turning on, not charging.
    I have used multiple cords on both computer USB and wall USB converters. I let it sit there for over 20 min with each attempt.
    It is not being detected by Itunes or my Windows 7 64bit OS. I have tried all 4 of my USB ports (both USB 2.0 and 3.0), with 3 different chargers.
    Holding home and power button will not reset.
    Tried taking it out of "DFU" mode but Itunes won't detect it, I didn't think that would work anyway.
    NO DAMAGE, I have been very careful with it, aside from a few minor scratches. (that you can't even see unless the light reflects them)
    My Itunes is up to date, as is my OS.
    All I'm getting is a blank black screen. It has been working fine on this computer before. I have no idea what could have happened. I'm at my wits end here.

    See if you missed anything here:
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.

    My iphone 4 is not being detected by any of my computers and not charging when connected to any computer.  It will, however, charge to the car or wall.  The only change that I can think of is that I downloaded a podcast from itunes directly from my phone.  I've since deleted this podcast with no luck.  I've restarted both the phone and the computer, still no luck.  One computer is running Vista and the other Windows 7, both have the latest Itunes Update.  Anyone have a fix for this?

    You clearly did not notice that you have joined a USER TO USER COMMUNITY FORUM
    This is NOT Apple ,Apple do not read nor do they  therefore respond
    So if you would like to wind your neck in ........................
    try a reset of iPhone and then a restore,best, as new and if it then functions correctly try restoring with your backup

  • Hp v235r flash drive not being detected on my computer

    Hi,
    I am using hp v235r flash drive for more than 5 years. It's not being detected on my computer since two days. Can any one solve my problem, as there is lot of important data stored in it and hasn't been backed up recently.

    Hello budda48,
    Its possible the driver for the pen drive is corrupted in your computer, or the drive has met its end of life.
    First, confirm that the Pen Drive is seen by other computers. Plug it in to another computer that you havent tried yet.
    If it is not working on other computers, then the usb drive is corrupted and there wont be anything else we can do.
    If it is working in other computers, then try these steps to troubleshoot the Pen Drive.
    Confirm that the port on the computer is not bad. Choose a different port to insert the drive. Next…
    Part 1: Make sure that the drive has a drive letter assigned in Disk Management.
    Open Computer Management by right clicking on Computer and clicking Manage.
    Click on Disk Management. Give it a moment to open the view of the drives installed.
    Look for a drive that does not have an assigned drive letter and is not labeled as System Reserved.
    Note: System reserved drives are reserved by Windows and will not allow you to assign a letter.
    Right-click the unlabeled drive and click Change drive letter and paths…
    Click Add and then click OK to select the first available drive letter.
    If the Change drive letter and paths… option is not available, make sure that the drive is Online.
    If the drive is Offline, right-click the disk number and click Online.
    Part 2: If the drive does have a letter assigned and it still does not work, uninstall the driver.
    You can safely remove any usb drivers that are not in use (hidden drivers). Devices that get plugged in later will simply reinstall its needed driver again.
    Remove the pen drive from the computer if it’s attached.
    Right click Computer and click on Properties. In the System window on the left side, click on Advanced System Properties.
    Choose the Advanced tab and click on Environment Variables… button at the bottom.
    Under System Variables, click on the New… button
    Type this in the box that pops up. Variable Name: devmgr_show_nonpresent_devices and also give the Variable Value: 1
    Click OK on all the open windows to close them out.
    Go to Computer Management again and click on Device Manager. Go to View at the top of the window and click on Show Hidden Devices.
    Click on the drop down arrow for Universal Serial Bus Controllers to open the list. Look for any USB Mass Storage Device that is hidden (greyed out) and delete it. There may be several and it’s ok to delete all those hidden USB Mass Storage Devices.
    When you connect the pen drive to the computer again, give it a minute to reinstall the driver.

  • My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

    iPhone, iPad, or iPod touch not appearing in iTunes

  • HT203128 My iPad is not being detected by iTunes after I updated to the latest version of iTunes.  What should I do?

    After updating to the new version of iTunes, my iPad 2 is not being detected when I tried to sync.  Any solutions?

    A few things to try. Any one or a combo mayhelp
    Reset your iPad.
    Hold down the sleep and home keys for about 20 seconds. Then plug it back in and see if it is seen now.
    Try a different USB port
    Reboot your computer
    If you have a PC:
    If that doesn't fix it, go into the control panel, add/remove programs. Uninstall iTunes, apple Mobile device service, apple application support.
    Then redownload and reinstall iTunes. then try again.

  • My iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    my iPod touch 5th generation had white screened an it won't let me rest it by holding down the home button an the power button for ten seconds I've pulled it in to iTunes an its not being detected what can i do as its starting to over heat?

    If you can't get it to shut down or restart when holding down the Home and Sleep/Wake buttons and you can't get it recognized in iTunes to restore it, the iPod may have suffered a hardware failure and will need to go to Apple for service. Someone else here may have additional suggestions, though.
    There is no "fifth generation" iPod touch, by the way, just for the sake of clarity; not yet, anyway.
    Regards.

  • My iphone is not being detected by the itunes on my laptop with windows 8

    the iphone is not being detected by the itunes on my laptop with windows 8
    someone please help

    iPhone, iPad, or iPod touch not appearing in iTunes

  • IPhone 6 and iPod Touch 5 not being detected by iTunes 12

    iPod 5 and iPhone 6 is not being detected after I downloaded iTunes 12.1.2
    Tried changing the lightning conductor, that didn't help either.
    Re-installed iTunes but it was of no use. :/

    See iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
    tt2

Maybe you are looking for

  • Can I install Snow Leopard on a MacBook Pro 2.0GHz quad-core Intel i7?

    I need to reformat my MacBook Pro 2.0GHz quad-core Intel i7 with OS X Lion with Snow Leopard in order to install Final Cut Pro Studio 2. Does anyone know if this can be done? Thanks in advance!!!

  • BlackBerry Messenger version 7.0.1.23 Fault

    I have a BlackBerry 9360 (3G, Wi-Fi), 7.1 bundle 1717 (v7.1.0.569, Platform 9.6.0.86), BlackBerry Messenger version 7.0.1.23 The team originally had the version of BlackBerry OS 6 operating system, for months to upgrade to the latest available for th

  • Insignia Receiver Use of HDMI-Thru Feature

    I have an Insignia home theatre receiver model #ns-r5101ahd-a that I purchased two months ago. I have not been able to figure out how to activate the HDMI thru feature which I assume allows the televison to receive the HDMI signal without the receive

  • Consolekit 0.4.5-1 strange behavior (ck-launch-session fails)

    Hello, i have a new instalation of arch and I want to launch my X environment with slim. I use this line in my .xinitrc (now i'm launching this directly from my shell for debuging): ck-launch-session dbus-launch startxfce4 My user is inside storage g

  • Socket reader problem even if Native IO is enabled

    Hi, I am using weblogic 6.1 sp1 on a hp windows2000 quad box. weblogic server hosts all the ejbs. Resin is used as a servlet engine. Sometimes the message <Sep 10, 2001 8:35:01 PM CDT> <Warning> <JavaSocketMuxer> <There are: '3' active sockets, but t