Why is my iPad print is larger than PC print.

I print from my PC and 1 page is printed but when I print from my iPad 2 pages are printed for the same print job.  The iPad appears to enlarge the print job slightly, does anyone know why?  Or how to modify the print settings.  I also downloaded the Printer Pro app and tried to print through the app and had the same results.

Try giving it a reset. Hold down the sleep and home keys, past when you see the red slider, and until you see the silver apple. See if that helps.

Similar Messages

  • Why would an alias file be larger than the original file?

    I have a simple document that is 106kb. When I create an alias to the file, the alias is 133kb. Why would the alias file be larger than the orginal file when the alias file is simply a redirect to the original file?

    Francine has a good explanation here:
    https://discussions.apple.com/message/10337543#10337543
    Matt

  • Why won't ipad print to HP office jet 8600 all in one printer model n911a ?

    Why won't ipad print to HP Office Jet 8600 model n911a? My I Phone 4S will print to printer but Ipad won't.

    Hi,
    The HP Officejet 8600 is an AirPrint enabled printer, there is no such 8600A model as listed above.
    Try updating the printer firmware and check for any change:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02919168&cc=us&dlc=en&lc=en &product=4323659&tmp_track_link=ot_search
    If the same persists it might happen due to lack of Bonjour compatibility or wrong configuration of your router.
    Try bypassing the router using the HP Wireless Direct option:
    Click the Network / Wireless Icon on the printer front panel and then tap on Settings.
    Click on Wireless Direct and select On (No Security).
    From your iPad go to Settings > Wi-Fi and connect to the printer's network, it should include either 8600 or n911.
    Try printing and check for any change, if that works be sure to clarify your router brand and model to better understand if it support Bonjour and how that kind of support can be enable.
    Shlomi

  • Why is menu size so much larger than the files?

    I am somewhat perplexed - I'm making a single-layer dvd and have a simple single screen theme (no animation) - it has one drop zone. The movie has 28 chapters so there are five of them, but so far I've added only one montage of photos to each menu page - it's a "mobile" quality in media browser and ave only 10 - 20 MB, then one song. On average these movie clips are 1:00 to 2:00 min long and the music is cut to that length. So, all told, it's probably less than 110 MB in files - but when I look at the project properties, the menus are 3301 MB!!!
    The movie itself is only 1.1 GB so what is going on?
    It's preventing me from doing the project and I've got no idea why it's making the menu size so much larger than the file sizes?
    Can you please help me figure out what to do?
    Alexa

    The 2 min clips were natively 2 min - I had each one separate and actually converted to media browser in "mobile" size (b/c the drop zone was 4 x 6 in size in the theme). They were tiny - in most cases I was shortening the audio (e.g. the song was 4 minutes and I was setting the loop to only 1:30 b/c that's how long the video clip was on the menu).
    BUT, to resolve the question (I always like to post the answer) - I ended up duplicating the project to try to reimport the video. It was a fresh iDVD project and I happened to click on the project tree of screens - and, lo and behold, the ENTIRE menu was duplicated for some reason (and the movie, actually). I went back to the original and it was the same! I have no idea how that would happen do you? It only had one main menu screen - and then an entire duplicate menu - which I wouldn't even know how to access if I didn't see it in the project menu tree?
    The only think of is that at one point I added a title menu link to the scene selection - it gave me a warning that my menu was more than 12 minutes, did I want to fix or ignore and fix later - which confused me b/c it was under 12 min, then but I clicked ignore. Does that create an alternate title menu and send people back to something else?
    Anyway, I deleted the entire extra scene selection menus (5 of them) and it was back to under 4 GB.
    So, I was able to burn, but still wondering about creating the "title menu" link on scene selections? It drives me crazy that it doesn't automatically do that so I like to add "main menu" links.
    Thanks for your help!
    Alexa

  • Why are my trimmed QT movies larger than the original?

    I have a bunch of raw .dv files copied over from my camcorder that have never been edited or opened in any other program. When I open in QT X and trim the file, the trimmed MOV version is often larger than the raw DV. On one file, I even trimmed about half of it away and it still came out larger. I was under the assumption that DV is not compressed and neither is raw MOV,
    After trimming the file and saving it, I select "movie" as the format since at this point I want to leave the files in as raw as a format as possible before I bring into an editing program like iMovie.
    Any ideas?
    Thanks

    Since QuickTime X doesn't have any export "options" (other than dimensions) a "raw" DV Stream format should always be smaller in file size.
    DV Stream is about 13 GB's per hour of recording. A QuickTime X "conversion" would use H.264 video and AAC audio codecs and should be about ten times smaller in file size.
    Are you sure your files are DV Stream?
    In any event, QuickTime X may not be the best tool for the job.
    QuickTime Player Pro doesn't re-compress the source codec if you use a simple "save" or "save as".
    A regular "save" after doing any edits will replace your source file with the newer version. No way to restore any of the edited information so you should use save as (keeping the original).

  • Why does my ipad play louder music than my phone through my headphones?, I have the beats solo hd

    When I am listening to music from my iPad and I switch to my iPhone listening to the same songs with the same headphones it is noticeably quieter when coming from my iPhone, I have the iPad 3 and the iPhone 5. Please someone help

    I can't really say why it's doing that, other than to say perhaps you should have a hardware check at the Apple Store. However, you just might be able to do something by resetting your iPad to it's factory default setup. Be sure to do your backups.
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    You can also get a hold of Apple Support if you want ...
    Apple Support
    http://www.apple.com/support/
    Apple Retail Store - Genius Bar
    http://www.apple.com/retail/geniusbar/

  • HT204247 Why is my iPhone Backup WAY larger than estimated? Pics incl.

    Thank you for reading!
    I have an iPhone 5S 16 GB running ios 8.1.3. My iPhone is being backed up to iCloud. Currently the backup is estimated at nearly 600 MB. I am utilizing iCloud photostream. I do not have photos saved locally. The largest app under the estimate (when clicking "manage more storage" is only 12 mB.
    Why is the backup SO large?!

    You are welcome for reading. 600 MB backup is not large, by all means. I have no imessages, about 60 photos and my backup is over 1 Gig. You just don't realize what happens with files. If you were to create smallest file possible by using notepad on your computer and typing one letter, it would still have more then 20 kbytes. We are talking apps that require bigger files for even smallest stuff. So you can pursue that avenue - why or why or just be happy that yet you don't have to pay for storage over 5 gigs. Your poison.

  • Why is Keynote storing images 20x larger than the original file size upon import?

    In Keynote, I'll add a 150KB PNG image to a slide and the 500KB presentation goes to 3.7MB... a more than 3MB increase. I'm trying to troubleshoot large file sizes as a simple deck takes up 50-100MB on disk. Anyone know what is going on to make the file 20x larger once added to Keynote? And how I can keep the file size down? The 'Reduce File Size' option is worthless in this case... offering a less than 10% reduction on the earlier 20x amplification. Thanks

    Chris H 71 wrote:
    This was originally in Keynote 09.
    Yes converting an existing version 5 file in to Keynote 6 does many strange things. Any existing version 5 files I have, I continue to edit in 5. When starting a new presentation, I can use 6 without many problems at all.
    I provided the files to replicate the issue to Apple support and never heard back.
    Apple do not provide feedback to users on issues, they only request information from users.

  • Why are Garageband 10 audio files larger than the previous version?

    I was working with Garageband 10 creating note files for my iPad app.  When I exported them as aif format, the file size was 2.1 mb.  When working with Garageband 6, the aif file sizes were 1.1mb.  Since Apple limits the file sizes of apps that are submitted to the App store, I can't use Garageband 10 with its new instruments.  Is there any way to decrease the aif file size and still keep the same format?  Thanks for any help!

    Since QuickTime X doesn't have any export "options" (other than dimensions) a "raw" DV Stream format should always be smaller in file size.
    DV Stream is about 13 GB's per hour of recording. A QuickTime X "conversion" would use H.264 video and AAC audio codecs and should be about ten times smaller in file size.
    Are you sure your files are DV Stream?
    In any event, QuickTime X may not be the best tool for the job.
    QuickTime Player Pro doesn't re-compress the source codec if you use a simple "save" or "save as".
    A regular "save" after doing any edits will replace your source file with the newer version. No way to restore any of the edited information so you should use save as (keeping the original).

  • Why are the sizes of apps larger than iTunes reports?

    Hello there,
    I have several apps which are very large on my iPad 2, but which are much smaller when you view their pages in the iTunes App Store. Some examples:
    Puzzle Quest 2: 576MB on store, 1.22GB on the iPad (per the Device Apps list)
    Starfront: Collision HD: 605MB, 1.04GB
    War Grimoire HD: 346MB, 962.9MB (and I just installed this one!!)
    What's going on? How can I reclaim all this wasted space, please?
    Thanks,
    Doug

    Many apps, especially games, will be accumulating data as they are used: high scores, a record of your progress in the game and such, for example.

  • Why does my background pic look larger than it should and is not as clear as the original?

    When islet a pic as background it says I can adjust size, but cannot in fact the pic gets larger and not as clear, this started with IOS7

    This is due to the parallax effect in iOS 7. As you tilt the phone to the left or right, the background image moves with it, to give the home screen an illusion of depth.

  • With icloud, why would you need an iphone larger than 16Gb

    I am finally getting ready to get rid of my old broken down Droid. I am an apple user, but missed the iphone release with Verizon by about 1 month. Now that my contract is almost up, ready to switch over. My question is, if I have access to icloud on the phone, do I need any larger amount of memory that the 16Gb? Someone I work with was telling me that they sync photos and itunes with icloud and keep them off of their iphone to use up less memory? The only drawback I see there is you have to have wifi or data connection to access your stuff. Is there something else I'm missing? What's the benefit of going with the 32 vs 16 if I can store my data on icloud...besides what I mentioned.

    movies
    and the bigger adventure and fps and rpg games on ios take up a lot of space
    I filled my 16G iphone up with apps alone
    suppose if you record a lot with the camera it's the same deal

  • SQL not parsed correctly Why is meant by SQL Statements Larger than 32KB?

    I execute the following code
         begin
              dbms_output.put_line('b4 Constructing query 2');
              v_retail_rate_query_a:='select *
              from Rate R
              where rate_id=:v_RateID
              and service_id=:p_ServiceID
    AND SUBSTR(R.Area_Code, 1, LEAST(LENGTH(:v_Orig_Number), LENGTH(R.Area_Code))) = SUBSTR(:v_Orig_Number, 1, LEAST(LENGTH(:v_Orig_Number), LENGTH(R.Area_Code)))
    AND LENGTH(R.Area_Code) <= LENGTH(:v_Orig_Number)
              v_query_a_length:=length(v_retail_rate_query_a);
              dbms_output.put_line('v_retail_rate_query_a ' || v_retail_rate_query_a || ' |');
              dbms_output.put_line('v_query_a_length ' || v_query_a_length || ' |');
         exception
              when others then
              :v_ErrNumber:=-1800;
         end;
    But the statement is not parsed correctly why is this so? with reference to http://download-west.oracle.com/docs/cd/B10501_01/appdev.920/a96590/adg09dyn.htm#26624
    32k /8 would have give me at most 4000 characters. the query certainly does not have 4000 characters.
    Anybody could enlighten me with the reason why oracle could not parse my query? Is there a way to insert '\n' in Pl/SQL?
    thanks!

    You do in your select statement length(r.area_code) <= length(:v_orig_number), so least(length(:v_orig_number),length(area_code)) will always return
    length(r.area_code).
    substr(r.area_code,1,least(length(:v_orig_number),length(r.area_code))) will return area_code because substr(r.area_code,1,length(r.area_code)) will return r.area_code.
    SUBSTR(:v_Orig_Number, 1, LEAST(LENGTH(:v_Orig_Number), LENGTH(R.Area_Code))) will return
    SUBSTR(:v_Orig_Number, 1,length(r.area_code)).
    I believe you can use select statement
    select *
    from rate
    where rate_id = cp_rate_id
    and service_id = cp_service_id
    and cp_orig_number like area_code||'%';
    Use this PL/SQL code.
    set serveroutput on
    declare
    cursor c_rats( cp_rate_id     in rate.rate_id%type
                 , cp_service_id  in rate.service_id%type
                 , cp_orig_number in varchar2)
           is
           select *
           from   rate
           where  rate_id           = cp_rate_id
           and    service_id        = cp_service_id
           and    cp_orig_number like area_code||'%';
    begin
      for r_rats in c_rats(1,2,'ABCDEFG') loop
        dbms_output.put_line(r_rats.rate_id);
      end loop;   
    end;
    /Here I used rate_id = 1, service_id = 2 and orig_number = 'ABCDEF'.

  • Why will my IPad print from my gmail account but not from my Yahoo email?

    I just got a new printer &amp; it works for my gmail account but won't print from Yahoo. Also Yahoo is showing a lock on its tab at the top of page although I am able to look at my emails. Can anyone please advise me as to what to do? Thanks.

    A restore might help.
    Backup & Restore
    Restore iOS

  • Why/how is my iPhoto library larger than the hard drive it is stored on?

    I store my iPhoto library on a 2TB external hard drive. The library file itself claims to be 2.65TB and created 12 years before I purchased the computer (see pic). I have confirmed this on other computers.
    I know my library to actually be closer to 680GB as I've been using it for a long time. When I click 'get info' on the drive itself, it shows it is around 945GB full which makes sense as there are other files also stored there.
    Could someone please explain how a 2TB drive can hold a 2.65TB file? Then, could someone help me restore it back to its actual size? I would like to back up my library but can't easily move such a massive file. I am also worried about its stability as I presume something is corrupt in there. 
    Thanks in advance.
    p.s. When you look at the image below, you may notice other libraries (the one in question is highlighted). I have had MANY troubles with crashing libraries and gone through MANY rebuilds to get my library to where it is now; complete and working but oddly sized (and not appropriately backed up!). If I could easily and safely migrate all my photos, their originals, their edits, the places and faces etc to another program I would definitely consider it because iPhoto and Aperture are simply not behaving as I'd like them to.

    I am unsure if it has been formatted MacOS but it is a My Passport for Mac so I imagine it was initially set up correctly - especially as it has worked well until now.
    You can check that by selecting your external drive in the Finder and using the command "File Get Info ⌘I " on the drive. The General section of the info panel will show you the File System.
    I have never seen that symbol in in iPhoto. In Aperture it is marking photos that have been downloaded from Photo Stream or Flickr or Facebook.  Are you syncing your library with any of these services?

Maybe you are looking for

  • Creation of material as TRAD

    Hi guys, I am asked by QA to maintain Financial views (Accounting7Costing) for a material that is cost of freight that we want to invoice to the customer. They would like to register this material as TRAD, but my problem is that I then have to determ

  • Mac Pro as a VMware virtualization workstation

    Hello all, I've used my Mac Pro quite heavily for virtualization-related tasks, from running a couple of Windows (XP and 7) VMs for various apps I need to support on both platforms.  My virtualization needs are taking a steep increase.  While I'd lov

  • Customized Error Message for User

    What's your recommendation re displaying Customized User Error msg as opposed to the generic, techy #SQLERRM# ? How can one implement this ? How can one capture #SQLERRM# (or whatever), evaluate the ORA number and display a message grandmom can under

  • Need blnak line in query result

    In sqlplus query result, i need a blank line between each row. how can I get it? solution please.

  • Radio genres not showing up - no access to stations!

    Hi, If anyone can help me with this frustrating problem, I'd much appreciate it! I'm a new user of itunes (using windows xp professional), and would like to access streaming radio stations... however, when I click on the 'Radio' option in the source