Why is My iPad (serial no. MD*******187) doesn't match with the chip inside, its A5x instead of A6?

I just acquired this iPad with retina and I'm wondering about its specs so i search the internet using its serial no. MD*******187 model MD515ZP and i found out that its a fourth generation iPad with retina and has an A6 chip on it but when i downloaded an app namely battery doctor it has a feature on it (system) where you can see the hardware specification, from there i found out that the chip installed in my iPad is only A5x, I'm confuse please help. Thanks
<Edited By Host>

Clarissa111 wrote:
Oh okay  thanks a lot for the information anyway do you know how i can see what chip was installed in my iPad?
If you have a 4th gen iPad, it has an A6. No other chip is used on those models. If you absolutely must check it, try the app System Status. It has been updated to recognize the A6, but you will need to full (paid) version to see that data. The Lite (free) version does not have that screen.

Similar Messages

  • HT4623 why does my ipad kick me out of FB and sometimes to the 'settings' page or sometimes to the desk top, for what reason?     I have 50.8 GB of capacity available; it is version 5.1.1 and model MC497LL.   it is WIFI and internet via AT&T???  Can you h

    Can anyone help me?  Why does my ipad kick me out of FB?  Sometimes to the 'settings' page and sometimes to the desk top?  I would like to know why this happens and what I can check or change to make it stop.   I have 50.8 GB of capacity available; it is version IOS 5.1.1; model MC497LL.  It is WIFI and internet via AT&T?   Can anyone give me some clues on what to do; or change in settings???  Thank you very much! 

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?

    Why my ipad warranty doesn't match with date that i bought? I bought ipad 4 yesterday but as you guys know it was already discontinued.. Has my ipad been used?
    I bought in 14 january 2014 and the expiration said it will be in 5 september 2014
    Is it mean that my ipad had been activated in 5 sept las year?
    But the packaging is good and it looks like very new.
    Please help me....
    I bought in IT plaza in kuala lumpur, malaysia..
    Heeellllppp...

    The merchant told me it is new. And when they opened the box and turn the ipad on, the ipad asked me to activate first.
    Is the 'restore to factory setting' can make us must activate the ipad again??

  • Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

    why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
    i don't know why...

    Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If this doesn't work, then try the more involved stuff.

  • I recently purchased Music Match, but all my non itunes music is on my ipad.  When i turn on music match in the settings screen on my ipad i get a message that says all my music will be erased.  How do I get music match to match what is there?

    I have all my music on my ipad and icloud.  I don't have itunes installed on a PC or MAC.  I recently purchased Music Match, but all my non itunes music is on my ipad.  When i turn on music match in the settings screen on my ipad i get a message that says all my music will be erased.  How do I get music match to match what is there rather than erase it? 

    Killerfinch wrote:
    My new yahoo account nestles comfortably in iCloud on the mine iPad.
    No, your Yahoo account is not in iCloud (which only handles iCloud mail), it is in Yahoo, and the Yahoo mail account is on your iPad.
    But the MacBook Pro will have none of it! I write this question now as I fear that I will be totally demented very soon and unable to formulate my thoughts clearly!
    Get the correct settings for your account from Yahoo and set it up manually.
    By the way, I also find the "password" issue problematical. It seems Apple want my Apple password rather than my eMail password. All very confusing.
    That would depend on what you are trying to do.

  • Iphone 5 system serial no doesn't match with outer box? Case of misprint? i see only one latter is serial no doesn't match

    I recently bought iphone 5 32gb white. Was surprise to see the outer box serial no doesn't match with iphone 5 system.
    They have print XXXXXXTXXXX on box and on phone its XXXXXX7XXXXXX. Only one latter is mixprint though.
    I check coverage status at apple site. The box serieal no is not found in apple system while the iphone 5 inside serial no i can see warrenty.
    plz help is it normal to have serial no unmatched on phone and box or the phone is not genuine

    You are correct. The SIM Tray of iPhone 5 does not have the Serial #  printed on it. So your Serial # is the one in the Settings app About. This is your true Serial #. A 7 and a T from a box label are not distinct enough to matter. Apple will only honor the Settings About Serial # and the ones located inside the iPhone 5, which will be the same as the About Serial #.

  • My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"

    My iTunes library will not completely sync to neither my iPad nor my iPhone -- both are completely updated with the latest software. What do I have to do?? When I try to do the "autofill" option when connected to iTunes it says "no songs can be copied"...I literally bought some of these songs yesterday on my iPhone and now I can't sync them to my iPad. What is this issue? Usually I would just have to plug either device into iTunes and everything would sync, now nothing new syncs.

    On your iPad tap Settings > Store
    Switch Books off then back on then reset your iPad.
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey

    Iam from Yemen we have CDMA carrier called Yemen mobile I bought an iPad from the US CDMA works with Verizon when I got to Yemen doesn't work with the carrier Yemen mobile and  both carriers verizon and Yemen mobile work by the CDMA system don't know whey can anyone help me please..

    A Verizon-model iPad can only work on CDMA with Verizon. You cannot use it with any other carrier. Apple, to my knowledge, has not released the iPad in Yemen, so there is no iPad you can use with any carrier there that works only on CDMA. You would need to find a GSM carrier and then get an unlocked GSM iPad.
    Regards.

  • SCCM issue - "LANG_LIST has some locales which does not match with the locale of serial number"

    I have a problem with the error "LANG_LIST has some locales which does not match with the locale of serial number" recurring.
    I am trying to install Acrobat XI Std silently by SCCM.
    I've used the Adobe Customisation Wizard to create a mst which include the volume serial number we have with our licence purchases. Note that I am in Australia. I use the command line in SCCM for the install as "msiexec /i "AcroStan.msi" TRANSFORMS="D&B_AcroStd.mst" /qn" which fails silently. If I install on a local machine using an admin command prompt and changing to /qb at the end, I get the aforementioned error.
    I have a few things to try and resolve, having searched the adobe forums and other forums for the solution. The mst is only trying to install US English & I have even gone so far as to use the direct editor in the customisation wizard and change some values in the property table to resolve this. In the property table I can confirm that LANG_SEL_DEFAULT = ENU, REGIONAL_LIST = ENU, LANG_LIST = en_US, ProductLanguage = 1033
    Is there a way to check the language specified for ym serial number?
    Bryndon

    Update on a couple of details:
    @Sabian,
    Thanks for the location, I've downloaded and then when I tried an install of the newly extracted msi (admittedly on the same computer) I got exactly the same issue. Of note though is that running /qf automatically brought up the same serial number and the same incorrectly spelled company name. Installing on another computer (freshly imaged) doesn't have those inputs already present under /qf. Next when I try using the transfrom (a new one) with /qr it gives an error of the serial number, displaying the entire serial.
    @Sebastian
    I've had a look through yours and it seems our issues could have the same origin. Looks like I may have to call customer support regarding the serial number as Sabian suggested in your thread.
    The bit that gets me is when the same serial number is used in a manual install (or /qf) then it installs ok without any errors.

  • I just uploaded the latest IPad software to my IPad and am now having loads of trouble with the device recognizing "online buttons", that is, links, etc.

    I just uploaded the latest IPad software to my IPad and am now having loads of trouble with the device recognizing "online buttons", that is, links, etc.  what can I do?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    -  Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Setup.exe gives a "LANG_LIST has some locales which does not match with the locale of serial number"

    I ran the Adobe Customization Wizard XI to create a transform file and now when run setup.exe it always come with the error "LANG_LIST has some locales which does not match with the locale of serial number".
    It does the same thing when using msi with the command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    Here is my setup.ini file
    [Startup]
    RequireOS=Windows XP
    RequireMSI=3.1
    RequireIE=7.0.0000.0
    Require64BitVC10RT=1
    CmdLine=/spb /rs /sl"1036"
    [Product]
    msi=AcroPro.msi
    vcrtMsi=vc_red.msi
    vcrtDir=VC10RT_x64
    Languages=1033;1036
    2052=Chinese Simplified
    1028=Chinese Traditional
    1029=Czech
    1030=Danish
    1043=Dutch (Netherlands)
    1033=English (United States)
    1035=Finnish
    1036=French (France)
    1031=German (Germany)
    1038=Hungarian
    1040=Italian (Italy)
    1041=Japanese
    1042=Korean
    1044=Norwegian (Bokmal)
    1045=Polish
    1046=Portuguese (Brazil)
    1049=Russian
    1051=Slovak
    1060=Slovenian
    1034=Spanish (Traditional Sort)
    1053=Swedish
    1055=Turkish
    1058=Ukrainian
    1025=English with Arabic support
    1037=English with Hebrew support
    6156=French (Morocco)
    CmdLine=TRANSFORMS="AcroPro.mst"
    [Windows XP]
    PlatformID=2
    MajorVersion=5
    MinorVersion=1
    ServicePackMajor=3
    [MSI Updater]
    Path=WindowsInstaller-KB893803-v2-x86.exe
    I don't know what goes wrong as took my serial number on my profile from the adobe web site, same thing for the download of the software.
    Does it means that the serial number provided was invalid for deploying ?
    NB.: My goal is to deploy our Acrobat XI through SCCM in silent mode and I don't know if there is extra consideration for that.  For now it's only not working at the command line.
    Another important point is that the install works great without customization !  If I just run the setup.exe from freshly extracted files and I use my serial number, everything is working fine.
    So what goes wrong ?

    Thanks for the reply brogers_1 and Vinod Dbhal, you gave good hint.
    I retried installing the initial package in French on a Windows 7 English and the software installed properly in French. 
    As I used to work with virtuals for those tests, I rolled back my virtual and redo my test installation with chosing to install it in English on my Windows 7 English and again the installation finished properly but I was surprised when I realized that even if I chose English as language, the software was running in French !
    Of course I can change the language settings (in the edit-preferences-language) to follow the operating system witch is nice.
    That gave me the cue I needed to know.  I started from scratch my customization with choosing only the French language in the "Application Languages" and I left the MUI Languages blank and saved the .mst
    I ran again the same command : msiexec /i  AcroPro.msi TRANSFORMS=AcroPro.mst /qb!
    And everything works fine.
    NB.: As I used the .msi directly, of course I had to install the prerequirement Visual C++ 2010 first.  Otherwise the installation failed without any error message.
    Thanks again to you for your good hint,
    Bob

  • My iPad shut down on its own and when i switched it on, it asks to 'Activate iPad' and reads below 'This iPad was lost and erased. Sign in with the Apple ID that was used to erase this iPad". Please help!!!!

    my iPad shut down on its own and when i switched it on, it asks to 'Activate iPad' and reads below 'This iPad was lost and erased. Sign in with the Apple ID that was used to erase this iPad". Please help!!!!

    Is it possible that you or someone who knows your iCloud sign on went into the Find My iPhone app and erased your device via iCloud? Because that is what that message is saying.
    Have you tried to sign on with your Apple ID and password?
    Was it online prior to this incident happening?
    GB

  • TS1538 I have iPad 3. Today, I updated iOS software with the latest update. After that it does not start up. Again and again the apple logo is flashing and nothing is happening. My device is not also detected in iTune. I did every possible things to resta

    I have a iPad 3 (wifi+cellular). Today I updated with the latest software update. But after the installation of the update it doesn't start. Again and again the apple logo flashes and nothing happens. I tried to reset it by accessing it through iTune. But it is not recognized by iTune. Please help.

    Hello bhar.suman,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Have a nice day,
    Mario

  • My iPad is constantly displays 'find my iPad alert OK' after my daughter was playing with the find iPhone app.  How can I unlock the iPad?

    My iPad is constantly displays 'find my iPad alert OK' after my daughter was playing with the find iPhone app.  How can I unlock the iPad?

    My iPad is constantly displays 'find my iPad alert OK' after my daughter was playing with the find iPhone app.  How can I unlock the iPad?

  • My husband bought ipad 6mos ago in dubai for my daughter unluckily the ipad got snatched at redeem but almost damage with the dent and got no power, what should i do?please help

    my husband bought ipad 6mos ago in dubai for my daughter unluckily the ipad got snatched at redeem but almost damage with the dent and got no power, what should i do?please help. that i pad is very much important to us,only the box i have here, what should i do if they dont allow to fixed it?

    You can try taking the iPad to an authorized service center in the Philippines:
    https://locate.apple.com/ph/en/
    but since the iPad sold in the UAE is specific to that country (the government there requires that Facetime be blocked), a Philippine service center may not be able to service your iPad. You can ask though. If they cannot help, then you would probably need to send the iPad back to the UAE for service.
    Regards.

Maybe you are looking for