Why is my ipad show to need active while im using it

why is my ipad show to need active while im using it

See if this applies. https://discussions.apple.com/thread/4379073?tstart=0
 Cheers, Tom

Similar Messages

  • Why does my iPad show no sim when turning on cellular data?

    Why does my iPad show no sim when turning on cellular data?

    Check the right and left sides of your iPad for a small hole the size of a paper clip (remove your smart cover if you have one).  If you see this, then you have the wifi + cellular model.  If you do, use a paper clip to remove the sim tray (or the sim removal tool that came with your iPad if you have it) as shown in the image below. 
    If the tray has a sim card in it, push the sim tray back in to re-seat it in the side of the iPad, then turn it on to see if the error message re-appears.  If it re-appears, take it to a Verizon store and have them give you a new sim card.
    If you have a sim tray but it is empty, you'll need to go to a Verizon store to get a sim card for it.

  • Why does my iPad show all my Hotmail folders but each empty except for recently received messages?

    Why does my iPad show my Hotmail folders but each is empty except for mail received since I activated my new device?

    Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

  • Why does my ipad show the usb cord and itunes?

    why does my ipad show the usb cord and itunes?

    It needs to be Connected to iTunes on your Computer.

  • Why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.

    why does not ipad show on itunes? when i connected with my macbook using usb, just it is charging electricity.
    i don't know why...

    Sometimes it can be something very simple and easy to fix. Before you get into any involved troubleshooting, quit iTunes, restart your Mac, restart your iPad and then try to sync again.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    If this doesn't work, then try the more involved stuff.

  • Why does my Ipad keep going to sleep while playing HBOgo?

    Why does my Ipad keep going to sleep while playing HBOgo?  I have to tap the screen every 10 minutes to keep it awake. This doesn't happen with any other streaming app. 

    You are most welcome

  • IPad showing photos in about settings and using gb space despite being deleted

    iPad showing photos in about settings and using gb space despite being deleted

    And it is not Photo Stream photos that you are seeing reflected?
    Try resetting your device(nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, see if the issue is resolved.
    If it isn't try syncing with iTunes on the computer you sync with, and uncheck "Sync Photos". See if that clears it up. If it does, then re-sync the photos that you want.
    Cheers,
    GB

  • Why does my iPad say it needs 1.4GB more storage to back up when I have 7.9GB of space available of my 20GB storage icloud storage?

    MMy iPad says it needs 1.4GB more storage to do a back up but I have 7.9GB available of my 20GB storage icloud storage?

    If you want to avoid paying for additional iCloud storage you can backup to your computer. Start the latest version of iTunes on your computer, connect your iPad, select General from the row of tab that are presented, then select your backup option.

  • Why does transport bar show Midi Out activity from an AUDIO track?

    I am running Logic Pro 9 on Mac OS 10.7.5 and I've noticed lately that The Transport display is indicating Midi output signal when I have an AUDIO track engaged. This happens when I engage the Record-Enable button, while I'm actually recording, or when i merely press Play. The good thing is that it does not affect my ability to record and playback my vocals.
    I should add that this also happens when I have a Software Instrument track playing or recording (but not when only Record-engaged). I'm not sure if that's what's supposed to happen since we are dealing with midi data in this instance. I know there should be Midi-In activity, but not sure about the Midi-Out activity.
    My Audio Track is used for recording vocals from my mic input, which is a separate in put from when I'm recording the output of an external midi instrument. I have checked all of my connections, I have tested my Midi Interface and Midi controller keyboard through Audio/Midi Setup in the Utilities and everything checks out. I have not added, taken away, or replaced any software, nor hardware.
    This is very puzzling to me because as far as my limited knowledge takes me, I do not think I should have any midi activity while I'm recording from my microphone inputs onto an Audio track. Any insight would be helpful.

    There's been lots of talking in this forum about MidiO. Just do a quick search!

  • HT4108 Why does an iPad (1st gen) and the Photos app using VGA adapter

    Why does an iPad (1st gen) using iOS 5.1 and the Photos app not send a single photo to a projector while a slideshow is sent photo by photo?

    I am not 100% sure, but i believe the iPad only does mirroring when connecting with AppleTV. AV cables will output audio and video out the bottom of the iPad (30-pin connector) to a TV/monitor, but the iPad screen itself will only show video controls (play/pause, FF, RW, Done, Progression bar).  If your cables say otherwise I am interested to know what brand they are and where you got them. If you are not getting any video at all the cables are probably not Apple approved and dont have the special chip in the 30-pin connector that allows for video transition.

  • Why does my iPad 2 suddenly need to activate SIM, go blank ?

    Hi everyone,
    I have a REALLY annoying problem with my iPad 2:
    Twice in about a month now, I open my smartcover, and I get the picture that says I need to connect to iTunes to activate.
    When I do that, it says the SIM card has a PIN, so I need to remove that PIN code to activate the iPad, then reconnect.
    What I end up doing, is removing the SIM card to even be able to get past that. So I connect the iPad to iTunes. Everything's gone, and I have to resync from the latest backup.
    Both times it's happend, the iPad has just been lying around for some hours since I last used it. I open the cover, and bam.
    Basically this means I can't trust my Apple product, because I simply don't know if it at some point screws me over. E.g. on a vacation, and it suddenly does that after I import all my vacation pictures from my DSLR. Or blog posts and articles I write but can't sync when on vacation (due to the insane european data traffic prices). So I almost don't dare produce anything I need, on my iPad 2.
    Which is ironic, since I bought it for just that primarily: Writing, for meetings, for school work etc.
    Do any of you guys have this problem, or have had it, and know of a solution ? Otherwise I'll simply have not use a SIM card with it. Which would annoy the crap out of me, since I like having a 3G connection on it.
    Hoping someone can help me understand what's going on.
    Kind regards,
    Jacob

    Do a FACTORY RESTORE...not from your back...
    Make sure you DON'T allow iTunes to  back-up your Ipad before this as it will Replace your back up with the funcky New app arrangement and soo on..
    Now after the Factory restore, restart iTunes and do a restore from the Back-p. AGAIN don't let iTunes do a back-up prior to this...

  • Why does my iPad show music files after unsyncing all music?

    I've got major issues with trying to get my iPad to sync music, but noticed that after I've unsynced ALL music, my iPad still shows 11 music files. They're not showing in my music content as playable tracks. How do I get these files off my iPad?
    Background: I believe these files are an album I bought from iTunes on my iPad. But these files wouldn't copy across to my iTunes library on my PC, and I can't view my purchases in the Store without iTunes crashing. So the album seems to be trapped in the depths of my iPad somewhere.
    My problems with syncing music started after this, so I am hoping that getting rid of these files will resolve my other syncing issues. If not, I'll tackle those later. First step, how do I get rid of these music files?

    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • Why does my iPad show half of my available storage as "other"

    When I look at the storage on my IPad a good deal of it is devoted to music and some to apps and pics, but by far the largest single category is labelled "other" and as far as I know this represents nothing at all. How do I get rid of it and free up my storage which I paid for.

    How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
    http://tinyurl.com/85w6xwn
    With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
     Cheers, Tom

  • HT201412 Why is my IPad showing a silver apple and nothing else?

    My Ipad is showing a silver apple.  It will not return to the home screen.  It will not power off properly.  Nothing but the silver apple.

    First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    Did you try this?

  • Why is my Ipad asking to be activated when it has been activated for the past 2 years?

    I restarted my ipad and now it is asking to activate.  The ipad attempts but with no success since last night.  It keeps telling me that the serve is down-but since last night?  I connected to itunes but it does not recognize the device.  Please advise.

    Did you recently restore or update your iPad?
    Do you have the app Cydia on your iPad?

Maybe you are looking for

  • Problem in leadselection of a Basic TableUIElement

    HI Experts, i have created two views in first view  i have some table data . now i need to get the on lead selected row values in next view . For this one i mapped both views to same node and attributes through Component controller. With this one i a

  • Sound Blaster Audigy Advanced

    I purchased a Dell 705 with Vista and had the software installed and it worked nicely. I sent that laptop back because I did not like Vista and wanted XP Pro SP2 but now Dell is telling me they can not sell anymore because it is not supported. Is tha

  • It should be easier to change the default copyright company in Application Builder

    It should be easier to change the default copyright company in Application Builder.   I got the following from NI support to change the name of the company that is copyrighting the software. 1. To show the desired hidden folder, you must select Tools

  • Why does the video not work?????????????????????????????????!

    I have an ipod video. I dl'd some cartoons. I converted them to the correct format. They transfer onto my iPod, however the video does not play. The sound plays and a small box to the left shows a frame of the cartoon. Alot like music, it looks like

  • Add new Language

    Hi, I want to add a new language to SAP BO. And i want to perform the same operations that we can perform on other languges: change, ... I think that i have to create a new language.LRF file under \Gui\ and try to make the system Read from it. does a