Why is my ipad taking so long to charge now that I upgraded to ISO 7. Not happy

Why is my ipad taking so long to charge. I upgraded to iso7.01 and it takes forever and I am not happy

Have you reset you iPad,or tried deleting the apps that are crashing and then opening them again. Or closing them and reopening them. Also clear Safari and see it that helps. There have been a few other posts like yours , and I can't figure out why it happens to some ipads and not others. I have not even seen what happens with a "crash" occurs and I use mine all the time. Good luck.

Similar Messages

Why is my IPad taking 3 days to charge?

Why is my IPad taking 3 days to charge.

How are you charging it? If you are using the outlet adapter and the cable provided with the device, it should only take an hour or two to fully charge.
If, however, you are using a non-Mac PC (or a much older Mac) and attempting to charge using the USB port on your computer, then that might be a problem.
A standard USB port on a PC has a max power output of 2.5W (5V @ 500mA). A USB port on a late-model Mac has a max power output of 5.5W (5V @ 1100mA). In practice, some PCs don't always put out a full 2.5W (particularly if there are other devices on the bus draining power).
If you plug an iPad into a standard PC USB port, the iPad will trickle-charge while the iPad is turned off. It's slow, but it will eventually charge. If you plug it into a Mac, the iPad will negotiate a 5W connection (the Mac can only support high-power mode on a a certain number of ports concurrently), and the iPad will charge, but slower than using the wall charger.
If this is the issue, the solution is simply to use the wall charger and don't attempt to use your computer to charge the iPad.

Why is my iPad3 taking too long to charge? (I bought it in Korea and brought it to Philippines)

How long should an Ipad3 be charged?

The quickest way (and really the only way) to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Why are my apps taking a long time to update both on my phone and iPad?

Why are my apps taking a long time to update both on my phone and iPad?

Hi ariasm21,
Thanks for visiting Apple Support Communities.
If the App Store on your iPhone seems unresponsive or app updates are not completing, try the steps below.
First force close the apps using these steps:
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app's preview up to close it.
These steps come from this article:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Next, restart your device:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Try updating an app again. If the issues persist, you may want to troubleshoot your internet connection next:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
All the best,
Jeremy

Why this Query is taking much longer time than expected?

Hi,
I need experts support on the below mentioned issue:
Why this Query is taking much longer time than expected? Sometimes I am getting connection timeout error. Is there any better way to achieve result in shortest time. Below, please find the DDL & DML:
DDL
BHDCollections
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BHDCollections](
[BHDCollectionid] [bigint] IDENTITY(1,1) NOT NULL,
[GroupMemberid] [int] NOT NULL,
[BHDDate] [datetime] NOT NULL,
[BHDShift] [varchar](10) NULL,
[SlipValue] [decimal](18, 3) NOT NULL,
[ProcessedValue] [decimal](18, 3) NOT NULL,
[BHDRemarks] [varchar](500) NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_BHDCollections] PRIMARY KEY CLUSTERED
[BHDCollectionid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
BHDCollectionsDet
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE TABLE [dbo].[BHDCollectionsDet](
[CollectionDetailid] [bigint] IDENTITY(1,1) NOT NULL,
[BHDCollectionid] [bigint] NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](18, 3) NOT NULL,
[Quantity] [int] NOT NULL,
CONSTRAINT [PK_BHDCollectionsDet] PRIMARY KEY CLUSTERED
[CollectionDetailid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
Banks
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Banks](
[Bankid] [int] IDENTITY(1,1) NOT NULL,
[Bankname] [varchar](50) NOT NULL,
[Bankabbr] [varchar](50) NULL,
[BankContact] [varchar](50) NULL,
[BankTel] [varchar](25) NULL,
[BankFax] [varchar](25) NULL,
[BankEmail] [varchar](50) NULL,
[BankActive] [bit] NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_Banks] PRIMARY KEY CLUSTERED
[Bankid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
Groupmembers
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[GroupMembers](
[GroupMemberid] [int] IDENTITY(1,1) NOT NULL,
[Groupid] [int] NOT NULL,
[BAID] [int] NOT NULL,
[Createdby] [varchar](50) NULL,
[Createdon] [datetime] NULL,
CONSTRAINT [PK_GroupMembers] PRIMARY KEY CLUSTERED
[GroupMemberid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_BankAccounts] FOREIGN KEY([BAID])
REFERENCES [dbo].[BankAccounts] ([BAID])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_BankAccounts]
GO
ALTER TABLE [dbo].[GroupMembers] WITH CHECK ADD CONSTRAINT [FK_GroupMembers_Groups] FOREIGN KEY([Groupid])
REFERENCES [dbo].[Groups] ([Groupid])
GO
ALTER TABLE [dbo].[GroupMembers] CHECK CONSTRAINT [FK_GroupMembers_Groups]
BankAccounts
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[BankAccounts](
[BAID] [int] IDENTITY(1,1) NOT NULL,
[CustomerID] [int] NOT NULL,
[Locationid] [varchar](25) NOT NULL,
[Bankid] [int] NOT NULL,
[BankAccountNo] [varchar](50) NOT NULL,
CONSTRAINT [PK_BankAccounts] PRIMARY KEY CLUSTERED
[BAID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Banks] FOREIGN KEY([Bankid])
REFERENCES [dbo].[Banks] ([Bankid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Banks]
GO
ALTER TABLE [dbo].[BankAccounts] WITH CHECK ADD CONSTRAINT [FK_BankAccounts_Locations1] FOREIGN KEY([Locationid])
REFERENCES [dbo].[Locations] ([Locationid])
GO
ALTER TABLE [dbo].[BankAccounts] CHECK CONSTRAINT [FK_BankAccounts_Locations1]
Currency
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Currency](
[Currencyid] [int] IDENTITY(1,1) NOT NULL,
[CurrencyISOCode] [varchar](20) NOT NULL,
[CurrencyCountry] [varchar](50) NULL,
[Currency] [varchar](50) NULL,
CONSTRAINT [PK_Currency] PRIMARY KEY CLUSTERED
[Currencyid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
CurrencyDetails
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[CurrencyDetails](
[CurDenid] [int] IDENTITY(1,1) NOT NULL,
[Currencyid] [int] NOT NULL,
[Denomination] [decimal](15, 3) NOT NULL,
[DenominationType] [varchar](25) NOT NULL,
CONSTRAINT [PK_CurrencyDetails] PRIMARY KEY CLUSTERED
[CurDenid] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
QUERY
WITH TEMP_TABLE AS
SELECT     0 AS COINS, BHDCollectionsDet.Quantity AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'Currency') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)
UNION ALL
SELECT     BHDCollectionsDet.Quantity AS COINS, 0 AS BN, BHDCollections.BHDDate AS CollectionDate, BHDCollectionsDet.Currencyid,
                      (BHDCollections.BHDCollectionid) AS DSLIPS, Banks.Bankname
FROM         BHDCollections INNER JOIN
                      BHDCollectionsDet ON BHDCollections.BHDCollectionid = BHDCollectionsDet.BHDCollectionid INNER JOIN
                      GroupMembers ON BHDCollections.GroupMemberid = GroupMembers.GroupMemberid INNER JOIN
                      BankAccounts ON GroupMembers.BAID = BankAccounts.BAID INNER JOIN
                      Currency ON BHDCollectionsDet.Currencyid = Currency.Currencyid INNER JOIN
                      CurrencyDetails ON Currency.Currencyid = CurrencyDetails.Currencyid INNER JOIN
                      Banks ON BankAccounts.Bankid = Banks.Bankid
GROUP BY BHDCollectionsDet.Quantity, BHDCollections.BHDDate, BankAccounts.Bankid, BHDCollectionsDet.Currencyid, CurrencyDetails.DenominationType,
                      CurrencyDetails.Denomination, BHDCollectionsDet.Denomination, Banks.Bankname,BHDCollections.BHDCollectionid
HAVING      (BHDCollections.BHDDate BETWEEN @FromDate AND @ToDate) AND (BankAccounts.Bankid = @Bankid) AND (CurrencyDetails.DenominationType = 'COIN') AND
                      (CurrencyDetails.Denomination = BHDCollectionsDet.Denomination)),
TEMP_TABLE2 AS
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM TEMP_TABLE Group By CollectionDate,DSLIPS,Bankname
SELECT CollectionDate,Bankname,count(DSLIPS) AS DSLIPS,sum(BN) AS BN,sum(COINS) AS coins FROM TEMP_TABLE2 Group By CollectionDate,Bankname
HAVING COUNT(DSLIPS)<>0;

Without seeing an execution plan of the query it is hard to suggest something useful. Try insert the result of UNION ALL to the temporary table and then perform an aggregation on that table, not a CTE.
Just
SELECT CollectionDate,Bankname,DSLIPS AS DSLIPS,SUM(BN) AS BN,SUM(COINS)AS COINS FROM
#tmp Group By CollectionDate,DSLIPS,Bankname
HAVING COUNT(DSLIPS)<>0;
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Why is N-Gage taking so long??

Why is N-gage taking so long to finish games like asphalt etc?? Happy with first access on n81 but the games I like are not available yet

CT - do you have any of that Pixie Dust left over from last time?

Why is my mac taking so long to load videos

why is my mac taking so long to load videos

This may have something to do with your Internet connection, the size of the video you are watching or the amount of items running in your Mac at the same time.

My ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

my ipad will no longer connect to the laptop. it comes up with usb not recognized. also when trying to connect to the power the first time i connect, nothing, but when i unplug from ipad and plug in a second time it charges

yeah tried all that. the only thing that i havent tried is to delete itunes completely and restart. its the same with the ipad. i havent done a master reset. i just think it has to be something rather simple as it acknowledges that i have plugged in the ipad as it makes the noise it just come up usb not recognized. it shows up as an unknown device that doestn have any drivers
its driving me round the bend at the minute

HT1368 why is the "buy all" no longer visible on my wish list? and it is not letting me delete items.?

why is the "buy all" no longer visible on my wish list? and it is not letting me delete items.?

The 'buy all' has, for some reason, been removed from the current version of iTunes - you can try leaving feedback for Apple and maybe it'll be added back in a future update :http://www.apple.com/feedback/itunesapp.html . Until then you can only buy items individually.
In terms of the 'x' for deleting items from it, other people have posted about that and it's affecting me as well. I assume that there is a bug with the current version of iTunes and/or a problem at Apple's end which they need to fix.

Why do my ipad mini never get fully charged? the most is only up to 92percent

why do my ipad mini never get fully charged? the most is only up to 92percent

This seems to be a problem with a few Mini users. Just unplug the charger and then replug. It should then charge to 100%.
 Cheers, Tom

TS4213 Why can't iPhoto, Pages, Numbers, Keynote and iMovie access my iTunes Library files and Pages, Numbers, Keynote and iMovie access my iPhoto Library files now that I upgraded to '11?

Why can't iPhoto, Pages, Numbers, Keynote and iMovie access my iTunes Library files and Pages, Numbers, Keynote and iMovie access my iPhoto Library files now that I upgraded to '11?
Examples of what is going on:
1. In Pages, Numbers & Keynote, when I go to the media browser the Audio section reads "Open iTunes to populate this list" even after iTunes has been opened, .xml file has been replaced/repaired, etc AND Photo section reads "Open iPhoto to see photos from your iPhoto Library in this list" even after iPhoto Library has been replaced and new default library created.
2. In iMovie, similar thing ... when I go to add photos or music to a movie the iTunes files aren't present and the iPhoto photos are missing with similar messages as in #1.
3. In iPhoto, similar thing ... when I go to add music to a slideshow it says to "Open iTunes to populate this list".
It is shocking to me that Apple would let something as simple as a pathway link to associated library files get this messed up on an upgrade, but what's even more surprising is that with the number of people who seem to be having this particular issue (and I can tell from all the research that I've done for weeks online that there are a lot of them) that there doesn't seem to be a single clear answer to fixing it anywhere on these community support forums. Most of what I've seen is rehashed advice from outdated issues. What I need is a simple answer to how do we get these programs to look for the correct location of the photo and music files because I sure can't seem to find any logical place to do that through the programs' preferences files or the system preferences window?
Any help would be greatly appreciated.
P.S. Here's the details on the software/hardware:
MacBook Pro
Mac OS X
Version 10.7.5
2.4 GHz Intel Core 2 Duo
8 GB 1067 MHz DDR3
iTunes 11.0.4 (4)
iPhoto '11 9.4.3 (720.91)
iMovie '11 9.0.9 (1795)
Keynote '09 5.3 (1170)
Pages '09 4.3 (1048)
Numbers '09 2.3 (554)

I have the same problem on a new MacBook Pro. I have not been able to access the iTunes library from iPhoto since I got this computer. I looked in the Preferences file and deleted the com.apple.iApps.plist but there was no com.apple.iApps.lockfile so I just deleted the iAPPs.plist and rebooted the computer. Still no iTunes available in iPhoto.
All my music is in iTunes and plays. After reading the above I brought up Pages and I was able to access music and insert a track into a document.
Do you have any suggestions.

Updating my iPad to iOS 6.1.2 now that iOS 6.1.3 update is out

How can I update my iPad to iOS 6.1.2 now that iOS 6.1.3 update is out

You can't. THe time to update to 6.1.2 was before 6.1.3 came out. All you can access is the latest update.

Why is my battery not holding a charged now that I have ios7 on my iPhone 4

Why is my battery not holding a charged now that I have ios7 on my iPhone 4

The same is happening to me on my 4 and 4S... Before the software update my battery used to hold up to 1 day for both 4 and 4S. Now I have to charge twice a day the iPhone 4 and three times a day the 4S. Apple should really fix it... I hope they release a new update for iPhone 4 and 4S users...

I stopped using the IPad application but still get charged for that, how can I stop it?

I stopped using the IPad application but still get charged for that, how can I stop it?

Which iPad app ? If you mean one that has an auto-renewing subscription within it then there are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098

Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have alr

Could you help me with an app situation? We purchased several codes for Splashtop to install on our iPad 2's. It was working great but now that we upgraded the OS they have disappeared. The codes that we purchased are giving us an error that they have already been used. So far it has only been 2 iPads.
Any solutions?

The compiler is highlighting the areas you got wrong, although the error messages are somewhat confusing.
Error 1: NSLog is a function and needs to be called as such, see e.g. the circleArea call on the line above. Functions are called using the function-name with its arguments in paratheses e.g. foo(12, 13).
Error 2: looks like a typo, defining a function is done as function-name(... <arguments> ...) { ... <body> ...}. In your code there is a ";" between the arguments and the body that should not be there, you probably copy pasted it from the forward declaration at the top of the source codde file.

Why is my ipad taking so long to charge now that I upgraded to ISO 7. Not happy

Similar Messages

Maybe you are looking for