Why is my iphone 4 going to a blank screen?

I've tried resetting it by pressing the home button and off button with no success. I've tried restoring it with no sucess. Should I erase all data and start again? I don't know what else to try.
Thanks

They better huh?
I'm sure Apple is shaking in their boots.
No such problem with my iPhone which I connect with a number of wi-fi networks.
If the same problem with any other wi-fi network besides your own and no change after resetting network settings and/or after restoring the iPhone as a new iPhone or not from the backup, the iPhone has a hardware problem.
If the problem is with your wi-fi network only - no problem with any other wi-fi network besides your own, the problem is not with the iPhone.

Similar Messages

  • I upgraded to iOS 6 and when it went to restart, it goes to a blank screen almost like it has water damagebut it hasnt been near water. Do I just restore it?

    I need help because I went to get iOS 6. Then when it got done and went to reboot my iPod, it goes to the Apple logo and then it goes to a blank screen. What do I do??

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Can't open a file,just goes to a blank screen then back to desk top, how do I fix this?

    Can't open a file,just goes to a blank screen then back to desk top, how do I fix this?

    What system?
    What version of PageMaker?
    Can you open the PageMaker app ok?
    If so, what happens if you then use File > Open? (Not double click)

  • IPhone 4 - App store show blank screen

    The iPhone 4 App store show blank screen ...... try all the online tips, still the same blank screen.

    app store has crashed http://www.news.com.au/technology/apples-app-stores-crash-failing-to-allow-conne ctions-app-listings-or-update-programs-purchased/story-e6frfro0-1226497212894

  • I accidently downloaded a virus on my iphone which means i cannot open my safari because it just crashes and goes to a blank screen. please help

    i accidently downloaded something as i opened a site. it now means i cannot use safari because everytime i try to open it, it just goes to a blank black page and wont let me do anything. what can i do? please help! my iphone is either a 3G or 3GS?

    You cannot get a virus on an iPhone unless it is jailbroken. The site you displayed may be corrupt, however. Press the HOME button if not on the HOME screen, then press it again. Hold your finger on the Safari app that appears in the recently used ribbon, then tap the "-" to close it. Next go to Settings/Safari and tap Clear History, then Clear Cookies and Data.

  • My iphone 4s goes to a black screen when in use of any apps. after the update to ios6 any ideas for a fix?

    Since i updated to ios 6 my iphone goes to a black screen when it is in use. I could be texting and 5-10 sec later it goes to a black screen and than to the home page. Its also will be when playing games and so on. Can you please help me with this? I have tried resetting my phone, press the home button 2 time and canceling any running apps and even press home and powering button and still does the same thing. I need help!!!! Any suggestions?????

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...

  • HT201412 Why does my iPhone show me a solid red screen

    Why does my iPhone show me a red screen

    What do you mean a solid red screen?
    that maybe a hardware or software issue,
    http://support.apple.com/kb/ts2802 - for hardware trouble shooting
    try to do a restart and a reset first.
    http://support.apple.com/kb/ht1430
    http://support.apple.com/kb/ht1414 - for restoring (to isolate it from being a hardware one.)

  • Report Viewer goes to a Blank Screen

    Post Author: DHitten
    CA Forum: JAVA
    I'm attempting to implement the Crystal Reports XI JRC and can get it to succesfully render the report and all the associated tool bars, as well as preform the functions that the tools do.    The Issue I'm having is that when ever I click the export button, or the print button and do the associated steps to do those things and I go back to do something else with the generated report, the report will always go to a blank screen instead of doing the selected action. I create the CrystalReportViewer object  inside a servlet and when I do the above it dose go back to the servlet. My qustion is dose any one know why the viewer will only let you do one tool action (Print or Export) and not do the other after? Is there a way to get around it or am I missing something in my code Much AppreciationDustin Hittenmiller

    I've also run into this issue.  I got my phone in Feb 2015.  Also iphone 6 (64GB).  It's happened during calls and when I tried taking a photo.  The screen basically goes black but the phone is still on and responds to buttons.  It's happened to me twice in the past month or so.  Each time, I've just had to wait for a few mins and the screen becomes lit up again.

  • My updates are showing i have 2 apps to update but wont connect to show what apps need updating just goes to a blank screen can anyone help

    My updates show i have 2 apps to update but when entering the app store and clicking on update it goes to a blank white screen and wont load.
    I have reset my wifi so its not that i have also tried it on a different wifi can anyone help please 

    iOS 4.2.1 is the final version of iOS that an iPhone 3G will run, so you will not be able to use any apps that require iOS 4.3 or later. There is no way to get any later version of iOS onto your iPhone without serious hacking, something we cannot discuss here.
    You do not get the option to update iOS directly from an iPhone until you have iOS 5 or later.
    Regards.

  • Hi, my iPad 2 keeps dropping out and going back to blank screen, I then have to enter my password again, start downloading or reading and it happens again. I have reset the iPad but it is still the same.

    Hi, my iPad 2 keeps dropping out and going back to a blank screen. I have to again enter my password and go back to what I was doing and then it happens again, I have tried resetting and nothing has changed.
    Thanks
    Ron

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without be charged again.  Also, if you have IOS-7, read this.

  • HT201263 my iphone 4  is totally dead, blank screen no matter what i do nothing happens, there is plenty of power in the battery.

    my iphone totally dead, blank screen no matter what i do nothing happens, ther is plenty of power in the battery

    see here
    http://support.apple.com/kb/TS3281

  • Can not access app store on iphone 5, comes up with blank screen?

    click on app store on iphone 5 and it comes up with blank screen , after awhile the section heading at the bottom of the screen such as top charts, updates, search , etc, but the main screen body is still blank.  Seems to be trying to connect but can't.  Any ideas?   Much appreciate it.
    Thanks!
    CC

    Do you have a case on the phone? If so, what case? If you do, then try removing the case and see if it works.
    If not, then try a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone should reboot. After that, try again.

  • Why does my Iphone 4 keep going to a blank screen?

    My Iphone 4 keeps going blank.  I have to reset it.  The last time it wouldn't come back.  Had to go to ATT store.  They plugged it in to wall and it came back on.  It's doing it more and more.
    What is wrong?

    Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414
    Note:
    Also consider Deleting any Apps you have Purchased / Downloaded but you now never use..

  • Why is my iphone now going really slowly?

    Whenever I try to play my apps, such as swords and sandals and angry birds, my iphone goes increadibly slowly while these apps are being used. Is there a fix for these?

    Yeah, I know some changes have been made to Siri but this is SO annoying.  Driving down the road, dictating notes and texts and messages and it is rejected and I can slammed by my own phone to boot.  This is not what I had in mind when I paid for an iPhone.

  • Why does my iPhone 5c go to black apple screen when I unlock it?

    When using my messaging, if my phone locks when I unlock it, it goes directly to the black apple screen that usually appears when turning my phone on. Then it will eventually go back to my messages. Does anyone know why it's doing this and how to fix it?

    Hi MrsBarnett10,
    If you are having an issue with your iPhone not unlocking normally while using Messages,   you may want to try some things to troubleshoot.
    First, quit all running applications and test again -
    iOS: Force an app to close
    Next, I would try restarting the iPhone -
    Turn your iOS device off and on (restart) and reset
    If the issue is still present, you may want to restore the iPhone as a new device -
    iOS: How to back up your data and set up your device as a new device
    Thanks for using Apple Support Communities.
    Best,
    Brett L  

Maybe you are looking for

  • Apple Logo flashes every 5 seconds continuously

    I removed my iPOD from the computer without first "ejecting" it and when I tried to turn it on the next morning, the screen showed the Do Not Disconnect symbol and Disc Mode. I was able to put it back on the computer and then ejected it properly and

  • Very elementary....what is the check box for in itunes?

    Would someone please enlighten me on the functionality of the check boxes next to items in itunes? I check several songs I want to delete and then click Edit>Delete but only the ONE ITEM selected by the cursor is deleted. OK, so I know how to do shif

  • Why does it shut down a few seconds after turning on

    I just did the most recent update for my Macbook Pro ( I am posting this message with my older macbook pro), and after the update finished, now when I turn on the unit, the pinwheel spins for about 20 seconds, then the unit shuts off.  I am unable to

  • Selection tool functions

    unable to regain pointer tool attributes it only moves object cannot resize or rotate from mouse

  • Call transformation: tt:cond using="exist..." doesn't work a second time?

    Hello, unfortunately I did not find a solution in the internet. So I'll try to get an answer here. I  created a simple transformation and want it to work with two similar internal tables. These tables contain one different column with different names