Why is my iPhone no longer able to communicate with adobe bridge cs3?

We have 2 iphone 4's that I have been able to download photos from and into my imac for the last year while using the adobe bridge cs3. Recently, it began giving me  an error meassage: " Adobe bridge cs3 cannot obtain files from this device. Please ensure that the device is connected properly,or that the battery is charged, adn try again".
I did both and that message still pops up. My usb ports are working fine as well as the usb cords(as far as I know of) and the batteries are fully charged when I do so. So what is the deal here??? If anyone can please help I would greatly appreciate it.
Thanks!!!

Maro,
I'm running VISTA on my PC. None of the suggestions solved the problem. I uninstalled iTunes removing all suggested files from another post and reinstalled iTunes 11.1.3 and removed the iTunes Ibarra from my iPhone Remote. I restarted the computer, iPhone & router. I added the iTunes library to my iPhone remote. I didn't get an icon on the menu bar of the iTunes on the PC but a dialog came up asking for the code which was on my phone. I typed in the code and the library showed up on my iPhone Remote. I selected it and got an error message that it couldn't connect. This is extremely weird and frustrating. What should I do now?
Jake

Similar Messages

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • Communication Failure: The computer is no longer able to communicate with your printer.

    Hello, I have a HP Officejet J6480 All-in-One printer.  When I try to print, I receive this error message:
    "Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
     I am using a Mac PowerBook G4, OS v10.5.7.  I have tried the following:
    -- rebooted my Mac
    -- turned printer off/on
    -- rebooted wireless router
    -- tried to print using USB cable.
    I continue to receive the same error message. Helllllllllllllllp!!!!
    A couple of other things I need to mention:  I bought this printer in June and have been able to print just fine since purchasing
    this printer. As recently as Friday, July 3, I was able to print and printed 6 or 7 pages then.  This is CRAZY!!!!
    Thanks.
    Barb
    Message Edited by BarbNPhx on 07-05-2009 10:55 AM

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • HP C4580: Communication Failure: The computer is no longer able to communicate with your printer.

    Hi,
    After having successfully set up the C4580 and run some test printouts which were all very satisfactory, this morning the above message appeared.
    The error message box suggests to "Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
    I tried this, but I'm still unable to print. Any suggestions? By the way my computer is a Mac if this helps.
    Many thanks

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • Fatal: Communication Failure: The computer is no longer able to communicate

    I was printing some documents and was doing great, all of a sudden the printer stopped and started showing this message;
    +"fatal: Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."+
    (the printer is a HP Photosmart 7760).
    I've done everything I could think of to fix the problem but nothing (deleted the printer, re-added it, downloaded the new driver from the website, turned off and back on, re-started the computer) but then, I really really screwed things up when I went and deleted the "PrintJobMgr/Contents/MacOS/PrintJobMgr"
    Wow! How smart. Now I'm trying to restore that file. I've looked in the internet to see if it is available, I got it from a friend but it doesn't work..
    Please, can somebody tell me what can I do at this point.
    Oh, I forgot to mention that the printer is connected to my Airport Extreme Router.
    Help!
    Message was edited by: sakko
    Message was edited by: sakko

    It sounds like you need to do a reinstall to get the PrintJobMgr back. I don't think you can use Pacifist (versiontracker.com) to install this separately, but it might be worth a try.
    Reinstalling the PrintJobMgr should get you back to where you started. At this point, I would disconnect all the cables, turn off the printer, let it sit for a bit, then reconnect and power up the printer.
    Hope this helps.

  • HP printer error: computer is no longer able to communicate

    I have an OfficeJet L7680 and a G5 iMac running OS 10.5.8. And for the last six months, every time I installed new software or hardware ANYWHERE the printer stopped communicating with displayed this message in the print queue window:
    "Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on"
    The standard 'fix' on this is to manually un-install the print driver and reinstall it. After doing this 3X on 3 computers, I discovered that running HP Setup Assistant seems to fix the problem -- so far, anyway.
    I know that many people have had this problem with generations of OS/X and HP printers, so I hope this is helpful.

    I just had a similar problem. I had a hard drive going bad and put in a new one and used time machine to recover from. For what ever reason I started getting the safe error message when I tried to print. The only solution I found that would work was to delete all of the printers and then reload.
    Strange to say the least. I have never really had any printer problems.
    CD

  • Why does my iPhone no longer give me the option to connect to my tv via Apple TV when on Safari as it previously did following my latest software upgrade?

    Why does my iPhone no longer give me the option to connect to my tv via Apple TV when on Safari as it previously did following my latest software upgrade?

    Thanks for your help, much appreciated.
    Same phone, same tv, same broadband network so everything the same so I assumed that it would.....just work!!! :-)
    I'm away this weekend but I'm going to turn off and reload the Apple TV to see if that might work.
    If not I may be begging your assistance again next week!!!
    Have a great weekend.

  • Why outlook2011 mac version* takes long time to boot with OSX

    why outlook2011 mac version* takes long time to boot with OSX

    Okay, so after doing all of the above, the computer still takes between 40 seconds and 1 minute or so to boot up, and the VersionCue messages still appear. However I discovered that the "kdcmond cannot retrieve..." messages disappeared after I disabled my ethernet connections. So at least I know that that had nothing to do with the extended boot-up time.
    I have heard that the more RAM you have, the longer it takes to boot due to the RAM count. Since I have 10 GB, maybe this is why?
    I've included the most recent Console messages below:
    22/4/08 9:56:16 AM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    22/4/08 9:56:16 AM com.apple.launchd[1] (com.adobe.versioncueCS3) Unknown key: ServiceDescription
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cups-lpd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:16 AM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    22/4/08 9:56:39 AM com.apple.SystemStarter[28] Starting Aladdin USB daemon
    22/4/08 9:56:39 AM org.ntp.ntpd[25] Error : nodename nor servname provided, or not known
    22/4/08 9:56:39 AM com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[74]) Exited: Terminated
    22/4/08 9:56:39 AM com.apple.launchctl.Aqua[90] launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/com.adobe.versioncueCS3.monitor.plist
    22/4/08 9:56:42 AM com.apple.launchd[82] (0x1011e0.VersionCueCS3monitor) Failed to check-in!

  • I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

    I have the iPhone and my own Apple ID. I would like the iPad to have my husbands Apple ID so we are able to communicate with each other (he is deaf). How can FaceTime and iMessage be set up to do this?

    Log into each device with your own Apple ID's in Settings > iCloud.
    Then, so you can share preiously purchased apps, log into both devices using the Apple ID used to make those purchases, but ONLY in Settings > iTunes and Apps Stores.
    Verify that each device uses your own Apple IDs in Settings > Facetime and Settings > Messages.

  • Genius no longer able to function with certain songs

    A couple of months ago I noticed that Genius was no longer able to work with certain songs that it had previously generated playlists for.
    If this were for little known artists then I could understand, but it is unable to generate playlists for ACDC - Highway to ****, and other 'big' artists.
    Does anyone have any ideas?

    A couple of months ago I noticed that Genius was no longer able to work with certain songs that it had previously generated playlists for.
    If this were for little known artists then I could understand, but it is unable to generate playlists for ACDC - Highway to ****, and other 'big' artists.
    Does anyone have any ideas?

  • Why will my iphone 4s not find any devices with blue tooth it just keeps on searching

    why will my iphone 4s not find any devices with blue tooth it just keeps on searching...??

    If you're trying to connect to another Apple device you can't, it's not supported.
    Here are the supported profiles http://support.apple.com/kb/ht3647

  • Will my computer be able to operate with adobe photoshop 5.0??

    I am needing to know if my computer will be able to operate with adobe Photoshop 5.0? I am strictly wanting to use this program for pictures that I take for fun(my kids & family) I just wanted a program where I could take black and white pics and then add color to different areas. My computer is a compaq presario 7600 with service pack 1 and it also says intell celeron cpu 2.53 ghz and 248 mb of ram. If my computer can't handle this software what would you suggest to get the feature that I want? I don't know alot about computers but I enjoy the photography part and want to be able to create unique pictures with a software program.
    Thanks!!!

    Tina....
    You could really do with more RAM in your machine. However, why not download the free 30 day trial version and see for your self.
    Colin

  • Why is there no scaling for high resolution monitors in Adobe Bridge CC?

    Why is there no scaling for high resolution monitors in Adobe Bridge CC?
    Photoshop CC, Illustrator CC and Indesign CC have 200% scaling for high resolution monitors in their preferences panel but Bridge CC does not, when will this feature be added to Bridge CC Adobe???

    qsea wrote:
    Why is there no scaling for high resolution monitors in Adobe Bridge CC?
    Photoshop CC, Illustrator CC and Indesign CC have 200% scaling…
    Inconsistency between or among applications in the artificial "suites" should come as no surprise.
    The "suite" concept is a fabrication of Adobe marketing and bean-counting types.  The engineering teams are totally independent of each other, they are not only in different buildings but in different cities and states of the American Union, even in different countries.
    The fact that they have little if any communication among them is highlighted by requests occasionally made in these forums by top Adobe engineers to let the other teams know when there are problems in one application that impact our workflow in another one.

  • I am not able to communicate with my instruments

    Hello,
    I am a graduate student in India. I
    am using NI PCI-GPIB card, which we bought nearly one year back. I am using
    LabVIEW 6i. For last two days I am not able to communicate with my
    instruments (Keithley DMM 196, Keithley current source 220, Lakshore
    temperature controller 93C).
    1. I started NI488.2 troubleshooting wizard. It says NI488.2 software
    presence verified, GPIB hardware presence verified,GPIB interfaces
    sequentially varified. This means Card is alright?
    2. I started MAX measurement and automation explorer. It lists GPIB0
    (PCI-GPIB) under 'devices and interfaces' folder. After selecting this, If
    I click at 'scan for instruments', 'Instruments not found' message
    appears.
    3. You may say that instru
    ments had problem. But the same instruments are
    working fine with another system with other card.
    4. I agin reinstalled PCI GPIB 488.2 driver from the CD. Now It is listing
    three instuments out of four. But the GPIB address for these instruments
    are
    not same as actual address. It also says instrument didn't reply for *IDN?
    query.
    5. Everything was working alright, this problem arose few days back
    suddenly.
    please help me

    Dear sir,
    Really something surprising. My instument is 'LakeShore DRC-93C'
    temperature controller. Probably bought around 7-8 years back.
    Here is the actual GPIB add & address read by MAX and correponding
    three NI-SPY log.
    actual GPIB add*****address read by MAX*****Max Capture(attached files)
    25***** 9*****capture_1
    21***** 5*****no file attached
    20***** 4*****capture_2
    17***** 1*****no file attached
    10***** instrument not found****capture_3
    7*****instrument not found*****no file attached
    for first four cases MAX showed 'instrument did not reply to *IDN? query?
    Same thing happened when I connected an Keithely Current Source.
    (only one instrument is connected,)
    actual GPIB add*****address read by MAX
    8*****instrument not found
    17***** 1
    25***** 9
    This means MAX is reading GPIB number 16 less than actual Number? Then I tried
    to write command at both GPIB address(actual and read by MAX) but both didn't work?
    What should I do next?
    with best regards
    Ram Shanker
    Attachments:
    Capture_1.spy ‏23 KB
    Capture_2.spy ‏23 KB
    Capture_3.spy ‏13 KB

  • After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad

    After an recent OS7 update my iPad2 requested a restore which I did, at the end my iPad jumped into "communicating with iTune" but it never communicates. I restored 3 time alreaady and I am not able to communicate with iTune to be able to use my iPad which is my working tool.
    What should I do?

    Communicate with iTunes? What does this mean? Tell us what you are seeing on your screen and what you then try to do?

Maybe you are looking for