Why is my ipod not responding?

Everytime I try to slide to unlock my itouch, it doesn't work.  please help me fix it.  thanks.

Try:                                               
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable       
- Try on another computer                            
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar                                     

Similar Messages

  • WHY DID MY IPOD NOT RESPOND TO MY TOUCH

    I think the reason why I cant use my iPod and is unresponsive to touch is because I left the portrait and landscape lock on too long. I forgot to turn it off. Well anyways, does anyone know how to fix it? I mean, I can still click the turn off/on button, but I cant shut it down because it needs me to slide to shut down and it wont let me, no matter how hard I try. PLZ HELP ME!! ;(

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar                              

  • HT4623 why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    why my iphone are not responding after i update the latest ios? and the screen displaying itunes icon

    You are in Recovery Mode. Follow the instructions below to recover your iPad.
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release the Sleep/Wake and Home buttons.
    3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button.
    5. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: You need to be patient and repeat the above many times to recover your iPad. Data will be lost.

  • HT1338 why is my keyboard not responding accurately?

    Why is my keyboard not responding??

    Hello:
    Go to system preferences>Bluetooth.  Highlight the device.  If the sidebar to the right does not show detailed information, click on the little gear and select "show more info." Then click on the gear again and select "favorite."
    Barry

  • Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough space available.

    Why does my Ipod not synchronize all playlists? Some get synchronized, others don't. Yet there is enough available space.

    The S.I. prefix Giga is used to mean both 1000x1000x1000 and 1024x1024x1024. Computer software typically uses the second version, but using the first number makes the same number of bytes appear bigger when expressed as Gb, so is favoured by hard drive manufactures.
    80Gb10 = 74.3Gb2
    It's a bit like specifying a quantity in gallons without saying whether they are US or Imperial gallons - everybody gets the same volume but one number will be bigger than the other. I could offer you a tank with 10 Imperial gallons of fuel in it - but if I tell you it's 12 US gallons it sounds like you're getting more for your money.
    Once the total size of your library exceeds the capacity of your device all you need to do is create some size limited playlists to determine what goes on the device. Don't sync all movies, sync one or two that you plan to watch soon. Likewise with TV Shows. Limit podcasts to unplayed episodes and finally create a music subset. What worked for me for some time was a smart playlist called Steve's Tunes defined as Playlist is Music and Playlist is not Exclude where Exclude was regular playlist that I would manually add to until Steve's Tunes was small enough to fit. These days I run an iPhone and have a number of smart playlists with ? Gb of most played, ? Gb of highly rated, ? Gb of recently added, ? Gb of essentials, ? Gb of unplayed etc. Each time I sync I get slightly updated selection without having to put any extra effort in.
    tt2

  • Why does my ipod not complete playing any song?

    Why does my ipod not complete playing any song?

    Do they play OK in iTunes on the computer?
    How long to they play
    Try a reset. Nothing will be lost.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • Why is my iPod not recognized in iTunes?

    Why is my iPod not recognized in iTunes?

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • Fourth Generation iPod not responding

    My friend has a fourth Generation iPod... it does not respond in any way. When plugged into computer, nothing shows up on computer. The battery is fully charged and yet all that appears on the front screen is the Apple symbol. What could possibly be the problem? What can we try? Any help will be appreciated!

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    http://www.rapidrepair.com/shop/g4-ipod-parts.html
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Why is my ipod not playing music through a docking station?

    Why is my ipod touch not playing music through a docking station?

    Did it work before with this iPod?
    Did you do something to the iPod since it last worked?
    Does the manufacture way it will work with your model iPod and its iOS?

  • Lastfmhelper? What is it and why is it always "not responding"?

    When ever I pull up Activity Monitor lastfmhelper is always red and not responding. Anyone have any idea what it is and why it's misbehaving? I noticed this because my 10.5.2 iMac Core 2 Due will all of the sudden become unresponsive. When I brought up Activity Monitor lastfmhelper was, as I said, red and "Not responding".
    Thanks

    It is not an OS X component so it must be from a third-party software product you've installed. A Google search only turned up a reference to a Windows file. There is a web radio site, Last.fm. You may be using software to access the site or installed software from the site to listen to their internet broadcast. If this rings a bell, then locate the software and uninstall it. It my not be compatible with Leopard.
    Uninstalling Software: The Basics
    Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Most applications create preference files which are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can located them in the above location and delete them, too.
    Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
    Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
    Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
    If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term.
    There are also several shareware utilities that can uninstall applications:
    AppZapper
    CleanApp
    Yank
    SuperPop
    Uninstaller
    Spring Cleaning
    Look for them at www.versiontracker.com or www.mackupdate.com.
    For more information visit The XLab FAQs and read the FAQ on removing software.

  • Why does my ipod not hold the battery charge

    my ipod has to be plugged in to come on and most of the time it wont come on it will just bring on the apple start up logo and then shut back off it keeps repeating this action

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar              

  • Why does my ipod not charge with usb hub in wall outlet?

    why does my ipod charge on my computer
    not charge with usb hub in wall outlet?

    Because the hub is not compatible with the iPod.
    Just use your computer or purchase a wall charger.

  • Why does my iPod not want to restore itself on iTunes?

    my ipod 5th gen stopped working a week ago after i tried updating it to ios 7 and told me to connect ot itunes. i connected it and said i have to restore it for some reason. then i updated the software for the ipod and after its done it disapears and my ipod is the same. Please help its driving me nuts.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                 
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar              

  • HT4236 Why will my iPod not sync all the photos I want it to - I get a message saying that it cant display certain images.  All my photos are in jpg format and similar size.

    Why will my iPod touch not sync all the photos I want it to.  I get a message saying it cant display some of my photos.  They are all in jpg. format and similar size. Never had any problems before!
    Thanks

    That sounds exactly like an issue that has plagued McAfee users for around a year.
    Try disabling email scanning in your anti virus program.

  • Why ichat says am not responding when i'm the one who's inviting a chat?

    my brother-in-law and i used to ichat. we downloaded "iglasses" and still there's no problem until there was this time all of a sudden(?) we can't connect. whenever each one of us invites the other, there is a funny (?) remark why we are not connecting - one who invites is not responding???? we send the details to apple....very long descriptions of error...
    the funny thing is whenever somebody invites both of us in a videoconference we are able to connect.
    he trashed the "iglasses" and upon the instructions of the apple rep, he reinstall all software including ichat...on my end, i trashed the "iglasses" (by simply dragging the application folder to trash and empty?) BUT i am very reluctant to re-install all software...i have some important updates etc....that i'm not sure i'm willing to risk to revert to my original factory set-up..
    will opening up ports as what apple has instructed "configure your network" helps?
    would appreciate help. thanks.

    Yeah, I feel your pain.
    I've learned that the "failed to respond" message is
    actually cryptic computer geek speak for "Sir, one or
    more of the ports the computer needs for iChatAV
    communication is not open or unavailable".
    There is handshaking going on behind the scenes
    between the two computers, and the computers use
    certain ports between the modems to carry on this
    conversation. As one or both of the computers use
    these ports a "failed to repsond" message will appear
    if one of these handshakes fails.
    Do you ever see "Error -8" as an error message? If
    so, that would confirm the port issue.
    You may want to contac RJinWI on this forum for more
    help.
    thanks for your help. truly appreciate the advice...
    i did actually read on the details of the error---those long jargon which for me is very "scary". i think i read on one of those lines error 8 (?). anyway, i did try to open "configure one's network" and now, am faced with numbers of ports to open for choices between configurations A and B...ports for incoming or outgoing packets...ports like TCP or UDP...concerns like making mac osx firewall active but not being able to send huge files versus opening all ports but be vulnerable...which numbers i would type in the ports...so on and so forth ...so decided to join this discussion....
    I read on one of those emails exchange in this forum by RJinWI about similar problem -- -"not being able to connect thru ichat"...i guess will need to contact him/her as you have advised. thanks again.

Maybe you are looking for

  • How to set an adapted project dashboard view as initial for all users?

    Hi all. We have the cProjects project dashboard active and have defined (via settings, save as) a custom view with the columns relevant in this particular installation.  I can however only save this view with assignment "user" meaning that it only ap

  • HT1391 how do you report an ipod touch stolen with serial number.

    I have the serial number of my ipod touch.  How do I report it stolen to apple?

  • Connection to partner timed out after 60s

    Hi, I have a scenario HTTP to RFC. Where the user posts the data using the URL I have provided to get the response back from SAP system. Everything is working fine. But today we had a strange problem. When the user tries to post the data to integrati

  • AnyConnect VPN Clients IP Address access rules

    I setup ASA5540 for SSL-VPN (clientless) works fine. But I try to use Client (AnyConnect) to access internal resources, it is failed.  It is stiil initiate sessions from remote client IP. I need to initiate session from client IP assigned by ASA5540

  • Hairline Crack Illusion from Screen Protector?

    Hi, I just got me new Iphone 5s from the verizon store . Long story short, they talked me into the case and screen protector which they installed. The screen protector is apparently tampered glass. I noticed there are two very small "specs" on the sc