Why is my ipod nto truning ontruning on, why is my ipod nto truning on, why is my ipod nto
My ipod touch is having a problem were when you turn it on the black screen turns white and does it all over again.
WHATS UP
Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Similar Messages
-
Why do duplicate albums appear on my i{Pod Classic screen when there are no duplicates in my iTunes Library?
It's probably going to be a capitalisation error. In other words, one or more tracks on the album has a lower case letter at the beginning of the album name while all the others have a capital letter. They can be difficult to spot.
In iTunes, examine one of your duplicated albums carefully. You should be looking for a slight difference between the album title name. Look at the screenshot below, can you see the error in the album title?
It is there...
The title track (Left Of The Middle). Look at the capitalisation of the album name.
Once you find you error in your album, re-type it (or copy-and-paste from one track to all the tracks) and then SYnc your iPod to iTunes. Does that cure it? If nto, let us know. -
Why has the new ipod nano no connector for a speaker dock? The white blank at the bottom looks as if one was intended, but then there were design problems?
IKR! But u an order a connector that can plug nto any old speakers and then connect to your charger port and it will play music!
-
My iPod Touch is running on ios 7. In the last two and a half all the apps of my iPod have been suddenly wiped out twice. I had to download all the apps all over again. Why has it happened?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Why does my ical on my ipod touch not sync with my ical on my desktop imac ical?
It will if I put it in on my desktop though.
Please help,
BrieProbably because you did not tell the iPod to sync the calendar in iTunes.
-
i was using an app while the battery ran over, then when i recharged my ipod, i can no longer open that app anymore. Why?
No idea why.
What have you tried to solve?
Have you tried the basics from the manual?
restart, reset, restore.
Have you tried removing the app, tehn adding it back? -
Why is my Ipod Touch no longer recognised by my computer. I have Vista
Why is my Ipod touch no longer recognised by my computer? please.
See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. -
Why isn't my iPod 6th generation not being recognized by iTunes?
Why isn't my iPod 6th generation not being recognized by iTunes?
Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes
-
my ipod touch 2g is no longer being recognized by itunes why and what can i do i have reset it and everything
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Ipod no longer syncs video. Why?
On the 20th July 2011 I updated to itunes 10.4, ever since then I have been unable to sync videos to my ipod. the program I use to convert videos has not changed. The video format has not changed. Aside from total size and length the videos are identical to each other only the ones transferred before this update are on the ipod, and any I attempt to transfer since do not.
Why?
There is no logical reason behind this, it is infuriating. All I get is a message telling me "cannot sync video to ipod as it is unable to be played on this ipod.". is there a way to get further information from this message? Is it possible for it to tell me the exact reason it refuses to transfer the file? that would be lovely.
All I want for Christmas is my videos on my ipod.Video format has not changed, aside from total size and length?
iPod has lower H264 format, up to 1.5mps 640x480.
iPod can play the following video formats:
* H.264 video, up to 1.5 Mbps, 640 x 480, 30 frames per sec., Baseline Low-Complexity Profile with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
* H.264 video, up to 768 kbps, 320 x 240, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
* MPEG-4 video, up to 2.5 Mbps, 640 x 480, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 kbps, 48 Khz, stereo audio in .m4v, .mp4, and .mov file formats
When you convert, go for the lower quality iPod format if you want to play it on iPod, else the new iTunes will convert to higher format of 1080p for iPhones, iPad
Good Luck! -
Why is my ipod gen2 no longer syncing podacasts. They appear on itunes page but will not transfer to ipod. Music is still working fine. Thank you.
If at all possible, copy your entire iTunes folder from your old computer to your new one (see http://support.apple.com/kb/HT4527). Otherwise, you will lose and music that was not purchased from the iTune store unless you use 3rd party software such as Touch Copy to transfer it to your new computer. See this article for how to move to a new computer with minimal or no data loss: https://discussions.apple.com/docs/DOC-3141.
-
Does anybody know why my ipod touch 3rd generations screen does not work show anything? The screen is all black like it is switched off, but my ipod synchronises to my iTunes library. It is fully charged. Please Help!!!
Try here:
iPod touch: Hardware troubleshooting -
Why exchange email will not work on my ipod touch, but ok on iphone
Why will microsoft exchange email not work on my ipod touch, but with the exact same settings, it works fine on my iphone? What is the reason for this?
Try a soft reset, press and hold both power and home buttons together until the Apple logo appears, about 15 seconds, then release both. If still no joy, go into Settings>General>Reset then tap Reset All Settings. If still no joy, back up your iPod to your computer then do a Restore to Backup, if that doesn't work Restore to new through iTunes. If a full restore to new does not work, you may have a hardware issue, contact Apple Genius Bar to have your iPod evaluated. Good luck, Cheers.
-
I HATE using iTunes (it's a pain in the bleeping arse) so, despite what someone from Apple told me, I tried to sync a song from Windows Media Player onto my ipod. The sync appears to be successful, and yet when I ejected my ipod to check to see if the song was on there, it was not. Why? And how do I get it on there? I want to avoid using iTunes at all costs.
Try MediaMonkey or Winamp. Unlike Windows Media Player which will just blindly throw the files onto the iPod's hard drive these two at least (there may be others) know that they have to update the device's database if you are going to be able to access the content that has been added.
tt2 -
HT1451 Why do the song names and cd name not show up on the IPod Shuffle?
Why do the song names and cd name not show up on the Shuffle?
MysticChyk wrote:
Why do the song names and cd name not show up on the Shuffle?
Err this is no longer April 1st you know.
The iPod Shuffle has never had a 'display' on which track names can be shown. See http://www.apple.com/ipod-shuffle/ if you want an iPod which does have a display on which you can see the tracks names and even the album cover art then look instead at the bigger and more expensive iPod Nano http://www.apple.com/ipod-nano/ or iPod Touch http://www.apple.com/ipod-touch/
PS. The current iPod Shuffle even though it has no display on which it can show the track names can read them out loud to you using a voice-synthesiser this is the VoiceOver feature described on the iPod Shuffle product page I listed above.
Maybe you are looking for
-
Default Setting for a Radio Group not activated when Read-Only
I have an Item on a page that is a Yes/No radio group. It is conditional read-only and has a conditional default value. Both the read-only section and the default section use PL/SQL blocks to determine there use. When the read-only condition is true
-
Creating MTA filters based on subject
hi, Could anyone help me out in creating MTA filter for bolcking mails based on subject of an email.In the documentation it says you have to do it using seive lang .If you have a sample template pls provide. rgds rajeev nair
-
Downloading javamail api... not sure what is the next step?
Hi.. I download the javamail stuff of this site... and inside the zip file... there were so jar files.. and some html files... where do I have to place the jar files?? on the server somewhere.. I am using tomcat?? thx
-
(The details are in the question already)
-
Does anyone know of a way to put a link to a document in GroupWise on the desktop? I would like to use Zenworks to launch a desktop icon to do that. Matt