Why is my ipod only allowing one speaker on my headphones to work?

my ipod is only playing music from one headphone speaker. it is not the headphones because i have tried multiple pairs. any ideas?

Try the standard fixes to rule out a software problem.
- Reset:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod.
If still a problemyou likely have a hardware problem. Likely the headhone jack is bad. Apple will only replace your iPod for a fixed price:
Apple - Support - iPod - Repair pricing
There are third-party places that will replace the headphone jack. Here is onep lace. Google for others.
DigiExpress.us - The iPad Repair Professionals

Similar Messages

My iPhone 5 is not charging properly and only the left speaker in any headphones is working

Hi folks my iPhone 5 is not chagrin properly and only the left speaker on any set of headphones is working how do I report to apple

Will not turn on, will not turn on unless connected to power, or unexpected power off
No sound through stereo headset

On my iPod touch why does it only allow one earphone to play? I've plugged the ear phone kno another device and they worked perfectly fine what is wrong with my iPod

On my iPod touch why does it only allow one earphone to play? I've plugged the ear phone kno another device and they worked perfectly fine what is wrong with my iPod

- Try inserting and removing the headphone plug a dozen or so times.
- Next try a reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If you still have the problem that indicates a hardware problem, like a bad headphone jack.

What are the limitations of AMS5 only allowing one-way broadcast for the video capture support?

I am interested in a tool that can access a clients webcam and begin recording from their device. When the time is up, it should store that recorded video to a server. Then, of course, the files can be accessed. Streaming is of less significance than simply capturing and accessing video from a client
Can I do this with only Adobe Media Server Standard Edition?
Bearing in mind, I may need to be capturing video from multiple clients at one time. Is this limited by the fact that Standard only allows "one-way broadcasts?"
Thanks,
Carl

Thanks for the suggestions. I've tried using DVCPRO HD in the past, but the picture quality of the captured screen footage turns out blurry. The only codecs I've found that provide a perfectly clear image are H264, Animation and Uncompressed 8-bit. The problem with the latter two is that video files lasting only a few seconds measure in the 100s of MBs. Working with files that large would slow my editing and rendering down to a non-workable length.
I just don't understand why I can't edit H264 video if my sequence codec is set to H264. The 'Codec error' I get is baffling.

Time Capsule only allows one Macbook be on the internet at a time!

So far no one even at Apple Care has been able to solve this problem.
My wife and i have brand new Macbooks. Mine, the latest 2.4Ghz black model bought in the UK and her's the 2.1Ghz bought in the US.
We both used the Orange livebox as our wireless router and it worked seamlessly (albeit only when security was turned off) until i purchased a 1TB Time Capsule.
I managed to get the TC up as our wireless router with the Livebox as the modem, but, bizarrely, it will only allow ONE computer to be on the internet at a time - and giving preference to mine. Basically, the second i turn my airport on - she loses connection! It's like my computer ***** the internet away from hers.
If hers is the only computer on in the house then it works perfectly.
I have spent hours on the phone to Apple Care and changed a number of the settings within Airport Utility, but the longest we got both computer running on the internet together was for about 20 minutes when i switched to Radio Mode 802.11n only (5 Ghz). For a moment we thought the problem was solved until i put the phone down and low an behold, she lost her connection once more.
Any suggestions?
Thanks in advance.

Don't know what an Orange livebox is, but I will treat it as a DSL modem and assume the ISP uses a DHCP server. Make sure you have connected the modem to the TC WAN port.
Open AirPort Utility, select the TC, click on Manual Setup, click on the Internet tab.
- is 'Connect Using:' set to 'Ethernet' - set to this if not.
- is 'Configure IPv4:' set to 'Using DHCP' - set to this if not.
- is 'Ethernet WAN Port:' set to 'Automatic (Default)' - set to this if not.
- is 'Connection Sharing:' set to 'Share a public IP address' - set to this if not (if set to Bridge Mode then only one computer will be able to use the internet).
Click 'Update and wait for TC to restart.
Check the network settings on the client computers. Go to System Preferences/Network/AirPort:
- click on the 'Network Name:' roll-button, select 'Join Other Network...', enter 'Network Name and select the security type you are using, and finally, enter your Password and click 'Join'.
If ISP uses DHCP:
- click on 'Advanced', TCP/IP and confirm that 'Configure IPv4:' is set to 'Using DHCP', click 'OK'.
- click the 'Apply' button and exit System Preferences.
May also be wise to Repair Permissions using Disk Utility and to reboot your network hardware:
1. Turn power off to ISP modem and the TC, and shutdown computer - leave power off for 10 minutes.
2. Turn on modem and wait for it to complete its test cycle. Then turn on the TC.
3. Turn on computer and check your internet connection.

Why does my ipod only show an apple and wont start up

Why does my Ipod only show an apple and wont do anything else> And holding down the two buttons has done nothing!

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Traffic only allowed one-way for VPN connected computers

Hello,
I currently have an ASA 5505. I have set it up as a remote access SSL VPN. My computers can connect to the VPN just fine. They just can't access the internal LAN (192.168.250.0). They can't ping the inside interface of the ASA, or any of the machines. It seems like all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping that VPN-connect machine from the ASA and other machines inside the LAN. It seems the traffic only allows one way. I have messed with ACL's with no avail. Any suggestions please?
DHCP Pool: 192.168.250.20-50 --> For LAN
VPN Pool: 192.168.250.100 and 192.168.250.101
Outside interface grabs DHCP from modem
Inside interface: 192.168.1.1
Current Running Config:
: Saved
ASA Version 8.2(5)
hostname HardmanASA
enable password ###### encrypted
passwd ####### encrypted
names
interface Ethernet0/0
switchport access vlan 20
interface Ethernet0/1
switchport access vlan 10
interface Ethernet0/2
switchport access vlan 10
interface Ethernet0/3
shutdown
interface Ethernet0/4
shutdown
interface Ethernet0/5
shutdown
interface Ethernet0/6
shutdown
interface Ethernet0/7
switchport access vlan 10
interface Vlan1
no nameif
no security-level
no ip address
interface Vlan10
nameif inside
security-level 100
ip address 192.168.250.1 255.255.255.0
interface Vlan20
nameif outside
security-level 0
ip address dhcp setroute
ftp mode passive
dns domain-lookup inside
dns domain-lookup outside
pager lines 24
mtu inside 1500
mtu outside 1500
ip local pool VPN_Pool 192.168.250.100-192.168.250.101 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
global (outside) 10 interface
nat (inside) 10 192.168.250.0 255.255.255.0
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
http server enable
http 192.168.250.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh 192.168.250.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
console timeout 0
dhcpd dns 8.8.8.8
dhcpd address 192.168.250.20-192.168.250.50 inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
enable outside
svc image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
svc image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2
svc image disk0:/anyconnect-linux-2.5.2014-k9.pkg 3
svc enable
tunnel-group-list enable
group-policy DfltGrpPolicy attributes
dns-server value 8.8.8.8
vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn
tunnel-group AnyConnect type remote-access
tunnel-group AnyConnect general-attributes
address-pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
group-alias AnyConnect enable
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: end

Hello,
I seem to be having the same kind of issue although I cannot ping from either end.
Ive set up a l2tp/ipsec vpn which I am able to connect to and get ip from my ip pool (radius authentication is working).
I tried running:
access-list NAT_0 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
nat (inside) 0 access-list NAT_0
but i get an error msg saying that the syntax of the nat command is deprecated. Im running ASA version 8.4.
Ive fiddled around abit to find the correct syntax but have been unsuccessfull so far.
Any help would be much appreciated
This is a part of my config:
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network AD1
host 192.168.1.31
description AD/RADIUS
object network NETWORK_OBJ_192.168.1.0_24
subnet 192.168.1.0 255.255.255.0
object network vpn_hosts
subnet 192.168.2.0 255.255.255.0
access-list AD_splitTunnelAcl standard permit 192.168.1.0 255.255.255.0
access-list split-acl standard permit 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip any 192.168.1.0 255.255.255.0
access-list inside_0_outbound extended permit ip object NETWORK_OBJ_192.168.1.0_24 object vpn_hosts
ip local pool POOL2 192.168.2.2-192.168.2.10 mask 255.255.255.0
nat (inside,outside) source static any any destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static NETWORK_OBJ_192.168.1.0_25 NETWORK_OBJ_192.168.1.0_25 no-proxy-arp route-lookup
nat (inside,outside) source static NETWORK_OBJ_192.168.1.0_24 NETWORK_OBJ_192.168.1.0_24 destination static vpn_hosts vpn_hosts
object network obj_any
nat (inside,outside) dynamic interface
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 ########## 1
no vpn-addr-assign aaa
no vpn-addr-assign dhcp

Can you change a PDF file to only allow one person have it open on a shared network?

At my office, we all work from the same network and are constantly sharing files. We need to add comments and edit PDF files. One thing I have noticed is that adobe will not tell you that someone else has the file open until you have made all your changes and are trying to save it. Is there anyway you can be notified when you open the file that someone else is in it or only allow one user to have it open at a time?
By the way... we are all using Adobe Acrobat X Standard

No, there isn't. The way you're using the file is not recommended. You
should use a review tracker to avoid getting in the way of one another.

WRT54G only allowing one unit to attach to static IP printer

Hello, I have a small network in a classroom with one printer with a network card.
I have made that printer a static IP 192.168.2.50.
Wireless PC' have no problem attaching and printing.
For some reason... when I attach a wired PC to that printer using an IP port connection using tcp/ip it only allows one PC at a time to attach.
Is this a setting in the WRT54G or should I look to the network card.

i don't think it has to do anything with the router...because had it been the router , even the wireless computers wouldn't have worked...
so it seems to me an issue between the network card...

My DSL provider says they only allow one wireless network--

My DSL provider says they only allow one wireless network. Can I do the following?
My existing wireless network consists of a single DSL/ActionTec modem connected to an Airport Extreme (configured using two additional Airport Expresses for wireless printing and air-tunes). I have great wireless coverage all through my house. My office is in a detached building about 200 feet from my house. I want to tap into my existing wireless system by running a Cat5 cable to my office and set up another Airport Express (and two more airport expresses for printing and air-tunes for my office). Would this technically be considered two separate wireless networks if I run the Cat5 cable between the two Airport Extremes (since there would only be one connection to the ActionTec DSL modem)? Would my DSL provider know I have established a secondary wireless network? Would my DSL provider have any ability to prevent these two separate networks from working properly on one DSL line?

It really doesn't make much difference. If you run it from your DSL modem, you will in effect have two separate networks, but they should still be able to talk to each other. If you run it from your Airport from the LAN prt, that will work too but the DHCP you will set up in your office will have to be different from your first Airport. For example: If your first Airport is set up to hand out IP addresses on the 10.0.1.X network, your office irrport will have as it's WAN IP 10.0.1.Y and the wirless IP Range will have to be something like 192.168.1.x. But again, it shouldn't make much of a difference either way. itunes etc, will still work.

I have time machine saving onto two usb drives. The backup is 4.6TB. Each drive is 6TB. Why is time machine only updating one drive? (The other has been the same for two weeks.)

I have time machine saving onto two usb drives.
The total size of the files being backed up is 4.6TB.
Each external USB drive is 6TB. So I have 12 TB of space for Time Machine.
Why is time machine only updating one USB drive? (One drive has been the same for two weeks.)
I have selected both drives in the Time Machine settings panel.
My understanding was that it would do a full backup, and then incremental backups of changed files, getting rid of old copies as needed, and alternate between the two drives.
But it looks like drive A has one complete backup, dated two weeks ago, and drive B is the only one getting action.
There is a red icon on drive one that says the drive needs 120GB more space to do a backup -- which is strange since the whole backup set is only 4.6TB in size, and the drive is 6TB in size...

You could try a clone instead.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Time Machine Versus Clones and Archives
Commonly Used Backup Methods

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After a

I purchased Adobe XI for a year. I am charged monthly on my credit card. The software only allows one print file to pdf after that it has a pop up marketing screen asking me to purchase it again. If I reboot I can get another print out of it. After an hour of trying to reach somone on tech support I ran across this forum. Any help out there?

In the pop-up screen, have you tried licensing it and signing in? Signing in is crucial, so it knows what you paid for.

TS3510 I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?

I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
Hope that helps get some on the right path to resolving their issues!

Only have one speaker working out of my ipod shuffle 4

I have only one speaker working out of my ipod shuffle ?
Is there anything I can do about this ?

its probably the headphone jack on your iPod. in which case you will have to replace it, ether thru apple or do it yourself via ifixit.com.
hope this helps!

Tried to order on-line - only allowed one bundle choice

My first one-year contract is up next month. I was exploring options on-line and the only bundle that came up was the Ultimate HD. A Verizon chat representative said that because I currently have the original Extreme HD their system will only allow me to upgrade to the Ultimate HD- I was not allowed to make a choice. If my contract is up, why can't I pick whatever new bundle I want? But no matter what you do the on-line system only gives you one choice - the most expensive one. This does not seem fair to me.

gene1802 wrote:
film 11 suggests I stick with the package I have ( the old Extreme HD). I would love to, but it that possible? My contract runs out in March - won't I be forced to choose a new version of the bundles?
Does your two year price guarantee expire in March or just your 1 year commitment?
When most of us signed up two years ago, it was a 1 year commitment, and a two year price guarentee. If that is your case, the bundle may not show the bundle as one single price after the first year, but the total will still equal the price of the bundle as mine does. As long as you make no changes, your programming and price will stay the same until the end of the second year.
If you wish to make any changes to say the new 25/25 Extreme bundle, you would need to call and have the change made over the phone. It is my understanding that the online system will only allow you to upgrade.

Why is my ipod only allowing one speaker on my headphones to work?

Similar Messages

Maybe you are looking for